1.20 H.P. Solar Pump, VFD, Solar Panel set and 2. 10 H.P. DC Solar Pump, Solar Panel, Steel Structure supplying, installation and commissioning for Lift Irrigation Scheme at Bardeva, Block - Padma, District- Hazaribag

Amount

For 20 Hp SPV AC Surface Pump

Solar Module Mounting (Galvanised Steel) surface structure (for 50 kW) having Hot deep galvanised of Zinc thickness 80micron and as per IS4759 with C Channel $ anti theft with nut bolt of grade SS304,which should also withstand high wind velocity upto 150km/hr or as per MNRE.

50kWp SPV module of 330wP or higher rating, which must have Specification as per IS 14286/IEC 61215 .The module must have to quilify IS/IEC 61730 part I $ II (or having mechanical load test of 5400Pa) for safety purpose.Module to Module wattage mismatch in SPV Array shall be +/-3% and to qualify IEC TS 62804-:2015 for the detection of potential induced degradation and warranted for output wattage not less than 90% in 10yrs and 80% at the end of 25yrs as per MNRE.

SPV controller/VFD integrated with GPRS,having MPPT ,Protection IP 65 or above as per MNRE.

Solar cable 4 mm2 used as per IS 694 or as per MNRE.

copper cable 95 mm2 used as per IS 694 or as per MNRE.

Arrangement of Lightening Arrestor excluding Earthing

20 H.P. A.C. Solar pump set of having performance with respect to Total Head,Maximum Current,Capacity, Voltage Range etc as per MNRE guidelines.

Array junction box (IP 65 or above ) as per MNRE

Miscllaneous Accessories for Installation of 20H.P. Solar Pump

Supplying,installation and commissioning Charge of Module $ Structure

Maintenance for atleast 5 years or as per MNRE guidelines

For 10 Hp SPV DC Surface Pump

Solar Module Mounting (Galvanised Steel) surface structure for 50 kW having Hot deep galvanised of Zinc thickness 80micron and as per IS4759 with C Channel $ anti theft with Nut Bolt of grade SS304 which should also withstand high wind velocity upto 150km/hr or as per MNRE.

50 kWp SPV module 330wP or higher which must have Specification as per IS 14286/IEC 61215 .The module must have to quilify IS/IEC 61730 part I $ II (or having mechanical load test of 5400Pa) for safety purpose.Module to Module wattage mismatch in SPV Array shall be +/-3% and to qualify IEC TS 62804-:2015 for the detection of potential induced degradation and warranted for output wattage not less than 90% in 10yrs and 80% at the end of 25yrs as per MNRE.

SPV controller/VFD integrated with GPRS,having MPPT ,Protection IP 65 or above as per MNRE.

Solar cable of 4mm2 used as per IS 694 or as per MNRE

Copper cable 25mm2 used as per IS 694 or as per MNRE.

Arrangement of Lightening Arrestor excluding Earthing as per MNRE.

10 H.P. D.C. (PMSM/BLDC/SRM) Solar pump set of having performance with respect to Total Head, Maximum Current,Capacity,Voltage Range etc as per MNRE guidelines.

Array junction box (IP 65 or above) as per MNRE

Miscllaneous Accessories for Installation of 10 H.P. Solar Pump

Supplying,installation and commissioning Charge of Module and Structure

Maintenance for atleast 5 years or as per MNRE guidelines

M/S SANJAY KUMAR UPADHYAY

SG Enterprises

Unique Power & Automation Pvt. Ltd.

SHYAM INDUSTRIAL VENTURES PRIVATE LIMITED

GR ASSOCIATES