Construction of D.T.I.C. Office Building, E-Type Quarter Chowkidar Quarter including Internal Electrification, Boundary wall, Approach Road, Hume Pipe Culvert and Drilling of Tube well work at Rajgarh District Rajgarh (M.P.)

Amount

Providing and fixing of Chair :- Over all dimensions- W 642 mm x D 705mm x H 1182 to 1302 mm. Seat size - 502 mm x 5002 mm ( Minor side ) Back size -502 mm x 752 mm ( outer side ) - Seat & back shall be made of 12 mm + 2 mm thick hot pressed ply. Seat fitted with 50 mm foam density with topping of 35 mm foam & soft foam making double layer, The Back is to be designed with contoured lumber support for extra comfort, Back of the chain shall be covered with the leather & soft foam, Handle of the chair having width 70 mm approx in one piece, The chair shall be front type syncro tilt mechanism with 360 degree revolving, The Pedestal shall be injection moulded in black 32% glass filled nylon with gas lift mechanism width 700m. steel inserted with twin castor wheels, The seat and back shall be covered with superior quality leather. Design of above as per directions of Engineer-in-charge. Make (HERMANMILLER/BTF/ WIPRO/ CSPL ) ) or equivalent.

Providing and fixing of Staff Chair - Overall dimension : D-652xW-582xH-880 to 982 mm Seat height : 472 to 572 mm, Seat and back shall be made of 12+ 1 mm thick hot pressed ply with T- nuts for rigid fastener. Seat cushion 50 mm thick 40 density and back 40 mm thick density PU moulded foam shall fitted, upholstery of approved quality shall be used, Seat and back shall be covered with PP covers,Telescopic ABS cover over steel column, Lockable centre tilt mechanism, Single piece die cast PP armrest to be fitted, Base made of reinforced five pronged having twin wheel castors,Gas lift mechanism for height adjustment. Design of above as per directions of Engineer-in-charge. Make (HERMANMILLER/BTF/ WIPRO/ CSPL ) ) or equivalent.

Providing and fixing of Conference room chairs - Overall dimensions W615 xD684 x H896 mm ,seat height 466 mm , Seat and back shall be made of 12 mm + 1 mm thick hot pressed plywood and upholstered with moulded PU foam of 50 mm thick and 40 density with approved quallity fabric , Tubular frame cantilever type made of 2.55+ 0.04 cm + 0.2 + 0.015 cm thick MS ERW tube,The arm rest shall be adjustable with cushion on the arm rest top. Design of above as per directions of Engineer-in-charge. Make (HERMANMILLER/BTF/ WIPRO/ CSPL ) ) or equivalent.

Providing and fixing of Centre/ Side Table Overall size 1200x602x452 mm , Legs shall made out of 76x 76 mm teakwood section, Top rail shall be made of 70x22 mm , Top shall be made of 18 mm veneer faced MDF board , Teak wood beading of 18 mm shall be fitted as per approval. , Polish- PU polish shall be done. , Design of above as per directions of Engineer-in-charge.

Providing and fixing of Visitor Chair - Overall dimensions W615 x D682 x H896 mm ,seat height 466 mm , Seat and back shall be made of 12 mm + 1 mm thick hot pressed plywood and upholstered with moulded PU foam of 50 mm thick and 40 density with approved quallity fabric,Tubular frame cantilever type made of 2.55+ 0.04 cm + 0.2 + 0.015 cm thick MS ERW tube. , The arm rest shall be adjustable with cushion on the arm rest top. Design of above as per directions of Engineer-in-charge. Make (HERMANMILLER/BTF/ WIPRO/ CSPL ) or equivalent.

Providing and fixing of Table Size : W2704 x D1054 x H754 mm , The table shall be made of 25 mm MDF board with 0.6 mm thick laminate post formed with edge effect of 36 mm . The angular section shall be membrane coated or PU painted. , The main table shall have under structure having verticals made of 25 mm thick particle board post formed legs with modesty made of 25 mm thick, particle board having decorative laminate on both sides,The table shall have a drawer unit of size 462 x 577 x 552 mm having two drawers and one filling . The drawer unit shall be made of 18 mm thick pre-laminated particle board with post formed facia , Side Unit- The overall size of side unit shall be 182 x 552 x 752 mm Top made of 25 mm thick MDF Board with 0.6 mm laminate post formed on it. The under structure shall be made of 25 mm thick particle board having decorative laminate on both sides. The unit shall have openable shutter storage and 3 drawers units with facia duly post formed. Table top and side unit shall have glass top of 12 mm thickness duly beveled. Levellers to be provided at bottom. Design of above as per directions of Engineer-in-charge.

Providing and fixing of Conference Table , The Conference table shall be made of 25 mm MDF board and 0.6 mm thick laminate duly post formed 18 and 25 MM thick pre - laminate particle board or post formed particle board. , The top shall be made of 25 mm MDF board and 0.6 mm thick laminate duly post formed edge effect of 36 mm,The vertical legs shall be made of 25 mm thick particle board and 0.6 mm thick laminate duly post formed, Apron shall be made of 18 mm thick BSL particle board of 500 mm width. , 12 mm thick frosted glass shall be provided at centre or duct for arrangement of mic and cable with PU painted top cover, The Top of half round unit/ quarter unit / oval end shall be membrance coated or polyurethane painted. Design of above as per directions of Engineer-in-charge.Two seater main unit - 1352x602x752 mm

Providing and fixing of Sofa chairs Three seat sofa Overll size : i) Single seater- W1000 mm x D882 mm xH-782 mm. ii) Two seater - W 1376 mm x D882 mm xH-782 mm. iii) Three seater - W 2062 mm x D882 mm xH-782 mm. , Frame material - Tropical seasoned hard wood, particle ply board, seat shall be made of 100 mm thick 40 density PU foam with topping of super soft foam. , Back foam shall be made of 60 mm thick 40 density PU foam with topping of super soft foam, Fabric of approved quality / colur shall be used for upholstery work. , Belt Matreial : Nylon , 2" , 3", Boanding solution : Boltic Glue , Stitching of Nylon, Polyester - coats. Design of above as per directions of Engineer-in-charge.

Providing and fixing of Steel Storage Cabinet , Overll Dimensoins : H 1980 x W916 x D486 mm , Material : Prime quality MS CRCA sheets 1.1 mm for front , side and shelves and 0.9 mm for back approx, Number of shelves : Four forming five compartments. Suiltable arrangement shall be procided for adjusting the shelves as per requirement, Locking Mechanism : Three way bolting device with six levers superior quality standard made of lock with duplicate keys., pedestal: Made of 1 mm MS CRCA sheet. Height 125 mm , Hinges : Double folded type hinges made of MS CRCA sheet thickness 1.8 mm to 2.0 mm. Three hinges for each doro elaf. , Finish : Almirah shall be powder coated after seven tanks anti corrosion pretreatment, All the accessories shall be superior qualty and standard make . Design of above as per directions of Engineer-in-charge.

Providing and fixing of Staff Table 1.50x 0.75x0.75 MM , The table shall be made of 25 mm MDF board with 0.6 mm thick laminate post formed with edge effect of 36 mm . The angular section shall be membrane coated or PU painted. , The main table shall have under structure having verticals made of 25 mm thick particle board post formed legs with modesty made of 25 mm thick, particle board having decorative laminate on both sides,The table shall have a drawer unit of size 462 x 577 x 552 mm having two drawers and one filling . The drawer unit shall be made of 18 mm thick pre-laminated particle board with post formed facia , Side Unit- The overall size of side unit shall be 182 x 552 x 752 mm Top made of 25 mm thick MDF Board with 0.6 mm laminate post formed on it. The under structure shall be made of 25 mm thick particle board having decorative laminate on both sides. The unit shall have openable shutter storage and 3 drawers units with facia duly post formed. Table top and side unit shall have glass top of 12 mm thickness duly beveled. Levellers to be provided at bottom. Design of above as per directions of Engineer-in-charge. Note:- The Bidder Shall quote his own rates for item rates.(item 01 to 10)

Bidder Name

Amount

GANGADHAR SHARMA AND SONS(GSTN-23AACFG8951C1ZO)

BRIJESH GOYAL(GSTN-23AJKPG3072D1ZO)

SACHIN MORYA CONSTRUCTION(GSTN-23BQQPM0829N1ZD)

BRIJESH GOYAL

SACHIN MORYA CONSTRUCTION

GANGADHAR SHARMA AND SONS

BRIJESH GOYAL