AGE (I)/D-59/20-21

Amount

Excavation in trenches n.exc 1.5m wide and n.exc 1.5m for laying cables, stays etc and getting out in hard dense soil all as specified.

Removal of surplus soil to a distance not exceeding 50 mtr away and depositing where directed at a level not exceeding 1.5 mtr above the starting point complete.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc. 25 cms thick in soils complete all as specified

Sand cushioning to underground cables 8 cm below the cable before laying and 15 cm above the cable after laying, complete all as specified in clause 19.75 of SSR Part-I, complete all as specified. Note:-Punned thickness shall be measured.

M&L for bricks common burnt old size sub class `B' bricks laid dry for cable protection flat width wise complete all as specified and directed.

Supply and Laying and jointing testing and commisioning in replacement size of 25 Sqmm 4 core XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric power cable (heavy duty) with multistranded aluminum conductors, 1100 Volt grade, laid in trenches / ducts / encased in GI pipe / fixed to pole/wall etc and including taking down old unserviceable cables complete all as specified and directed.

Supply and Laying and jointing testing and commisioning in replacement size of 16 Sqmm 4 core XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric power cable (heavy duty) with multistranded aluminum conductors, 1100 Volt grade, laid in trenches / ducts / encased in GI pipe / fixed to pole/wall etc and including taking down old unserviceable cables complete all as specified and directed.

Disconnecting and Taking out old unserviceable LT armoured, PVC cables of any type/ size/ core/ any voltage grade from trenches for replacement complete, all as specified and directed.

Supply & lay GI tubing light grade 40 mm dia bore in protection of cable at road crossing /hard standing/pole protection fixed with clamps as per site requirement etc all as specified and directed.

Supply & lay GI tubing light grade 32 mm dia bore in protection of cable at road crossing /hard standing/pole protection fixed with clamps as per site requirement etc all as specified and directed.

Cutting of road / hardstanding upto a size not exceeding 20 cms in width and not exceeding 60 cms in depth for laying of LT UG cable protection pipe line making good the disturbed portion so as to match existing finishing or with PCC 1:2:4 type B1 complete all as specified and directed.

M & L for in repair cement concrete PCC 1:4:8 type D-2 using 40mm graded stone aggregate as in pole/bollard light foundation and coping complete all as specified and directed.

M&L for preparation of surfaces, scraping of old paint of steel surface of poles and applying two coats of aluminium paint over a coat of red oxide primer of LT steel tubular pole 9 metre hight, Including fixing of reflection tape/reflection paint in altternate coloured of width 6" on poles 1.5 to 1.8 metre above the ground level including writing pole number with black letter under yellow circle complete all as specified and directed. Note :- The reflection tape/reflection colour shall be as directed by Engr-in-charge.

Unbinding from insulators ACSR conductor any size of LT over head line for repairs, restretching of ACSR conductor to achieve proper sag and rewinding to the insulators using aluminium/GI wire all as required at site or directed. Note:- Distance between two poles irrespective of no of lengths of conductor shall be considered as a single span.

Cutting/ trimming of tree branches clearing 5 metres horizontal and 5 metres vertical distance from both sides of conductor including removing branches from site, complete all as specified & directed. Note:- (i) Clearing branches from both sides of conductor in between two consequtive poles shall be considered as one span irrespective of distance between poles.(ii) Cost of T&P required for cutting and removing branches shall be deemed to be included in rate quoted by bidder.

Dismantling ACSR or AAC conductor complete of any type and size complete all as specified.

Supply and stringing ACSR conductor in replacement of (Weasel/ Ferret) on on LT over head line securing on pole complete including necessary binding work, jumpering, PG clamp, maintaining proper sag as per IE rule complete all as specified & directed. Make:-Bharat conductor /ICC /Alind (Note :- (a) Rate is inclusive of jumper on cut point/2 pole structure shall be provided with PVC insulated sleeve.

M & L for Shackle Type, Porcelain, vitreous, white, brown or green insulator including galvanised mild steel straps, washers,insulator bolts, washers and nuts, for 75 mm height, 90 mm dia, 1100 volts grade all as specified and directed by Engr in Charge.

Supply & fixing in replacement solar panel maximum power 100 Wp, Open circuit voltage(Voc) 21 V, Short circuit current (Isc) 6.35 A along its fixing accessories complete all as specified and as directed by Engr-in-charge,

Supply & fixing in replacement solar low maintenance flooded battery along with GI Battery Box, Nominal Voltage-12 Volts capacity-65 AH of make luminious, Exide, Southern, Tata, Green, Amron) complete with GI Battery Box including fixing arrngement Complete all as specified and as directed by Engr-in charge,

Supply & Fixing in replacement Solar LED luminaires 18-20 Watt with Fixing accessoies complete all as specified and as directed by Engr-in-Charge . NOTE:- Contractor should to Check the sample and make at site of srl item No 20 to 22 before Quoting the rate.

Supply & fixing of Automatic Street Light Control Switch using Infrared Sensor based on NATURE SWITCH for automatic switching of Street Lights. Nature Switch operation should be based on Natural Light Lux* level. Required Illuminance Level for Switching ON is ≤ 30 Lux and for Switching OFF ≥ 10 Lux. The Sensor should also have part night operation facility of min. 4 hrs. to max. 12 hrs.Three-Phase load of 8kW (Swadeep-02EC8kW3P) with 3 nos. Contactors, 3 nos. Incoming MCBs & 3 nos. Outgoing MCBs of 20-32 Amps each & Circuit wiring (Copper) of min.10 sq.mm The Sensor along with suitable Power Contactor(s) and Incoming-Outgoing MCBs should be enclosed in a pole/wall mountable Rust Proof, Electric Shock Proof, Termite proof and FR grade SMC Enclosure conforming to IP54. The circuit should also have provision for Manual Operation (i.e. Sensor By-Pass option). complete all as specified and directed. Make-HEALER ENTERPRISES, BHOPAL OR EQVT in CG/Philips.

Supply and fix in replacement of surge protection device, 5KV suitable for 25 to 60 watt LED fitting complete all as specified and directed. Make- Crompton/Bajaj/Philips

Supply and fixing in replacement of electronic driver suitable for 25/30 Watts LED fitting complete all as specified and directed. Make: Phillips / Bajaj / Crompton / Havells.

Supply and fixing in replacement of electronic driver suitable for 45/48 Watts LED fitting complete all as specified and directed. Make: Phillips / Bajaj / Crompton / Havells.

Supply and fixing in replacement of electronic driver suitable for 60/72 Watts LED fitting complete all as specified and directed. Make: Phillips / Bajaj / Crompton / Havells.

Supply and fixing in replacement of unserviceable flood light luminaire of HPSV/MH, with 120 Watt LED flood light fitting consist of PDC aluminium houseing in powder coated dia costing power coted in gray finish, high power LED with IP- 66 protection, fins are provided on housing, heat resistant tempered glass for protection with 5 kv surge protection, 5700K complete all as specified and directed. NOTE :- Cost of Necessary tools and plants such as ladders, hydra for repair of high raised high bay / medium bay /low bay luminaires, security light /high mast light fittings etc should be deemed to be included in the unit rate quoted. Make :- Cromton - Cat part No. LFLN-120-CDL/60-M or Eqvt Make of Philips /Havells /Wipro/ Bajaj.

Supply and fixing in replacement of street light luminaire of HPSV with LED street light fitting consist of die cast body with heat resistant toughened glass having IP 65 protection level of 25 Watts complete all as specified and directed. Make- CG part No. LSTS-25-CDL-M or Eqvt Make of Philips/Havells/ Wipro/Bajaj/Halonix.

All as per item No 35 above but of of 30 Watts .Make- CG part No. LSTS-30-CDL-M or Eqvt Make of Philips/Havells/ Wipro/Bajaj/Halonix.

All as per item No 35 above but of 45 Watts .Make- CG part No. LSTP-45-CDL or Eqvt Make of Philips/Havells/ Wipro/Bajaj/Halonix.

All as per item No 35 above but of 72 watt LED Make- CG part No. LSTP-72-CDL-M or Eqvt Make of Philips/Havells/ Wipro/Bajaj/Halonix.

Supply and Fixing in replacement with 1.5 sqmm 3 core PVC insulated and PVC round sheathed multistranded copper conductor flexible industrial cable 1100 V grade drawn through supply and fixing PVC conduit (junction box to street light fitting) in street light poles and Disconnection of street light fittings and refixing complete all as specified and directed.

S & F in replacement U/S GI Bands with GI pipe medium grade 32 mm dia bracket 1.5 mtr long by hydrolic pressed mechine bend to require shape, 02 nos clamp made out of MS flat iron 40x6mm of suitable size fixed with bolts,nuts and washers including drilling holes and grouting with the same for fixing bolts complite as required duly painted with two coat of aluminum paint over a coat of red oxide primer and fixing the existing street light fitting complete all as specified and directed. (Rate quoted by the contractor shll deemed to include for nuts and bolts).

M&L in replacement of FRP junction box of size 325 X 220 X 150 mm having 4 Nos aluminium bus bar of size 25X4 mm fixed on epoxy insulators with MCB SP 6 Amps,fixed on the pole with clamps,nut bolts etc.complete all as specified and directed. Make- Sintex or equivalent.

malghotra construction co

M/S MALHI CONSTRUCTIONS