RequiredAnnual Turnover
RequiredCertificate (Requested in ATC) Bid to RA enabled No Thanda Garam Pina Alpahar Kit (Gujarat Govt) ( 1938 pieces ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Bid Requirement (Allowed Values) General Parameters Purpose of kit To sell Tea/Cold Drinks/Light Refreshment * Items in the kit provided Hand lorry with four wheel rim set
Requiredpan (thalu)
RequiredKamans
RequiredVertical pole with stud
Requiredlockable all side cover
Requiredaldrop kit top cover * 1/15 Pan (Thalu) Parameters Material of Pan (Thalu) Dry Chill Wood * Size of Pan (Thalu) ( L x W x T ) in mm x mm x mm (with ± 1 percent tolerance) 1575 x 990 x 20 * Width of each Plank in mm 150 * Number of support at bottom of pan provided 2 * Size of support at bottom of pan in mm (with ± 1 percent tolerance) 75 x 37.5 * Number of supports at both ends and in the middle of Pan 3 * Size of wooden support at both ends and in the middle of Pan in mm (with ± 1 percent tolerance) 37.5 x 50 * Material of supports Wooden * Material of border Wooden * Size of border in mm 50 x 50 * Hinges provided 3 MS hinges of 50 mm (2 Inch) length fix on each border with the help of wooden screws at equal distance * Number of Kaman provided 4 * Material of Kaman (Bend Kaman) Mild Steel * Size of Kaman in mmxmm 40 x 5 * Total weight of all Kaman in kg (approx) 10.4 * Conformity of standard of Wheel set ( RIM) BIS marked as per IS :624-2003 * BIS License number for wheel set (rim) - * Material for wheel set (Rim) Chrome Steel * Wheel set of size (D x W ) in mm x mm 700 x 37.5 * Thickness of Rim in mm more than 1.3 * 2/15 Rubber Langot around each in provided 4 * Numbers of Spokes with nippls provided 40 * Diameter of Spokes in mm 3.25 * Conformity of standard of Tyre BIS marked as per IS :2414-2005 having 12 Ply * BIS License number for tyre - * Conformity of standard of tube BIS marked as per IS : 2415-2014 * BIS License number for tube - * Number of Wheel set (Rim) including spoke with nipple
RequiredTyre and tube provided 4 * Hub
RequiredBall bearing and Bearing cover should be provided to each wheel Yes * All sharp corners should be rounded Yes * Round Bars to Join All Kamans parameters Number of Round stud with spring washer to connect kaman provided 4 * Material for Round stud MS * Size of Round stud in mm 10 mm diameter having M-10 nuts * Length of round stud mm (with ± 1 percent tolerance) 610 * Other round studs provided One number of MS round studs of 10 mm diameter having M-10 nut and spring washer of 840 mm length (with ± 1 percent tolerance in length) * Number and Type of support to connect middle of kaman and pan (thalu) of lorry 2 Number of L shape made of MS * Size of support for Kaman in mm 40 x 5 * 3/15 Length of support for kaman in mm (with ± 1 percent tolerance) 500 * Vertical Pole with Stud parameters Material of conduit pipe MS (Square Conduit pipe) * Size of conduit pipe in 50 mm x 50 mm x 1.0 mm (thick ) x 925 mm length * Type of stud provided (Hint Stud at each end which is welded centrally into conduit pipe ) MS Stud with size of 10 mm diameter x 1175 mm length having M10 threads upto 125mm length * Number and size of holes provided ( Hint Hole on each vertical support at required point for operating stoppers ) 4 hole of 8 mm diameter * For locking of covers required chains are fixed on each vertical support to keep bottom part of each cover in horizontal position whenever it may found necessary provided Yes * Pavan Ankadi Provided (Hint Pavan Ankadi which is fixed with each vertical support at appropriate point to keep top part of each cover in horizontal position whenever it may found necessary by inserting another free end of pavan ankdi into Latches 4 set made of MS rod of 8mm diameter x 300mm length * Top Cover parameters Material and size of top cover Galvenized iron sheet of 1575mm length x 990 mm width x 0.56mm thickness * Frame of size in mm 1575mm x 990mm * Material and size of frame MS Rectangular pipe of size 50 mm x 25mm x 1mm thickness * Top cover should be mounted on frame with the help of metallic screws Yes * Material and size of MS Square conduit pipe * 4/15 middle supports of 25mm x 25mm x 1mm thickness having 1475mm length Material and size of supprots welded between frame and middle support at equal distance 4 number made of MS Square conduit pipe of 25mm x 25mm x 1mm thicness having 432.5mm length * Lockable Front Side Cover parameters Material and size of Top part of front side cover 0.56 mm thick Galvenized Iron sheet of size of 1575mm x 600 mm * Type of supports provided forTop part of front side cover 2 wooden supports of 1475 mm long having size of 50mm width and 25mm thick and 3 wooden supports of 500mm long having size of 50 mm width and 25mm thick are fixed with the help of wooden screws * Position of top part of front side cover Hinged on bottom side of MS Rectangular pipe with the help of three numbers of 50 mm (2 inch) long MS Hinges and metal screws * Latche (Nakucha) for Pavan Ankadis for Top part of front side cover Latche (Nakucha) fixed at appropriate point of each end of a top part of front cover for Pavan Ankadis * Stopper for top part of front side cover provided 2 MS stoppers * Material and size of Bottom part of front side 0.56 mm thick Galvenized Iron sheet of size of 1575mm x 325 mm * Type of supports provided for Bottom part of front side 2 wooden supports of 1475 mm long having size of 50mm width and 25mm thick and 3 wooden supports of 225 mm long having size of 50 mm width and 25mm thick are fixed with the help of wooden screws * Position of bottom part of front side Hinged on top of border of a Pan (Thalu) with the help of 3 numbers * 5/15 of 50 mm (2 inch) long MS Hinges and wooden screws Covering of bottom part of front side 0.56. mm thick GI sheet with the help of wooden screws * Chain position of bottom part of front side Free end of 2 chains are fixed at appropriate point on a cover during assembling of a hand lorry * Stopper for bottom part of front side provided 2 MS stoppers * Lockable Right Hand Side & Left Hand Side Cover parameter Material and size of Top part of RHS & LHS cover 0.56 mm thick Galvenized Iron sheet of size of 1575mm x 600 mm * Type of supports provided for Top part of RHS & LHS cover 2 wooden supports of 1475 mm long having size of 50mm width and 25mm thick and 3 wooden supports of 500mm long having size of 50 mm width and 25mm thick are fixed with the help of wooden screws * Position of Top part of RHS & LHS cover Hinged on bottom side of MS Rectangular pipe with the help of 3 numbers of 50 mm (2 inch) long MS Hinges and metal screws * Latche (Nakucha) for Pavan Ankadis for Top part of RHS & LHS cover Latche (Nakucha) fixed at appropriate point of each end of a top part of front cover for Pavan Ankadis * Stopper for Top part of RHS & LHS cover provided 2 MS stoppers * Material and size of Bottom part of RHS & LHS cover 0.56 mm thick Galvenized Iron sheet of size of 1575mm x 325 mm * Type of supports provided for Bottom part of RHS & LHS cover 2 wooden supports of 1475 mm long having size of 50mm width and 25mm thick and 3 wooden supports of 225 mm long having size of 50 mm width * 6/15 and 25mm thick are fixed with the help of wooden screws Position of bottom part of RHS & LHS cover Hinged on top of border of a Pan (Thalu) with the help of 3 numbers of 50 mm (2 inch) long MS Hinges and wooden screws * Covering of bottom part of RHS & LHS cover 0.56. mm thick GI sheet with the help of wooden screws * Chain position of bottom part of RHS & LHS cover Free end of 2 chains are fixed at appropriate point on a cover during assembling of a hand lorry * Stopper for bottom part of RHS & LHS cover provided 2 MS stoppers * Lockable Operator side cover Material and size of Top part of operator side 0.56 mm thick Galvenized Iron sheet of size of 1575mm x 600 mm * Type of supports provided forTop part of operator side 2 wooden supports of 1475 mm long having size of 50mm width and 25mm thick and 3 wooden supports of 500mm long having size of 50 mm width and 25mm thick are fixed with the help of wooden screws * Position of top part of operator side Hinged on bottom side of MS Rectangular pipe with the help of three numbers of 50 mm (2 inch) long MS Hinges and metal screws * Latche (Nakucha) for Pavan Ankadis for Top part of operator side Latche (Nakucha) fixed at appropriate point of each end of a top part of front cover for Pavan Ankadis * Stopper for top part of operator side provided 2 MS stoppers * Material and size of Bottom part of operator side 0.56 mm thick Galvenized Iron sheet of size of 1575mm x 325 mm * Type of supports 2 wooden supports of * 7/15 provided for Bottom part of operator side 1475 mm long having size of 50mm width and 25mm thick and 3 wooden supports of 225 mm long having size of 50 mm width and 25mm thick are fixed with the help of wooden screws Position of Bottom part of operator side Hinged on top of border of a Pan (Thalu) with the help of 3 numbers of 50 mm (2 inch) long MS Hinges and wooden screws * Covering of Bottom part of operator side 0.56. mm thick GI sheet with the help of wooden screws * Chain position of Bottom part of operator side Free end of 2 chains are fixed at appropriate point on a cover during assembling of a hand lorry * Stopper for Bottom part of operator side provided 2 MS stoppers * Aldrop Kit and miscellaneous parameters Aldrop kit provided with hand lorry Yes * Material for Aldrop Kit Mild Steel * Position of Aldrop kit One set of Aldrop kit is fixed on right hand side of top & bottom part of said covers joint and another set of Aldrop kit is fixed on left hand side of top & bottom part of said covers joint for locking all top as well as bottom covers of a whole hand lorryduring assembling of a hand lorry * Write up text format and position on hand lorry Wright up in blue colour Government of Gujarat
RequiredGarib Kalyan Mela
RequiredYear as per buyer demand and text write on all front sides of vertical poles of a hand lorry after applying deep safron colour on vertical poles and on outside of all four GI * 8/15 covers of a hand lorry All sharp corner should be rounded provided Yes * Overall dimension of Thanda Garam Pina Alpahar Kit (Lx Wx H )in mm x mm x mm - * Over all weight ofThanda Garam Pina Alpahar Kit in kg 145 * Operating Manual & Instructions for use in English
RequiredHindi and Gujarati language to be provided 900000 * Reports & Certifications ISO Certification to manufacturer No ISO 9001 2015
RequiredNo ISO certification number & date
Requiredif no ISO certificate available
Requiredput N/A - * Availability of test report from govt NABL/ILAC accredited lab covering all parameters of the component of kit No Yes
RequiredNo Or higher Test report number
RequiredIncase test reports not available
Requiredput NA - * Test report date
RequiredIncase test reports not available
Requiredput NA - * Name of test lab
RequiredIncase test reports not available
Requiredput NA - * Address of test lab
RequiredIncase test reports not available
Requiredput NA - * Copies of all certifications and reports to be provided to buyer on demand at time of supplies NA
RequiredIncase test reports not available * * Specifications highlighted in bold are the Golden Parameters. * Bidders may note that In respect of non-golden Parameters
Requiredthe specifications 'Values' chosen by Buyer will generally be preferred over 'Bid requirement ( allowed Values) by the Buyer. Additional Specification Documents 9/15
