Construction of roads using paver blocks in the Paper Mill Colony Ward laying tiles on the roadside berm from Fun Mall to the Camp Office, and constructing roads from the Municipal Commissioner Camp Office via the Petroleum Office etc

Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge.

Demolishing Nominal concrete 1:4:8 or leaner mix (including equivalent design mix) cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge.

Taking out existing CC interlocking paver blocks from footpath/ central verge, including removal of rubbish etc., disposal of unserviceable material to the dumping ground, for which payment shall be made separately and stacking of serviceable material within 50 metre lead as per direction of Engineer-in-Charge.

P/L GSB as well graded uniform layer etc all complete.

Providing and Applying Tack coat with bitumen pressure distributor at of 0.35 kg per SQM on the prepared bituminous surface clean with mechanical broom.

Providing and laying dence graded bituminus macadam with higher capacity HMP using crushed aggregates of specified grading premixxed with bituminus binder @ 4.5 per cent by weight of total mix and filler, transporting the hot mix work site, laying with a hydrostatics paver finisher to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achived the desired compaction as per MORTH specifcation clause no-505 complete in all respects.

BC with Waste Plastic additive: Providing and laying Bituminous concrete using crushed stone aggregates of specifiled grading. premixed with bituminous binder and filler, transporting the hot mix to work site by tippers, laying with paver finisher equlped with electronic sensor to the requlred grade, evel and alignment and rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction and density as per specification, complete and as per directions of Engineer-in-charge

Providing and applying 2.5 mm thick road marking strips (retro- reflective) of specified shade/ colour using hot thermoplastic material by fully/ semi automatic thermoplastic paint applicator machine fitted with profile shoe, glass beads dispenser, propane tank heater and profile shoe heater, driven by experienced operator on road surface including cost of material, labour, T&P, cleaning the road surface of all dirt, seals, oil, grease and foreign material etc. complete as per direction of Engineer-in-charge and accordance with applicable specifications

S/L of 80mm thick rubber mold interlock tiles at sand base etc all complete.

Relaying Of Interlocking Tiles etc all complete.