PROVN OF BATTERY CHARGING ROOM FOR 40 X BATTERY POSTS AT ENTITY B 61 WEU ARMY CAMP HIRANKUDNA AND PROVN OF RATION STORE NEAR BLDG NO P58A ORS MESS AT 136 I WKSP EME SIGNAL GROUP AT ANAND PARBAT MILITARY STATION AND ADDN ALTN TO BLDG NO P01 OF FOL

Amount

B/R PORTION:- Surface excavation n. exc 30 cm deep and averaging 15 cm deep and getting in soft /loose soil

Excavating in trenches, not exceeding 1.5m wide and not exceeding 1.5m in depth etc not exceeding 10 Sqm on plan for shafts, cesspits, manholes, pier holes, foundation etc and getting out in any type of soil complete all as specified & directed.

Returning filling in and including spreading levelling, watering and well ramming in layers n exc 25 cm thick complete.

M&L for Hardcore of gauge n-exc 63mm of broken bricks ,deposited ,spread and levelled in layers n-exc 15 cm thick watered and rammed to a true surface complete.

M&L for Cement concrete 1:4:8 type D-2 using 40mm graded stone aggregate in foundations, filling and mass concrete all as specified & directed.

Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified.

M&L RCC Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete uing type M-25(Design mix) (using 20mm graded) stone aggregate complete all as specified.

Formwork to sides of pillars, posts, struts, piers, columns and stanchions complete all as specified.

M&L RCC in Columns, pillars, piers, posts and struts uing type M-25(Design mix) (using 20mm graded) stone aggregate complete all as specified.

Form work to sides of concrete roof beams, lintels cantilevers etc including supports.

M&L RCC in beams, Cantilivers, bressummers, lintels over 1.5 mtr span uing type M-25(Design mix) (using 20mm graded) stone aggregate

Form work to soffits of suspended slab such a roof slab etc not exc 200 mm thick complete all as specified.

Form work to edges of roof slab, RCC bands etc n.exc 200mm complete all as specified.

M&L RCC slab supported on walls , beams & colmns etc as in roof & the like using M-25(Design mix) using 20mm stone aggregate complete all as specified.

M&L Mild steel TMT bars 10mm dia & over,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends & binding with & including mild steel wire (annealed) not less than 0.9mmdia or securing with clips quality all as specified and directed.

Ditto but 6 to 10mm dia bars as in stirrups spacers and binders complete all as specified.

M&L for brick work with sub class'B' bricks straight or curved on plan exc 6 mtr mean radius built in CM 1:6 complete all as specified and as directed

M&L Rendering15 mm thick Ready mix plaster in CM (1 : 6) as in backing coat for fixing wall tiles complete all as specified and as directed.

M&L for 75 mm thick in Plain cement concrete type C2 ( 1:3:6) (using 40 mm graded aggregate ) as in plinth protection laid in alternate bays (not exceeding 2 Sqm each) finished even and smooth at top without using extra cement and providing joints throughout the thickness of plinth protection, filled with mastic filling comprising one part of bitumen 85/25 grade and three parts of sand by weight all as directed at site. Complete all as specified and as directed.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification complete all as specified.

S&F Factory made solid PVC Moulded shutter 28-30mm thick styles with 2,4 or 6 raised panels design with 2 mm thick moulded prelam PVC sheet on the front face and 2 mm thick prelam PVC sheet on the back face with particle board core. Complete all as specified and as directed.

S&F100 mm Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 → complete all as specified and as directed.

S&F Aluminium alloy, anodised, sliding door bolt 200mm long, with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts & sliding bolts of extruded sections or cast aluminium alloy complete.

S&F Aluminium anodised barrel Tower Bolts of extruded section 150 mm long fixed with screws. complete all as specified and as directed.

S&F Aluminium anodised handle of extruded section 100 mm long fixed with screws. complete all as specified and as directed.

S&F for Stainless steel wire mesh 0.36 mm dia fixed with tinned tacks of stainless steel wire and avg width of aparture 1.4mm complete in repair complete all as specified and as directed.

M&L for 15mm thick Ready Mix Plaster CM (1:4) on brick work or concrete surfaces using WPC Compound to be finished even and smooth, complete all as specified and directed. ( WPC paid separatly)

M&L for 15mm thick Ready Mix Plaster CM (1:6) on brick work or concrete surfaces to be finished even and smooth, complete all as specified and directed.

M&L Preparing new plastered surfaces of walls and applying two coats of white wash complete all as specified

Supply only liquid water proofing compound complete all as specified and as directed.

Cutting chases pinning in making good to facing where required for concealed water tubing and making good cutting not exc 10cm girth in brick walls complete.

M&L for 15mm bore steel tubes “medium grade” galvanised with all fitting and fixed complete in walls, ceilings or floors complete all as specified.

M&L for 20mm bore steel tubes “medium grade” galvanised with all fitting and fixed complete in walls, ceilings or floors complete all as specified.

S&F Bib taps, long body, fancy type, chromium plated with crutch or butterfly handle screwed down for iron pipe or for brass ferrule and fixed for bore of pipe 15 mm, all as specified.

S&F 15mm dia Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed (concealed type) complete all as specified and as directed.

S&F Brass chromium plated shower rose 125mm size with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and as directed.

S&F for Gun metal gate valve with iron wheel head ,screwed both ends for iron pipe and fixed 20 mm bore complete all as specified and as directed.

S&F Tubular Towel rail 20mm dia, D type, 60cm long between flanges of brass chromium plated fixed with and including chromium plated brass screws and wooden / plastic cleats all as specified.

S&F sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long complete all as specified and directed

S&F PVC (SWR) floor trap, plain with grating including jointing with solvent cement, 75mm diameter of outlet, all as specified.

S&F Pillar taps, fancy type cast copper alloy, with capstan heads, chromium plated, for 15mm bore dia screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified.

Supply only PVC (Plastic polymer Cistern) valve less, Symphonic action type, flushing cistern of capacity 10 liters, low level, white with inlet, ball valve, manually operated with one PVC ball valve horizontal plunger type including provision of 32mm PVC flush pipe of required length and making connections complete all as specified.

S&F Vitreous china squalting pan of Orrisa pattern long pan size 580mm white with 'P' or 'S' trap front or back inlet and fost rest any pattern including connection to trap and to flushing pipe etc complete including lime concrete bedding and making good to floor complete all as specified.

S&F vitreous china urinal half stall type white including waste pipe and coupling (Excluding flushing cistern , flush pipe and waste pipe) complete all as specified and as directed.

S&F PVC connections 15 mm size with PTMT nuts of length 600 mm long complete all as specified and as directed.

S&F Rotational moulded polyethene Water Storage Tanks 1000 ltrs capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I etc complete all as specified and as directed.

S&F ball brass valve high pressure with polythene float and fly nut complete screwed for Iron pipe 20mm bore complete all as specified and as directed.

S&F 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified.

S&F 75mm bore PVC (SWR) bends any radius complete all as specified and as directed.

S&F 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls , complete all as specified.

S&F 110mm PVC (SWR) junction single, (Single T) equal or unequal section complete all as specified and directed.

S&F 110mm bore PVC(SWR) pipe vent cowl complete all as specified.

M&L 150 mm bore salt glazed stoneware drain pipe laid in trenches and jointed all as specified and directed

M & L cement concrete aggregate bed to drain pipe 100 mm dia including packing under and hunching against the sides of pipe after they are laid and tested in cement concrete 1:4:8 type D 2 using 40mm graded stone aggregate complete all as specified and directed.

Providing precast cement concrete in window or door cills, lintels, bressumers, steps,quoin blocks (for use with masonry), string courses, copings kneelers, apex stones, pier caps, columns, posts, boundary pillars, weatherings, throat- ing etc. and setting in CM 1:4complete with joints to match etc using type B1, 1:2:4 (using 20mm graded) stone aggregate complete all as specifed and directed

S&F Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness with grey cement and no pigment, M-35 Grade complete all as specified and directed.

M&L for preparation/roughning of the plastered/unplastered roof surfaces and fix the APP polymeric water proofing membarance of minimum 3mm thickness & weighing not less than 3.6kg/sqm of as approved by GE, black finished reinforced with non-woven poleyster matt. With a thermofusible finish laid over 85/25 grade bitumen @ 1.2Kg/Sqm over bitumenous primer at the rate of 0.40 kg/sqm, torching overlaps with a propane or a butane gas torch with a overlap of 100 mm at the sides and 150 mm at the ends and sealing applying a consistent coat of bituminous paint over APP surface all as per manufacturers instructions over and including screed bedding 15mm thick on brick/roof surfaces in cement mortar 1:4, mixed with water proofing compound and SBR of FOSROC as per manufactrurs instruction complete all as directed and specified.

S&F steel ventilator with top hung shutter including hinges, steel peg stay, complete all as specified and directed.

S&F 4 mm thick sheet glass ordinary quality and glazing with oil putty in squares area not exceeding 0.5 Sqm in each pane, complete all as specified and directed.

S&F cast iron 75mm nahani trap with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4), complete all as specified and directed.

S & F in 100mm dia of PTMT (minimum weight 25 gms) grating round shape fixed over floor trap with coloured cement all as directed

M&L Formwork to chullah hoods, chajjas, troughs and similar items including edges for rough finished surfaces complete all as specified and as directed.

M&L for RCC(design mix) M-25 in Chajjas complete all as specified and as directed.

M&L rendering with Ready Mix mortar 10 mm thick in CM 1:4 to soffits of slab finished even and smooth without using extra cement complete all as specified and as directed.

M&L for preparation of new plastered surfaces any description and apply two coats of cement base paint over a coat of alkali resistant primer on plastered surface area all as specified and directed.

M&L for damp proof course 40mm thick using PCC 1:2:4 type( B-O) using 12.5mm graded stone aggregate over applying evenly a coat of blown type bitumen at the rate of 1.50 kg per square metre and blinding with clean dry sand @ 0.05 cum. per sqm complete all as specified.

M&L for sand filling 25mm thick under floors or in foundations including watering as required all as specified and directed by Engr-In-Charge.

M&L for Machine cut kota stone slab flooring 20-25mm thick over 20 mm thick cement screed bed CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

M&L for Machine cut Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with ditto as per item 1776 slab in skirting 20-25mm thick over 10 mm thick cement plaster 1:4 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

S&F Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and as directed.

M&L Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410-0 or FE 310-0 complete all as specified and directed.

S&F Rolled mild steel Framed work ~Fe-410 - W (Gde-E-250)quailty-A as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, Doors etc. to be prepared for hanging or sliding with & including either hooks & hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails & guides) & hanging; also fastening & fixing complete all as specifed and directed.

S&F40 mm thick 2nd class hardwood plain framed panelled shutters (two panel ) with lock rail and panels of 9mm CWR plywood. The size of rail and stile as per IS 1003 (Qart I), klin seasoned and chemically pressure treated complete all as specified and directed.

M & L for appying two coats of synthetic enamel paint over a coat of red oxide primer on new steel surface including preparation of surfaces complete all as specified and directed.

M&L two coats of synthetic enamel paint over one coat of primer on new wooden surfaces including preparation of surfaces exc. 10 cm width or girth all as specified.

S&F butt hinges extruded aluminium alloy with galvanised mild steel hinge pin anodised and fixed size 100 mm complete all as specified and directed.

Removing excavatged material(Soil) n. exc. 250m and n exc.500 mtr deposting where directed at a level n.exc. 1.5m above the standing point complete all as specified and as directed.

M&L for excavating in post holes in soft/loose soil (or similar holes) each n exc 0.5 cu. M, getting out, returning, filling in and raming earth or broken rubble midxed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n exc 50m and making good surface soft/loose soil. complete all as specified and as directed.

M&L steel work of tubular pipes (medium weight) including embeding in concrete and screwing etc. posts and struts in fencing including cutting tops to shape as directed, drilling holes, motching for wire etc. flat iron fillets including all necessary drilling olting or riveting etc. and similar work conforming to Fe-290 Gde E-165.compplete all as specified and directed.

S&F beam and channel sections with flange plates caps, bases splices, angle brackets, cleats and other connections and conforming to Fe-410-W (gde-E-250) quality A complete all as specified and directed.

S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550MPa as in roof covering/cladding to wall, fixed with self tapping screws as specified.

M&L for 5mm thick Ready mix Plaster in CM (1:4) on ceiling fair/un-even surfaces of brick work or concrete surfaces to be finished even and smooth, complete all as specified and directed.

M&L three coats of white wash on newly plastered surfaces as in ceiling including preparation, complete all as specified

M&L 40 mm thick plain cement concrete 1:2:4 type B-1 ( using 12.5 mm graded stone aggregate) as in floors finished even and smooth using extra cement all as specified.

M&L for Non Skid coloured ceramic tiles 7 to 8mm thick (Square/rectangular) area of each tile exc 0.11 sqm but n. exc. 0.18 sqm, as in floors set and jointed in neat cement slurry and pointed in coloured cement over and including 15mm thick screed/bedding layer with in CM (1:6), complete all as specified and directed.

M&L Glazed ceramic digital coloured tiles of size 450x350x7mm thick on vertical surfaces such as skilting/dado over and including 10mm thick bedding layer plaster in CM (1:4) , complete all as specified and directed.

S&F MS bars as in window guard bars welded to steel window frame or fixed to wooden frame all as specified and directed.

M&L for cement concrete (1:2:4) type B-0 using 12.5mm graded stone aggregate as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses,lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones,bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed complete all as specified and directed

M&L Treating the bottom and sides of excavation at the rate of 5 litres of emulsion per square metre of surface area complete all as specified and directed.

M&L Treating the backfill in contact with foundation at the rate of 7.5 litres of emulsion per square metre of vertical surface (area of the sub structure in contact with backfill to bemeasured) complete all as specified and directed.

M&L Treating the top surface of filled earth at the rate of 5 litres of emulsion per square metre of surface complete all as specified and directed.

M&L Treating the soil under plinth protection at the rate of 5 liters of emulsion per square metre of surface area complete all as specified and directed.

M&L Treating the soil along with external perimeter of building at the rate of 2.25 litres of emulsion per metre of the perimeter wall complete all as specified and directed.

S&F for 35 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

S & F for 35mm thick, second class hard wood, glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc edges of framing plain, chamfered or rounded , fitted with cut and mitered beads for securing wire cloth etc,sizes of members of shutters as specified in SSR Part I, Section 8,clause 8.24(a) complete all as specified and directed.

S&F for 200mm long Mild steel barrel tower bolts, stove enamelled black, with bright bolt and fixed complete all as specified.

S&F for 150mm size Mild steel pressed handles, oval type, stove enamelled black complete all as specified and directed.

S& F 250 mm longMild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and directed.

Taking down cement or cement lime plaster on brick or stone walls etc including raking out joints, hacking for key, scrubing down with water etc complete all as specified and directed.

Cutting out bricks, forming toothing for,and bonding new in CM 1:6 into old work including value of new materials entering old walls and jointing and pointing (measured on vertical face in contact with old wall only)

Demolition of Cement Concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level), complete all as specified and directed.

Demolition of brick/stone masonry built in CM. all as specified.

M/L preparation of old steel surfaces of any description over 10cm width or girth and apply one coats of synthetic enamel paint ,complete all as specified and directed.

M&L for preparation of old decorated surfaces of any description and applying two coats of cement base paint on external wall surface complete all as specified and directed.

M/L preparation of old wooden surfaces of any description over 10cm width or girth and apply one coats of synthetic enamel paint all as directed and specified.

M&L for 40mm thick PCC 1:2:4, type B0 damp proof course to horizontal or vertical surfaces including necessary formwork , complete all as specified and directed.

S & F for Vitrified ceramic tiles Dark shade 10mm thick (square/rectangular) area of each tile not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laying floor finishes and including15mm thick screed/bedding layer in CM (1:6) complete all as specified and directed.

S & F for Vitrified ceramic tiles Dark shade 10mm thick (square/rectangular) area of each tile not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laying vertical surface as in dados/ skirting and including over 10 mm thick plaster in CM 1:4 , all as specified and directed.

M&L prepartion of newly plastered surface of wall and applying two coats of oil bound distemper over a coat of primer and 3mm th of wall care putty of make birla/JK, all as specfied and directed.

Supply, and fixing 30 mm thick factory made Polyvinyl Chloride (PVC) door shutter made of styles and rails of a uPVC hollow section of size 60x30 mm and wall thickness 2 mm (± 0.2 mm), with inbuilt decorative moulding edging on one side. The styles and rails mitred and jointed at the corners by means of M.S. galvanised/ plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws. The styles of the shutter reinforced by inserting galvanised M.S. tube of size 25x20 mm and 1 mm (± 0.1 mm) wall thickenss. The lock rail made up of 'H' section, a uPVC hollow section of size 100x30 mm and 2 mm ( + 0.2 mm) wall thickness fixed to the shutter styles by means of plastic/ galvanised M.S. 'U' cleats. The shutter frame filled with a uPVC multichambered single panel of size not less than 620 mm, having over all thickness of 20 mm and 1 mm (± 0.1 mm) wall thickness. The panels filled vertically and tie bar at two places by insering horizontally 6 mm galvanised M.S. rod and fastened with nuts and washers, complete as specified by the manufacturer and as per directions of Engineer in-charge.

Supply and fixing of aluminium door powder coated of extrusion aluminium section, consisting of door frame vertical and horizontal members of size 100mmx45mmx2.5mm thick with door shutter style 85mm x 45mm x2.50mm thick, Top, middle and bottom rial of size 101.60mmx44.50 and meeting style 47.50mmx44.50mm thick with 5.50mm thick tinted sheet glass of modi guard/Atul or 6mm this aluminium board with aluminium bedding and rubber gasket/beading including fixing of hydraulic floor spring one in single leaf or two nos in double leaf door of Make Kelvin/Evershine. One mortice lock for aluminium door (each) and two aluminium tower bolts for each door with suitable door handle ornament type with hinges 100 mm long complete . Fixed with rawl plug including rectification of floor/wall to match the existing surfaces all as specified and as directed by Engineer-in-Charge at site. Note: 5.5mm thick tinted glass or 12mm thick prelaminated particle board will be measured and paid for separetetly under repective items.

Supply and fix aluminum powder coated three track sliding window with frame and two no's glazed shutter and one no's gauzed shutter/Ventilator shutters side hung type with or without sash bar, locking rails, locking arrangements with frames including necessary joinery, cleats, glazing clips, rubber packing, anodized aluminum snap beading, screws, suitable handle, tower bolt, hinges and glazing of 5.5mm thick size. Size of top rail, bottom rail shall be 44.45mmx44.45mm and size of frame shall be 65mmx44.45mm and thickness of aluminum 2.50mm thick complete all as specified in MES SSR-1991, Part-I complete all as specified and directed. Note:5.5mm thick tinted glass or wire mesh will be measured and paid for separetetly under repective items.

S&F glazing of tinted glass 5.5mm thick in aluminium door window shutters and partitions etc with PVC/neoprene gasket etc Complete all as per specified and directed by Engr-in-Charge.

S&F in repairs vitreous china wash down water closet pan (padestal pattern) white colour (including flushing cistern and flush pipe) closed pattern including black seat cover all as specified and directed

S & F in repairs CP hygienic spray (2in 1 facucet with 1.5M long tube) complete all as specified and directed.complete all as specified and directed.

S&F PVC connection 15mm dia 450mm long with brass coupling/unions on both ends suitable for flushing cistern and WHB, complete all as specified and directed.

S & F 15mm Bib taps fancy type, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all specified and directed.

S&F angle valve cast copper alloy C.P 15mm bore screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipes or for union all as directed and specified.

S&F vitreous china wash hand basin with stand white flat back of size 550x400mm including cutting for and pinning in ends of brackets, PVC flexible waste pipe 32mm dia, brass chromium plated waste fittings etc complete all as directed and spcified.

S&F PVC water tanks 500 ltr cap rotational moulded polyethylene water storage tanks (cylinderical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I.

S&F CP soap dish fixed to wall with suitable rawl plug all as specified and directed in Engr in Charge

S& F 20mm dia Ball valves high pressure of PTMT with epoxy oatedAluminium rod & high density plastic ball screwed for iron pipeand fixed. (Minimumweight 15mm-142gms/2 0 m m - 2 1 0 g m s . /25mm-455gms/ 40mm- 690 gms) ®

Earth filling under floor spreading and leveling in layers n.exc. 25cm thick including well ramming including watering as required all as specified and as directed.

M&L for concrete bed to 150mm dia drain pipes including packing under and haunching against the sides of pipes after they are laid and tested in cement concrete (1:4:8) type D-2 using 40mm graded stone aggregate including necessary shuttering and supports to concrete and for laying beds to falls complete all as specified and directed for the following bore of pipes :-

M&L for providing precast reinforcement cement concrete (1:2:4) type B-1 using 20mm graded aggregate in man holes covers slabs all as specified.

Cutting into existing manholes for connecting new drains making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 or 3/4 section ) in cement concrete 1:2:4 type B1 using 20 mm graded stone aggregate finished smooth and reforming benching as required for 150 mm dia pipes omplete all as specified and as directed.

E/M PORTION:- M&L for point wiring concealed type with 1.5 Sq.mm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed FRLS copper conductor cable with and including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable and connected to common earth and earth dolly with suitable copper lugs and drawing into and including rigid non-metallic PVC conduit of 20mm dia or higher, medium grade complete with and including all PVC conduit accessories concealed into wall incl sunk zinc coated pressed steel terminal box of 1.60mm thick with 3mm thick plastic laminated sheet top cover, brass screws, cup washers etc and making good to the disturbed surfaces to match the existing complete all as specified and directed for the following :-

One light point controlled by one, one way switch 06 Amps

One ceiling/ exhaust fan point controlled by one, one way switch 06 Amps

One 3 pin, 06 Amps socket outlet point on same board controlled by one, one way 06 Amps switch

One 3 pin, 06 Amps socket outlet point on independent board controlled by one, one way 06 Amps switch

All as per above but with 2.5 Sqmm nominal cross sectional area copper conductor cable for one 16 Amps socket outlet point on independent board with 2.5 Sqmm nominal cross sectional area copper conductor cable as continuous earth wire complete all as specified and as directed.

S&F Switch piano flush type 5/6 Amps single pole one way 230 Volts

S&F Switch piano flush type 15/16 A single pole one way 230 Volts

S&F Socket Outlet 2 in 1, 3 pin 5 Amps flush type, 230 Volt

S&F Socket Outlet 2 in 1, 3/6 pin 5 and 15 Amp flush type, 230 Volts

S&F of ceiling rose, 6 Amp, 3 terminal incl connection complete all as specified and as directed.

S&F electronic fan step regulator fiush type 120 watt, 230 Volt, 2 module incl connection complete all as specified and as directed.

S&F Sheet metal enclosure DB 4 way, single pole and neutral with 200 Amps rated bus bar, 230 volts, glazed, double door type, IP-43, including connecting all connections of wire to MCBs with proper lugs & arrangements complete all as specified and directed

All as per above but 8 way

S&F MCB DP 40 Amp, 240 Volts, AC of breaking capacity 10 KA, 'B' curve complete

S&F MCB SP 240 Volts, AC 6 to 32 Amps, breaking capacity 10 KA, 'B' curve complete

S&F wall mounted LED batten with polycarbonate housing and initigrated electronic drive,18/20 Watt, 6500 K, fixture 4 feet provided for efficient heat dissipation with policorbonate diffuser and integrated electronic driver and all accessories pre-wired including connecting up with twin core flexible copper conductor cable of suitable size complete all as specified and as directed.

S&F surface and wall mounted LED batten 10 watt 2 feet long extruded aluminium housing provided for efficient heat dessipation with polycarbonate diffusser and integrated electronic drive, pre-wired including connecting up with twin core flat flexible copper conductor cable of suitable size complete all as specified and directed

S&F energy efficient wall mounted LED bulk head luminaire of polycarbonate housing and enclosed with acrylic diffuser 10 watt , 230 volt, AC, IP-65 protection complete all as specified and as directed.

S&F bldg security light LED luminaire 25 watt with low voltage with pressure die cast aluminium housing with heat resistant toughened glass & IP 65 protection and 25 watt with suitable size GI pipe bracket and clamps incl connection complete all as specified and directed

S&F ceiling fan 1400 mm sweep, 230 Volt, AC, energy Saving type, 5 star rating in white colour, complete with all accessories, nuts bolts, clamps etc and connecting up with provn of copper flexible cable of size 1.5 Sqmm from ceiling rose to fan complete all as specified & directed

S&F exhaust fan, steel body, AC, single phase, 230 V of size 300 mm sweep with blades and frame and luovers incl connection and making hole for fixing of exhaust fan complete all as directed

M&L for earthing complete with galvanised mild steel earth plate electrode 60cmx60cmx6mm thick buried vertically in ground (earth pit not less than 2.25meter deep below ground level) with top edge of the plate not less than 1.5meter below normal ground level steel earth plate connected with GI wire 04mm dia by means of lug, bolts, nuts, check nuts, washers of galvanised iron or steel GI protection pipe 15mm bore light grade all as shown in elect plate No 3 on serial page No 497 of SSR part I - 2009 and connecting to main switch board / Main DB’s including excavation, earth work, salt and charcoal dust mixed and packed 150mm thick around GI earth plate, GI pipe medium grade 20mm nominal bore watering pipe GI sheet funnel wire mesh, concrete pit, RCC cover 40mm thick in PCC 1:2:4 type B1 duly reinforced with MS Bars 6mm dia at the rate of 75mm center to center both way with 12mm dia lifting handle and pit / chamber in PCC 1:3:6 type C1, Angle iron 40mmx40mmx3mm frame for pit cover including testing on completion complete all as specified & directed

M&L for earth continuity conductor or main earthing lead to wall on batten or recess or chases or buried in ground or drawn in conduit/ pipe or fixed to DBs or nay other indicated situation for loop earthing etc 4 mm dia galvanised iron or steel wire all as specified and directed

Supply and laying or fixing or passing through pipe 1100V grade heavy duty cable with PVC insulated aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed 10 sqmm 2 core nominal cross section in service connection complete

M&L for sand cushioning with a layer of fine sand 8 cm thick before laying the cable and 15 cm after laying the cable in trenches to cover under ground cable all as directed

M&L for one layer of bricks class 'B' laid flat across the cable for protection cover on the top of the sand cushioning for LT cable protection complete

Removing excavated material /soil from site to a distance not exc 50mtr away and depositing where directed and level not exc 1.5mtr from the starting point all as directed.

M&L for GI pipe 40 mm, light grade with clamps made out of MS flat 40 x 5 mm thick, fix on pole/wall for LT cable complete all as directed

M & L for making hole 80 mm dia below the road in by drilling machine or hand drill without damaging road for inserting pipe 40 mm dia for drawing of cable complete all as directed

M&L for cutting of existing GI pipe line 25 to 50 mm dia including threading for inserting tee / nipples etc for new pipe connection as required complete

Taking down carefully copper / aluminium point wiring (light / fan socket or power) complete including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc for taking credit including making good the disturbed surfaces to match with the existing all as specified and directed

M&L for point wiring with 1.5 Sqmm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed FRLS copper conductor cable with and including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable and connected to common earth and earth dolly with suitable copper lugs and drawing into and including rigid non-metallic PVC conduit of 20mm dia or higher, medium grade complete with and including all PVC conduit accessories concealed into wall by cutting of chases in wall and provn/ replacement of modular metal flush box, modular white cover plate with frame, blanking plate etc suitable for up to 8 module and suitable for Anchor/Havells/Legrand, accessories etc and making good to the disturbed surfaces to match the existing complete all as specified and directed for one light point controlled by one, one way switch 06 Amps

All as per above but one fan point controlled by one, one way switch 06 Amps

All as per above but one 3 pin, 10 Amps socket outlet point on independent board controlled by one, one way 06 Amps switch

All as per above but one 3 pin, 10 Amps socket outlet point on same board controlled by one, one way 06 Amps switch

All as per above but point wiring with 2.5 Sqmm single core FRLS cables and earth continuity wire of 2.5 Sq mm single core FRLS cable for one 3 pin 20 Amps socket out let point controlled by one, one way switch on independent board complete all as specified and directed

S&F modular switch, 10 Amps, single pole, one way, 250 volts, one module complete

S&F modular switch, with indicator, 20 Amps, single pole, one way, 250 volts, one module complete

S&F modular socket outlet 05 Pin, 06 Amps, 02 module with shutter complete

S&F modular socket outlet 02 in 01, 03 pin, 06 Amps and 16 Amps, 02 module with shutter complete

S&F modular ceiling fan regulator, stepped type of 0 to 04 rotary steps, electronic, 02 module, humfree, AC, 230 volts, 100 watts complete all as specified & directed

S&F (in repair) 9/10 W LED fitting (2 fit) attractive wall mounted type suitable for mirror fittings, all accessories pre-wired including connecting up with twin core flat flexible copper conductor cable of suitable size, including taking down of existing unsv light fitting complete all as specified and directed

S&F (in repair) on wall / ceiling LED batten lighting fixture 20 watts LED 6500K (4'), with Polycarbonate housing and integrated electronic driver and all accessories pre-wired including connecting up with twin core flat flexible copper conductor cable of suitable size with connector block, including taking down of existing unsv light fitting complete all as specified and directed

S&F decorative wall mounting, fixture with opal PC diffuser suitable for 10/12 watt LED Lamp, lamp holder, including 12 Watts LED bulb of 6500 K of B22 base cap, and all accessories pre-wired including connecting up complete all as specified and directed

S&F energy saving security light fitting of 45 watts LED environmental friendly pressure die-cast aluminium IP 66 roadway luminaire with high power LED as light source comprising with electronic driver and all accessories pre-wired incl connecting up with PVC insulated copper conductor cable 1.5 sqmm, 3 core as required for connections and 40 mm bore light grade GI tube mounting bracket of 1.5 meter in length, bend to shape and fixed to wall by means of 02 nos. of 40 x 5 mm flat iron clamps, nuts, bolts and washers etc complete all as specified and directed

M&L for sub main wiring with 06 Sqmm nominal cross sectional area, two SC, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable with and including continuous earth wire of size 06 Sqmm nominal cross sectional area, and connected to common earth and earth dolly with suitable copper lugs and drawing into and including rigid non-metallic PVC conduit of 25 mm dia, medium grade complete with and including all PVC conduit accessories concealed into wall by cutting of chases in wall and making good to the disturbed surfaces to match the existing including taking out the unserviceable sub main wiring complete all as specified & directed

S&F (in repair) industrial type SPN enclosure with a two pin and earth plug and socket complete with and including MCB, SP, AC, 240 volts of 20 Amps, 'C' curve 10 KA breaking capacity and flush to wall including all cuttings & chases etc in wall and making good to the disturbed surfaces to match the existing complete all as specified & directed

S&F (in repair) sheet metal enclosure distribution board, single pole and neutral, AC, 240 volts, 04 way, with 200 Amps rated copper bus bar and metal door with IP - 43 & IK 09 protection along with cable end box for above DB and flush to wall including all cutting etc in wall and making good to the disturbed surfaces to match the existing complete all as specified directed

S&F MCB, SP, AC, 240 volts of 16 to 32 Amps capacity "C" curve, 10 KA breaking capacity and making connections by using suitable copper lugs complete all as specified & directed

S&F MCB, DP, AC, 240 volts of 40 Amps capacity "C" curve, 10 KA breaking capacity and making connections by using suitable copper lugs complete all as specified & directed

S&F Exhaust fan metal body wall mounted type of 250 mm sweep, 240 volts, AC, 50 Hz capacity, cutting of hole in wall and all arrangements for mounting of fan including making good of disturbed surface etc complete all as directed

S&F desert cooler of body size 25"x25"x32", made out of corrosion resistant ,18 SWG GI sheet duly powder coated paint with 500 mm sweep copper wound fan motor kit of not less than 180 watt with metallic blade, ISI marked, 1400 RPM, 230 volt, AC, water tank capacity not less than 100 ltr, incl plastic submersible pumps, electronic fan regulator with Piano type switch, cooler stand of suitable size as directed, and desert cooler to be fitted at existing window with 6 mm thick plywood of required size at site to cover the gapof window complete all as specified and as directed

Supply and fix room Window type air conditioner, Inverter type, electric driven, single phase, 230 Volt, 50 Hz, cooling capacity 4500 K Cal per hour (1.5 Ton), BEE 5 star rating, rotory compressor, copper condenser, LED display, white in colour with cardless remote control incl complete electric connection and with proper making arrangement in window of size at required at site including cutting, drilling etc in window for proper fixing of AC complete all as specified and directed (Make - Voltas / Lloyd / Blue Star / Samsung / LG) [Manufacturer Warranty : 1 Year on Product, 10 Years on Compressor)

S&F voltage stabilizer for automatic operation, single phase naturally air cooled, indoor wall mounted type, fully elecronic controlled & designed for input variation between 170 V to 250 V with output voltage stabilized at 230 V with accuracy of ± 2.5 % and of capacity 3.0 KVA complete all as directed

M&L for submain wiring with two single core (submain) PVC insulated cable with 4 sqmm nominal cross sectional area stranded copper conductor and one single core green PVC insulated 4 sqmm stranded copper conductor earth continuity cable drawn through non metallic rigid PVC conduit 20 mm dia concealed in wall including all conduit and fixing accessories including cutting chases & making disturbed surfaces complete all as specified and directed

S&F sheet metal SPN enclosure with a two pin and earth plug and socket complete with and including MCB, SP, AC, 240 volts of 20 Amps, 'C' curve 10 KA breaking capacity and flush to wall including all cuttings & chases etc in wall and making good to the disturbed surfaces to match the existing complete all as specified & directed

Sch of Credit- Total contract sum shall be calculated after deduction of Sch of Credit amount Credit amount - 1,485.00

SARTHEE CONSTRUCTION CO.