CERTAIN REPAIR TO EXTERNAL/INTERNAL PLASTER, REPAIR/REPLACEMENT OF KITCHEN CUPBOARD, DRAPERY RODS, VENTILATORS ETC AND OTHER MISC WORKS/CERTAIN REPAIR TO ALUMINIUM DOOR,WINDOW,CEILING,SANITARY FITTINGS AND OTHER ALLIED B/R WORKS AT AIR FORCE STN SGR

Amount

S&F in repair Anodised aluminum frame/shutter for doors, windows, ventilators with one or more rebates including joining cleats for fixing etc. in repairs complete all as specified and directed by Engineer-in-Charge

S&F in repair sheet glass 5.5mm thick, ordinary quality and glazing with aluminium glazing clips and rubber neosprine gasket in square or rectangular, complete all as specified and directed by Engineer-in-Charge.

S&F in repair sheet glass 3mm thick, ordinary quality and glazing with oil putty/wooden beads in square or rectangular in section n exc 0.5 sq.m in each pane complete all as specified and directed by Engineer-in-Charge.

M&L for galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm fixed with tinned tack or galvanised wire staples or fixed with nails and wooden beads, complete all as specified and directed by Engineer-in-Charge.

S & F in repairs Figured Glass pin head type 4mm thick n exc 0.5 Sqm and glazing with oil putty, Complete all as specified and directed by Engineer-in-Charge

S&F in repair Butt hinges, cast brass, with Aluminium alloy galvanised mild steel hinge pin, bright polished and fixed type B-11 complete all as specified and directed by Engineer-in-Charge

S&F in repair Brass Mortice lock, vertical type, size 100 mm , 2 levers complete all as specified and directed by Engineer-in-Charge

S&F in repair Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring fixed in floor all as specified and directed by Engineer-in-Charge

S&F in repair Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty complete all as specified and directed by Engineer-in-Charge

S & F for Aluminium, anodised, barrel tower bolts 150mm size of extruded section, complete all as specified and directed by Engineer-in-Charge.

S & F for Aluminium alloy, anodised, sliding door bolt 300mm length with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy, complete all as specified and directed by Engineer-in-Charge

S & F for But hinges, medium weight, cold rolled mild steel 100mm size, complete all as specified and directed by Engineer-in-Charge

S & F for Aluminium handles, cast type, anodised 150mm size complete all as specified and directed by Engineer-in-Charge

M & L for Anodised aluminium door shutters, aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading, screws etc. complete all as specified and directed by Engineer-in-Charge.

M & L for Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.) hinge type B-21 100mm long (2 no.) suitable handle (1 no.), complete all as specified and directed by Engineer-in-Charge.

Taking down Chowkats or frames with shutters (without taking off shutters from the frames) n exc. 1.5 sqm and credited to the contractor all as specified and directed by Engineer-in-Charge

Taking down Chowkats or frames with shutters (without taking off shutters from the frames) exc. 1.5 sqm but n exc 4 Sqm each and credited to the contractor all as specified and directed by Engineer-in-Charge

Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and directed by Engineer-in-Charge.

M & L for Providing and fixing GI power coated frame work for Gypsum board ceiling comprising of GI perimeter chennel 0.55mm thick with two unequal flanges of 20 and 30mm and web of 27mm fixed to surrounding wall using nylone sleeves and screws at 450mm centre to centre/ intermediate channel 0.9mm thick having two equal flanges of 15mm each and web of 45mm susoended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exceeding 1.2m length) of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with clips of 10.5mm fixed to the intermediate channel at 457mm centre to centre, fixed in repairs, complete all as specified and directed by Engineer-in-Charge.

M & L for second class hardwood fillets bullnosed, splayed, chamfered or rounded on one edge or face of exc 13 Sqcm but not exc 25 sqcm in repairs, secured with nails or screws in repairs , complete all as specified and directed by Engineer-in-Charge.

M & L for second class hardwood plain fillets, square or rectangular or triangular in section clean sawn exc 6 Sqcm but not exc 13 sqcm in repairs, secured with nails or screws in repairs ,complete all as specified and directed by Engineer-in-Charge.

M &L for providing and fixing Gypsum Board 12mm thick in ceiling fixed with screw, fixed to timber framework or suspended GI frame, as per manufacturer instruction, complete all as specified and directed by Engineer-in-Charge.

M&L for 6mm thick Non asbestos fibre cement building fixed or laid/inserted to timber/GI/Aluminium framework with screws to ceiling flat or sloping complete all as specified and directed by Engineer-in-Charge.

M&L for preparation of new or previouly untreated plaster/ AC sheet surfaces of ceiling including cornices and applying two coats of oil bound distemper colour/tint complete all as specified and directed by Engineer-in-Charge.

Dismantling floor, hearth or wall tilling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed by Engineer-in-Charge.

M&L Screed bed or bedding layer 15mm thick in cement mortar 1:6 for laying floor finishes complete all as specified and as directed by Engineer-in-Charge.

M & L for non skid joint free coloured ceramic tiles 7 to 8 mm thick area of each tile exc 0.11 sqm but n exc 0.18 sqm in floor etc set and jointed in neat cement slurry and pointed in white/coloured cement to match, Complete all as specified and directed by Engineer-in-Charge.

M & L for double charged Vitrified coloured tiles 7-10mm thick dark shad (Square/ Rectangular) polished area of each tile not exceeding 0.36 Sqm in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed by Engineer-in-Charge.

M & L for glazed ceramic (digital glossy finish) coloured tiles 450x300x7 mm thick on vertical surfaces, alongwith high lighter tiles set and jointed in neat cement slurry and pointed in white/colour cement to match over, Complete all as specified and directed by Engineer-in-Charge.Make:

Taking up or down steel water tubing 15mm bore and connection complete all as specified and directed by Engineer-in-Charge.

Refixing of old steel tubing and connection in new or old position of 15mm bore. complete all as specified and directed.

S & F GI tubes 15 mm bore 'medimum grade' with all fittings and fixed complete to walls and ceilings or laid in trenches or cutting chases in wall and making good to disturbed portion of wall complete all as specified and directed by Engineer-in-Charge.

Taking up or down steel water tubing and connection complete 20 mm bore complete all as specified and directed by Engineer-in-Charge

Refixing of old steel tubing and connection in new or old position of 20mm bore. complete all as specified and directed.

S & F Steel water tubing galvenised 20mm bore medium grade with all fittings and fixed to walls, ceiling or laid in floor complete all as specified and directed by Engineer-in-Charge

M & L for Lagging to pipes 20mm bore used in external water supply or plumbing all around with 25mm thick bonded mineral wool pre-formed ‘SNAP ON’ pipe sections of density 144 Kg /Cum conforming to IS 9842 provided with chicken mesh wire netting 25mm gauge 20mm mesh complete all as specified and directed by Engineer-in-Charge

S&F in repairs vitreous china ware wash hand basin white flat back, size 630x450 mm including brackets complete all as specified and directed by Engineer-in-Charge.

S & F tubular towel rail 600mm long of brass CP including brackets, fixed with chromium plated brass screws and wooden/plastic cleats (Minimum weight 190gms), complete all as specified and directed by Engineer-in-Charge.

S & F for chromium plated towel ring of minimum dia 200mm fixed in repairs, Complete all as specified and directed by Engineer-in-Charge

S & F in repair for chromium plated steel grating of maximum dia 150mm with or without hole Complete all as specified and directed by Engineer-in-Charge

S&F in repair PVC waste pipe flexible for WHB of 32mm size complete all as specified and directed by Engineer-in-Charge.

S & F for CP Jet Spray of Standard size for EWC alongwith CP connection and all fittings as fixed in repairs, Complete all as specified and directed by Engineer-in-Charge.

S & F in repair for Kitchen sinks with drainage board made of stainless steel 1 mm thick with plugs washers and waster including beeding in cement mortar on to dwarf wall or influding fixing cantilever brackets and connecting union to pipe overall size 915mm x 460 mm bowl size 410 mm x 330 mm x 160mm in repair, Complete all as specified and directed by Engineer-in-Charge.

Demolition of brickwork or stone/boulder masonry, build in cement mortar including all quoins, arches, pillars etc, but excluding ashlars facings, dressed stonework and precast concrete articles complete all as specified and directed by Engineer-in-Charge

M & L for Brick work with sub class `B' bricks straight or curved on plan exc 6m mean radius with old size bricks built in cement mortar 1:6 complete all as specified and directed by Engineer-in-Charge

M & L for Brick work with sub class `B' bricks straight or curved on plan exc 6m mean radius with old size bricks built in cement mortar 1:6, Except Bricks, complete all as specified and directed by Engineer-in-Charge

Taking down cement or cement lime plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed by Engineer-in-Charge.

M&L Rendering 15mm thick in CM 1:6 on fair faces of brick work or concrete surfaces and finishing even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge.

M&L Rendering 15mm thick in CM 1:4 on fair faces of brick work or concrete surfaces and finishing even and smooth without using extra cement with waterproofing compound complete all as specified and directed by Engineer-in-Charge.

M & L for preparation of newly plastered surfaces of walls and applying two coats of distemper oil emulsion paint colour tint as ordered in any pattern complete all as specified and directed by Engineer-in-Charge

M & L for preparation of newly plastered surfaces of walls and applying two coats of cement base paint colour tint as ordered in any pattern complete all as specified and directed by Engineer-in-Charge

M&L for preparation of old or previously untreated steel surfaces of any description, over 10cm in width or girth, not otherwise described and applying one coats of synthetic enamal paint over a coat of red oxide primer complete all as specified and directed by Engineer-in-Charge.

S&F in repair, Vitreous china squating pan, orissa pattern size 580 x 440mm and making good, including connection to trap, and to flushing pipe, anti-syphonage pipe, etc., including trap set in and including concrete Complete all as specified and directed by Engineer-in-Charge. Make: Cera/Prayag

S & F in repairs wash down water closet (EWC) white with P or S trap including Flush pipe of polyethylene of low or high density of PVC, 32 mm dia, for low level cistern and plastic water closet seat & cover mild steel chromium plated or aluminised hinging device and connection to low level flushing cistern and flush pipe, etc complete all as specified and directed by Engineer-in-Charge. Make: Cera/Prayag

S & F in repairs PVC connections 15mm size with PTMT nuts of length 450mm, complete all as specified and directed by Engineer-in-Charge.

S & F in repairs PVC valveless, syphonic action type, flushing cistern, low level 10 ltr capacity, white, with inlet, ball valve, float and handle including brackets, complete all as specified and directed by Engineer-in-Charge.

S&F in repair 75mm bore dia PVC floor trap(SWR) plain with grating including jointing with solvent cement to waste pipe complete all as specified and directed by Engineer-in-Charge.

S&F in repair 75mm bore PVC(SWR) door bends any radius provided with access door complete all as specified and directed by Engineer-in-Charge.

S&F 75mm bore PVC (SWR) junction single (Single T) equal or unequal with access door complete all as specified and directed by Engineer-in-Charge.

S&F 110mm bore PVC (SWR) junction single (Single T) equal or unequal with access door complete all as specified and directed by Engineer-in-Charge.

S&F in repair 110mm bore PVC (SWR) junction double (double T) equal or unequal with access door complete all as specified and directed by Engineer-in-Charge.

S&F in repair 125/110mm bore PVC (SWR) 'P’ trap complete all as specified and directed by Engineer-in-Charge.

S&F in repair 110mm PVC (SWR) reducers complete all as specified and directed by Engineer-in-Charge.

S&F in repair 75mm PVC (SWR) vent cowl complete all as specified and directed by Engineer-in-Charge.

S&F in repair 75mm bore PVC(SWR) pipes single socketed , in any length with rubber ring joints, laid in trenches or in floors and fixed to wall with PVC holding clamps complete all as specified and directed by Engineer-in-Charge.

S&F in repair 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall incl PVC holding clamps complete all as directed by Engineer-in-Charge.

S & F in repairs rotational moulded PVC water storage tank 500 ltr cap (cylindrical vertical with closed top) hoisted & fixed in position, complete all as specified and directed by Engineer-in-Charge.

S & F in repairs rotational moulded PVC water storage tank 1000 ltr cap (cylindrical vertical with closed top) hoisted & fixed in position complete all as specified and directed by Engineer-in-Charge.

S & F Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball screwed for iron pipe 20mm bore and fixed (Minimum weight 15mm-142 gms) complete all as specified and directed by Engineer-in-Charge.

S & F in repairs 15 mm bib tap CP fancy type screwed down screwed for iron pipe or for brass ferrulefancy typr complete all as specified and directed by Engineer-in-Charge.

S & F in repairs fancy type pillar tap cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks and fly nuts, screwed for iron pipe 15mm bore complete all as specified and directed by Engineer-in-Charge.

S & F in repairs CP angle/stop valve of cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed 15 mm bore complete all as specified and directed by Engineer-in-Charge.

S & F for CP Health faucet fixed in repairs with spring action and lever along with health focet long pvc/cp chain 1.2 mtr for supply of water fitted in the existing water connection in the toilets, Complete all as specified and directed by Engineer-in-Charge.

S & F in repairs 15mm dia Brass CP central hole basin mixer with 450mm braided connection pipe (without pop-up) for mixing hot & cold water fixed in repairs, complete all as specified and directed by Engineer-in-Charge.

S & F in repairs 15mm dia Brass CP wall mixer for mixing hot & cold water fixed in repairs, complete all as specified and directed by Engineer-in-Charge. Make: Cera/Prayag/Jaquar

S & F in repair 15mm dia Brass CP Sink mixer (wall mounted) for mixing hot & cold water ,complete all as specified and directed by Engineer-in-Charge.

Demolition of Cement Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed by the Engineer-In-Charge.

M&L for 75mm thick cement concrete (1:3:6) type C-1 using 20mm graded stone aggregate as in plinth protection joint filled with bitumen sand mixer 50mm thick finished even and smooth without using extra cement, complete all as specified and directed by the Engineer-In-Charge.

M & L for rendering 10 mm thick on brick or concrete surface of ceiling finished fair & even in CM 1:3 complete all as specified and directed.

M & L preparation of newly plastered surfaces of ceiling and applying three coats of white wash on ceiling, complete all as specified and directed.

M & L preparation of newly plastered surfaces of wall and applying three coats of white wash, complete all as specified and directed.

M&L Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including 20mm thick screed bed in CM (1:6) for laying of Granite slab& pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including half moulding of granite edges complete all as specified and directed.

M & L for 25mm thick PCC 1:2:4 type B-0 (using 12.5mm graded stone aggregate) as in sub base floor complete all as specified and directed.

S&F in repair Steel plate rack made of stainless steel 1 mm thick over all size 600mm x 750mm complete all as specified and as directed by Engineer-in-charge

S & F 75mm dia cast iron floor trap with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4 ) complete all as specified and as directed by Engineer-in-charge

S&F in repair sinks board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and waste; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm, complete all as specified and directed.

S&F in repair grating doom 100mm dia size with PTMT complete all as specified and directed.

Cutting chases pinning in making good to facing where required and pointing in cement mortar (1:3) for concealed water tubing in brick walls cutting n.exc 10 cm girth. complete all as specified and directed.

Steel windows made of MS sheet 1.25 mm thick box type (primer coated) ERW hollow ‘P’ section of size 60 mm x 25 mm single rebate comprises of skeleton shutter ERW sec 50 x 20 mm & 1 mm thick & openable leaf consisting two Nos sash bars of ‘T’ section 20 x 3 mm complete welded to frame including cutting holes & making good dismantled portion in PCC 1:2: 4 type B-1 four Nos for each window including following fitting welded to shutter ;- (a) Hold fast 150 mm long 12 mm x 3 mm made to shape -04 Nos (b) Handle of ‘Z’ section 20 x 25 mm , 100 mm long 01 Nos each leaf. (c) MS tower bolt 150 mm long 02 Nos each leaf. (d) ‘Z’ section 20 x 25 mm , 100 mm stopper-01 Nos each leaf. (e) Cleat 55 mm long of hollow square 15 x 20 x 63 mm welded to hinges-01 Nos per leaf. (f) MS box type hinges of size 75 x 12 mm -02 Nos per leaf. (g) Fabrication & fixing complete, all specified and directed.

All as per above serial Item No. 90 but but with out sash bars complete all as specified and directed .

S & F Steel windows or ventilators, fixed type, with glazing bars complete all as specified and directed .

Factory made PVC solid single door frame (chowkats) of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube, supplying and fixing in opening all as specified in SSR part-II 2004 Section-8, clause 8B.3 to 8B.3.2 and shown on drawing in page No 150 of SSR part-II 2004. complete all as specified and directed .

Factory made PVC cupboard shutter flush type of 22 mm thick consisting of panel of hollow PVC profile section of 12 mm thickness consisting of M S frame made out of MS tubes of 19 gauge thickness and size of 12 mm x 12 mm inserted all around the hollow profile section and insert one 12 mm x 12 mm MS tube in the centre of this section and lipped with 10 mm (5 mm x 2) thick and 12 mm wide on stiles and rails using solvent cement the inner panel shall be laminated with 5 mm thick termite proof, water proof and fire retardant printed PVC sheet using solvent cement on both the sides of the panel. The front side of the panel visible in the front of the cupboard to be edge bonded using 20 mm x 1 mm thick PVC leaping on both the edges with locking arrangements of both panel etc complete all as specified and as directed by Engineer-in-charge.

Factory made PVC shelf of 22mm thickness consisting of panel of hollow PVC profile of 12mm thickness consisting of M S frame made out of M S tubes of 19 gauge thickness and size of 12mmx12mm inserted all around the hollow profile section and insert one 12mmx12mm M S tube in the center of this section and lipped with 10mm(5mmx2)th and 12mm wide on stiles and rails using solvent cement.The inner panel shall be laminated with 5mm th termite proof water proof and fire retardent plan PVC sheet using solvent cement on both the sides of panel.The front side of the partition visible in the front of the cupboard to be edge bonded using 20mmx1mm th plain PVC Leeping on both edges etc. complete all as specified and directed .

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or bricks surrounds, glazed with putty or fixed with beads pane, complete all as specified and directed .

S&F 125 mm size, aluminium anodized handles, cast type complete all as specified and directed by Engineer-In-Charge.

M&L Preparation of new steel surfaces of any description not otherwise described over 10cm width or girth and applying two coat of synthetic enamelled paint over one coat of red oxide primer.

M&L for Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165, complete all as specified and directed by Engineer-In-Charge.

Taking down, easing, adjusting of old wooden shutters of any description exc. 1 Sq,m and not exc. 2 Sq.m each and refixing in same opening after tiling work complete all as specified and directed by Engineer-In-Charge.

S&F Magnetic type catch fixed with screws to door frame complete all as specified and directed by Engineer-In-Charge.

S&F stainless steel hinge of size 60mm self-closing superior quality suitable for cabinet and shelves opening/ closing operation (fancy type) complete all as specified and directed by Engineer-In-Charge.

S&F Drapery rod, fancy type made of MS tube 20 mm dia having PVC powder coated covering of colour as approved by GE, as in curtain rods including taking down the old unserviceable pelmet box/curtains rods complete all as specified and directed by Engineer-In-Charge.

S & F PVC finols for curtain rods complete all as specified and directed by Engineer-In-Charge.

S & F of stainless steel handle fancy type 100mm size, complete all as specified and directed by Engineer-In-Charge.

S & F 100 mm size hasp and staple, mild steel wire type stove enameled black including bolt to hinge plate and fixed with screws in repairs complete all as specified and as directed by Engineer-in-Charge.

M&L for pre-laminated particle board 18mm thick, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work, complete all as specified and directed by Engineer-In-Charge.

M&L for french polishing on surface of any description width or girth including cleaning and preparing the surface including a coat of wood filler on new works with two or more coats ,complete all as specified and directed by Engineer-In-Charge.

S & F stainless steel roller of size 25mm x 12mm, 450mm length with male female rolling brackets suitable for baskets complete all as specified and directed by Engineer-In-Charge. Make: Evershine, Olive or equivalent.

S & F stainless steel perforated basket of size 520mm width, 485mm depth and 100mm height complete all as specifed and directed by Engineer -in -charge. Make: Evershine, Sleek or equivalent

S & F stainless steel holding basket of size 520mm width, 485mm depth and 100mm height complete all as specified and directed by Engineer-In-Charge. Make: Evershine, Sleek or equivalent

S & F stainless steel superior quality pull out basket of size 100mm width, 485mm depth and 430mm height complete all as specifed and directed by Engineer -in -charge. Make: Evershine, Sleek or equivalent

S & F stainless steel superior quality plain basket of size 520mm width, 485mm depth and 150mm height complete all as specifed and directed by Engineer -in -charge. Make: Evershine, Sleek or equivalent

S & F stainless steel superior quality pull out basket of size 810mm width, 485mm depth and 200mm height complete all as specifed and directed by Engineer -in -charge. Make: Evershine, Sleek or equivalent

S & F stainless steel superior quality cylinder removal mesh of size 200mm width and 100mm height complete all as specifed and directed by Engineer -in -charge. Make: Evershine, Sleek or equivalent

M/S FAROOQ AND SONS

M/S Abdul Ahad Rather