Construction of Gantry (Signage Gate) on Various main roads of Dewas City

Amount

Earth work in excavation by mechanical

means (Hydraulic Excavator)/ manual means in foundation trenches or drains including dressing of sides and ramming of bottoms, for any lift including getting out the excavated soil and disposal of surplus excavated soil as directed, (No extra lift and lead is payable)

Providing and laying in position cement concrete of specified grade including the cost of centering and shuttering if required - All work upto plinth level P.C.C. FOR M-15 (20mm)

Reinforced cement concrete work (with 20 mm nominal size graded stone aggregate) in foundation, footing, raft etc. All works upto plinth level and super structure including the cost of centering, shuttering, finishing and reinforcement in concrete grade. M-25 Grade Concrete

Steel for R.C.C. Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding including cost of binding wire all wastages and overlaps, couplers (overlaps shall be provided as per requirement of IS 13920 for ductile detaling IS 456 RCC Design & SP 34 Reinforcement detailing ) etc. complete 70 kg/m3 of concrete(28.42x70)

Design, supply, fabrication, taransportion and erection of structural tubularal/mild steel built-up sections for gantry gates colums trus beam framed etc. for steel building in column, rafter, truss, floor joist, wind bracings, tie beam, foundation bolts, fasteners etc.in tubler steel section, round or squre pipe and tee, angle steel solid section Steel Gazzete Plate Nut Bolts Anchor bolts Etc.. etc. Including cutting fabricating oisting/erecting/welding fixing in position making riveted/bolted/welded conncetions and two coats of Epoxy/ extirior paint and one coat of primer.including all necessary machineries like Cranes,JCB, Traffic diversion transportation and all required machineries.

ACP WORK Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign board as per IRC 67-2010 made of high intensity Micro-Prismatic Grade Sheeting (Type XI) vide clause 801.3.3 fixed over Aluminium composite material sheet with thermoplastic core of Low density polyethylene (LDPE) between two thick skins/sheets of aluminium with overall thickness of 4mm and aluminium skin of thickness 0.3 on both side, the ACM shall conform to Table 800-1 of specification and High Intensity Micro Prismatck Grade Sheeting shall conform to Table 800-3 of specification.The printing on the high intensity grade sheeting shall conform to Clause 801.3.7 with water based latex optimized transparent ink as specified by the sheeting manufacturer including all material and labour but excluding cost of steel frame

H I S BUILDCON

maheshwari enterprises

G and G Traders

KRISHNA VERMA