SPECIAL REPAIR TO ROAD AT DIPATOLI MILITARY STATION UNDER GE DIPATOLI

Amount

Repair to pot holes any depth n. exc 1 sqm each incl sweeping free from dust and mud, water scoring sunken surface in roads, paths etc cutting around edges to at least 25 mm in depth, making good by filling screened and graded road metal watering and well ramming ( incl supply of road metal ) complete all as Specified and directed

M&L for premixed bituminous macadam laid/rolled and compacted to required gradient and camber with paving bitumen VG-30 with 4% binder content by weight of total mix with 8 to 10 Ton power roller complete all as specified and directed.

Material and Labour for preparing of black top surfaces by brushes with wire brushes for removing caked mud of surface etc sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc on Black top surface and applying evenly a priming/tack coat with bituminous primer @ 5 Kg per 10 Sqm with paving bitumen (VG-30) laying bituminous premix asphaltic dense concrete 40mm consolidated thickness by using mechanical pavers with 5.5% binder content as in semi dense asphaltic concrete rolled and compacted to required camber & gradients with 8 to 12 tones power road roller to a uniform smooth surfaces completed all as specified and directed.NOTE:- Work is to be carried out in Narrow width or as per direction given by Engr-in charge

M&L for preparation of road surfaces and applying thermoplastic reflective paint in marking of minimunm 2.5mm thick single coat as in centre line and edge line road marking in white/yellow (approved colours) colour & shade of 150/100mm width using 'HOT MARK' thermoplastic modern propelled road marking machine incl all ingredients such binder, glass beads, titanium dioxide, calcium carbonate inter fillers thermoplastic requirement for glass beads shall be as per table No. 800.4 of MOST specification incl spraying glass beads etc all as per manufacturers instructions and complete all as specified and directed.

Supply and fixing cat eye solar reflective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA striplens reflector of model No. DA 972.0 fixed with and incl MS stud of suitable size as per manufactures instructions.

Demoiltion of stone slabs and tiles of any description or thickness laid dry in floors, aprons etc complete all as specified.

Demolition of cement concrete in ground floors and paving n.exc 15cm thickness (below or above ground evel) all as specified and directed.

M&L for 100 mm thick cement concrete 1:4:8 type D2 (40mm graded stone aggregate ) as in sub base of pathway and parking area complete all as specified and directed

S&F for machine pressed precast concrete interlocking paver block any shape and size coforming to IS 15658 - 2006 of 60 mm thick using rubber moulded casting with glosy finish with grey cement and pigment M-35 grade of concrete complete all as specified and directed.

M&L for Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.

M&L for cement concrete type B1,1:2:4 (20 mm graded crushed stone aggregate) as in coping, bed block , water trought and similar works including rounding, chamfered and throating complete all as specified .

HIND CONSTRUCTIONS

Raj Construction

JAYSHREE ENTERPRISES