Loading…
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹4.3 Cr
EMD Value
₹23.8 L
Closing Date
24 Jan 2026, 12:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Superintending Engineer
Office of the Superintending Engineer, Bahraich-Shrawasti Circle, P.W.D., Bahraich
Construction of 3x18.00 mtr Span RCC Small Bridge at Block Ekauna ke Gram sabha in Mujhaniya on Purani Rapti Nale Year 2025-26 in District Shrawasti.
2026_CEDPW_1105928_1
3993 /8 Kam/e_Tendering/BRH-SWT Circle/2025-26 Dated -12-12-2025
Open Tender
Civil Works - Bridges
Fixed-rate
360 days
Shravasti
Please refer Tender documents.
2 documents required · 2 mandatory
₹2,715
₹23.8 L
Yes
Bahraich
1 Apr 2026
14 Jan 2026
24 Jan 2026
14 Jan 2026
24 Jan 2026
14 Jan 2026
16 Jan 2026
Providing, laying and spreading cement treated granular sub-base on a prepared sub grade, Ordinary Portland Cement @ 2% by weight to the spread material manually, mixing in place with Road Star Rotavator and compacting with the road roller at OMC to achieve the desired unconfined compressive strength and to form a layer of base.
Providing, laying and spreading Cement WMM Grade III on a prepared base, Ordinary Portland Cement @ 4% by weight to the spread material manually, mixing in place with Road Star Rotavator and compacting with the road roller at OMC to achieve the desired unconfined compressive strength and to form a layer of base/ sub base.
Providing and applying Tack coat with bitumen (V.G.-10) using bitumen distributor at the rate of 0.35 kg per sqm on the prepared granular surfaces treated with primer & cleaned with Hydraulic broom as per Technical Specification Clause 503
Providing, laying and rolling of open - graded premix carpet of 20mm thickness composed of 13.2 mm to 5.6 mm aggregates either using penetration grade bitumen to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 80-100 kN static roller capacity, finished to required level and grades to be followed by seal coat of Type C.
Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using type C as per Technical Specification Clause 510
Construction of embankment with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacting to meet requirement of table 300-2. 5 km Cartege
Brick soling with straight over burnt bricks (M-275) laid on edge and dry labour only including preparation of sub-grade to prescribed camber filling joints with local earth spreading binding coat 1 cm. 3/8" depth of 'local earth over the entire surface .
Providing & laying of filter media underneath pitching of slope with including supply of all material labour T&P etc. MORD S.No. 14.6
P/L of 25-60 Kg stone boulder pitching on slope of approach including cost of material labour T&P etc complete. MORD S.No. 14.5
Providing, laying and spreading cement treated granular sub-base on a prepared sub grade, Ordinary Portland Cement @ 2% by weight to the spread material manually, mixing in place with Road Star Rotavator and compacting with the road roller at OMC to achieve the desired unconfined compressive strength and to form a layer of base.
Providing, laying and spreading Cement WMM Grade III on a prepared base, Ordinary Portland Cement @ 4% by weight to the spread material manually, mixing in place with Road Star Rotavator and compacting with the road roller at OMC to achieve the desired unconfined compressive strength and to form a layer of base/ sub base.
Providing and applying Tack coat with bitumen (V.G.-10) using bitumen distributor at the rate of 0.35 kg per sqm on the prepared granular surfaces treated with primer & cleaned with Hydraulic broom as per Technical Specification Clause 503
Providing, laying and rolling of open - graded premix carpet of 20mm thickness composed of 13.2 mm to 5.6 mm aggregates either using penetration grade bitumen to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 80-100 kN static roller capacity, finished to required level and grades to be followed by seal coat of Type C.
Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using type C as per Technical Specification Clause 510
Eartwork in Cutting or embankment in ordinary soil excavation to be in the farm or regular pits not exceeding 0.50 mtr in depth and earthwork in embankment to be in 20 cm layers, including ramming and dressing the surface to required levels and slope and also including lift upto 1.50 mtr and lead upto 30 m The earth cutting to be uesd to be deposited as spoils banks with in 30 mtr distance as directed by Engineer in charge.
Construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of Table 300.2 with lead upto 1000 m as per Technical Specification Clause 303.1.
Earth Work in excavation for structure including disposal upto a lead of 50 m, dressing of side and bottom and backfilling in trenches with excavated suitable material etc. complete as per Technical Specification. MORD S. No.11.1
P/L Cement concrete in 1:4 :8 with cement, fine sand and 40mm gauge Brick ballast below parapet of cuvert including cost of all labour materias, and T&P etc. required for proper completion of the work.
Providing & laying of filter media underneath pitching of slope with including supply of all material labour T&P etc. MORD S.No. 14.6
Supply & Laying of 900mm dia NP-3HP including loading unloading cartage and all taxes etc complete.
Brick work with 150 class brick and 1:3 cement and coarse sand in foundation and plinth including cost of all labour materias, and T&P etc. required for proper completion of the work.
Pointing with cement mortar 1:3 on Brick work in cement mortar i/c etc. complete as per Technical Specification
Providing and contructing Temporary Island 16.00 m dia. For construction of well foundation of 8.00 m dia. Assuming depth of water 1.00 m and height of island to be 1.25 m.
Providing and Laying Cutting Edge of Mild Steel weighing 40 kg per metre for Well Foundation complete as per Drawing and Technical Specification.
Plain/Reinforced cement concrete M-25 grade, in well foundation in well curb complete as per drawing and technical specification
Plain/Reinforced cement concrete M-25 grade, in well foundation in well Steining complete as per drawing and technical specification
Plain/Reinforced cement concrete M-25 grade, in well foundation in well Steining complete as per drawing and technical specification
Plain/Reinforced cement concrete M-25 grade, in well foundation plugging the bottam of well complete as per drawing and technical specification
Plain/Reinforced cement concrete M-15 grade, in well foundation in itermediate plugging of well complete as per drawing and technical specification
Plain/Reinforced cement concrete M-35 grade, in well foundation in well cap of well complete as per drawing and technical specification
Sinking of 5 m external diameter well (other than pneumatic method of sinking) through all types of strata namely sandy soil, clayey soil and rock as shown against each case, complete as per drawing and technical specifications. Depth of sinking is reckoned from bed level. 0 to 3.00 m
Sinking of 5 m external diameter well (other than pneumatic method of sinking) through all types of strata namely sandy soil, clayey soil and rock as shown against each case, complete as per drawing and technical specifications. Depth of sinking is reckoned from bed level. 3.00 to 10
Sinking of 5 m external diameter well (other than pneumatic method of sinking) through all types of strata namely sandy soil, clayey soil and rock as shown against each case, complete as per drawing and technical specifications. Depth of sinking is reckoned from bed level. 10 to 20
Supplying, fitting and placing un-coated Mild steel reinforcement complete in foundation as per drawing and technical specification
Sand Filling in Wells complete as per Drawing and Technical Specifications.
Plain/Reinforced cement concrete 30 grade, in sub-structure complete as per drawing and technical specification
Plain/Reinforced cement concrete 30 grade, in sub-structure complete as per drawing and technical specification
Plain/Reinforced cement concrete 30 grade, in sub-structure complete as per drawing and technical specification
Plain/Reinforced cement concrete 30 grade, in sub-structure complete as per drawing and technical specification
Plain/Reinforced cement concrete 30 grade, in sub-structure complete as per drawing and technical specification
Plain/Reinforced cement concrete 30 grade, in sub-structure complete as per drawing and technical specification
Supplying, fitting and placing un-coated HYSD bar reinforcement complete in sub-structure as per drawing and technical specification
Suppling, fiting and fixing in position true line and level elastomeric bearing complete as per drawing and technical specification
Furnishing and placing Reinforced cement concrete 40 grade in super structure complete as per drawing and technical specification
Furnishing and placing Reinforced cement concrete 40 grade in super structure complete as per drawing and technical specification
PCC M-15 grade levelling course below approch slab complete as per drawing and technical specification
Reinforced cement concrete M-30 grade in approch slab complete as per drawing and technical specification
Furnishing and placing cement concrete M-30 grade in wearing coat complete as per drawing and technical specification
Provision of R.C.C. crash barrier at the edge of the road approch to bridge super structure and median with M-40 grade C.C. with HYSD reinforcement and dowel bar as per dimension in approved drawing .
Supplying, fitting and placing un-coated HYSD bar reinforcement complete in sub-structure as per drawing and technical specification
Drainage Spouts complete as per drawing and Technical specification
Providing and laying of a strip seal expansion joint catering to maximum horizontal movement upto 70 mm, complete as per approved drawings and standard specifications to be installed by the manufacturer/supplier or their authorised representative ensuring compliance to the manufacturer's instructions for installation.
Providing and applying 2 coats of water based cement paint to unplastered concrete surface after cleaning the surface and applying paint @ 1 ltr. For 2 sqm
The Above Rates Are Exclusive of GST
stage.html
html • 0.02 MB
cancelled_1.pdf
pdf • 0.20 MB
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 3.42 MB
T_2.pdf
Tender Documents • 0.51 MB
BOQ_2040557.xls
BOQ • 0.31 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .