COMPREHENSIVE MAINTENANCE OF ELECTRICAL PASSENGER LIFTS (TOTAL 16 NOS) AND REPAIR/REPLACEMENT OF LOP, COP, DOOR HEADER AND MISC ITEM AT RANGPURI UNDER GE(U) P AND M DELHI CANTT-10.

Amount

SECTION-I Comprehensive maintenance of installed lift in reliable safe and efficient operating condition through MOU with OEM by regularly examining, lubricating and adjusting the equipments and carry out planned maintenance in systematic and controlled manner suitable for serving Ground + 4 floors (total five landings) with electric power operated doors, auto electric levelling device installed complete all as specified and directed. Location ;- Tarapore Enclave ( Rangpuri) Block No p-07 to P-22 = 16 Nos lifts Capacity of Lift : 13 Passenger Lift Make - T K Elevators India Pvt Ltd. Total Lifts = 16 No Lift Total Qty = 11 x 16 = 176

Supply and fixing hoist rope of size 8 x 19 strands of dia 08 mm heavy duty suitable for 13 passenger lift serving Ground + 4 Floors = 5 landings (make of lift M/s TK Elevator India Pvt. Ltd.) including taking down old unserviceable one complete all as specified and directed. (Make:- USHA MARTIN/ MAHADEV ELEVATOR/ BHARAT WIRE ROPE LTD/ SHREE STEEL WIRE & ROPE LTD.).

Taking down & supply and fixing in replacement of Landing Operating Panel ( LOP) simplex one button type including necessary wiring complete suitable for Ground & top floor (G+4) floors arrangement in 13 passenger Thyssenkrupp make lift complete all as specified and as directed. (Make: As per OEM recommended)

Taking down & supply and fixing in replacement of Landing Operating Panel ( LOP) simplex double button type including necessary wiring complete suitable for 1st , 2nd, 3rd floor in (G+4) floors arrangement in 13 passenger Thyssenkrupp make lift complete all as specified and as directed. (Make: As per OEM recommended)

Taking down & supply & fixing in replacement of full lenth Infrared door sensor as per sample at site with IP-65 rating and housed in slim aluminium profile suitable for 08/13 passenger Thyssenkrupp make lift complete all as specified and as directed. (Make: As per OEM recommended)

Supply & fixing in replacement of UPS 700 VA, 230V, 50Hz capacity including battery bank and necessary electrical wiring arrangement complete as per site requirement for manual breaking and control of lift in emergency situations in MRL arrangement complete all as specified and as directed. ( Make: As per OEM recommended)

Supply, fixing, testing and commissioning of ARD (Automatic Rescue Device) 2.2 KVa suitable for 13 passenger lift including necessary internal wiring work, suitable for 13 passenger lifts including ARD batteries as per site requirement lift installed at Tarapore Enclave including taking down of old unserviceable one complete all as specified and as directed. (Make - As per OEM TK Elevator) (Make of battery:- EXIDE/ AMARON/ STANDARD FURKKAVA)

Taking down and supply & fixing in replacement of OSG Pit wheel made of cast iron complete set suitable for 13 passenger lift ( Mke of lift - M/s Thyssenkrupp Elevator) all as specified and directed. (Make: As per OEM recommended)

Taking down & supply and fixing in replacement of Fireman switch Assembly including necessary electric wiring complete suitable for Ground+8 floor ie total nine landings for 08/13 passenger Thyssenkrupp make lift complete all as specified and as directed. (Make: As per OEM recommended)

Notes :- ( for Item No 1 to 9) (i) The repair work shall be done through OEM of existing lifts i.e. of M/s T K Elevator India Pvt. Ltd.. (ii) The contractor will have to submit MOU on stamp paper of Rs 100/- duly notarized, as per specified Performa from OEM of existing lifts i.e of M/s T K Elevator Pvt. Ltd.. within twenty eight days from date of Acceptance of tender, failing which the contract will be liable to be cancelled and further action to be taken as per policy in vogue of the contractors default.

Taking down & supply and fixing in replacement of new Hooters of 0.5 km range, rechargeble bty, speaker & PCB card and complete wiring for lift installed at various locations size 10x4x8, metal body , 230 V suitable for ThyssenKrupp make lift complete all as specified and directed.

Supply and fixing in replacement of 300mm sweep car cabin fan,single phase, 950 rpm in lift with necessary electric connections complete all as specified and as directed . Make:- Havells/ Bajaj/ Crompton

Material and labour in replacement of maintenance free ARD batteries 12Volt, 17/18 AH sealed lead acid battery suitable for ARD/UPS complete incl necessary electrical connections complete all as specified and as directed. Make:- Exide/ Amaron/Standard Furkkava

Material and labour for fixing of mirror 4 mm thick inside the car cabin including aluminium outer frame of mirror and all fixing acessories for passenger/ goods lifts including taking down old unservicable one complete all as specified and directed.

Material and labour for fixing hand rails of 40 mm dia stainless steel, 304 medium grade pipe with necessary fittings screwing for passenger/goods lifts including taking down old unserviceable hand rails complete all as specified and directed. Make of Steel:- Jindal Steel/ Tata Steel

Material and labour for aluminium chequered plate flooring Minimum 5 mm thick five bar pattern fixing with acssesories including necessary cutting bending, edeging, chamfering etc inside the car cabin of 08/13 passenger lifts etc complete all as specified and directed. Note :- Aluminium sheet should be cut in one piece for complete cabin ie. aluminium sheet should be jointless in complete cabin.

Material and labour for removal of dust, stains, marks, scratches on the stainless steel surface of car cabin including ceiling and carry out the scrubbing, polishing & buffing of stainless steel surface with help of stainless steel polish liquid and buffing tool to give the glossy and clean finish to lift cabins surfaces of 13 passenger lift complete all as specified and as directed.

Material and labour for painting on lift landing door/ car door mild steel surfaces including preparation of old steel surface of door and cabin girth and applying two coat of synthetic enamel paint (Ist grade quality) (approx 1.8 Sqm area per landing/ car door) by spray painting including making goods all distrubed surface of door of 13 passenger lift complete all as specified and as directed. (Make of paint:- ASIAN/ BERGER/ JENSON & NICHOLSON/ SHALIMAR)

Material and labour for painting of motor (capacity 4 KW to 12 KW) with gear assembly and supporting I-Section channels complete in machine room less (MRL) arrangement of lift installation with two coats of synthetic enamelled sky blue/ grey paint also where black paint is required as per direction of Engr-in-Charge and write the SM No on motor and panel with superior quality of synthetic enamelled white paint after scratching the old paint and preparing smooth surface suitable for painting complete all as specified and as directed. (Make of paint:- ASIAN/ BERGER/ JENSON & NICHOLSON/ SHALIMAR).

SECTION-II Taking down granite (of any type) any thickness complete all as specified and as directed.

Material and labour for 20 mm thick black or any other colour granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like, set and pointed in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

Demolition of cement concrete of any description and in any position not otherwise specifically provided for complete incl existing WPT all as specified and directed.

Material and labour for plain cement concrete (1:2:4) type B-1 using (20 mm graded crushed stone aggregate) as in levelling course/ roof padding, complete all as specified and directed.

Complete removal of existing water proofing treatment over RCC roof, lift shaft pits,projections of any thickness, any type by stripping out old tar felt over roofs, parapets, chimney stacks etc laid horizontally or vertically including taking out layer of cement plaster etc and cleaning the surface with wire brush including removing debris from the site and depositing in low lying area where directed and providing following :- (a) Rendering 10mm thick in CM 1:3 on concrete roof surfaces and finish the surface even and smooth without using extra cement including mixing of water proofing compound @ 2% by weight of cement. (b) Apply a coat of bituminous primer confirming to IS-3384@ 0.4 ltr/Sqm on newly plastered surface after curing as per IS-456 and dried. (c) After the primed surface has dried, apply a coat of hot blown bitumen(85/25 penetration) confirming to IS-702 @ 1.2 Kg/Sqm of the surface. (d) Provide polymeric water proofing membrane ISI marked laid with overlaps, bonded with hot blown bitumen, and laid by torch application method, end overlaps shall not be less than 150mm and side lap 75mm. Polymeric water proofing membrane should be five layered with centre core as 90 micron high molecular high density polyethylene film, min weight 3 Kg per sqm. APP membrane shall laid acorss the slop from lowest line of sloping roof towards ridge. (e) Over the APP membrane, apply a coat of semi hot blown 85/25 penetration grade bitumen confirming to IS-702 @ 1.20 Kg/ sqm and blinded with fine sand in dry condition @ 0.50 Kg / Sqm dusted over the bitumen coat Note :- (i) Care shall be taken to avoid wrinkle and air gaps while sticking membrane to the bitumen applied surface. (ii) Ponding test shall be conducted for 72 hrs as directed. (iii) PCC Levelling course and WPC shall be measured and paid seprately.

Supply only integral water proofing compound.

Tushar engineers

M/s Dhapola Elevator and Engineering

V S BUILDER

J D ENTERPRISES

MB Enterprises