Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹23.9 LAccepted-AOC | L1 | Accepted-AOC Lowest negotiated tenderer | |
| 2 | L2₹25.1 L+₹90,746 (3.75%)Rejected-AOC | L2 | Rejected-AOC Second lowest tenderer |
Tender Value
₹24 L
EMD Value
₹22,000
Closing Date
29 Feb 2024, 3:00 pmClosed
Superintending Engineer, PWD
O/o. The Superintending Engineer, PWD., Building Maintenance Circle, Chepauk, Chennai-5
Sub Work Rewiring and Renewal of Electrical installations, Fittings, Fans and Power mains to the Tuner workshop at North Chennai ITI, Chennai-21.
2024_PWD_431356_1
PWD/31/BMC/2023-24
Open Tender
Electrical Works
Item Rate
60 days
North chennai ITI, Mint
Refer Tender Document
8 documents required · 8 mandatory
₹0
₹22,000
31 May 2024
28 Feb 2024
29 Feb 2024
28 Feb 2024
29 Feb 2024
28 Feb 2024
Amount
Rewiring with 2 x1.5 sq.mm. (22/0.3) PVC insulated single core unsheathed copper conductor of 1100 V grade in suitable heavy gauge MS conduit pipe on wall and ceiling with MS accessories with Module GI switch box on wall with 6A one way module switch with module front plate with painting of Suitable colour with continuous earth wire connection of 14 SWG TC wire for Open MS conduit Light point / fan point (for electronic regulator) ( 4 points / Coil) Lower End
Rewiringwith 2 x1.5 sq.mm. (22/0.3) PVC insulated single core unsheathed copper conductor of 1100 V grade in suitable heavy gauge MS conduit pipe on wall and ceiling with MS accessories with Module GI switch box on wall with 6A one way module switch with module front plate with painting of Suitable colour with continuous earth wire connection of 14 SWG TC wire for Open MS conduit Light point / fan point (for electronic regulator) ( 5 points / Coil) Lower End
Renewal Wiring with 2 x1.5 sq.mm. (22/0.3) PVC insulated single core unsheathed copper conductor of 1100 V grade in suitable heavy gauge MS conduit pipe on wall and ceiling with MS accessories with suitable Module GI switch box on wall with 1 no. 6A one way module switch and 1 no. 6A 3/2 pin module socket with module front plate with painting of Suitable colour with continuous earth wire connection of 14 SWG TC wire for Open MS conduit Plug point Lower End
Renewal by supply and fixing of Industrial Twin box type fitting with Two nos. 20W LED tubes on conduit pipe suspension from the ceiling with PVC unsheathed copper leads from terminals to the fittings (fittings and bulbs are Philips/ Crompton / Havels/Equivalent Make).
Renewal by Supply and fixing of single box type 4'20W LED tube with TW round blocks on wall or on ceiling with PVC unsheathed copper leads from terminals to the fitting.
Renewal by supply and fixing of 100W IP66 rated LED flood light fitting (philips tempo mini LED floodlight/ eq) on suitable angle iron frame work on wall or Pole with connection complete.
Renewal by Supply and fixing of 1 number 15A 3 pin socket with 15A control switch and 3 numbers 6A 3 pin socket with 6 A switch covered with modular cover plate and with necessary connection. (Switches and plates are of Anchor Roma/Equivalent make)
Renewal by supply and fixing of 1200mm sweep AC ceiling fan complete with 2 module stepped electronic regulator with 6m down rod on the existing clamp with connection complete. (crompton High Speed/Equivalent)
Renewal by Supply and fixing of 600mm Air circulator fan in the existing point on wall with connection complete. (Almonard/Equivalent make)
Renewal by supply and fixing of 15" (375mm) (Heavy duty) AC exhaust fan complete without provision of holes in the wall.
Renewal by supply and fixing of 12 way SPMCB DB with metal door cover with IP42 protection with 40A DP MCB isolatoras incomer and 10 Nos 10A SP MCB as outgoing with neccesary earth connections.
Renewal by Supply and fixing of 8 Way Vertical TPN Distribution board (with MCCB Incomer) Acrylic door,IP63,as per IS8623 III,Impact resistance IK09,Frame MCCB Incomer &Single phase/Three phase MCB’s as outgoing(for power loads exceeding 100A) with 100A 4pole MCB Isolator as incoming and 63A TPMCB- 1No., 32A TPMCB-1 No. and 16A-32A SPMCB - 15 Nos. as outgoing completion connection etc. The above distribution board fixing on suitable Angle iron frame work with wall with earth connection. The MCB DB and MCBs shall be of /Legrand / Hagar/ Equivalent make.
Renewal by Supply and run of 2 of 4 sq.mm. (56/ 0.3) PVC insulated SC unsheathed copper conductor of 1100V grade in suitable heavy gauge MS coundit pipe on wall and ceiling with continous earth wire connection of 14 SWG TC wire with painting of suitable colour
Renewal by Supply and laying of GI hot dip/powder coated 16SWG cable tray with 450mm with and 50mm height on wall with suitable clamps.
Renewal by Supply and clamping of 3 1/2 x 50 sq.mm PVC armoured LTUG Aluminium Cable on wall with MS clamps
Renewal by supply and fixing of brass cable gland suitable for 3 1/2 x 50 sq.mm PVC armoured LTUG alu. Cable with earth connection
Renewal by supply and providing cable end termination of 3 1/2 x 50 sq.mm PVC armoured LTUG Aluminium Cable with necessary aluminium cable sockets by crimping etc. with electrical connection complete
Renewal by Supply and fixing of 32A Four pole MCB in suitable enclosure fixing on wall with earth connection (Hager/Legrand/Equivalent)
U.S. ELECTRICALS
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_512616.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .