801274/A COMPLETION OF INCOMPLETE WORK FOR CONSTRUCTION OF 24 OMQs AT CAW FOR OFFICERS ATTENDING HACC AT SECUNDERABAD

Amount

GENERAL SUMMARY NOTE: Schedule ‘A’ Part I to XI are prepriced by MES under Ser No. 2 to 12. Bidders shall insert their lumpsum amount in the Green coloured field under Col-6 only.

Lumpsum price worked out by the contractor for “Building or works” as listed in Schedule ‘A’ Part–I

Lumpsum price worked out by the contractor for “Site clearance” as listed in Schedule ‘A’ Part–II

Lumpsum price worked out by the contractor for “Internal water supply” as listed in Schedule ‘A’ Part–III

Lumpsum price worked out by the contractor for “Internal Electric supply” as listed in Schedule ‘A’ Part–IV

Lumpsum price worked out by the contractor for “Road/Path/Culvert” as listed in Schedule ‘A’ Part–V

Lumpsum price worked out by the contractor for “External water supply” as listed in Schedule ‘A’ Part–VI

Lumpsum price worked out by the contractor for “External Elect supply” as listed in Schedule ‘A’ Part–VII

Lumpsum price worked out by the contractor for “Sewage disposal” as listed in Schedule ‘A’ Part–VIII

Lumpsum price worked out by the contractor for “Area drainage” as listed in Schedule ‘A’ Part–IX

Lumpsum price worked out by the contractor for “Boundary wall/fencing & gate” as listed in Schedule ‘A’ Part–X

Lumpsum price worked out by the contractor for “Arboriculture” as listed in Schedule ‘A’ Part–XI

Lumpsum price worked out by the contractor for “Provisional sum” as listed in Schedule ‘A’ Part–XII

SCHEDULE `A' PART - XIII Fittings & fixtures is not prepriced by MES. Bidder shall insert their rates in Green filed under Col-6.

15mm dia two way bib cock with built in arrangement to fix 15mm brass union of Health faucet, fancy type cast copper alloy CP with crutch or butterfly handle, screwed down, screwed to brass union of PP-R fittings complete all as specified and as directed.

Hand shower (Health faucet) with 8mm dia, 1 metre long flexible tube and wall flange of approved make fixed with union fitted to two in one tap complete all as specified and as directed.

Bib tap 15mm dia cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed.

15mm dia concealed type stop valves (heavy body casted) fancy type, chromium plated cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed.

Shower arm 240mm length (light weight) round shaped for wall mounted shower with wall flange of approved make complete all as specified and as directed.

Wall mixer 3-in-1 system with provision for both hand shower and overhead shower complete with 115mm long bend pipe connecting leg and wall flanges complete all as specified and as directed.

Hand shower 100mm dia round shape multiflow (ABS body chromium plated with grey face plate with Rubit cleaning system all as specified and as directed.

Overhead shower 120mm dia round shape single flow (ABS body chromium plated with grey face plate) with Rubit cleaning system of approved make complete all as specified and as directed.

Overhead shower 80mm dia round shape single flow (ABS body chromium plated with grey face plate) with Rubit cleaning system of approved make complete all as specified and as directed.

Ceiling fan of size 1200mm sweep complete including with, cable 3 core of size 0.5 sqmm from ceiling rose to fan, including writing MES No 2cm height with synthetic enamel black paint installed complete all as specified. Note :- Celing fan will be issued under Sch 'B' as per the Sch 'B' rates.

Wall mounting fan of size 400mm sweep complete,with cable 3 core of size 0.5 sqmm from ceiling rose to fan, including writing MES No 2cm height with synthetic enamel black paint all as specified. Note :- Wall mounting fan will be issued under Sch 'B' as per the Sch 'B' rates.

Ventilating fan of size 250mm sweep, 1 phase, complete, with cable 3 core of size 1.0 sqmm from ceiling rose to fan, including writing MES No 2cm height with synthetic enamel black paint all as specified. Note :- Ventilating fan will be issued under Sch 'B' as per the Sch 'B' rates.

High speed exhaust fan of size 225mm sweep, 1400 RPM, 1 phase, complete, with cable 3 core of size 1.0 sqmm from ceiling rose to fan, including writing MES No 2cm height with synthetic enamel black paint all as specified Make Orient/Usha/Bajaj

Exhaust fan of size 225mm sweep, 1400 RPM, 1 phase, complete, with cable 3 core of size 1.0 sqmm from ceiling rose to fan, including writing MES No 2cm height with synthetic enamel black paint all as specified. Note :- Exhaust fan will be issued under Sch 'B' as per the Sch 'B' rates.

4ft LED surface & wall mounted batten LED luminaries , 22 Watts, with latest LED technology and efficient optics ensuring perfectly uniform illumination and unparallelleled light distribution high optically efficient serrated diffuser, Isolated Multistage CCCV driver with voltage range 150-270V AC, temperature range- 0 to 50 Deg C, CRI >80, class-1, SDCM <5, Driver efficiency>85%, Power factor >0.95, THD<10%, Colour temperature-6500K, short circuit and over circuit protection, Surge protection- 3KV in CM, Safety Extra Low Voltage Safe level<60V DC as per IS-10322/IEC-60598 standard, IP20 protected, 50000 burning hours, with 70% of its initial lumen maintained, Luminaire efficacy>100lm/W fixed complete including all accessories and provision of PVC sheathed 3 core 1.5 Sqmm copper conductor for connection complete all as specified and directed. Make : Philips Cat Part No SP 310X LED 22S-6500 PSU OD WH or its equivalent Make of WIPRO/Bajaj/CG

4ft LED surface & wall mounted batten LED luminaries , 22 Watts ,including all accessories and provision of PVC sheathed 3 core 1.5 Sqmm copper conductor for connection complete all as specified and directed. Note :- 4ft LED surface & wall mounted batten LED luminaries , 22 Watts will be issued under Sch 'B' as per the Sch 'B' rates.

4ft LED surface & wall mounted batten LED luminaries , 20 Watts, with latest LED technology and efficient optics ensuring perfectly uniform illumination and unparallelleled light distribution high optically efficient serrated diffuser, Isolated Multistage CCCV driver with voltage range 150-270V AC, temperature range- 0 to 50 Deg C, CRI >80, class-1, SDCM <5, Driver efficiency>85%, Power factor >0.95, THD<10%, Colour temperature-6500K, short circuit and over circuit protection, Surge protection- 3KV in CM, Safety Extra Low Voltage Safe level<60V DC as per IS-10322/IEC-60598 standard, IP20 protected, 50000 burning hours, with 70% of its initial lumen maintained, Luminaire efficacy>100lm/W fixed complete including all accessories and provision of PVC sheathed 3 core 1.5 Sqmm copper conductor for connection complete all as specified and directed. Make : Philips Cat Part No BN 150W LED 20S-6500 OD GR or its equivalent Make of WIPRO/Bajaj/CG

Surface mounted luminaries , 15 Watts,including all accessories and provision of PVC sheathed 3 core 1.5 Sqmm copper conductor for connection complete all as specified and directed. Note :- LED surface & wall mounted batten LED luminaries , 15 Watts will be issued under Sch 'B'as per the Sch 'B' rates.

LED surface down light LED luminaries , 10 Watts, complete including all accessories and provision of PVC sheathed 3 core 1.5 Sqmm copper conductor for connection complete all as specified and directed. Note :- LED surface down light LED luminaries , 10 Watts will be issued under Sch 'B'as per the Sch 'B' rates.

20 W High efficient LED Streetlight complete all as specified and directed. Note :- 20 W High efficient LED Streetlight will be issued under Sch 'B' as per the Sch 'B' rates.

MCB DB VTPN 6 way vertical double door 415 V AC 50Hz with for MCCB FP as incomer and MCB/RCBO's SP/SPN/TP/TPN as out going with tinned copper bus bar ,neutral link earth link complete Make : LEGRAND Cat No 607695 or equivalent make of Bentec/Schneider

MCB DB TPN 6 way vertical double door IP 43 protection, 415 V AC 50Hz with for MCB/RCBO's FP as incomer and DP/SP MCBs as out going with tinned copper bus bar ,neutral link earth link complete Make : LEGRAND Cat No 607726 or equivalent make of Bentec/Schneider

MCB DB SPN 4 way, acrylic double door IP 43 protection, 240 V, AC 50Hz with for MCB/RCBO's double pole as incomer and DP/SP MCBs as out going with tinned copper bus bar ,neutral link earth link complete Make : LEGRAND Cat No 607720 or equivalent make of Bentec/Schneider

MCB SP 6-32 Amps, 'C' curve 240 volts 10 KA 50 HZ Make : LEGRAND Cat 408587 to 408595 or equivalent make of Bentec/Schneider

MCB SPN 6-32 Amps, 'C' curve 240 volts 10 KA 50 HZ Make : LEGRAND Cat 408609 to 408617 or equivalent make of Bentec/Schneider

MCB TPN 32 Amps, 'C' curve 240 volts 10 KA 50 HZ Make : LEGRAND Cat 408680 or equivalent make of Bentec/Schneider

Electronic type KWh Energy meter, LCD display tamper proof, 3 Phase, 5-20Amps, 240 Volts, 50Hz with class of accuracy 1.0 and optical port, solidly earthed power supply system with balanced and unbalanced load. Meter shall be as per IS-13779 with IS/BSI certificate mark and should be of transparent ploy carbonate body with tamper proof design and should give accuracy irrespective of mounting position. The accuracy should not get affected by external magnetic field. It should be with LED indication proportional to KWh for on spot calibration check and including necessary testing all as specified and as directed by the Engr-in-Charge. Make-L&T Cat NoWM301BC4D20 /Havells/HPL/Bentec Note:- 1.The Meter should have following features:- (a) LED Indication for Power on, Reverse Current , KWh Pulse output (b) Display-6 digit (1 decimal digit) 2. the Meter shall continue to operate satisfactory under the following conditions:- (a) Phase/Neutral Reversed (b) Supply side/Load side interchanged (c ) Full Load/Partial Load terminated to Earth

All as per item No 38 here in before but Electronic type KWh LCD Electric Energy Meter tamper proof, 1 Phase, 5-30Amps, 240 Volts, 50Hz including necessary testing all as specified and as directed by the Engr-in-Charge. Make-L&T Cat No-WM101BC 7DDH

Indoor type Elect energy meter box enclosure of suitable size ( with sufficient usage/ working space inside the box) to accommodate Four number 3 phase and one number of 1 phase electronic energy meter made out of 2 mm thick CRCA sheet, powder coated, factory made , dust and vermin proof double door with rubber gasket, opening for taking the meter rating with clear crystal acrylic cover of suitable size and over all size of metering box not less than 1.5 Mtrx1.2 Mtr 0.20Mtr with proper gasket and 6 mm thick hylem sheet as insulating material with locking arrangements including necessary cementing work and fixing arrangements on wall (semi flush type) all as specified and as directed

Modular Motor Starter, 16 Amps,2 module, including necessary metal box and cover plate all as directed by the Engr-in-Charge. Make Legrand Cat No.673030

Street light bracket made out of 25mm dia medium grade GI pipe of 1.5m length bent to required shape including fixing on building walls with two sets 25 x 4mm size of MS clamps, suitable nuts & bolts all as specified and as directed

Sintex SMC loop in loop out junction box of size 170x170x105 mm including necessary Clamps, nuts & Bolts with washers including 01 Nos 6 Amps MCB SP duly fixed inside the box etc required at site all as specified and as directed by the Engr-in-Charge.Cat No.GSJB-1414 Make: Sintex

TV/Sat /FM 6 shielded socket , 1/2 module Make: Legrand

Modular Telephone socket , 1/2 module, RJ-11 with shutter Make: Legrand

Earthing complete with galvanised steel earth plate electrode 60 cm x 60 cm x 6.0 mm thick buried directly in ground earth pit not less than 2.25 m deep below normal ground level with the top edge of earth plate at a depth of not less than 1.5 m below normal ground level connected to GI earth strip 32 x 3mm as earth lead by means of bolts, nuts, check nuts and washers made out of GI and GI strip protected by 40 mm bore light grade GI pipe as well as 20 mm dia medium grade pipe 1.5 mtr fixed with funnel and wire mesh as specified and connected all as shown in electrical plate No 3 of SSR Part I including necessary earth work and excavation in any type of soil and PCC 1 : 2 : 4 type B - 1 in chamber and 40 mm thick RCC 1 : 2 : 4 type B - 1 cover slab with 6 mm dia mild steel bars at 100 mm centre to centre both ways with 6 mm dia M S hooks complete all as specified. The GI earth strip & 40mm dia bore light grade GI pipe upto 7.5 M deemed to be included in the rate quoted by the contractor. Beyond 7.5mm GI earth strip dia and GI tubing light grade 40mm dia shall be measured and paid under the respective item of schedule all as specified and as directed

Provision of 5.5 Mtr wide steel gate of 2 mtr height including excavation in hard/dense soil, PCC in sub base, RCC in column/post, TMT bars in reinforcement, Mild steel work in pintol hinges, rendering in cement mortar, cement base painting to plastered surfaces, supply and fixing ornamental gate, painting to mild steel work, RF&R and removal of surplus soil etc complete for MS Gate complete all as specified and as directed and shown on drawings. No AFB/TD/40 SHEET 1/1 & 2/2

Provision of Wicket gate steel 1.20 mtr x 1.20mtr including excavation in hard/dense soil, PCC in sub base, RCC in column/post, TMT bars in reinforcement, Mild steel work in pintol hinges, rendering in cement mortar, cement base painting to plastered surfaces, supply and fixing ornamental gate, painting to mild steel work, RF&R and removal of surplus soil etc complete for MS Gate complete all as specified and as directed and as shown on drawing No AFB/TD/40 SHEET 1/1 & 2/3

Cutting of existing bituminous road for laying of GI pipe for UG cable & making good to the disturbed surfaces by providing PCC or same materials after laying of cable protection pipe and returning filling of soil all as specified and as directed. Note : Excavation and earth work below bituminous road shall be measured and paid separately under relevant items.

Supply, erection, testing and commissioning of transformer outdoor type capacity 200 KVA, inclusive with standard fittings, gauge as per relevant IS and all jointing materials, connecting with electrical system, earthing connections etc, 3 phase, 50 Hz, double wound with copper winding wire, in mild steel tank, as per IS -1180 (Part I) 2014 , 11KV/415 volts, 3 phase, with tapping arrangement on HT side to vary secondary voltage (+) 5% to (-)10% on step of 2.5% for variation of HV etc complete, including termination boxes on LT and HT sides, initial filling of transformer oil to appropriate level, testing for desired dielectric strength, including construction of platform of height not less than 1.5 mtr for mounting the transformer with brick masonry in 1:6 cement mortar, 112cm thick RCC slab, with a gap of 60 cm all round the transformer for working space all as specified and as directed.

Earthing complete with copper earth plate electrode of size 600mmx600mmx3.00mm thick buried directly in ground earth pit not less than 2.25 m deep below normal ground level with the top edge of earth plate at a depth of not less than 1.5 m below normal ground level, Earth plate shall be connected with double bolts, nuts, check nuts & washers to & including 25 x 3mm copper strip as earth lead, extended upto 7.5 mtr or upto test terminal point, drawn through 40 mm bore medium grade GI pipe for protection of copper strip in the ground, further connecting with suitable size of earthing strip to LT Panel, distribution boards, etc including excavation, earth work, charcoal, Magnesium sulphate - 50 Kgs & Bentonite powder - 30 Kg duly mixed in the black cotton soil for filling surrounding copper plate all as specified, PCC chamber, RCC cover slab, watering pipe 20mm dia bore medium grade, wire net, funnel etc & testing on completion all as specified in plate No 3 of SSR Part I complete all as specified and as directed. Note : GI pipe for protection of earthing strip if used and earth strip beyond 7.5 mtr shall be measured and paid separately under relevant items.

New generation energy saving & environment friendly long life Versatile pressure die cast aluminium IP66 street light fitting of capacity 1X45W LED, drawn through and including GI bracket of suitable size light grade 1.4 mtr bend to shape including MS clamps made out of flat iron of size 40x4mm - 02 Nos and necessary nuts, bolts, washers as required complete all as specified and as directed. Make : Havells LHETAXU7PN6J045 or equivalent in Philips/Crompton Greaves.

Factory made out door type street light loop in and loop out box made out of 2mm thick CRCA sheet, of size 220mmx180mmx150mm with pre treated & powder coated comprising suitable size bus bar, insulators, connectors etc and with one SP MCB 6A, C Series one PVC way connector etc including suitable size clamps, nuts, bolts, & washers complete including suitable clamps for fixing all as specified and as directed.

Cutting cast iron pipes in position for insertion of new tees, branches, of size 150mm dia bore including required CI special lead joints, rubber or fibre gasket, nut, bolts & washers etc for sub branch connection of size 100mm dia bore complete all as specified and as directed.

80mm dia sluice valve flanged of class 1.6 PN supplied and fixed including nuts & bolts with washers and rubber flanges etc, required at site complete all as specified and as directed.

100mm dia sluice valve flanged of class 1.6 PN supplied and fixed including nuts & bolts with washers and rubber flanges etc, required at site complete all as specified and as directed.

Construction of valve chamber having inner dimension 1000 x 1000 x 1000 mm (suitable for 80mm to 150mm sluice valve) with PCC 1:4:8 type D2 for foundation, brick work wall in cement mortar 1:4, PCC 1:2:4 type B1 for coping, rendering plaster in CM 1:4, 15mm thick including provision of MS Sheet top cover 3mm thick with brazing of MS flat of size 25x4mm at edges and in diagonal and angle iron base frame of 40x40x5 mm and suitable handle for opening and closing, painting with two coats of synthetic enamel paint over a coat of red oxide primer and locking arrangement including demolition existing valve chamber with necessary excavation and earth work complete all as specified and as directed.

Construction of valve chamber having inner dimension 600 x 600 x 600 mm (suitable for gate valve 50mm bore) with PCC 1:4:8 type D2 for foundation, brick work wall in cement mortar 1:4, PCC 1:2:4 type B1 for coping, rendering plaster in CM 1:4, 15mm thick including provision of MS Sheet top cover 3mm thick with brazing of MS flat of size 25x4mm at edges and in diagonal and angle iron base frame of 40x40x5 mm and suitable handle for opening and closing, painting with two coats of synthetic enamel paint over a coat of red oxide primer and locking arrangement including demolition existing valve chamber with necessary excavation and earth work complete all as specified and as directed.

UNITED TECHNO PROJECTS PVT LTD

Kanika Construction Company

Sri Raghava Constructions Ltd

R. Wadhumal and Sons

M/s Imperial Coastal Infra

Shree Construction Co.

C R R CONSTRUCTIONS