SPECIAL REPAIRS TO TYPE IV AT VIKAS NAGAR CVRDE AVADI

Amount

Demolition of cement concrete (un reinforced ) in ground floors and pavings not exceeding 15 cm thickness(below or above ground level),complete all as specified and directed by Engineer-in-Charge.

Dismantling floor, hearth or wall tilling including cement mortar (but not backing ) all as specified and directed by Engineer-in-Charge.

M&L PCC 1:2:4 Type B0 (using 12.5 mm graded stone aggregate), as in floor of 25 mm thick complete all as specified and directed by Engineer-in-Charge.

M&L forScreed bed or bedding layer 15mm thick in CM 1:6 for laying floor finishes complete all as specified and directed by Engineer-in-Charge.

M&L for Vitrified Ceramic tiles 10mm thick (Squre/rectangular) polished,area of each tiles not exceeding 0.36 sqm,in floors etc.set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed by Engineer-in-Charge.

M&L for Vitrified Ceramic tiles 10mm thick (Squre/rectangular) polished,area of each tiles not exceeding 0.36 sqm, in skirting, dados etc.set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick plaster in CM 1:3 complete all as specified and directed by Engineer-in-Charge.

M&L non skid coloured ceramic tiles 7 to 8mm thick area of each tiles (square /rectangular) area of each tile exc 0.06 sqm but not exc 0.11 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match all as specified and directed by Engineer-in-Charge.

M&L glazed coloured ceramic tiles in vertical surfaces 450 x300x 8mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including10mm thick CM 1:4 rendering on wall surfaces finished fair & even to receive tiles all as specified and directed by Engineer-in-Charge.

M&L granite (of any type) 20mm thick black coloured slab in single piece for platform of kitchen/WHB, machine cut bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match over 15mm thick screed bed in CM1:4 the shade of granite stone including grinding and polishing complete all as specified and directed by Engineer-in-Charge.

M&L vitreous china sqatting pan orissa pattern size 580x440mm white with integral foot rests, squatting pan including connecting to trap and including provision of PVC valveless syphonic action type flushing cistern 10 litrs capacity low level white colour complete all as specified and directed by Engineer-in-Charge.

S&F in repairs vitreous china washdown water closet pan (pedestal pattern) white including connecting to trap and including provision of PVC valveless syphonic action type flushing cistern 10 litrs capacity low level white colour complete all as specified and directed by Engineer-in-Charge.

S&F PVC connections 15 mm size with PTMT nuts of length 450mm all as specified and directed by Engineer-in-Charge.

S&F PVC connections 15 mm size with PTMT nuts of length 600mm all as specified and directed by Engineer-in-Charge.

S&F in repairs Pillar taps 15mm dia bore fancy type, cast copper alloy with capstan heads, chromium platted screwed down high pressure with or without lettered HOT or cold with long screwed snates and fly nuts, screwed for iron pipe all as specified and directed by Engineer-in-Charge.

S&F in repairs Bib cock 15 mm dia bore fancy type CP screwed down screwed for iron pipe or for brass ferrule all as specified and directed by Engineer-in-Charge.

S&F in repairs stop valves / angle cock 15mm dia bore fancy type cast copper alloy screwed down high pressure with butter fly handle all as specified and directed by Engineer-in-Charge.

S&F PVC (SWR) floor trap 75 mm dia bore plain with grating lincluding jointing with solvent cement all as specified and directed by Engineer-in-Charge.

S&F in repair grating doom 100mm dia of PTMT (Minium weight 25 gms) all as specified and directed by Enginner in Charge

S &F SGSW gully traps squares 150 X 150mm size type P as in repairs ll as specified and directed by Engineer-in-Charge.

S&F in repair Gun metal, globe or gate valves, 15 mm dia bore with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed by Engineer-in-Charge.

S&F in repair Gun metal, globe or gate valves, 20 mm dia bore with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed by Engineer-in-Charge.

S&F rolled mild stel section in stair/ledder (framed) including stringers, treades, landing, balusters, hand rails and window grills etc including cleates, brackets etc of Fe-410-W(Gde-E-250) quality B complete all as specified and directed by Engineer-in-Charge.

S & F Galvanized steel water tubing 15mm dia bore, medium grade including provision of all fittings such as bends, tees, elbows, reducers, unions, plugs, sockets etc., fixed complete to walls and ceilings including taking old GI pipe all as specified and as directed by the Engineer-in-Charge.

S & F Galvanized steel water tubing 20mm dia bore, medium grade including provision of all fittings such as bends, tees, elbows, reducers, unions, plugs, sockets etc., fixed complete to walls and ceilings including taking old GI pipe all as specified and as directed by the Engineer-in-Charge.

S & F Galvanized steel water tubing 25mm dia bore, medium grade including provision of all fittings such as bends, tees, elbows, reducers, unions, plugs, sockets etc., fixed complete to walls and ceilings including taking old GI pipe all as specified and as directed by the Engineer-in-Charge.

S&F in repairs Roatatinal moulded polythen water storage tank 1000 litres capacity (cylindrical vertical with closed top ) hoisted and fixed in position including dismantling of existing tank all as specified on SSR part I all as specified and as directed by the Engineer-in-Charge.

S&F in repairs Tubular towel rail 20mm dia D type 60cm long between flanges brass chromium plated all as specified and as directed by the Engineer-in-Charge.

S&F in repairs vitreous china wash hand basin white flat back size 550 x 480 mm including waste, plug, procelain stopper brackets etc. complete all as specified and as directed by the Engineer-in-Charge.

S&F chromium plated fancy type Health faucet 15mm dia bore ABS body SS braided hose 1.00 metre long with CP hook and fixed in repairs complete all as specified and as directed by the Engineer-in-Charge. Make: Hindware (F 160068CP) or equivalent make given in PS.

Taking down cement plaster on brick walls including racking out joints, hacking for key scrubbing down with water etc.

Rendering 15mm thick in fair faces of brick work or concrete surfaces in CM 1:4 finished even and smooth with out using extra cement but using water proofing compound all as specified.

Rendering 10mm thick in fair faces of brick work or concrete surfaces in CM 1:6 finished even an smooth with out using extra cement all as specified.

Rendering 5mm thick on ceiling or concrete surfaces in CM 1:3 finished even and smooth with out using extra cement all as specified.

Preparation of newly plastered surfaces of walls and applying two coats of exterior emulsion paint over a coat of primer complete all as specified and as directed by the Engineer-in-Charge.

Preparation of new plastered RCC surface of ceiling and appy three coat of white wash complete all as specified and as directed by the Engineer-in-Charge.

M&L preparing old decorated wall surfaces and applying one coat of oil bound distemper complete all as specified and as directed by the Engineer-in-Charge.

M&L preparing new wall surfaces and applying two coat of oil bound distemper over a coat of primer complete all as specified and as directed by the Engineer-in-Charge.

Preparation of plastered surfaces of walls and applying one coats of exterior emulsion paint complete all as specified and as directed by the Engineer-in-Charge.

Taking dowin chowkats with shuttrs (without taking of shuttrs ) exc 1.5 sqm but not exc 4 sqm each) complete all as specified and as directed by the Engineer-in-Charge.

Taking down chowkats with shutters (without taking of shutters ) not exc 1.5 sqm complete all as specified and as directed by the Engineer-in-Charge.

Taking down steel window / ventilators of any size including making good disturbed portion of wall / plastering with CM1:3 complete all as specified and as directed by the Engineer-in-Charge.

S&F Second class hard wood pain solid straight chowkhat and frames, wrought, framed rebated on the solid rounded or chamfered put together with glue pinned at joints all as specified and as directed by the Engineer-in-Charge.

S&F Second class hard wood factory made glazed skelton shutters 35mm thick open rebated and prepared to received glass, gauge etc but divided into squares with plain chamfered rounded mitered and rebated cash burns any numbers using 2nd class hard wood as specified in SSR Part I, Section 8, clause 8.24(a) fitted to chowkats complete all as specified and as directed by the Engineer-in-Charge.

M& L Second class hard wood plain, framed pannelled shutters 35 mm thick factory made (any number o panes ) with panes of timber flat on both sided (featheredged) or of veneered particle board medium density wood particle board with commericial face veneers supplied and fitted to chowkats complete all as specified and as directed by the Engineer-in-Charge.

S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top and bottom rails, MS frame shall be covered with heat moulded plain colour PVC "C' channel having a PVC sheet strip of 20 mm widht stuck inside with solvent cement for striles and plain colour PVC sheet for top rail lock rail and bottom rail on eitherside and as gap insert for top rail and bottom rail panelling of plain colour PVC sheet to be fitted in the MS foame welded /sealed to the stiles and rails with suitable PVC sheet beading and joned to gether with solvent cement, supplying and fixing in the fame at site as per specification and drawing all as specified complete all as specified and as directed by the Engineer-in-Charge.

S&F solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet rreinforced with MS square tube , supplying and fixing in opening as per specification and drawing all as specified.

S&F Factory made UPVC window and ventilators including UPVC frame of size 42x40mm and side hung glazed shutter including 5mm thick glass and required accessories such as friction stay hinges, handles etc, complete all as specified and directed Engineer-in-Charge.

S&F Factory made UPVC window and ventilators including UPVC frame of size 42x40mm and side hung glazed shutter including stainless steel wire cloth 0.36mm and of aperture 1.40mm and required accessories such as UPVC projected hinges, handles etc, complete all as specified and directed Engineer-in-Charge.

S&F Aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples complete all as specified and directed by Engineer-in-Charge.

S&F aluminium anodised barrel tower bolt 200 mm long of extruded section complete all as specified and directed by Engineer-in-Charge.

S&F aluminium anodised handle cast type 150mm long extruded sectin fabricated type complete all as specified and directed by Engineer-in-Charge.

S&F butt hinges medium weight cold rolled mild steel 100mm size length complete all as specified and directed by Engineer-in-Charge.

S&F Aluminium alloy anodised sliding door bolt 300 mm long with hasp, staple (bolt type) and fixing clips of sheet cast or extruded section and fixing boltsand sliding bolts of extruded sectin or cast aluminium alloy and fixed complete all as specified and directed by Engineer-in-Charge.

S&F floor door stopper of Aluminium body and tongue anodized with hand drawer steel spring fixed of 140mm complete all as specified and directed by Engineer-in-Charge.

S&F springs for doors 300 mm mild steel ordinary rat tail rod pattern springs including rollers and roller platecomplete all as specified and directed by Engineer-in-Charge.

S&F MS section of size 25 x3mm flat iron for hold fasts complete all as specified and directed by Engineer-in-Charge.

Preparing surface of steel treating small articles holdfast back of chowkats treated with tar or coal tar black paint complete all as specified and directed by Engineer-in-Charge.

M&L PCC bed blocks type B1 1:2:4 (20mm graded aggregate)complete all as specified and directed by Engineer-in-Charge.

M&L Preparation of new wooden surfaces of any description not otherwise described over 10cm width or grith and applying two coats of synthetic enamel paint over pink primer complete all as specified and directed by Engineer-in-Charge.

M&L Preparation of old steel surfaces of any description over 10cm in width or grith ot otherwise described applying two coats of synthetic enamel paint over red oxide primer complete all as specified and directed by Engineer-in-Charge.

S&F sheet glass 4mm thick tinted glazing with oil putty in sqare exe 0.5sqm in each pane complete all as specified and directed by Engineer-in-Charge.

M&L prelaminated particle board 19mm thick interior grade one side with decorative choice laminatin and other side balancing with white lamination fixed in cupbords or nerrow widthts, rebated or flat edged with crews to timber frame work fixed in repairs complete all as specified and directed by Engineer-in-Charge.

M&L Second class soft wood as in scantling clean sawn, timber framed and fitted complete all as specified and directed by Engineer-in-Charge.

M&L Second class Hard wood plain filletes, square, rectangular or triangular in section wrought, secured with nails or breads of sectional area n. exc 3 sq cm complete all as specified and directed by Engineer-in-Charge.

M&L Varnishing two coats on new or previously untreated surfaces including sizing, filler coat of thin varnish, staining with oil fany descrption n exc 10 cm width or grith complete all as specified and directed by Engineer-in-Charge.

S&F continuous (Piano) hinges 30 mm width mild steel bright finished or electro galvanised complete all as specified and directed by Engineer-in-Charge.

S &F cupboard knobs 40 mm dia fixed with nut screw and washer of mild steel brite finished complete all as specified and directed by Engineer-in-Charge.

Hasp and staple safety type 100 mm aluminium anodised with miled steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed by Engineer-in-Charge.

S&F extruded aluminium alloy handles 125mm long fabricated type anodised complete all as specified and directed by Engineer-in-Charge.

S&F aluminium anodised barrel tower bolt 100mm long of extruded section and fixed complete all as specified and directed by Engineer-in-Charge.

S&F for Harrison rail fancy type with brackets stops roller etc complete all as specified and directed by Engineer-in-Charge.

Demolition of cement concrete in floors/roof surfaces including removal of old tarfelt,plastering,concrete mugs,tiles etc upto the original RCC roof level complete all as specified and directed by Engineer-in-Charge.

M&L for PCC 1:2:4 Type B0 using 12.5 mm graded aggregate in roof as levelling course, kerbs or mud stops, rounded or chamfered on edges complete all as specified and directed by Engineer-in-Charge.

M&L for Screed bed 10mm thick in CM 1:3 including WPC @3% of cement weight on concrete surfaces complete all as specified and directed by Engineer-in-Charge. (Note : WPC shall be measured and paid separately)

Supply only Integral water proofing compound all as specified and directed by Engineer-in Charge.

M&L for APP based polymeric membrane minimum weighing 3.0Kg/Sqm and minimum 3mm thick reinforced with polyster non woven fabric (wt not less than 160gm/sqm) laid over primed surfaces on roof surfaces/sunken portions all as specified and directed by Engineer-in -charge.

M&L for applying one coat of bituminions primer conforming to IS-3384 @0.3 Liter/Sqm over roof surfaces/sunken portion all as specified and directed by Engineer- in-Charge.

M&L for applying one coat bitumen grade 85/[email protected]/sqm all as specified and directed by Engineer-in-Charge.

M&L for applying two coat aluminium paint@100ml/Sqm over APP membrane all as specified and directed by Engineer-in-Charge.

Cutting grooves in brick wall 75mm wide and 65mm deep and shaping the horizontal surfaces of groove with cement mortar 1:3 all as specified and directed by Engineer-in-Charge.

Demolition and breaking up drain pipes (Salt glazed ware,AC orreinforced concrete) any dia all all as specified and directed by Engineer-in-Charge.

S&F PVC (SWR) pipes 75 mm dia bore single socketed in any length with rubber ring joints, fixed to walls including necessary scaffolding upto the hight of building from ground level all as specified and directed by Engineer-in-Charge.

S&F PVC (SWR) pipes 110 mm dia bore single socketed in any length with rubber ring joints, fixed to walls including necessary scaffolding upto the hight of building from ground level all as specified and directed by Engineer-in-Charge.

M&L PVC (SWR) bends in 75 mm dia bore any radius all as specified and directed by Engineer-in-Charge.

S&F PVC (SWR) vent cowl 75 mm dia bore complete all as specified and directed by Engineer-in-Charge.

S&F PVC (SWR) vent cowl 110 mm dia bore complete all as specified and directed by Engineer-in-Charge.

S&F PVC (SWR) branch piece 75 mm dia bore, single (single Y) equal or unequal complete all as specified and directed by Engineer-in-Charge.

S&F PVC (SWR) branch piece 110mm dia, single (single Y) equal or unequal complete all as specified and directed by Engineer-in-Charge.

S&F PVC (SWR) junction single 75mm dia, (single T) equal or unequal complete all as specified.

S&F PVC (SWR) junction single 110mm dia, (single T) equal or unequal complete all as specified.

S&F PVC (SWR) junction double 75mm dia bore, (double T) equal or unequal complete all as specified and directed by Engineer-in-Charge.

S&F PVC (SWR) junction double 110mm dia bore, (double T) equal or unequal complete all as specified and directed by Engineer-in-Charge.

S&F Stainless steel plate rack of size 36" x 30" x 12" including taking down old rack of any type complete all as specified and directed by Engineer-in-Charge.

S&F Stainless steel sink with drain board made out of 1.00mm thick sheet of kitchen or laboratory with plug, washers, waste pipe, cast iron cantilever brackets or bedding in cement mortar on to dwarf wall, connecting union overall size 915mm x 460mm with bowl size 410mm x 330mm x 160mm including stainless steel coupling fitting 40mm dia suitable for SS sink, waste pipe and rubber washer complete all as specified and directed by Engineer-in-Charge.

Taking down carefully point wiring of any type complete for light, fan, socket or power point with fittings & fixtures including making good disturbed surface to match the existing surface complete all as specified and directed by Engineer-in-Charge.

M&L for Point wiring with PVC insulated, FRLS PVC unsheathed, two single core, stranded, copper conductor cable 1.5 Sqmm size, 1100V grade, drawn into and including concealed rigid non-metallic PVC conduit not less then 20mm wide, ISI marked with 1.5 Sqmm unsheathed, stranded copper FRLS cable for continuous earth wire and including pressed modular metal concealed terminal boxes of required size and suitable size inner frame with outer cover suitable for modular switches/sockets/regulators all as specified & directed for the folowing :-

(a) One light/Fan controlled by one switch

(b) One point for socket outlet 5 amp independent board

(c) One point for socket outlet 5 amp same board

(d) One bell/buzzer point controlled by one push button on the same board with other switches or independent.

(e) One 3/5 pin 15 amp socket outlet point controlled by one switch using 4 sqmm copper conductor FRLS cable with continuous earth wire of 4.0 sqmm copper conductor FRLS cable on independent board

S&F modular switch piano flush type, 6 amps, 230V AC, single pole, one way complete all as specified and directed by Engineer-in-Charge.

S&F modular switch piano flush type 16 amps, 230V AC single pole one way complete all as specified and directed by Engineer-in-Charge.

S&F modular socket out let multipurpose suitable for 2/3 pin 6 amp flush type complete all as specified and directed by Engineer-in-Charge.

S&F modular socket out let 2 in 1, 3/6 pin 6 and 16 amp flush type complete all as specified and directed by Engineer-in-Charge.

S&F Modular fan step regulator, 120 W-2 module complete all as specified and directed by Engineer-in-Charge.

S&F ceiling rose, surface type, bakelite 65x50mm three terminal complete all as specified and directed by Engineer-in-Charge.

Supply and fix musical Bell AC 220 V single pole complete all as specified and directed by Engineer-in-Charge.

Supply and fixing single pole and neutral sheet metal enclosure with a two pin and earth plug and socket complete with one single pole MCB, 25 amp, 240 volt complete complete all as specified and directed by Engineer-in-Charge.

M&L submain wiring two run of FRLS PVC insulated cable, 4 sqmm nominal cross sectional area stranded copper conductor and one run of green FRLS PVC insulated 4 sqmm stranded copper conductor earth continuity cable drawn through non metallic rigid PVC conduit not less than 20 mm dia including all conduit and fixing accessories complete all as specified and directed by Engineer-in-Charge. Note: 3 run of copper conductor and one run PVC conduit shal be measured as one unit.

S&F lamp holder insulated body with straight / angle type with back plate for batten fittings complete all as specified and directed by Engineer-in-Charge.

Taking down the ceiling fan, sealing cable end, dismantling blades and Hanging only ceiling fan and connecting up including provision of cable from ceiling rose or connector to fan complete after necessary painting all as specified and directed by Engineer-in-Charge. Note: Fan painting shall be measured and paid separately

M & L spray painting of ceiling fan complete, with two coat of synthetic enamel paint incl filling cavities with filler, one coat after cleaning all dust etc. including re-writing MES No on the body of fan, using black paint complete all as specified and directed by Engineer-in-Charge.

S&F non metallic PVC rigid conduit ISI marked not less than 25 mm dia and fish wire concealed for cable TV/ telephone wire including cutting chases and making good of disturbed surface with CM: 1:3 complete all as specified and directed by Engineer-in-Charge.

S&F non metallic PVC rigid conduit ISI marked not less than 20 mm dia concealed for cable TV/ telephone wire including cutting chases and making good of disturbed surface with CM: 1:3 complete all as specified and directed by Engineer-in-Charge.

S&F Pressed sheet metal enclosure (MCB DB), 8 way single phase and neutral with 200 Amps rated bus bar, double door type, 240 volts complete all as specified and directed by Engineer-in-Charge.

Taking down main switches, distribution board, steel enclosure with MCB’s any way and rating including wooden board or from steel board and making good disturbed surfaces complete all as specified and directed by Engineer-in-Charge.

S&F MCB single pole, 240 volts, 6 to 32 amps, 'C' series, 10 KA breaking capacity & connection complete all as specified and directed by Engineer-in-Charge.

S&F MCB single pole & neutral, 32 amps, 240 volts, 'C' series, 10 KA breaking capacity & connection complete all as specified and directed by Engineer-in-Charge.

S&F switch type TV socket set including MS box with cover plate complete all as specified and directed by Engineer-in-Charge.

S&F switch type Tele socket set including MS box with cover plate complete all as specified and directed by Engineer-in-Charge.

S&F LED light fitting batten type of capacity 2000 lumen with nano diffuser techonology, 4 feet length with zero mercury content, mounted on two MS conduit of 15 mm bore each of length 600 mm including connection complete all as specified and directed by Engineer-in-Charge. Make : Havells Cat Part No ENDURALINEARNEOBS20WLED830 SPCWH or techno commercially equivalent in C&S/Wipro.

S&F LED light fitting batten type with of LEDs of capacity 1000 lumen with nano diffuser techonology, 2 feet length with zero mercury content including connection complete all as specified and directed by Engineer-in-Charge. Make : Havells Cat Part No ENDURALINEARNEOBS10WLED 865SPCWH or techno commercially equivalent in C&S/Wipro.

Wall mounted light fitting 15 watt, made up of polycarbonate, suitable for self ballasted with LED lamp including connection with suitable PVC copper cable, complete all as specified and directed by Engineer-in-Charge. Make :Havells, Cat Part No. LHDL07150099 or techno commercially equivalent in C&S/Wipro.

Supply and replace existing security light fitting with road lighting LED lumninaire with high power capacity 3000 lumen including mounting bracket of GI Pipe 25 mm bore bend to shape with 2 Nos MS flat 32 x 3 mm thick with suitable nuts & bolts for mounting the fitting all as specified and directed by Engineer-in-Charge. (Make : Havells cat Part No ENDURACITYLITEPLATSL30WLED757 SASYBOPC or techno commerically equivalent in C&S/Wipro)

S&F LED lamp 15W all as specified and directed by Engineer-in-Charge. Make: Havells cat part No E27 WW Ball lamp or techno commerically equivalent in C&S/surya

Over hauling of ceiling of any sweep/ make i.e. opening of fan and cleaning ball bearing, filling grease/oil and changing of cotter pin, nut, screw, check nuts and bolts, ball bearing, metal bush bearing as required including cleaning of body, blades, down rods, canopies etc and re-assembling complete ll as specified and directed by Engineer-in-Charge.

Supply only fan condenser 2.5 mfd, AC 230 V, 50 Hz all as specified and directed by Engineer-in-Charge.

M&L re-winding of ceiling fan of any sweep / make with insulated copper winding as per existing winding including testing complete all as specified and directed by Engineer-in-Charge.

S & F fan hook suitable for 40mm dia pipe, made out of MS flat iron of size 50 x 6mm including suitable size of nut, bolt & washer complete ll as specified and directed by Engineer-in-Charge.

M & L for coaxial cable for cable network (TV socket) with one single core PVC insulated 9.5 Sqmm size all as specified and directed by Engineer-in-Charge. Make : Finolex/Gloster/Havells/Polycab

M&L for telephone cable with pair of high conductivity copper wires cable, PVC insulated complete all as specified and directed by Engineer-in-Charge. Make : Finolex/Gloster/Havells/Polycab

S&F factory made double door panel board, indoor type, CRCA sheet 2 mm thick powder coated of suitable size, wall mounted type partially grouted in wall and with locking arragement, handle and including provision of following MCB and suitable copper cable connection between MCB and connection all as specified and directed:- (a) MCB TPN 63A, 415 volts,C Series - 01 Nos (Incoming) (b) MCB, SPN , 6-32 Amp, 230 volts, C Series - 05 Nos (outgoing) (c) Fixing only existing energy meter of old DB-02 Nos

M & L Earthing complete with galvanised steel earth plate electrode 60x60cm x 6.0mm thick burried directly in ground (earth pit not less than 2.25 mtr deep below ground level) with top edge of the plate not less than 1.5 mtr below normal ground level, connected to and including using of 4 mm GI wire as earthing lead by means of bolts, nuts, check nuts and washers of galvanised steel , connected to earthing test point, all as specified & indicated, including testing on completion including earth work and excavation in any type of soil/rock, PCC 1:3:6 type C1, earthing chamber, precast RCC slab 50mm thick in cement concrete 1:2:4 type B1 reinforced with welded steel wire febric weight hot less than 4 Kg/Sqm, funnel with GI watering pipe of 20mm bore, medium grade wire mesh and lugs, GI protection pipe of 15mm bore light grade upto 7.50 mtr long test point and testing complete etc all as specified and directed. Note: (i) Cost of GI earth lead wire and GI protection pipe upto 7.5m length deemed to be included in the rate quoted. (ii) Quoted rate shall deemed to include the cost of excavation and earth work in any type of strata.

K Kumar Construction