REPAIR/REPLACEMENT OF LT PANEL BOARD UG CABLE AND ALLIED EXTERNAL ELECTRIFICATION WORKS AT VARIOUS LOCATIONS AT OTA ,DAD AND DGQA AREA UNDER GE STM

Amount

Excavating in trenches not exceeding 1.5 metre wide and not exceeding 1.5 metre in depth for foundation of stays & Poles, laying of cables etc and getting out in soft / loose soil all as specified and directed

Returning, filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25 cm using excavated soil all as specified and directed.

Removing excavated material/ surplus soil to a distance not exceeding 50 meters and depositing where directed at a level not exceeding 1.5 meter above the starting point all as directed.

Supply, lay and spread in trenches, river sand including cleaning, spreading, leveling, punning for laying /cushioning of cable all as specified and as directed. Note: Punned thickness shall be measured and paid.

Supply and lay new burnt bricks, old size, sub class 'B' for new cable protection complete all as specified and directed

Removing old bricks from trenches and taken as credit complete all as directed.

Relaying the old bricks in trenches for cable protection including taking out the old one all as specified and directed.

Supply and laying in trenches/poles/wall etc LT UG Cable XLPE insulated with multistranded aluminium conductor armoured with galvanised steel wire / taps 1100 volts grade conforming to IS specifications and including taking out Old unsv cables of following sizes Note:- Lugs and glands are deemed to be included in the rate quoted for laying of cable and to be used wherever required while connecting cables to the panel board. Earth work such as excavation, refilling etc, shall be measured and paid separately under relevant item:-

LT UG Cable 2 core 10 sqmm .

LT UG Cable 4 core 10 sqmm .

LT UG Cable 4 core 16 sqmm .

LT UG Cable 4 core 25 sqmm .

LT UG Cable 3.5 core 35 sqmm .

LT UG Cable 3.5 core 50 sqmm .

LT UG Cable 3.5 core 70 sqmm .

LT UG Cable 3.5 core 120 sqmm .

LT UG Cable 3.5 core 185 sqmm .

Removing the faulty LT UG cable from trenches/poles/wall etc and re-laying/re-routing the same in trenches/poles/wall etc and of following sizes:- Note: Lugs and glands are deemed to be included in the rate quoted for laying of cable and to be used whereever required while connecting cables to the panel board. Earth work such as excavation,refilling etc, and cable joints shall be measured and paid searately under relevant item:-

LT UG cable 2 core 10sqmm to 4 core 25 sqmm.

LT UG cable 3.5 core 35sqmm to 3.5 core 70 sqmm.

LT UG cable 3.5 core 95sqmm to 3.5 core 240 sqmm.

Supply and lay GI tubes, 'light grade' galvanised, with all fittings; of bore of tube 80mm laid in trenches for drawing cables under road/drain crossings etc all as specified and directed

All as per item No.10 hereinbefore but of 50mm bore

All as per item No.10 hereinbefore but of 40mm bore

Supply ,Fabricate, install, connect, test and commissioning LT panel board, powder coated, outdoor weather proof type, compartmentalised fabricated with 3 mm thick CRCA steel and suitable sized pressed steel frame work, top with sloping canopy, bottom with detachable plates, front and rear with hinged type door and locking arrangements, chamber for cable entry and exit , chamber for aluminium busbars, separate compartment for each switch gear, louvers and air vent for natural air flow, holes drilled for connection including suitable angle iron/flat iron frame work/ supports, excavation, earth work, PCC foundation etc., as required with and including following switch gear items internally connected with suitable capacity aluminium strip/ rods insulated, complete mounted on PCC pillars complete all as specified and comprising of the followings:- (i) 4 Nos busbar of equal size of Aluminium conductor with PVC coloured heat shrinkable type sleeves continuous rating of 400 Amps mounted on fibre reinforced insulator.(1set), with LED indication lamps on incoming side. (ii) 3 Phase Flush Mounting Meter, Class 1 meter, 96 X 96 mm 3 Ph 4W 240V 5A (Multifunction meter) Make: L&T /Siemens -1No (iii) INCOMING : Onload change over switch four pole 320 Amps - 01 Nos (IV) OUTGOING :- (a) MCCB fixed thermal magnetic release type of capacity 250 amps, 4 pole, 35 kA.- 1 Nos.

(b) MCCB fixed thermal magnetic release type of capacity 63 amps, 4 pole, 415 Volts, 50 Hz , 16kA, - 1 Nos. (c) MCCB fixed thermal magnetic release type of capacity 63 amps, 4 pole, 415 Volts, 50 Hz , 16kA, - 3 Nos (d) Three phase contactor with timer for security light - 01 Nos. Note : All MCCBs and change over shall be front handle operated.

Supply ,Fabricate, install, connect, test and commissioning LT panel board, powder coated, outdoor weather proof type, compartmentalised fabricated with 3 mm thick CRCA steel and suitable sized pressed steel frame work, top with sloping canopy, bottom with detachable plates, front and rear with hinged type door and locking arrangements, chamber for cable entry and exit , chamber for aluminium busbars, separate compartment for each switch gear, louvers and air vent for natural air flow, holes drilled for connection including suitable angle iron/flat iron frame work/ supports, excavation, earth work, PCC foundation etc., as required with and including following switch gear items internally connected with suitable capacity aluminium strip/ rods insulated, complete mounted on PCC pillars complete all as specified and comprising of the followings:- (i) 4 Nos busbar of equal size of Aluminium conductor with PVC coloured heat shrinkable type sleeves continuous rating of 400 Amps mounted on fibre reinforced insulator.(1set), with LED indication lamps on incoming side. (ii) 3 Phase Flush Mounting Meter, Class 1 meter, 96 X 96 mm 3 Ph 4W 240V 5A (Multifunction meter) Make: L&T /Siemens -1No (iii) INCOMING : Onload change over switch four pole 320 Amps - 01 No. (IV) OUTGOING :- (a) MCCB fixed thermal magnetic release type of capacity 200 amps, 4 pole, 25 kA.- 2Nos.

(b) MCCB fixed thermal magnetic release type of capacity 100 amps, 4 pole, 415 Volts, 50 Hz , 16kA, - 1 No. (c) MCCB fixed thermal magnetic release type of capacity 63 amps, 4 pole, 415 Volts, 50 Hz , 16kA, - 2 Nos. (d) Three phase contactor with timer for security light - 01 Nos. Note : All MCCBs and change over shall be front handle operated.

Supply ,Fabricate, install, connect, test and commissioning LT panel board, powder coated, outdoor weather proof type, compartmentalised fabricated with 3 mm thick CRCA steel and suitable sized pressed steel frame work, top with sloping canopy, bottom with detachable plates, front and rear with hinged type door and locking arrangements, chamber for cable entry and exit , chamber for aluminium busbars, separate compartment for each switch gear, louvers and air vent for natural air flow, holes drilled for connection including suitable angle iron/flat iron frame work/ supports, excavation, earth work, PCC foundation etc., as required with and including following switch gear items internally connected with suitable capacity aluminium strip/ rods insulated, complete mounted on PCC pillars complete all as specified and comprising of the followings:-

(i) 4 Nos busbar of equal size of Aluminium strip conductor with PVC coloured heat shrinkable type sleeves continuous rating of 400 Amps mounted on fibre reinforced insulator.(1set), with LED indication lamps on incoming side. (ii) 3 Phase Flush Mounting Meter, Class 1 meter, 96 X 96 mm 3 Ph 4W 240V 5A (Multifunction meter) Make: L&T /Siemens -1No (iii) INCOMING : MCCB fixed thermal & fixed magnettic setting four pole, 415 volts 250 Amps, 36 KA.-01 No (IV) OUTGOING :- (a) MCCB fixed thermal & fixed magnettic setting four pole, 415 volts 125 Amps, 25 KA. -02 Nos (b) MCCB fixed thermal magnetic release type of capacity 63 amps, 4 pole, 415 Volts, 50 Hz , 16kA, -3 Nos. (c) Three phase contactor with timer for security light - 01 Nos. Note : All MCCBs shall be front handle operated.

Supply ,Fabricate, install, connect, test and commissioning LT feeder pillar box, powder coated, outdoor weather proof type,fabricated with 3 mm thick CRCA steel and suitable sized pressed steel frame work, top with sloping canopy, bottom with detachable plates, front and rear with hinged type door and locking arrangements, with 400A bus bar capacity including suitable angle iron/flat iron frame work/ supports, excavation, earth work, PCC foundation etc., as required with and 4 Nos busbar and connecting of existing cable with proper lugs complete mounted on PCC pillars complete all as specified

M & L for Straight through joints (Tubular sleeve version) Heat Strink Type for making joints suitable for LT XLPE/PVC sheathed armoured heavy duty cables with aluminium conductor of 4 core 25 to 50 sqmm . Make : Raychem or equivalent make as approved by GE

M & L for Straight through joints (Tubular sleeve version) Heat Strink Type for making joints suitable for LT XLPE/PVC sheathed armoured heavy duty cables with aluminium conductor of 4 core 70 to 150 sqmm . Make : Raychem or equivalent of make as approved by GE.

Supply and replace MCCB 4 pole 200 Amps with breaking capacity 36kA, 415 Volts, 50 Hz AC all as directed. Make: Havells/Standard/ L&T

S&F Straight through joints (epoxy) for underground cable including joint kits and labour complete for making joints suitable for LT PVC sheathed / armoured heavy duty cables with aluminium conductor of following sizes :-

LT UG cable 4 core 16 to 35sqmm

LT UG cable 4 core 50 to 95sqmm

Supply and replace MCCB 4 pole 250 Amps with breaking capacity 36kA, 415 Volts, 50 Hz AC all as directed. Make: Havells/Standard/ L&T

M & L for Earthing complete with galvanised steel earth plate electrode of size 60 cm x 60 cm x 6 mm thick buried directly in ground vertically to a depth of not less than 2.25 mtr below normal ground level with top edge of earth plate not less than 1.5 mtr below normal ground level, connected to galvanised iron/steel strip 25X4mm dia by means of bolts, nuts, washers and check nuts made out of galvanised iron, protected by GI pipe light grade suitable size of dia and connected to main control board all as shown in Electrical plate No 5 of MES SSR Part I including necessary excavation and earth work in any type of soil, salt, charcoal dust, PCC 1:2:4 type B1 in chamber, RCC 1:2:4 chamber cover with 6 mm dia MS bar at 100 mm centre to centre both ways and MS 6 mm dia hook complete all as specified and directed.

M & L for Earthing complete with galvanised steel earth plate electrode of size 60 cm x 60 cm x 6 mm thick buried directly in ground vertically to a depth of not less than 2.25 mtr below normal ground level with top edge of earth plate not less than 1.5 mtr below normal ground level, connected to galvanised iron/steel strip 32x6mm dia by means of bolts, nuts, washers and check nuts made out of galvanised iron, protected by GI pipe light grade suitable size of dia and connected to main control board all as shown in Electrical plate No 5 of MES SSR Part I including necessary excavation and earth work in any type of soil, salt, charcoal dust, PCC 1:2:4 type B1 in chamber, RCC 1:2:4 chamber cover with 6 mm dia MS bar at 100 mm centre to centre both ways and MS 6 mm dia hook complete all as specified and directed.

Supply and replace Junction box Hot press Moulded SMC Junction Boxes weather proof type with hinged type door off white colour of size 240x130x110mm comprising of 1 No of 10A SP MCB and 3 Nos connectors and 1 No neutral link complete fixed on pole with suitable clamps, bolts and nuts with fixing arrangements all as specified and directed. Make : Sintex or Equivalent

M&L for removing the existing street light fitting of any type & make and Supply & installation of new street light fittings,60W LED 5700K New generation energy saving & environmental friendly long life versatile pressure die-cast aluminium IP66 roadway luminaries with high power LED as light source in the existing pole duly wired complete all as specified and directed Make:- Havells , Cat part No. LHETBXU7PN6J090 or equivalent in Philips/Wipro

M & L for dismantling and taking down the existing street light fitting led type for repair and replacing the unservicable LED driver with new upto 100W LED 5700K and refixing the same in the existing pole duly wired complete all as specified and directed. Make:- Havells / Philips / Wipro / CG

Supply and laying 1100 volts grade heavy duty cable with PVC insulated aluminium conductor served with an inner sheathing of PVC tape and overall PVC sheathed 3 core 2.5 sq. mm nominal cross section in service connections/strret light connection from junction box to street light fittings.

S & F MCCB 3/4 pole 63 to100 Amps,415 volts with rupturing capacity 16KA. All as specified including taking out old one . Make : L&T/Havells/Legrand

S & F MCCB 3/4 pole 125 Amps,415 volts with rupturing capacity 16 KA. All as specified including taking out old one Make : L&T/Havells/Legrand

Preparation of old surface and painting of steel tubular electric poles above ground level including brackets,clamps etc with good quality silver paint(two coat) complete including writing pole no and all as specified and directed.

Finding and rectification of electrical fault byChecking of external/internal(HT/LT) elect supply feeder, street light feeder,OH conductors /under ground cables using elect tools, equipments and safty devices after arranging elect shut down of feeders from sub station to remove elect faults like tightning of loose connection,removing of any electric short,meggring of cable,excavation of soil for removing of faulty cable on a particular span and relaying of cables after removing of fault, re-tightning of cable lugs etc all as required at site and as directed by Engr in Charge. Note:- (i) The electrician employed for the purpose will be highly skilled along with one mate and should have all necessary tools and safty devices. (ii) Any major materials used for rectification of faults like Cables,MCB/MCCB/cable jointing kits/cables of any type etc will be measured and paid seperately or supplied by department.(iii) Rate including hire of HT fault Locaterany other tools/equipments and Earth Work. works should be completed with in 12 hrs.

Supply and fix PVC insulated and FR PVC Round Sheathed, Copper Conductor (flexible) three core industrial cable, 2.5 sqmm 1100 Volts, conforming to IS: 694. Make : Havells / Finolex/Paragon.

Supply and replace GI pipe bracket for street light fitting any type 40 mm bore light grade 1.5 mtr long bent to shape after taking down unserviceable pipe bracket all as specified and directed

S & F MCB single pole 240 volts, 6 to 32 amps all as directed. Make: Havells /Indo Asian/ Legrand.

Supply and replacemnt LED flood light 120 watts Pressure die cast housing with IP 66 protection Efficient high output emitter LED for better distribution. Make:- Havells/ Crompton/ Wipro/ Philips.

Supply and replacement LED Street light 120 watts with pressure die cast alumimium housing ,high power LEDs, top opening and separate driver compartment with IP 66 protection. Make:- Havells/ Crompton/ Wipro/ Philips.

Supply and replacement LED Street light 90 watts with pressure die cast alumimium housing ,high power LEDs, top opening and separate driver compartment with IP 66 protection. Make:- Havells/ Crompton/ Wipro/ Philips.

Supply and replacement LED Street light 45 watts with pressure die cast alumimium housing ,high power LEDs, top opening and separate driver compartment with IP 66 protection. Make:- Havells/ Crompton/ Wipro/ Philips.

Supply and replacement LED Street light 25/30 watts with pressure die cast alumimium housing ,high power LEDs, top opening and separate driver compartment with IP 66 protection. Make:- Havells/ Crompton/ Wipro/ Philips.

Supply and replacement LED post top made in spun aluminium with high power LEDs and IP65 protection. Make - Havells/ Crompton/ Wipro/ Philips.

Servicing of LT panel board of any size, cleaning of panel board inetrnally and externally, tightening of all screws and nut & bolts, replacing of minor parts like screws, washers, lugs etc, checking of serviceability of all switch gears and replace the following items as required :-

Supply and replace MCCB 4 pole 25-100 Amps with breaking capacity 16kA, 415 Volts, 50 Hz AC all as directed.

All as per item No.40 hereinbefore but of 125 Amps

All as per item No.40 hereinbefore but of 160 Amps

All as per item No.40 hereinbefore but of 200 Amps

All as per item No.40 hereinbefore but of 250 Amps

All as per item No.40 hereinbefore but of 400 Amps

Supply and replace Switch disconnector fuse panel mounting cubicle type three pole and neutral , 50Hz, 415 V, 63 Amps. Make : Havells Cat No. IHKFTF4063 or equivalent model in L&T/Legrand.

All as per item No.46 hereinbefore but of 125 Amps

All as per item No.46 hereinbefore but of 160 Amps

All as per item No.46 hereinbefore but of 200 Amps

Supply and replace 3 Phase Flush Mounting Multifunction Meter,Class 1 meter,96X96 mm , parameter V, A, F, PF. Make : L&T /AE/Legrand.

Supply and replace 3 Phase Flush Mounting Ammeter,Class 1 meter,96X96 mm 3 Ph 4W 240V 5A Make : L&T /AE/Legrand.

Supply and replace 3 Phase Flush Mounting Voltmeter,Class 1 meter,96X96 mm 3 Ph 4W 240V 5A Make :L&T /AE/Legrand.

Supply and replace standard universal LED indicators of colour RYB. Make: L&T /AE/Legrand.

Supply and replace bus bar chamber with 4 Nos aluminium bus bar 200 Amps, 6 way complete all as directed. Make : Havells/Legrand/L&T.

Preparing the old steel painted surfaces of LT panel Board of size upto 3metre width and upto 3metre length and applying one coat of synthetic enamel paint of existing shade / colour complete all as directed.

Servicing of APFC panel of any capacity , cleaning of entire panel inetrnally and externally, tightening of screws, necessary replacement of copper lugs all as specified and directed and checking of serviceability of all accessories and replace the following spares as required:-

Supply and fix phasecap capacitors, 415V 50Hz 10.4 KVAR 3PH Make :-EPCOS Cat No B25667L4197A375 or equivalent of L&T4625

Supply and fix phasecap capacitors,415V 50Hz 5KVAR 3PH Make:-EPCOS Cat No B25667L4926A375 or equivalent of L&T2224

supply and fix capacitor duty Contactor , 3-Pole with AC3 rating 12.5KVAr. Make : Havells/EPCOS/L&T/Legrand.

Supply and fix PVC insulated copper wire single core, 1100volts , 6 sqmm size. Make : Finolex/Havells/Plaza.

Supply and fix MCB triple pole 6-32 A, 230 volts, C series . Make : Havells /Indo Asian/ Legrand.

Material and labour for cutting the existing bituminous road / cement concrete surface 150 mm thick to the required width and depth for laying pipe lines and making good the disturbed area to match with existing complete all as specified.

M&L for cutting and cleaning tree branches 2 M all around the strret light pole all as specified and directed.

M&L Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. as required 25x 4 mm galvanised iron strip as directed.

M&L Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. as required 32x6mm galvanised iron strip as directed.

Servicing of LT ACB of any capacity , cleaning of entire panel inetrnally and externally, tightening of screws, replacement required parts all as specified and directed.

M & L for Straight through joints cold applied insulations and sealing system for making joints suitable for LT XLPE/PVC sheathed armoured heavy duty cables with aluminium conductor off size 4 core 6 to 16 sqmm .

M & L for Straight through joints cold applied insulations and sealing system for making joints suitable for LT XLPE/PVC sheathed armoured heavy duty cables with aluminium conductor of 3.5/4 core 25 to 50 sqmm .

M & L for Straight through joints cold applied insulations and sealing system for making joints suitable for LT XLPE/PVC sheathed armoured heavy duty cables with aluminium conductor of 3.5 core 70 to 95 sqmm .

M & L for Straight through joints cold applied insulations and sealing system for making joints suitable for LT XLPE/PVC sheathed armoured heavy duty cables with aluminium conductor of 3.5 core 120 to 185 sqmm .

M & L for Straight through joints cold applied insulations and sealing system for making joints suitable for LT XLPE/PVC sheathed armoured heavy duty cables with aluminium conductor of 3.5 core 225 to 240 sqmm . Make for serial item Nos 67 to 71.Raychem /M Seal

EVEREST ENGINEERING WORKS

S.M.ELECTRICALS

RKRISHNANANDSONS