Loading…
Loading…
Tender Value
₹12.2 L
EMD Value
₹19,400
Closing Date
23 May 2026, 9:59 pmClosed
Directorate of Municipal Administration
jyoti1
changing of LT over head to UG cable and AB cable at dajibanpeth sali oni gouligalli mydar oni and G adda areas of ward no.65 of HBL DN.
DMA/2025-26/EL/WORK_INDENT55787
DMA/2025-26/EL/WORK_INDENT55787
Reserved
Electrical
Electronic Documents, First(One Cover)
DMA City Corporation Hubballi-Dharawada
8 documents required · 8 mandatory
₹500
₹19,400
15 May 2026
15 May 2026
20 May 2026
changing of LT over head to UG cable and AB cable at dajibanpeth sali oni gouligalli mydar oni and G adda areas of ward no.65 of HBL DN.
1.1kV Class 3 Phase Aerial Bunched Cable of size 3x95+1x16+1x70 Sqmm
Three Phase Distribution box for 6 Connections
Piercing connector suitable for 16 Sqmm - 95 Sqmm AB Cable - Service Connections
Eye Hook (Flat type) for fixing Clamps
Dead End Clamp/Anchor Clamp Assembly 25 to 95 Sq mm (excluding pole clamps and Eye hook)
Universal Hook, Bolts & nuts
T-connector KZ3 95
Cable Straight thru' joint kits suitable for 95 Sqmm
Cable Straight thru' joint kits suitable for 70 Sqmm
Pre-Insulated lugs-CPTAU for 95 Sqmm
Pre-Insulated lugs-CPTAU for 70 Sqmm
End cap for 50/70 Sqmm
Stringing of 11 kV grade Aerial Bunched 3 Core cable of XLPE insulation of size 3x95 Sqmm + 1x70 Sqmm with Insulated Messenger Wire
Fabricating supplying and erection of . ms long hot dip Galvanized Octagonal hot dip Pole with BSEN 10025 grade S 355 JO steel plate for shaft IS 2062 for base plate with door opening arrangements inc...
Supplying and fixing of Hot dip Galvanized M.S.Bracket suitable for out door luminaries and mounted on Octagonal pole using necessary bolts nuts etc. complete. 4.6.1) Single Arm Bracket with 1000 mm S...
Supplying and drawing Flexible Multicore Cable manufactured with electrolytic grade flexible copper with low conductor confirming to IS 8130 1984 and Virgin PVC insulation sheathed suitable for workin...
1.1Kv XLPE or Heat resistant PVC insulated PVC Extruded Inner sheath Armoured LT UG cable as per IS 1554 part 1 or IS 7098 Part 1 Armouring strip thickness and resistivity as per IS 3975 16s...
Earth work excavation for cable trench of 0.5 to 0.75 Mtr. Width and Depth upto 1 Mtr including trial pits depositing on bank upto a lead of 50 Mtr Supplying and Displaying necessary Danger Boards and...
PLB Pipe 40/33 mm ESCOMs SR 2023-24 Page No 366 Item No 66.05
Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve indicator ON orOFF energy cross 3 with Short circuit breaking ca...
Earth work excavation by manual means for drains,canals, waste weir, draft, approach channels, key trenches, foundation of bridges and such simillar works in all kinds of soils , as per drawing and te...
Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixe...
Supplying, Fitting and Placing TMT Fe 500 & above Reinforcement in Foundation / Substructure / Superstructure complete as per Drawing and Technical Specifications. Vol 3 - SR for Roads & Bridges 2023-...
Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...
Releasing & Refixing of Over Head Service Mains (Single Phase/Three Phase) for consumer installation and street lighting and similar work (While executing
reconductoring work
23.07) Lettering the RMU with enamel paint and also writing single line diagram of each panel, caution Board, Danger Board etc., including cost of Paint, Brush etc., Basic Rate:656
Releasing of RCC/PSCC Poles 9/8Mtr of 90% of the Pole erection charges.
Releasing of Conductor 7.04) Rabbit ACSR
Releasing of Conductor Weas
5.01) Releasing of 2 Pin cross arm with Insulator and Braces fixing
5.02) Releasing of 4 Pin cross arm with Insulator and Braces fixing
68.06 Cable Covering Tile 125x250x40 mm
32.04) 16 Sqmm, 2 Core, (9 GI Strips - 4 x 0.8 mm) UG Cable Supplying of 1.1 KV LT UG cable XLPE or Heat resistant PVC insulated, PVCextruded Inner sheath armoured UG LTcable as per IS-1554 (Part-1) o...
32.18) 240 Sqmm, 3.5 Core, (30 GI Strips - 4 x 0.8 mm) UG Cable Supplying of 1.1 KV LT UG cable XLPE or Heat resistant PVC insulated, PVCextruded Inner sheath armoured UG LTcable as per IS-1554 (Part-...
66.04 HDPE/PLB Pipe 50/42 mm Basic Rate 85014
51.01) Pipe Grounding Basic Rate:743
GI Grounding pipe, B - Class, 42 mm dia, 2.5 Mtr long,3.2 mm thick with bolt, nut, GI Strips and washer complete Minimum Weight of GI Pipe: 7.3 Kg
51.02) Pipe Grounding Basic Rate:676
Good Quality well burnt Charcoal for grounding
purposes packed in non returnable gunny bag of 30 Kg each
51.03) Pipe Grounding Basic Rate:310
Good Quality Salt for grounding purposes packed in 50 Kg gunny bag
1.6.1 Ordinary Soil Digging of Pit for providing GI Pipe type Earthing
30.01) 8 Way with Poreclain Rewireable Cutout and & 1 No of 630 Amps Load Break Switch with Copper Busbar as per IS-13947 Part-1&2(Refer Dwg No. BESCOM/GM/QS&S/41 Dtd 24.11.2018)
9.04) above 8 Ways Erection of LT Feeder piller box including necessary civil works like soil excavation & concreting etc. complete
34.12 240 Sqmm, 3.5/4 Core Straight Through Jointing Kit Straight Through Jointing Kit Suitable for
1.1 kV Class LTUG Cable as per IS-13573
35.04 3.5 x 225/240/300 Sqmm Epoxy Terminating Kit (Pothead) suitable for 1.1 kV, LTUG Cable
22.15 120 to 240 Sqmm Heat shrinkable Type Terminations
60.12) 240 Sqmm Aluminium End Terminal (Lug
64.02) 16 Sqmm Lug
Aluminium End Terminal (Lug)
68.08) Route & Joint indicating slab with MS Anchor rod
63.01) 25 mm Brass Cable Gland Basic Rate:79
21.05) 2.5 to 25 Sqmm Labour Charges Labour charges for laying of 1.1 KV class UG cable in existing trench GI pipe / stoneware pipe / on wall / on pole as required
21.07) 120 to 240 Sqmm Labour Charges Labour charges for laying of 1.1 KV class UG cable in existing trench GI pipe / stoneware pipe / on wall / on pole as required. 31.05 ) 2.5 to 25 Sqmm
1.1 kV Class HR (Heat Resistant) PVC Insulated & Sheathed Aluminium Single Core Lead wires as per IS-694: 2010 374) 48.04)
PVC Wire - 10 SqmmWeight per 100 Mtr Coil: 5.3 Kg
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
55787.doc
Tender Document • 1.14 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .