Development of Study Centre at Dr.Thangaraj Salai in Ward 31 , Zone 2

Earth work excavation for foundation in Hard stiff clay, stiff black cotton, hard red earth, shales murram, gravel, stoney earth and earth mixed with small size boulders SS.20B and Sand, silt or other loose soil, wet sand, silt not under water, light black cotton soil, sandy loam ordinary soil and to full depth as may be directed except in hardrock requiring blasting inclusive of shoring shuttering and baling out water wherever necessary refilling the sides of foundation with excavated soil other than sand in layers of 15cm thick well rammed and completed, cleaning and levelling the site etc.,complete - Narrow Foundations - Upto 2.00m Depth

Earth work excavation for foundation in Hard stiff clay, stiff black cotton, hard red earth, shales murram, gravel, stoney earth and earth mixed with small size boulders SS.20B and Sand, silt or other loose soil, wet sand, silt not under water, light black cotton soil, sandy loam ordinary soil and to full depth as may be directed except in hardrock requiring blasting inclusive of shoring shuttering and baling out water wherever necessary refilling the sides of foundation with excavated soil other than sand in layers of 15cm thick well rammed and completed, cleaning and levelling the site etc.,complete - Open Earth Work excavation

Supplying and filling in foundation and basement with Crushed Stone Sand (M- Sand) in layers of not more than 15cm thick well rammed watered and compacted etc., complete complying with standard specification.

Plain Cement Concrete 1:4:8 (one part of cement, four part of Crushed Stone Sand (M- Sand) and eight part of coarse aggregates) using 40mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges and all incidential charges such as water providing etc., complete as per standard specification

Supplying and erecting steel centering including necessary supports for plane surfaces for Reinforced Cement Concrete works such as column footings, column pedestals, plinth beams, grade beams, staircase steps, etc. which require only nominal strutting using mild steel sheets of size 90cm x 60cm and 10 BG stiffened with welded mild steel angles of size 25mm x 25mm x 3 mm for boarding, laid over silver oak joists of size 10cm x 6.5cm spaced at about 75cm centre to centre or at suitable intervals etc. complete in all floors complying with standard specifcation - Plinth Beam

Centering for soffits of RCC slabs of plane surface like lintels, beams ,etc.,including strutting 3m high using mild steel sheets of size 90cm X 60cm X and B.G 10 stiffened with M.S angles of size 25mm X 25mm X 3mm laid over silver Oak (C.W) joists of size 10cm X 6.5cm (spaced at about 90cm c/c )and supported dy casurina props of 10cm to 13cm dia (spaced of 75cm C/C) complying with standard specification and directed - For plane surfaces such as rectangular or square RCC columns, sunshades, top and bottom slab of RCC boxing, etc.

Supplying and erecting centering for sides and soffits including necessary supports and strutting upto 3.29 M height for plane surfaces as detailed below in all floors with all cross bracings using Mild Steel sheets of size 90 x 60 cm and 10 BG stiffened with welded Mild Steel angle of size 25mm x 25mm x 3 mm for boarding laid over silver oak joists of size 10cm x 6.50 cm spaced at abote 90 cm centre to centre and supported by casurina props of 10cm to 13cm dia spaced at not more than 75cm centre to centre etc. complete complying with the standard specificaiton. - For plane surfaces such as RCC floor slab, roof slab, beams, lintels, bed blocks, landing slab, waist slab, portico slabs and beams, etc.

Providing and laying in position Standardised Concrete Mix M-20 Grade in accordance with IS 456 - 2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement contenet of 325Kg/ cum and maximum water cement ratio of 0.55 including admixture (Plasticiser / super plasticiser) in recommended proportions as per IS 9103 to accelerate, related setting of concrete, improve workability without imparing strength and durability with about (5.0cum), 7730Kg of 20mm machine crushed stone jelly and with about (3.3 cum), 5156kg of 10 - 12mm machine crushed stone jelly and with about (4.79cum) 7670 kg of Crushed Stone Sand (M- Sand), but excluding cost of reinforcement grill and fabricating charges centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary without claiming extra cost etc., complete complying with standard specification and as directed by the departmental officers - The Coarse and Fine aggregates to be used should comply with the requirements of IS standards. - Upto Basement

Providing and laying in position Standardised Concrete Mix M-20 Grade in accordance with IS 456 - 2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement contenet of 325Kg/ cum and maximum water cement ratio of 0.55 including admixture (Plasticiser / super plasticiser) in recommended proportions as per IS 9103 to accelerate, related setting of concrete, improve workability without imparing strength and durability with about (5.0cum), 7730Kg of 20mm machine crushed stone jelly and with about (3.3 cum), 5156kg of 10 - 12mm machine crushed stone jelly and with about (4.79cum) 7670 kg of Crushed Stone Sand (M- Sand), but excluding cost of reinforcement grill and fabricating charges centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary without claiming extra cost etc., complete complying with standard specification and as directed by the departmental officers - The Coarse and Fine aggregates to be used should comply with the requirements of IS standards. - Ground Floor

Suppling and fabricating and placing in position MS (or) R.T.S. bar for reinforcement to all RCC works as per the design given including cost of steel and binding wire also in all floors as per standard specification.

Brick work in CM 1:5 (one cement & Five Crushed Stone Sand (M- Sand)) using II class ground moulded bricks of size 9"X43/8"X 23/4" standard specification including finishing, curing, etc., complete complying with standard specification (Masonry projections wherever necessary for obtaining required elevation shall be done without extra cost) - Upto Basement

Brick work in CM 1:5 (one cement & Five Crushed Stone Sand (M- Sand)) using II class ground moulded bricks of size 9"X43/8"X 23/4" standard specification including finishing, curing, etc., complete complying with standard specification (Masonry projections wherever necessary for obtaining required elevation shall be done without extra cost) - Ground Floor

Brick Partition walls in CM 1:3 (one cement & three Crushed Stone Sand (M- Sand)) using II class ground moulded bricks of size 9"X43/8"X23/4" using hoop iron reinforcement 2 Nos of 6mm dia M.S.rod at every three alternate layers and the cost shall inclusive of iron reinforcement, Brick work etc, complete as per standard specification - Ground Floor

Fabricating Supply and fixing and position of MS doors with single leave. The door outer frame will be 40x40x6mm MS angle, the shutter frame will be 35x35x6 mm, MS angle intermediate stiffner will be 35x35x6 mm with cross stiffner 25x 25x5 mm flats covered with 18 gauge M.S. sheet with necessary hinges, tower bolts, aldrop length 30mm and hold fast etc., complete with one coat red oxideprimer. - Size 1.20 X 2.10m

Providing UPVC (Un-Plasticized Polyvinyl Chloride) Door: Providing and fixing casement doors fabricated from unplasticized polyvinyl chloride (uPVC) sections. Profiles: The profiles should be three chamber system which provides high insulation properties with outer frame 60mm x 55mm with an outer wall thickness of 2.4mm. The window unit should be designed with all corner joints mitred and fusion welded. Windows should be steel reinforced with 25 x 24 x 25mm steel reinforcement with a thickness of 1mm to have dimensional stability. The sash should be of 60 x 102mm. The mullion should be of 60 x 74mm. The profiles should have co-extruded seals. Hardware: All the hardware like friction stays, handles should be screwed with self tapping screws. The handles, locks should be designed so that they cannot be released from outside. Glazing: The window system should be glazed with 5mm plain float glass / 6mm bison lam Installation: The profiles should be cut to length and welded 45 sqm 8313.00 degrees. The window should be designed such that the water drainage does not pass through the reinforcement chamber. The window system should be fixed directly to the plastered brick wall using self expanding nylon plug and driving ms electroplated screws into plug

UPVC Ventilator Specification: Supplying and fixing UPVC (Un- Plasticized Polyvinyl Chloride) Lotivered Ventilators oJ from the profile the size of outer frame 60mm x 58mm and shutter profile size of 60 x 78mm both profiles ore reinforced with GI/1mm 125GSM and 1009 corrosion free, the profile are multi chambered sections with wall thick of 2mm. The EPOM rubber (black colour) oovered with all over the edges of llama and shutter The corners and joints should be welded and cleaned Radiations pin headed glass 4mm thick should be provided in tile louvers. The window should be fixed to the wall with 1009a packing with scraws and silicon packing all round the frames. The vendlator should be got approved from the Executive Engineer before use on work.

Special ceiling plastering in all floors and finishing the exposed surface of RCC items of work such as slab, beam, sunshade, facia, canopy slab, staircase waist slab, landing slab etc., with cement mortar 1:3 (One cement and three plastering sand (P- Sand)) 10mm thick including hacking the surfaces and providing cement mortar nosing, beading for sunshade, staircase, step, landing slab etc., including neat finishing and curing etc., complete complying with standard specification and as directed by the departmental officers.

Plastering with cement mortar 1:5 (One cement and five plastering sand (P- Sand)) 12mm thick in all floors including cost and conveyance of all materials to site etc,complete as per standard specifications

Weathering Course with Concrete Broken Brick (S.I.No.278) & ( P & D) Data 54.Jelly 20mm gauge in pure slaked lime (no sand to be added) over roof slab,the proportion of brick jelly to lime being '32:12.5 well beated with wooden beaters for giving required slope and thickness as directed by the departmental officers etc., complete as per standard specification.

Finishing the top of roof with one course of machine pressed tiles of size 200 mm x 200 mm x 20 mm of approved quality in Cement Mortar 1:3 (One Cement add three plastering sand (P- Sand)) 12 mm thick mixed with water proofing compound conforming to ISS at 2% by weight of cement used and the joints pointed neatly to full depth of tiles with the same cement mortar mixed with red oxide and water proofing compound including curing etc., complete

Paving the floor with design Antiskirt ceramic tiles (colour and shade as directed) of size 305 mm x 305mm x 6 mm in all floors over a base layer of cement mortar 1:3 (one cement and three sand ) 20mm thick laid in-situ and pointed with same coloured cement Colour

Dadooing walls with Glazed tiles of sizes 305mm X200mm X 6mm size of approved make and quality and colour l Set in cement mortar 1:2 (one cement ,two sand) over 10 mm base layer plastering and pointing with white cement neatly as directed.

White washing Two coats using freshly burnt shell lime, in all floors, including cost of lime and other materials such as brushes, kanjee, scafolding charges etc. Complete.

Painting two coats for Interior surface with approved Interior Plastic Emulsion paint approved quality and colour over a priming coat, including thorough scrapping, clean removal of dirt, etc complete and including necessary plaster of paris, putty, wherever required etc, complete as per standard specification

Painting the new iron work with two coats of best approved first quality and colour of synthetic enamel paint over the existing red oxide priming coat in all floors excluding cost of priming coat and including cost of painting materials, brushes, putty, preparation of surfaces and scaffolding charges etc., complete complying with standard specification and as directed by the departmental officer.

Providing & fixing PVC RAIN WATER DOWNFALL PIPE of 110mm dia with necessary T.W.Clamps Plugs, Shoes,Bemds, other clamps, screws nails etc.,complete complying with standard specification. The rate is inclusive of cost of removable iron gratings of appropriate size. The size of Teak Wood plugs used is 150X25mm in front & 200x75mm in rear (wall side) with a depth of 110mm. The pipe is to be fixed by means of "U" clamps at the centre of pipes to be fixed.110mm dia PVC Pipe [4 Kg/SqCm]

Supplying and filling the basement with Well Gravel filling in layers of not more than 15cm thick well rammed watered and compacted - etc., complete complying with standard specification.

Wiring with 2 x 1.5 sqmm (22 /0.3 ) PVC insulated single core unsheathed copper conductor cable of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories inflush with wall with 3mm thick hylum sheet cover with TW switch box and 5A F.T. switch with continuous earth wire connection of 14 SWG TC wire for making good of the concealed portion with suitable colour for PVC concealed light point / Fan point (For Electronic regulator). SD 23

Construction of inspection chambers of following sizes with earth work excavation for foundation , 23cm thick concrete bed using 40mm brick jelly concrete in cm 1:4:8 for foundation , brick work in cm 1:6 for chamber , plastering with cm 1:3 , 12mm thick , benching , channelling , supplying and fixing 45X45cm medium weight L.S cover and frame etc.complete.., (Size 60X60)

Supply and fixing of AC Exhaust Fan 300 mm (12”) sweep (Light duty) including cost of all materials,/abour, lead, lift, etc complete

Supplying and Fixing for 18W 4 Feet LED fitting with LED including Labour Charges Etc Complete

Supply and flxing in position of best lndian make white / colour glazed earthenware lipped mouth flat back urinal of best quality and approved make of size 430mm x 260mm x 350mm with Gl pipe, 32mm dia bell mouth PVC connection and wasle pipe, 1smm dia Gl pipe of required length, 1smm dia GM wheel valve, 1smm dia brass nipple 2 Nos., and fixing lhe urinals in position with necessary TW plugs, clamps, screws, etc., including dismantling masonry and re.dolng the same to the original condition, etc., including painting the pipe with two coats of best quality approved synlhetic enamel paint over one coat of red oxide primer and checked without any leakage etc. complete complying with standard specifications and as directed by the departmental otficers. (The urinal should be got approved by the Executive Engineer before use on works.)

Supplying and fixing in position best quality approved make white glazed earthenware wash hand basin of size 550 X 400mm with a pair of cast iron brackets, including cost of 15mm diametre brass chromium plated piller tape, 32mm diametre C.P.Waste union, 32mm diametre P.V.C.waste pipe with rubber plug and chain, 15mm diametre G.M.wheelvalve, 15mmdia brass nipple, 15mm dia nylon connections etc., including fixing the wash hand basin in the wall in position with a pair of C.I.brackets with teakwood plugs and screws and giving necessary water supply connection and paintiung the brackets with two coats of paint over a primimg coat of anticorrosive paint including testing for leackage etc.,complete complying with standard specifications

Supplying and fixing in position 15mm dia brass CP screw down tap / Pillar tap (heavy duty) of approved make conforming to BIS specifications and quality including cost of shellac, thread, etc., complete complying with standard specification and including cutting and threading wherever ne@ssary. (Taps should be got approved by lhe Executive Fnoineer be-fore use on the works) Pillar Tap

Supplying and fixing in position Indian water closet of size 580 X 440mm, white glazed earthen ware of approved quality with 'P' trap or 'S' trap confirming to IS:2556 - Part XII with sand cushion and forming flooring alround the closet using 40mm broken brick jelly in lime concrete 1:2:5 ( one part of lime, two parts of sand and five parts of brick jelly) 100mm thick and finishing the top to required slope and including giving necessary connection to cast iron soil pipes/ PVC pipes by dismandling brick masonry, reinforced cement concrete roof/floor slab and making good the disturbed portion to original condition without leakage etc., complete complying with standard specifications and as directed by the departmental officers.

Supply and delivery and Iixing of HDPE tank as per lS 12701 / 1996including loading,unloading, transportation and labour charges for fixingof the Gl pipes and specials for pipe connection works including cutting, lhreadino and flxino charoes elc.. (1000 Litre Capacity)

Supply of PVC Pipe and Specials etc Complete 32mm CPVC Pipe M-1096

32mm CPVC Coupler M-1180

32mm CPVC Bend M-1175

32mm CPVC Elbow M-1165

32mm CPVC End Cap M-0907

32mm CPVC Tee M-1171

32mm Non Return Valve WD-M0618

75mm PVC Pipe M-0869

75mm PVC Coupler WD-M0106

75mm PVC Bend M-0959

75mm PVC Elbow M-0939

75mm PVC End Cap WD-M0115

75mm PVC Tee M-0947

110mm PVC Pipe M-0872

110mm PVC Coupler WD-M0106

110mm PVC Bend M-0961

110mm PVC Elbow M-0941

110mm PVC End Cap WD-M0115

110mm PVC Tee M-0949

PVC Adhesive (Solution) - 100Gram M-0519

Plain Cement concrete 1:11/2:3 (one cement, One and Half sand, Three Course aggregate) using 20mm gauge hand broken granite stone jelly for foundation including dewatering if found necessary and laid in layers of not more than 15cm thick and compacted, etc., complete complying with standard specfication.

Supply and delivery of following sizes of FRC Manhole Covers / Frames to stores as per IS 12592:2002 to its latest revision with reinforcement details for covers and frames (600mm dia FRC manhole cover to suit 600 mm clear opening manhole frame)

Supply of PVC pipe and G.I pipes and PVC pipe & Specials. Borewell to Delivery Line , WORKING PRESSURE: 10 kg. per cm2 40mm PVC Pipe

40mm PVC Coupling

40mm PVC Tee

40mm PVC Elbow

40mm CPVC Pipe M 1095

40mm CPVC Coupling M-1138

40mm CPVC Tee M-1121

40mm CPVC Elbow M-1115

40mm CPVC Union M-1128

CPVC Adhesive

100mm x 75mm PVC Nahini / Floor Trap with PVC Grating M-0572

Brass Chromium Plated Screw Down Tap 15 20mm dia (Heavy Type) M-0508

Brass Isolation Valve suitable for the copper pipe and should be of non lubricated 90 degree turn lever ball valve of reputed make, conneced in line with medical gas pipe line system by using suitable size brass valve adopter union, ferrule, nipple, rubber O' ring, tapion lap and etc. All pipe line regulators shall be capable of controlling pipe line pressure and must compatible with the requirements specified in IS 12827-1989. All valves should be pneumatically tested for twice the working pressure for the gas line as per IS Code 12827 / 1989 &ISO 7396 / 1987 Sepecification. (28mm) M-0738

Providing Geological survey to fix the borewell point Quotation

Drilling 150mm dia borewell in all kinds of soils expect hood rock by first taking pilot bore and than enlarged to the required dia to enable to inserting the P.V.C. Casing pipe by directed rotary mud and circulation method including all labour and Water etc.. WD-W0783

Supply of 150mm dia P.V.C. Casing pipe 150mm PVC CASING PIPE AS PER IS 12818 / 2010 150mm CM WD-M0028

Labour charges for inserting casing pipes assembly (With slot or without slot) in the drilled hole including welding the joint etc., complete and supplying and packing the annular space with pebbles of size and quality as approved by the Executive Engineer WD-W0772

Drilling of borewell anywhere in-Tamilnadu including transportation from one place toanothar place within Tamilnadu in alluvaial soil or sedimentary strata of clay and sand or sand, stone, shale, pebbles, boulders etc., by first taking a pilot bore of 140/150mm dia and then enlarging to requierd dia by direct or reverse rotatry mud and circulation methd using contractor's rig, fuel, labour, drilling, at the site shown by the Deparment Officers including construction of mud pit.(From 120 m upto 150 m Depth ending from ground level) WD-W0785

Supply of PVC Casing Pipe As Per IS 12818/2010 150mm CM

Charges for developing the Borewell with air compressor of 600 CFM capacity (Minimum 8 Hours) including transportation, labour and fuel charges for compressor as directed by TWAD Officers and conducting yield test by 'V' notch method. WD-W0833

Supply and delivery of clear water vertical wet type submersible pumpset suitable for 150mm dia borewell conforming to IS 8034/2002 as amended thereafter and BEE 3 Star Rated capable of discharging noted LPM against head of water column due to all causes.The pump shall be with stainless steel shaft and dynamically balanced bronze or Cast SS impeller, brass screws and CI FG 200 grade pump bowl/diffuser with ISI mark. The pump shall be directly coupled to a continous rated two pole suitable wet type vertical squirrel cage induction motor as per IS9283 /1995 as amended there 100x75 WD-M1641

THREE PHASE PANEL BOARD- D.O.L. WITH TWO LEVEL GUARD AND AUTO START Supply and delivery of direct online starter confirming to S13947 and IEC 947 suitable KW rating for operation in AC/single Phase/50HZ(± 5%) and 415 V(±10%) including Ammeter, Voltmeter, Thermal Overload relay, 16 Amps 2 pole Magnetic Contactor with under Voltage protection, Indication lamp, starting capacitor, running capacitor and On/Off Push button switches, 5 way connector, wiring with 1 sq. mm/1.5 sq. mm copper PVC insulated cable, powder coated vermin proof box including the capacitor (the cost of capacitor is to be taken separately). 3Hp submessible WD-M1910

Supply and delivery of PVC insulated and sheathed 4.00sqmm copper cable conforming to IS 694/1990 suitable for submersible pump set.WD-M1975

Supply of PVC pipe and G.I pipes and PVC pipe & Specials. 40mm UPVC Pipe - M-1087

Nylon Rope M-1072

32mm GM gate Valve M-0500

32mm GM non return Valve M-0500

32mm GI Elbow M-0448

32mm PVC Pipe M-0877

32mm PVC Coupler M-0883

32mm PVC Tee M-0901

32mm PVC Elbow M-0889

40mm Clamp set -M0617

150mm borewell cover

Labour charges for the erection of submersible pumpset in borewell/openwell including fixing and jointing submersible cable with proper clamps upto the starter to required depth and also fixing of riser pipes to the required depth valves erection clamps, pressure gauges upto the exterior wall of pump room and erection of panel board consisting of TPICN switches starter, Voltmeter, Ammeter, three pilot (indicating) lamps capacitor single phasing preventor, water level guard and laying and jointing the cables and twin earthing as per IE rules etc., complete and testing the pumpset and trail run for 10 days. Upto 5 HP WD-W0871

Supply and fixing of TNEB meter board suitable for 32A single phase service connection with 32A fuse unit (500V) 32 A neutral link and earth link (1"x1/8"copper flat) on TW plank of size 375mm x 300mm x 19mm with supporting TW reepers of 1"thick an either side with painting with suitable bolt and nuts for fixing the TW plank on wall with earth connection and interconnection with 7/20 PVC insulated copper wire from EB meter to fuse unit with 1No 40Amp 30MA Double Pole RCD / RCCB (Lower End) with suitable necessary connection SD125

Picking the Existing damaged Clean removal of cement plaster from walls etc Complete

Plastering with CM1:5 (one cement and five sand) 20mm thick, in all floors including cost and conveyance of all materials to site and labour charges etc , Complete as per Standard Specification 10m2.

Dismantling Plain Cement Concrete etc Complete

Supplying and laying in flooring with Polished Shahabad Stone Slabs 20mm thick with Machine Cut Edges of size below 2'0" x 2'0" laid over base layer of cement mortar 1:2 (one cement and three sand) -20mm thick and applying cement slurry & pointed with white cement and colour pigments to the colour of stones and polished neatly as directed by the deparmental officers

Dismantling, clearing away and carefully stacking materials useful for re-use for any thickness of walls Brick / Stone Masonry in cement mortar walls under 3m high

Fabricating, Supplying and fixing M.S.Pipe Posts for Chain Link -2" x 2" using 10 Gauge Galvanized Iron Wire (of all sizes ) Chain Link fencing of size 100mm MS Pipe Below ground level of 60cm and above ground level of 2.40m including cost of steel and binding wire and laying cement concrete 1: 2 : 4 - 20mm size etc Complete

Supplying, fabricating, erecting structural steel work for roofing welded or bolted type using MS channels ,angles, plates and round bars etc. conforming to IS specification including primer coating and enamal painting as per Design given by the departmental officers etc, complete as per standard specification.

Painting two coats with ready mixed Old Wall Surface Plastic Emulsion Paint approved quality and colour over a priming coat, including thorough scrapping, clean removal of dirt, etc complete and including necessary plaster of paris, putty, wherever required etc, complete as per standard specification. - 10 sq.m

Painting One coats with Ready Mixed Enamel Paint over the Old iron works of approved quality and colour without priming coat including the cost all materials etc.,complete, in all floors.

Painting two coats with Ready Mixed Enamel Paint over the New iron works of approved quality and colour without priming coat including the cost all materials etc.,complete, in all floors.

Painting old wood work with one coat of Synthetic Enamal paint of approved quality including cleaning the old surface by mannual labour.

Hire charges for deploying earth moving machinery (JCB/Poclain) for earthwork including diesel, oil and labour charges etc., complete

Hire Charges for planys and Machineries Tractor with Trailar including Driver and Fuel etc Complete

Supply of Labours using sectioning and Levelling Works etc Complete Mazdoor-I

Supply and Fixing For Mosquito Net Using Doors & Windows Including Labour Charges and Etc.Completed Manvi Upgraded & Stitched - Window Mosquito Net, 120 GSM Fiberglass Insect Net (Color-Grey) (4 * 5 ft) Manvi Upgraded & Stitched - Window Mosquito Net, 120 GSM Fiberglass Insect Net (Color-Grey) (4 * 5 ft)

Supply and fixing of 65 mm dia. (2 -1/2") GI pipe (class B) of 6 metre length with 300mm x 300mm x 6mm MS base plate duly welded at the bottom with concreting with construction of masonary pedestal with suitable SMC box with door arrangement to house 6A SP MCB switch, 2/4 way connector on suitable hylem sheet and supply and fixing of 48W LED street light fitting with LED (Higher end) with 1 metre 32mm dia. GI pipe (class B) Complete with suitable MS clamps for LED street light fitting and SMC box with PVC unsheathed FRLS copper leads from SMC box to fitting and with painting of suitable colour .SD 465 Ele Data 2025-2026 P.No : 199

Supply and fixing of 65 mm dia. (2 -1/2") GI pipe (class B) of 6 metre length with 300mm x 300mm x 6mm MS base plate duly welded at the bottom with concreting with construction of masonary pedestal with suitable SMC box with door arrangement to house 6A SP MCB switch, 2/4 way connector on suitable hylem sheet and supply and fixing of 30W LED street light fitting with LED (Higher end) with 1 metre 32mm dia. GI pipe (class B) Complete with suitable MS clamps for LED street light fitting and SMC box with PVC unsheathed FRLS copper leads from SMC box to fitting and with painting of suitable colour ..SD 454 Ele Data 2025-2026 P.No : 201

Supply and fixing of 4 Feet LED 18W Fitting with LED 18W tube (Lower End) complete with TW round block son wall or ceiling with PVC unsheathed FRLS Copper leads from terminals to the fitting

Supply and fixing of 48W LED street light fitting with LED (Higher end) with 32mm dia. GI pipe (class B) with 1 no.32 mm dia GI bend complete on the existing post/ on wall with PVC unsheathed FRLS copper leads with MS clamps and with painting . SD 448

Supply and fixing of 1200mm (48") Sweep AC ceiling fan complete with stepped electronic 300W regulator with 1metre down rod with fan clamp with side plates and cross arm of size 450mm (18") SD 464

Wiring with 2 x 1.5sq.mm. PVC insulated single core unsheathed FRLS copper conductor cable of 1100V grade insuitable heavy gauge MS conduit pipe on wall and ceiling with MS accessories with MS switch Box and 5AFT switch with painting of suitable colour continuous earthwire connection of 1.5sq.mm copper wire for light point / fan point (for electronic regulator)

Supply and Fixing for SERVICE CONNECTION ACCESSORIES L.T. 1100V PVC ALUMINIUM ARMOURED UNDER GROUND CABLE WITH ISI MARK etc Complete 3 1/2 core 25 sq.mm. PVC Armoured UG Cable M-1549 SOR25-26

31/2 core 35 sq.mm. PVC Armoured UG Cable M-1550 SOR25-26

Supply and laying of the following size of PVC armoured LTUG cable in a trench to be excavated at a depth of 0.75 metre putting 0.15metre layer of sand and covering the three sides of the cable with brick sand refilling the earth to make good etc Complete., 3 1/2 core 25 sq.mm. PVC Armoured UG Cable

31/2 core 35 sq.mm. PVC Armoured UG Cable

Supply and Fixing for PVC Rigid PIPES (1.8MM THICK) WITH ISI M-1650 etc Complete PVC Rigid Pipe 40mm (11/2”) SOR p.no:232

Supply and Fixing for MS Box complete with Lock & Key arrangements with painting of size 300 x 200 x 100mm etc Complete M1604 SOR p.no:229

Supply and fixing of 7 segment 4 way TPN MCB sheet steel distribution board (Higher end) with metal / acrylic door cover flush type /surface type fitted with busbars and neutral links with single / three phase MCB outgoings and seperate 4 way provision for accomodating one No 4 pole incoming MCB / Isolator and another seperate 4 way provision for accomodating one No 4 pole ELCB / RCD (totally 8 ways in one segment) (3x 4 ways in Each segment) and seperate provision for MCB / Isolators ( totally 12 Nos) for sub incomers in 3 segments with lable holder and provison for taking up cable for size not less than 35 sq.mm. with the following on wall with Earth connection only.

Supply and Fixing for PLUG AND SOCKETS IN SHEET STEEL ENCLOSURE WITHOUT MCBs - HIGHER END 20A Single Pole M 1790

20A Double Pole M 1791

Supply and Fixing for RCCB / ELCB - HIGHER END M 1805

CT Metering Panel - Supply, Installation, Testing and Commissioning of CPRI approved make of panel, cubicle type, Free standing, floor mounted, single front, 14 SWG CRCA sheet steel, enclosed separate compartment for each feeder, front operated, Powder coated, indoor type dust and vermin proof, hinged lockable doors, complete with electrolytic grade copper bus bars, internal wiring, colour coding, ferrules, Panel mounting MS Channels, fasteners, etc., including all associated control wiring.1set of 400/5A CT with TNEB Metering provision and 1nos of 400/5A CT for APFCR (Rate As per quotation)