Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹9.5 LAccepted-AOC TAMIL NADU | PUDUKKOTTAI | TAMIL NADU | 613301 | L1 | Accepted-AOC L1 | |
| 2 | L2₹11.8 L+₹84,800 (7.77%)Rejected-AOC TUTICORIN TAMIL NADU | TUTICORIN | TAMIL NADU | 626202 | L2 | Rejected-AOC L2 |
| Sl No | Description | Qty | Unit | MENAKA CONSTRUCTION ENGINEERS | A.MURUGAN/GURU ENGINEERING |
|---|---|---|---|---|---|
| 1.00 | Fabrication and supplying of new MS Grill made with outer frame with MS Angle ISA 40x40x6mm angle in all four directions and providing MS flat 32x8mm in equal spacing @ 40mm c/c in transverse direction and MS flat size 32 x 6mm in sine curve pattern spacing at 40mm c/c for base width of 125mm in transverse direction, The rate is inclusive of removal of damaged grills, supply of new grills including fabrication charges, labour, and welding and cutting charges, all wastages, lead, lift, etc., complete and providing one coat of red oxide primer and two coats of enamel paint over the fabricated grill surfaces, transporting charges to site etc., complete a) M.S. Grill 530x 530 mm | 97 | Sets | 5,82,000 ₹6,86,760 Lowest | 6,30,500 ₹7,43,990 |
| 1.20 | B) M.S. Grill 600 x 600 mm | 8 | Sets | 64,000 ₹75,520 Lowest | 66,400 ₹78,352 |
| 2.00 | Fabrication and supplying of new MS Edge angle made up of outer frames seating place ISA 50 x 50x 6mm and MS flat 40x6mm with side support lugs in 8mm MS rod 6 with spacing 50cm c/c with proper welding, rate including removal of damaged edge angle from catchpits, cost of new MS edge angle, Fabrication charges, fixed with 8mm rod lugs securely welded with existing reinforcements, including one coat of red oxide primer and two coats of enamel paint, transporting charges, handling charges etc. complete. a) Edge angle for M.S. Grill 530x 530 mm | 97 | Sets | 2,42,500 ₹2,86,150 Lowest | 2,61,900 ₹3,09,042 |
| 2.20 | b) Edge angle for M.S. Grill 600 x 600 mm | 8 | Sets | 24,000 ₹28,320 Lowest | 28,000 ₹33,040 |
| 3.00 | Fixing in position edgeangle frame in 0m catch pit in Mill and Boiler area of Unit IV & V as per specification which includes dismantling the existing concrete for a width of 110 mm along the trench sides and removal of worn out edge angle frame and damaged grills, the dismantled portion to be filled with micro-concrete using Rendroc RG /Equivalent including neat finishing the top surface including cost of all materials, labour, lead, lift etc., complete. a) Catch pit (0.53m x 0.53m) | 97 | Sets | 1,64,900 ₹1,94,582 Lowest | 1,74,600 ₹2,06,028 |
| 3.20 | b) Catch pit (0.60m x 0.60m) | 8 | Sets | 14,400 ₹16,992 Lowest | 15,200 ₹17,936 |
Tender Value
Refer Docs
EMD Value
₹8,400
Closing Date
6 May 2025, 2:00 pmClosed
Chief Engineer TTPS TTN 4
Office of the SE Civil TTPS TTN 4
Replacement of the damaged Catch Pit MS Grills with edge Angle Frame with New MS Grills and fixing in Catch Pit Grill in Mill, Boiler, ESP areas in Unit 5 0 m level in Power House area
2025_EB_546672_1
CE SE C TTPS Spec. No 77 25 26
Open Tender
Civil Works - Others
Item Rate
60 days
TTPS
Please refer Tender documents.
2 documents required · 2 mandatory
₹0
₹8,400
Yes
11 Sept 2025
16 Apr 2025
7 May 2025
16 Apr 2025
6 May 2025
16 Apr 2025
Fabrication and supplying of new MS Grill made with outer frame with MS Angle ISA 40x40x6mm angle in all four directions and providing MS flat 32x8mm in equal spacing @ 40mm c/c in transverse direction and MS flat size 32 x 6mm in sine curve pattern spacing at 40mm c/c for base width of 125mm in transverse direction, The rate is inclusive of removal of damaged grills, supply of new grills including fabrication charges, labour, and welding and cutting charges, all wastages, lead, lift, etc., complete and providing one coat of red oxide primer and two coats of enamel paint over the fabricated grill surfaces, transporting charges to site etc., complete a) M.S. Grill 530x 530 mm
B) M.S. Grill 600 x 600 mm
Fabrication and supplying of new MS Edge angle made up of outer frames seating place ISA 50 x 50x 6mm and MS flat 40x6mm with side support lugs in 8mm MS rod 6 with spacing 50cm c/c with proper welding, rate including removal of damaged edge angle from catchpits, cost of new MS edge angle, Fabrication charges, fixed with 8mm rod lugs securely welded with existing reinforcements, including one coat of red oxide primer and two coats of enamel paint, transporting charges, handling charges etc. complete. a) Edge angle for M.S. Grill 530x 530 mm
b) Edge angle for M.S. Grill 600 x 600 mm
Fixing in position edgeangle frame in 0m catch pit in Mill and Boiler area of Unit IV & V as per specification which includes dismantling the existing concrete for a width of 110 mm along the trench sides and removal of worn out edge angle frame and damaged grills, the dismantled portion to be filled with micro-concrete using Rendroc RG /Equivalent including neat finishing the top surface including cost of all materials, labour, lead, lift etc., complete. a) Catch pit (0.53m x 0.53m)
b) Catch pit (0.60m x 0.60m)
stage.html
html • 0.04 MB
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .