REPAIR MAINT OF STREET LIGHTS AND ALLIED WORKS AT SUKNA AREA UNDER GE SUKNA

Amount

Supply and fixing of LED street light fittings of capacity 45 W made up of pressure die cast aluminium housing with high efficiency LEDs as lighting source and lens embedded PC cover having top opening seprate driver compartment with IP66 protection and impact resistance of IK07, lumen efficacy of minimum 120 Lm/W and SPD of 10 KV with a repair /replacement warranty of minimum 05 years including taking down old unsv from pole complete all as specified and as directed.

Supply and fixing of LED street light fittings of capacity 60 W made up of pressure die cast aluminium housing with high efficiency LEDs as lighting source and lens embedded PC cover having top opening seprate driver compartment with IP66 protection and impact resistance of IK07, lumen efficacy of minimum 120 Lm/W and SPD of 10 KV with a repair /replacement warranty of minimum 05 years including taking down old unsv from pole complete all as specified and as directed.

Supply and fixing of LED street light fittings of capacity 90 W made up of pressure die cast aluminium housing with high efficiency LEDs as lighting source and lens embedded PC cover having top opening seprate driver compartment with IP66 protection and impact resistance of IK07, lumen efficacy of minimum 120 Lm/W and SPD of 10 KV with a repair /replacement warranty of minimum 05 years including taking down old unsv from pole complete all as specified and as directed.

Supply and fixing of LED street light fittings of capacity 120 W made up of pressure die cast aluminium housing with high efficiency LEDs as lighting source and lens embedded PC cover having top opening seprate driver compartment with IP66 protection and impact resistance of IK07, lumen efficacy of minimum 120 Lm/W and SPD of 10 KV with a repair /replacement warranty of minimum 05 years including taking down old unsv from pole complete all as specified and as directed. Make :- Havells PEARL PLUS / SURYA / PHILIPS / BENLO ULTIMA

M&L for Weather proof flat three core PVC insulated and PVC sheathed industrial round 3 core flexible copper cable of size 1.5 Sqmm 1100 volts grade for connection of lights to Pole Box, after dismantling old one complete as specified and directed.

M&L for PVC conduit 20mm dia fixing to pole from JB to security light complete incl fixing arrangement to pole with the help of 03 pairs of clamps and nut bolts including taking down old unsv complete all as specified and directed.

S & F of Pole mounted Junction box with terminals of size 182 x 180 x 111 mm, made of high quality thermoplastic polycarbonate, dust & jet water proof, chemical, acid corrision, impact IK-09, insulated & shock proof IP 66, grey RAL 7035 color with internaly embedded gasket (PUR) , along with cover and metric knockout all sides including back of the base must including terminals 4Nos including fixing arrangement with MS flat of size 40X4mm , nuts , bolt and washers and MCB SP 6-32 Amps 01 No including taking down old unsv complete all as specified and as directed.

S&F in replacement for 32 mm dia GI tubing light grade bracket over all 1.2 mtr length bent to shape 120 degree with cutting as required and bend to shape with flat iron clamp of size 32x6 mm, 2 Nos, suitable size of nut bolts and washers complete for fixing street light fittings on electric poles/bldgs for security complete all as specified and directed.

S&F of 6 KW three phase automatic street light control panel with and including astronomical switch for automatic operation on/ off street light as per set time through programmable 24 hrs switch , 32 A TP Power contactor, 40 A TPN MCB wall /floor moutable, IP 54 enclosure made out of CRCA sheet duly powder coated conforming to IS/IEC 61439 & 60529 in built short circuit protection ,Class H insulation,FRLS internal wiring,extended wide band coil and locking arrangement with padlock and panel lock including taking down old unsv complete all as specified and directed.

S&F in repair of Street Light Timer switch with 24 Hour daily setting, protected with IP-53 box, 230 volt,50Hz AC,ON-AUTO-OFF on front panel, one segment of 15 Min with accuracy of +/- 5 mins, complete all as specified and directed.

S&F in repair of 3 Pole power contactor type MNX 32 with AC3 rating of 32 Amps and AC1 rating of 55 Amps with 2 NO+2NC blocks complete all as specified and directed.

S&F in repair of 3 Pole power contactor type ML- 03 with AC3 rating of 32 Amps and AC1 rating of 40 Amps complete all as specified and directed.

M&L for earthing complete with galvanised steel earth plate electrode of size 600 x 600 x 6 mm thick, burried directly in ground (earth pit not less than 2.25 m below normal ground level) with top edge of the plate not less than 1.5 m below normal ground level connected to galvanised iron strip of size 25X4 mm as earthing lead by means of nuts, bolts and washers of galvanised iron and earth lead protected by galvanised iron pipe 15 mm bore (light grade) and connected to earth test point and including cement concrete pit in PCC (1:3:6) type C-1(using 20 mm graded aggregate) and pre-cast RCC cover slab of size 540 x 540 x 50 mm thick, reinforced with 8 mm dia TMT bars both ways and one handle for lifting made with 10 mm dia mild steel bar,funnel, wire mesh 20 mm bore galvanised (light grade) for watering, charcoal and salt in alternate layers including necessary execuation and eath works in any types of soil complete all as shown on Electrical plate No 3 of MES SSR-I complete all as specified and directed. Note :-No extra payment will be for the earthing strip of size 25X4 mm.

M&L for painting steel tubular poles 9 mtr height with one coat of aluminium paint from bottom to top including cross arms, GI brackets etc after cleaning and preparing the surface and marking alternate yellow and black strips 30 cm height total 5 Nos with two coats of synthetic enamel point over a coat of primer complete all as specified and as directed.

M&L for painting of PCC poles 9 mtr height with one coat of aluminium paint from bottom to top including cross arms,GI brackets etc after cleaning and preparing the surface and marking alternate yellow and black strips 30 cm height total 5 Nos with two coats of synthetic enamel point over a coat of primer complete all as specified and as directed.

Excavation in trenches not exc. 1.50 m wide and not exc. 1.50 m in depth for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. not exc. 10 Sqm on plan and getting out in soft / loose soil complete all as specified and directed.

Removing Excavated soils not exc 50 M and depositing where directed at a level not exc 1.5 M above the starting point complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick with soils complete all as specified and directed.

M & L for plain cement concrete (1:3:6) type C-2 using 40 mm graded stone aggregate in foundation of pole / strut etc including necessary form work all as specified and directed.

M&L Plain cement concrete 1:2:4, type B-1 (using 20mm graded crushed stone aggregate) as in lintels upto 1.5m clear span, cills, steps, seismic and other similar bands, plinth courses, coping, bed plates and the like including weathering, slightly rounded or chamfered angles and throating including necessary form work, complete all as specified and directed.

M&L for sand cushioning to under ground cable using locally available fine clean dry river sand over,under ground UG cable laid in treches and gently punning to cushioning to cable complete all as directed by Engineer-in-Charge. Note : For the purpose of payment only punned thickness will be measured.

M&L for common burnt clay building bricks (locally available best quality), sub-class ‘B’ designation 75 of size 230x115x75 mm to cover LT underground cables , laid dry and flat abutting each other with gaps not exceeding 10mm complete all as specified and directed.

Labour for Boring/Drilling (horizontally) manually under min 0.5 to 2 m deep in soil below existing road suitable for passing GI tubing of 40 to 80 mm bore complete all as specified.

Supply and fixing in repair of GI tubing light grade 40mm dia for protection of cable on pole , under road crossing or across drain , along electric pole or floor / wall including taking down old unsv complete all as specified and directed .

Supply, laying testing and commissoning in replacement of cable XLPE insulated screened PVC bedded galvanised steel strip or wire armoured electric power cables (heavy duty) LT Cable with stranded aluminium conductor 1100 volts grade of size 10 sqmm 4 core including taking down old unsv complete all as specified and directed.

Disconnecting and taking down existing LED street light fitting of any make or any capacity for repair/replacement of burnt/worn out driver through ladder/motorized/manual system from GI bracket on pole of any size and refix the same after cleaning,general overhauling,repairing and making serviceable to its original position and testing complete all as specified and as directed. Note:- The New consume item will be measured and paid separately.

Supply only LED driver of capacity 45W.

Supply only LED driver of capacity 60W.

Supply only LED driver of capacity 90W.

Supply only LED driver of capacity 120W.

Taking down high Mast fitting from high mast structure through motorized system and checking all the fittings,cleaning the steel rope and repair as required.

Supply and fixing in replacement of energy saving LED flood light 150 watt 230 V AC outdoor type, thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant,die cast aluminium housing ,lumen efficacy of minimum 120 Lm/W,min surge protection of 10 kV including taking down old unsv complete all as specified and as directed.

Supply and fixing in replacement of energy saving LED flood light 200 watt 230 V AC outdoor type, thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant,die cast aluminium housing ,lumen efficacy of minimum 120 Lm/W,min surge protection of 10 kV including taking down old unsv complete all as specified and as directed.

Supply and fixing in replacement of circular LED post top lantern 45W, 230 volts white in color, AC outdoor type,pressure die cast aluminium body and opal PC cover with IP 66 protection and IK07 rating with minimum efficacy of 120lm/W including taking down old unsv complete all as specified and as directed.

S&F Taking down and disconnecting old unsv solar street light and all in one solar street light made with high efficiency mono crystalline solar PV module,Lithium Ferro Phosphate battery with in buit BMS technology,high eficiency LED,MPPT solar charge controller and aluminium extruded body & specially programmed to automatically control the dimming and brightness of light,which increases the backup time with system wattage 20W,12.8 volt,18AH battery DC system,lumen output greater than 125 lm/W,system panel module capacity 12V,MPPT charge controller & PR sensor with CCT 6000-6500K incl polycrystaline cell,IP-65 with efficiency greater than 90% with adjustable tilt angle 0-15 degree including galvanized steel pole inbuilt complete all as specified and as directed. Note:- Excavation and earth work will be measured and paid seprately. Make:- Surya/Havells/Crompton

M&L for servicing old solar street light fittings of 20/40W capacity including servicing of module cleaning,battery inspection,checking of distilled water in battery, inspection of electronic circuits,connection etc complete all as specified and as directed. Note :- Battery charging, disconnect, connection cost one time if battery discharge shall be included in the above quoted rates.

S&F in repair solar battery 150AH 12 volts complete all as specified and directed. Note- Manufacture warranty certificate shall be deposited by contractor before payment. Make:- Luminous / Exide / Amron

Supply and pore battery electrolyte (distilled water with acid) once in every quarter for each battery complete all as specified and directed by Engr-In-Charge.

Supply and fix in repair MPPT solar charger controller suitable for output supply 12.8 volt DC including all connection, complete all as specified and directed.

B.B.Enterprise (BID ID -3098404)

R N SAH N CO (BID ID -3101117)

MS ORIENT ENGINEERING WORKS (BID ID -3102860)

M/S JAGRITI ENTERPRISES (BID ID -3106384)

Jagatbandhu Enterprises (BID ID -3102713)

Janata Enterprises (BID ID -3105436)

SHRI N.DAS (BID ID -3103944)

GEETA CONSTRUCTION (BID ID -3102000)

S GUHA (BID ID -3107797)