SPECIAL REPAIR TO P-90 (ADM BLOCK) OF LANCERS (GH) AT JASAI MIL STN UNDER GE (A) BARAMER

Amount

Taking down cement plaster on stone masonry/Brick Masonry incl racking out joints, hacking for key scrubbing down with water and direction by Engr- In Charge.

M&L for 15 mm rendering in CM 1:6 on fair face of brick work or on concrete surface finished even and smooth without using extra cement complete all as specified and directed.

M&L for 05 mm rendering in CM 1:3 on fair face of ceiling or on concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.

M&L for 15 mm rendering in CM 1:4 on fair face of wall or on concrete surfaces finished even and fair with water profinfing compound (WPC) complete all as specified and directed.(WPC Measured seprately)

M &L for Preparation of new plastered surface of wall and applying two coat of oil emulsion distemper of approved tints over application of wall care putty average thickness of 1-2mm over a coat of interior wall primer complete all as specified and directed by Engineer-in-Charge..

M &L for Preparation of new plastered surface of Ceiling and applying two coat of oil emulsion distemper of approved tints over a coat of interior wall primer complete all as specified and directed by Engineer-in-Charge..

M&L preparation of new wall surfaces and applying Two or more coats of 100% Premium acrylic emulsion paint of required shade, , having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surface, at any location including necessary scaffolding arrangement as required at site complete all as specified and-as-directed.

M&L for complete removal of existing treatment incl preparation of wall surfaces and fill the crack of wall with crack filler paste and applying two coat of oil emulsion distemper of approved tints over a coat of interior wall primer, complete all as specified and directed by Engineer-in-Charge.

M&L 1-2mm thick wall care putty on External/Internal wall complete all as specified and-as-directed.

M&L for preparation of old plastered surface of Ceiling and fill the crack of wall with crack filler paste and applying one coat of oil emulsion distemper of approved tints complete all as specified and directed by Engineer-in-Charge..

M&L for preparation of wall surfaces and fill the crack of wall with crack filler paste and finishing walls with one coat of premium acrylic smooth exterior paint with silicone additives of reqd shade, coats applied @ 1.43 ltr /10Sqm including necessary scaffolding arrangement as required at site all as specified and directed.

Preparation of old decorated wooden surfaces of any description, not otherwise described over 10cm width & girth and applying one coat of synthetic enamel paint complete all as specified and directed by Engineer-in-Charge.

Dismantling of Wall panneling and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets, complete all as specified and directed

S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing, Complete all as specified and directed

S&F Solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet incluseive of solvent cement and fixing at site on PVC frame as per specifications and drawing, complete all as specified and directed

M&L 4 mm thick E-board Tile false ceiling with powder coated GI snap grid frame work complete all as specified and directed include all necessary drilling, cutting making good and necessary arrangement to fix electrical item as under:- (a) 25x25x1.5 mm thick GI Tee powder coated as main and cross runners suspended with 1.6mm dia GI wire suspenders with adjustable clamps and dash free fastners plugging in RCC slab placed @ 600mm centre to centre from perimeter wall. (b) 25x25x1.5 mm thick GI angle powder coated plugged @ 600mm center to center along perimeter of wall. (c) Fixing of 4mm thick E-Board tiles of size 595x595 mm of approved texture, and finished complete with two coats of oil emusion distemper on disturbed portion of ceiling/wall of approved Tint/ Colour shade over a coat of Primer, complete all as specified and as directed. NOTE: The complete ceiling work shall be done as per manufacturers instruction and as directed.

Dismantling boarding, of Aluminium / Ply / Wooden of any description, fixed in any position with screws. complete all as specified and directed

Taking down chowkat or frames with shutters (without taking off shutters from the frames) area not exc1.5 Sqm each and removing from site complete all as specified and directed.

Taking down chowkat or frames with shutters (without taking off shutters from the frames) area exc 1.50 sqm but n. exc 4 sqm complete all as specified and as directed.

Taking down shutters of any description exc 1 Sqm but not exc 2 Sqm each and complete all as specified and directed.

M&L powder coated aluminium, frame for ,doors, window, ventilators, partion and sliding shutters etc (minimum thickness of powder coating is 50 mixcron) with one or more rebates including jointing cleat, aluminium snap beading 20 x 15mm, rubber gasket, glazing clip for fixing etc .complete all as specified.

S&F anodised aluminium grill made out of 7mm x 4.5mm w'ide flat, square ractangular or similar section, fixed with channel of size 38mm x 12mm x 13mm (section 8778 complete all as specified including taking down (make: DECO GRILL No. DG 102 with aperture- 80mm or equipment as approved by GE.

S&F 4mm thick tinted sheet glass of approved make and shade/tint filling in aluminium panels door/window/partion with necessary joining cleats, beading all as specified and directed.

S&F in replacement stainless steel wire cloth of 0.36mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks or stainless steel wire staples or with wooden beads, stainless steel screws and nuts bolts etc for ventilator complete all as specified.

S & F 35mm thick glazed and skelton shutters of 2nd class hard wood (factory made) open rebated and divided to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass etc size of members of shutter as specified in SSR-91 Pt-I section 8 clause 8.20 (a) kiln seasoned and chemically pressure treated all as specifeid including stainless steel 304 grade wire cloth ( 0.36mm nominal dia of wire and average width of aperture 1.40 mm ) and incl supply and fixing following items:- (a) Stainless Steel (304 Grade) Finished Tower Bolt 200mm long - 2 nos per leaf (b) Stainless Steel (304 Grade) Finished Handles 200 mm - 2 nos per leaf (c) Stainless Steel (304 Grade) Finished Sliding Door Bolt/Aldrop 16x300mm - 1 nos per leaf (d) Stainless Steel (304 Grade) Finished Floor Door Stooper - 1 nos per leaf

S&F for mild steel ordinary rat tail rod pattern spring 300mm size including roller & roller plate and incl welding complete all as specified and as directed.

Supply and fixing 35mm thick, IInd class hard wood plain, framed, panelled factory made shutters with lock rail and panel of 12mm veneered particle board with commercial veneering on both faces or commercial ply. The size of rails and styles as per IS-1003 (Part-I) kiln seasoned and chemically pressure treated complete incl S & F fwg items As approved by Accepting Officer. (a) Stainless Steel (304 Grade) Finished Tower Bolt 200mm long - 2 Nos per leaf (b) Stainless Steel (304 Grade) Finished Handles 200 mm - 2 Nos per leaf (c) Stainless Steel (304 Grade) Finished Sliding Door Bolt/Aldrop 16 x 300mm-1 No per leaf (d) Stainless Steel (304 Grade) Finished Floor Door Stooper - 1 No per leaf

S&F in replacement 100mm size SS butt hinges and fixed to PVC frame /Wooden Frame and angle iron frame by necessary welding complete all as directed.

S & F in replacement s SS bow handle, bearing ISI mark, fabricated type extruded section of 150mm long complete all as specified and as directed.

S&F in replacement SS barrel tower bolts extruded section, 150mm size complete all as specified and directed

S & F in replacement s SS sliding door bolts of 300mm long with hasp and staple(bolt type) and fixing clips of sheets ,cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy, bearing ISI mark. complete all as specified and directed.

S&F in replacement s 140 mm floor door stopper of SS and tongue , anodised ,with hard drawn steel spring ,fixed in floor complete all as specified and directed

M&L for preparation of new wooden surfaces of any description, over 10cm in width or girth, not otherwise specified with two coats of synthetic enamel paint over one coat of pink primer complete all as specified and as directed.

S&F in replacement Plain (white) PVC Celuka Ply Board in Door, Shelves for Cup Boards or Kitchen Cabinets, one side laminated, one side plain 18/19mm thick as reqd, jointed by means of PVC adhesive Solvent and fixed using self tapping SS screws complete all as specified and directed.

S&F in replacement Plain (white) PVC Celuka Ply Board in Door, Shelves for Cup Boards or Kitchen Cabinets, both side plain 18/19mm thick as reqd, jointed by means of PVC adhesive Solvent and fixed using self tapping SS screws complete all as specified and directed.

S & F in replacement s SS sliding door bolts of 150 mm long with hasp and staple(bolt type) and fixing clips of sheets ,cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy, bearing ISI mark. complete all as specified and directed.

S&F magnetic door catcher medium grade to hold approx 1000 mm opening cabinet door and fixed-in-replacement s complete all as specified and directed.

S & F for Rotational moulded polyethylene water storage tanks of 1000 Litres capacity, (cylindrical vertical tanks with closed top) hoisted and fixed in position including making necessary arrangements for fixing inlet, outlet and over flow pipe and provision of wash out pipe etc including taking down existing tank complete .

S&F in replacement Stainless steel tubing of 20 mm dia chromium plated min. 1.0 mm wall thickness as in curtain rod complete incl S&F 02 Nos stainless steel brackets & finials fency type, stops fixed with ss screws etc all as specified & directed. Note : For the purpose of mesurement and payment running length of curtain rod only shall be considered as approved by accepting officer.

Supply & Fixing in replacement 15mm bore tubes medium grade galvanized with all fittings such as Tee, elbows, sockets, unions, plugs, short lenghts etc. and fixed complete to walls and ceilings or laid in floors concealed or open of any length including taking down or up existing GI tubing & connections all as specified and directed by Engr-in-charge.

Supply & Fixing in replacement 20 mm bore tubes medium grade galvanized with all fitting such as Tee, elbows, sockets, unions, plugs, short lenghts etc and fixed complete to walls and ceilings or laid in floors of any length including taking down or up existing GI tubing & connections all as specified and directed by Engr-in-charge.

S&F in replacement 15 mm dia bib tap,fancy type chromium plated cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed all as specified anddirected.

S&F in replacement 15mm bore CP fancy type stop valves/angle cock, cast copper alloy, screwed both ends for iron pipe or for union complete all as specified and as directed.

S&F in replacement Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect complete all as specified and as directed.

S&F in replacement s 15mm dia Bib tap (2 in 1 type) of brass, chromium plated fancy type glossy finish fixed in replacement s complete all as specified and directed.

S & F in replacement Vitreous china premium/1st quality urinal half stall type, white colour, of size 465x355x265 mm incl providing and fixing plugs/brackets, bedding urinal against wall in CM 1:2, securing urinals to plugs with and incl S&F of all accessories for fixing as recommended by manufacturer like 60mm long brass secrews/fasteners/rag bolts etc, pointing urinal back in white cement; connecting for discharge pipe incl necessary packing, union complete all as specified.

S&F in replacement Urinal spreader of PTMT any colour for fixing with 15mm dia pipe. (Minimum weight 60gms).

S & F in replacement Vitreous china premium/1st quality wash basin, white, size 550x400 mm including S&F all accessories as recommended by manufacturer complete fixed in position in all respect as per manufacturer's instructions and all as specified including all Waste fittings, brass,chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed,

S&f in replacement 15mm bore pillar tap cast copper alloy fancy type with capston heads, chromium plated screwed down high pressure, with or without letters Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipes and fixed all as specified and directed.

S & F in replacement Flushing cistern of PVC 10 ltr. cap. with dual flushing system, valveless syphonic action type, , low level, white/ivory/off white with inlet, ball valve, float and including brackets and connection to pipe etc. and incl all necessary accessories like rag bolts/gel gasket etc as recommended by manufacturer for fixing, packing and taking down existing of any description/size complete in all respect all as specified.

S&F in replacement vitreous china wash down water closet pan pedestal pattern white including connection in drain and in flushing pipe complete including 'P' or 'S' trap and including plastic water closet seat cover with flat bottom and cover with MS Chromium plated hinge divice ISI marked complete all as specified and directed .

Taking down old vitreous china EWC and cistern and S&F vitreous china EWC one piece Single Piece WC with PP Soft Close Slim Seat Cover, Hinges, Dual Flush Cistern Fittings, Fixing Accessories And Accessories Set, Size: 360x660x755 mm, S Trap- 220 mm all as specified and directed.

S&F in replacement sinks made of stainless steel 1 mm thick kitchen or laboratory with plug , washer and wastes , including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe , overall size 495mmx420mm bowl size 410mmx330mmx160mm complete all as specified.

S&F in replacement PVC connection 15mm bore length not less than 600 mm long with both ends PTMT nuts complete all as specified.

S&F in replacement s Stainless steel gratings 100mm bore size fixed with cement motar.

S&F in replacement s chromium plated swivel shower roses with or without swivel joints, for fixing with 15mm pipe fixed all as specified

S&F in replacement Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed

S&F in replacement s tubular towel rail, brass cromium plated, 20mm dia, D type, 60cm long between flanges complete all as specified and directed Engrs-In Charge.

Dismantling floor, hearth or wall tiling including cement mortar bedding, removing serviceable tiles to stores and removing debris outside the MD land.

S&F Vitrified ceramic tiles in light shade 10mm thick (square/ractangular) polished,area of each tiles exc 0.18 sqm but not exc 0.36 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in CM 1:4, complete all as specified and directed

All as item No. 61.00 here-in-above but as in skirting over cement mortar backing plaster in CM1:4 15mm thick

M&L for 300mmx300mmx10mm thick non skid polka dots parking floor paver tiles with grey cement and pigment, over and including 15mm thick screed in CM (1:4), set jointed & pointed in neat cement slurry in floors complete all as specified and directed.

Dismantling of Stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in any mortar. Note : Work will be in patches or in bulk

M & L for Granite of black / green / imperial red (colour as approved by Accepting Officer) of any type machine cut as in shelves/steps/counter tops, 20 mm thick, set and jointed in cement slurry over & including screed of 15 mm thick / rendering in cement mortar (1:4) and pointed in cement mixed with pigment to match the shade of slab or with suitable adhesive for fixing on unpolished kota stone slabs and including rubbing, cutting and mirror type polishing and bull nose on exposed sides complete all as specified . Note : Single piece should be used in steps/cills/jambs/shelves or equivalent as approved by accepting officer .

Demolition of cement Concrete is ground floors andy pavings n exc 15 cm thickness (below or above ground level), complete all as specified and directed

M&L for 25mm thk PCC 1:2:4 type B0 using 12.5mm graded stone aggregate as in subbase of floors & finishing the surface even & smooth without using extra cement.

M&L 100mm thick cement concrete type D-2, 1:4:8 (40mm graded crushed stone aggregate) finishing cement concrete surface even and smooth without using extra cement as specified and directed.

M&L for 75mm thick plain cement concrete 1:3:6 type C2 (using 40mm graded stone aggregate) as in plinth protection finished even and smooth without using extra cement, including making joints to the full depth of PCC at every 3 metres and at every change of direction and filling the same with & including bitumen and sand 1:2 by weight complete all as specified and as directed.

Demolition of cement concrete ( unreinforced) in roofs , floors (other than ground floors) beams, staircases,landing, chajjas and similar suspended work

M&L plain cement concrete 1:2:4 type B1 using 12.5 mm graded aggregate as in roof for maint. the uniform slope etc any thickness at any height and in any position all as specified and directed by engr-in-charge at site.

M&L Applying evenly a coat of bituminous primer confirming to IS 3384 - 1986 @ 0.40 Kg/Sqm

M&L APP based polymeric membrane minimum weight 3 Kg/Sqm and minimum 3 mm thick reinforced with polyster non wove fabric (wt not less than 150 gms/sqm) land on primed surface by forced application complete all as specified

S&F for 10mm thick Endura SRI cool roof, UV Rays resistant anti skid tiles of size exceeding 0.06Sqm but not exceeding 0.11 Sqm on terraace/roof surface over 15mm thick screed bed in CM 1:4 set and jointed grouted and flush pointed with epoxy based waterproof tile filler to match the colour of tiles and all as specified and directed

Supply only liquid water proofing compound ( For external new plaster surfaces)

Demolition of stone / boulder masonry walling built in cement mortar including all quoins arches pillars etc and removal unserviceable materials, debris, rubbish to out side MD land complete all as specified and as directed.

M&L for precast-cement concrete block masonary with solid blocks type C-1 ,1:3:6 (20mm graded aggregates) exc 10 cm in width and setting in CM 1:4 ,complete all as specified and directed

Dismantling of plain or corrugated steel sheets in roof coverings any type complete all as specified & directed by Engineer in charge.

S&F Pre- painted galvaiume aluminum zinc coating GI based corrugated steel sheet 0.5 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping crews as specified complete all as specified and directed

S&F for hollow,rolled sections as in main and cross beams, column, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates conf to Fe-410-w or E -250 quality A complete all as specified and directed.

M&L for applying two coats of synthetic enamel paint over a coat of red oxide primer on steel surfaces including prepration of new steel surfaces of any description over 10cm girth or width complete all as specified and as directed.

Dismantling structural steel work including doors gates but excluding framed truss etc complete all as specified and directed

Taking down old, unsv aluminium/copper point wiring (light, fan, socket or power) complete, incl fixture & fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc. removing materials to store for keeping in safe custody or for taking credit & making good the disturbed surfaces of walls, floors, etc. including Cost of making good the disturbed surfaces is deemed to be included in the unit quote rates, complete all as specified and directed by Engr-in-Charge.

Taking down old sub-main wiring incl fixture & fittings etc. removing materials to store for keeping in safe custody or for taking credit & making good the disturbed surfaces of walls, floors, etc., v complete all as specified and directed by Engr-in-Charge.

Disconnecting/dismantling of old existing un serviceable DB's along with metal enclosue concealed in walls of any type/way 240/415 Volts with their old/un serviceable burnt MCCB/MCB's etc.incl making good the disturbed surfaces and matching with existing surfces, including Cost of making good the disturbed surfaces is deemed to be included in the unit quote rates, complete all as specified and directed by Engr-in-Charge.

M & L for concealed point wiring with two single core 1.5 sqmm PVC insulated, unsheathed, FRLS cable, 1100 volts grade, ISI marked with multi stranded copper conductor drawn through and including non-metallic PVC rigid conduit (medium grade) with all fittings and accessories ISI marked incl provision of 1.5 sqmm PVC insulated, multistranded, unsheathed, copper conductor cable, FRLS, ISI marked as earth continuity conductor (green in colour) & incl fixing of modular metal flush boxes of appropriate size & thickness fixed flush to wall for mounting switch, sockets etc. with including cutting chases for conduits & sinkings for modular boxes & making good the disturbed surfaces, matching to the existing one etc., suitable for One Light/fan/Call Bell etc. point controlled by one switch 5/6 Amps, complete all as specified & as directed NOTE : 1) Modular metal flush boxes shall be measured & paid separately. 2) Cutting chases & making good the disturbed surfaces is deemed to be included in the unit quoted rates. 3)-The make/model of modular metal flush boxes & modular cover plates shall be same as that of modular switches & sockets.

All as item No. 86.00 here-in-above but suitable for One switch socket outlet point 5/6 Amps on Same board.

All as item No. 86.00 here-in-above but suitable for One switch socket outlet point 5/6 Amps on independent board.

All as item No. 86.00 here-in-above but suitable for with FRLS PVC insulated copper conductor cable of size 2.5 Sqmm and 2.5 Sqmm for earth continuity conductor green in colour for 16A switch socket complete.

M & L for concealed sub-main wiring alongwith earth wire of size (2 x 4.00) sq. mm + (1 x 4.00) sq. mm earth wire, ISI marked, FRLS, PVC insulated, multi stranded, copper conductor, single core cable drawn through and including non-metallic PVC conduit (medium grade) with all fittings and accessories ISI marked for conduits & sinkings for modular boxes & making good to walls, floors,ceiling etc. complete all as specified & as directed.

M & L for concealed sub-main wiring alongwith earth wire of size (2 x 6.00) sq. mm + (1 x 6.00) sq. mm earth wire, ISI marked, FRLS, PVC insulated, multi stranded, copper conductor, single core cable drawn through and including non-metallic PVC conduit (medium grade) with all fittings and accessories ISI marked for conduits & sinkings for modular boxes & making good to walls, floors,ceiling etc. complete all as specified & as directed. .NOTE for item No. 6 & 7 : 1) Two runs of PVC wire, one run of earth wire & one run of PVC rigid conduit (medium grade) will be measured as one length. 2) Modular metal flush boxes (if req) shall be measured & paid separately.2) Cutting chases & making good, including necessary Putty work of the disturbed surfaces is deemed to be included in the unit quoted rates.

M & L for concealed sub-main wiring alongwith earth wire of size (4 x 6.00) sq. mm + (1 x 6.00) sq. mm earth wire, ISI marked, FRLS, PVC insulated, multi stranded, copper conductor, single core cable drawn through and including non-metallic PVC conduit (medium grade) with all fittings and accessories ISI marked for conduits & sinkings for modular boxes & making good to walls, floors,ceiling etc. complete all as specified & as directed. .NOTE : 1) Four runs of PVC wire, one run of earth wire & one run of PVC rigid conduit (medium grade) will be measured as one length. 2) Modular metal flush boxes (if req) shall be measured & paid separately.2) Cutting chases & making good, including necessary Putty work of the disturbed surfaces is deemed to be included in the unit quoted rates.

S & F Modular switch, one way, 6 Amp, 1 Module, 240 volt complete all as specified and as directed.

S & F Modular switch with indicator, one way, 16 Amp, 1 Module, 240 volt complete all as specified and as directed.

S & F Modular shuttered socket outlet 3 Pin, 6 Amp, 2 Module, 240 volts, ISI marked complete all as specified and as directed.

S & F Modular shuttered socket outlet 3 Pin, 6/16 Amp, 2 Module, 240 volts, ISI marked complete all as specified and as directed.

Supply & Fixing and concealing modular metal flush box suitable for fixing switches/sockets of 1/2 modules all as directed.

Supply & Fixing and concealing modular metal flush box suitable for fixing switches/sockets of 3 modules all as directed.

Supply & Fixing and concealing modular metal flush box suitable for fixing switches/sockets of 6 modules all as directed.

Supply & Fixing and concealing modular metal flush box suitable for fixing switches/sockets of 8 modules all as directed.

Supply & Fixing and concealing modular metal flush box suitable for fixing switches/sockets of 12 modules all as directed.

Supply & Fixing modular cover plate suitable for fixing switches/sockets of 1/2 modules all as directed.

Supply & Fixing modular cover plate suitable for fixing switches/sockets of 3 modules all as directed.

Supply & Fixing modular cover plate suitable for fixing switches/sockets of 6 modules all as directed.

Supply & Fixing modular cover plate suitable for fixing switches/sockets of 8 modules all as directed.

Supply & Fixing modular cover plate suitable for fixing switches/sockets of 12 modules all as directed.

S&F ceiling rose surface PVC/ Polycarbonate, Isolated body with face Bakelite three terminal complete all as specified and directed. Make: Havells/CG/Anchor

S&F IP>=20, Class I Wall mounted 4 feet LED batten with integrated electronic driver & Aluminium body complete with all accessories, prewired, including 20 W with min 120 lumens/Watt output,6500 K, LED 4 feet tube light and connecting of flexible wire twin core from ceiling rose to fitting through & including flexible conduit from ceiling rose to fitting complete incl taking down old/unsv fittings all as specified and directed by Engr-in-Charge.

S&F LED Luminaire 600mmX600mm 36Watts, 230V AC Recessed type with High Efficiency PMMA Diffuser soft glare free light complete with drivers, holders & LED Lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size incl taking down old unserviceable ftg complete all as specified and as directed by Engr-in-charge.

S&F Surface mounted Round Warm white LED down light of 7 Watts having suprior long lasting metal body, in built surge protection of upto 4KV with high power LED as source which provides soft-light and glare free symmetrical distribution all as specified and directed by the Engr-in- Charge incl taking down old unserviceable ftg.

S&F recess mounted Round Ceiling Mounted Warm white ultra slim LED panel light of 6 Watts having suprior long lasting metal body, in built surge protection of upto 4KV suitable for fixing in gypsum/ armstrong false ceiling with high power LED as source which provides soft-light and glare free symmetrical distribution all as specified and directed by the Engr-in- Charge incl taking down old unserviceable ftg. Note: The cost of cutting and making good to the Ceiling and matching to the existing surface is deemed to be included in the unit quoted rates.

S&F recess mounted Square Ceiling Mounted Warm white ultra slim LED panel light of 6 Watts having suprior long lasting metal body, in built surge protection of upto 4KV suitable for fixing in gypsum/ armstrong false ceiling with high power LED as source which provides soft-light and glare free symmetrical distribution all as specified and directed by the Engr-in- Charge incl taking down old unserviceable ftg.Note: The cost of cutting and making good to the Ceiling and matching to the existing surface is deemed to be included in the unit quoted rates.

S&F recess mounted Square Ceiling Mounted Warm white ultra slim LED panel light of 9 Watts having suprior long lasting metal body, in built surge protection of upto 4KV suitable for fixing in gypsum/ armstrong false ceiling with high power LED as source which provides soft-light and glare free symmetrical distribution all as specified and directed by the Engr-in- Charge incl taking down old unserviceable ftg.Note: The cost of cutting and making good to the Ceiling and matching to the existing surface is deemed to be included in the unit quoted rates.

S&F recess mounted Square Ceiling Mounted Warm white ultra slim LED panel light of 18 Watts having suprior long lasting metal body, in built surge protection of upto 4KV suitable for fixing in gypsum/ armstrong false ceiling with high power LED as source which provides soft-light and glare free symmetrical distribution all as specified and directed by the Engr-in- Charge incl taking down old unserviceable ftg.Note: The cost of cutting and making good to the Ceiling and matching to the existing surface is deemed to be included in the unit quoted rates.

S&F IP >= 65,IK>=07, Class I Environment friendly, energy saving, surface mounted, decorative bulk head edge lit LED luminaire 10W with min 120 lumens/watt output made of pressure die cast aluminium housing with suitable fixing arrangement complete with all accessories internally prewired and including connecting up with and including twin core twisted flexible copper conductor cable of suitable size complete incl taking down old/unsv fittings all as specified and directed by Engr-in-Charge.

S&F IP >= 65, IK>=07, Class I energy saving and environment friendly long life high power LED as source of building security light of 30W with min 110 Lumens/Watts, made up of pressure die cast aluminum housing with acrylic cover as diffuser with including GI pipe bracket made out of 40mm dia light grade pipe of length 1.2 Mtrs, bend to shape 120-130 degree and MS clamps made out of 25x3mm flat iron 2 Nos including nut and bolts for fixing the bracket and making connections through & including flexible conduit from ceiling rose to fitting complete incl taking down old/unsv fittings all as specified and directed by Engr-in-Charge.

Supply, install, testing & commissioning of Exhaust fan, metal body with automatic back shutter louvers 300 mm sweep, 1400 RPM or more, Air Delivery not less than 1850 CMH, single phase, 240 Volts, AC, 50 Hz and connecting up complete including louvers and provision of cable 3/2 core of suitable size from ceiling rose to fan in flexible hose and making of suitable sized hole in the wall/existing window/ventillator etc. for fixing of the exhaust fan & making good the disturbed surfaces (if any) complete all as specified & as directed. Note :- (i) The cost of making hole in walls/other surfaces & making good the disturbed surfaces incl any framework/cement work/wood work/welding work etc. required for proper fixing of the exhaust fan & matching to the existing surface is deemed to be included in the unit quoted rates.

Supply and Fixing ceiling fans complete with blades, down rods of suitable lengh upto Ceiling/false ceiling level, with fan regulator 2M and accessories, 230 V, 1200mm sweep, min air delivery 210 CFM with service value 6.00 BEE Five star rating with Brushless direct current rating (BLDC) including connecting up with and including twin/three core twisted flexible copper conductor cable of suitable size complete all as specified and directed by the Engr-in-Charge incl taking down old/unsv fan. Note : (i) Installed Ceiling fan's warranty card should be submitted to the Engr-in-Charge. (ii)The cost of making good the disturbed surfaces and matching to the existing/original surface is deemed to be included in the unit quoted rates (iii)The cost of taking down old unserviable Ceiling fan's and tranportation of old Ceiling fan's to be submitted to MES Store yard is deemed to be included in the quoted rate.

S & Fand concealing SPN DB, 12 Way, IP43, IK09, Metal double door type 240 volts fitted with busbar and blanking plates, neutral link and making good the disturbed surfaces with all other accessories including necessary connection all as specified and directed by Engr-in-Charge.

S & F and concealing SPN DB, 08 Way, IP43, IK09, Metal double door type 240 volts fitted with busbar and blanking plates, neutral link and making good the disturbed surfaces with all other accessories including necessary connection all as specified and directed by Engr-in-Charge.

S & F and concealing TPN DB, 04 Way,4 Pole as incomer, IP43, IK09, Metal double door type 415 volts fitted with busbar and blanking plates, neutral link and making good the disturbed surfaces with all other accessories including necessary connection all as specified and directed by Engr-in-Charge.

S & F and concealing MCCB DB, 04 Way, MCCB as incomer, IP43, IK09, Metal double door type 415 volts fitted with busbar and blanking plates, neutral link and making good the disturbed surfaces with all other accessories including necessary connection all as specified and directed by Engr-in-Charge.

S & F and concealing Enclosure 6-way suitable for mounting MCB/Isolator/RCBO with powder coated with all other accessories including necessary connection all as specified and directed by Engr-in-Charge.

S&F MCCB,4 Pole (Ics = 100% Icu) with thermal magnetic release, adjustable short circuit & adjustable overload setting, suitable for isolation, having breaking capacity 25 KA & of rating 63 Amps all as specified and dircted by Engr-in-Charge.

S&F Changeover switch four pole 63 Amps in three position (I-O-II) with centre off position all as specified and dircted by Engr-in-Charge.

S&F Miniature circuit Breakers, SPN,C-Series 240 Volts of capacity 6-32 Amps with breaking capacity 10 KA all as specified and dircted by Engr-in-Charge.

S&F Miniature circuit Breakers, SPN,C-Series 240 Volts of capacity 40 Amps with breaking capacity 10 KA all as specified and dircted by Engr-in-Charge.

S&F Miniature circuit Breakers, single pole,C-Series 240 Volts of capacity (6-32 Amps) as ordered with breaking capacity 10 KA all as specified and dircted by Engr-in-Charge.

S&F Miniature circuit Breakers, single pole,C-Series 240 Volts of capacity 40 Amps as ordered with breaking capacity 10 KA all as specified and dircted by Engr-in-Charge.

S&F Miniature circuit Breakers, TPN,C-Series 415 Volts of capacity 63 Amps with breaking capacity 15 KA all as specified and dircted by Engr-in-Charge.

S&F Miniature circuit Breakers, TP, C-Series 415 Volts of capacity 63 Amps with breaking capacity 15 KA all as specified and dircted by Engr-in-Charge.

Supply, laying, jointing & testing XLPE insulated screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 70 sq mm 3.5 core in trenches / through GI pipe / fixed along with pole structure etc with all fixing & connecting accessories like Lugs, Gland etc incl taking down old existing Cable of any size/type complete all as specified & as directed.

Description all as per Item Sl No 48 here in above but of size 120 Sqmm 3.5 core.

Supply and laying light grade GI Pipe (ISI Marked) of 40mm dia for cable protection to be fixed on wall/in trenches with necessary clamps or in road crossing,complete all as directed(Rate qouted shall include MS clamps of required size wherever pipes are to be fixed on walls/other surfaces).

Supply and laying High density Poly-Ethylene Pipes(HDPE) of pressure rating 6Kgf/cm2 (ISI Marked) of 40mm dia for cable protection to be fixed on wall/in trenches/Ground with necessary clamps or in road crossing,complete all as directed(Rate qouted shall include MS clamps of required size wherever pipes are to be fixed on walls/other surfaces).

Excavation in trenches n.exc 1.5m wide and n.exc 1.5m in depth for taking out/laying of UG Cables, GI Pipe etc. and getting out in Soft/Loose soil complete.

Returning, filling in including spreading, levelling, watering and well ramming in layers n.exc 25cm thick.

Removing of excavated material n.exc 50m and depositing where directed at a level n.exc 1.5m above the starting point.

Supply and spreading Tibba Sand including watering and consolidation in trenches for cushioning/cable protection all as specified and directed by Engr-in-Charge. Note : Punned thickness shall be measured and paid

Supply and laying un-reinforced precast concrete cable cover, class LV, type 1, flat size 250 mm x 150 mm x 40 mm and abutting each other with gap between adjacent precast concrete cable cover not exceeding 10 mm over underground cables in trenches for cable protection of U/G cables with width equal to length of bricks complete all as specified and directed

M & L for cutting the existing hard standing /PCC /WBM road at a depth not less than 45 cm and 25 cm in width for passing of cable through GI pipe, returning filling in, complete including finishing the surfaces by providing top not less than 25 cm thick cement concrete type C-1 (1:3:6) using 20 mm grade aggregate, bottom filled with excavated earth and finishing to a uniform smooth surface complete all as specified and directed.

Supply, install, testing & commissioning of LT busbar junction box "out-door type" of size 600 mm (height) x 600 mm (breadth) x 300 mm (depth) (minimum dimensions), factory fabricated CPRI approved (type-tested) with suitable neoprene rubber gasket to make it completely dust & vermin proof & degree of protection not less than IP-55 & general construction confirming to IS-13947, double door, front & back openable. The box shall be provided with ventilation facility in the form of louvers for better heat dissipation & high grade Copper bus-bar of Size 300mm x 70mm x 6mm , min spacing of 75mm between the busbars & wrapped with coloured PVC tape /sleeves of rating in conformity to the Incoming cable rating. The panel board shall be fabricated out of 3.15 mm thick (for outer portions) & 2.00 mm thick (for inner portions) CRCA sheet duly pre-treated & powder coated, supporting angle iron frame & MC channel base suitable for 3 Phase, 4 wire system 415 /440 volts grade including I/C & O/G cable opening on bottom & at both sides including cable glands of suitable sizes with suitable PCC (1:3:6) type C-2 foundation , necessary earthwork (if any) incl Incoming MCCB of 63 Amps in seprate portion complete all as specified & as directed.

Supply, install, testing & commissioning of LT control panel board "out-door type" of size 1200 mm (height) x 1200 mm (breadth) x 350 mm (depth) (minimum dimensions), factory fabricated CPRI approved (type-tested) with suitable neoprene rubber gasket to make it completely dust & vermin proof & degree of protection not less than IP-55 & general construction confirming to IS-13947, double door, front & back openable. The panel shall be provided with ventilation facility in the form of louvers for better heat dissipation & high grade Copper bus-bar wrapped with coloured PVC tape /sleeves of rating in conformity to the Incoming ACB/MCCB rating. The panel board shall be fabricated out of 3.15 mm thick (for outer portions) & 2.00 mm thick (for inner portions) CRCA sheet duly pre-treated & powder coated, supporting angle iron frame & MC channel base suitable for 3 Phase, 4 wire system 415 /440 volts grade including complete internal wiring with not less than 2.5 Sqmm copper wire including cable glands and lugs of suitable sizes with suitable PCC (1:3:6) type C-2 foundation , necessary earthwork (if any) complete all as specified & as directed with & including the following accessories :

(i) BUS-BAR & INTERNAL CONNECTIONS : The bus-bars shall be made up of 04 Nos high grade Copper with rating should be suitable as per incoming Breaker, duly insulated with 1100 Volts grade standard colour coded PVC sleeves & rigidly mounted on suitable sized "F" class insulators of non-hygroscopic, non-combustible, all internal connections from main bus-bars to switch gears etc. PROVISION FOR CABLE ENTRY : The provision for cable entry /exit shall be provided in the bottom for both incoming & out-going cables with the help of glands matching the existing LT cable sizes. INCOMING : (a) MCCB 4 Pole (Ics = 100% Icu) with thermal magnetic release, adjustable short circuit & adjustable overload setting, suitable for isolation, having breaking capacity 25 KA & of rating 160-200 Amps - 01 .

OUTGOINGS : (a) MCCB 4 Pole (Ics = 100% Icu) with thermal magnetic release, adjustable short circuit & adjustable overload setting, suitable for isolation, having breaking capacity 25 KA & of rating 80 to 100 A - 01 No. (b) MCCB 4 Pole (Ics = 100% Icu) with thermal magnetic release, adjustable short circuit & adjustable overload setting, suitable for isolation, having breaking capacity 25 KA & of rating 63 to 80 A - 03 Nos. (c) Time switch 415 Volts, 3 Phase of 20 Amps rating with Contactor complete . (d) MCB TPN "C" series having breaking capacity 10 KA of rating 06 to 32 Amps - 01 No. (e) MCB TPN "C" series having breaking capacity 10 KA of rating 40 to 63 Amps - 02 No.

S.K. INFRASTRUCTURE (BID ID -3510949)

SIGMA CONSTRUCTION COMPANY (BID ID -3516804)

M/S TANUSHREE CONSTRUCTION COMPANY (BID ID -3514599)

National Rewinding Works (BID ID -3509613)

Parth Construction Company (BID ID -3508646)

M/s RAAJSHREE INFRA (BID ID -3510171)

M/S IQRA CONSTRUCTION (BID ID -3516799)

M/s Tomar Builders (BID ID -3509748)