DAY TO DAY COMPREHENSIVE MAINT OF BR/EM WORKS ,REPAIR TO CERTAIN BR ITEMS OF NP BLDGS, REPAIR / MAINT OF HELIPAD AT SITE P AND REPAIR TO BR CERTAIN WORKS AT AF STN KANHERI HILLS UNDER GE AF THANE

Amount

Taking down chowkhats or frames not exc 1.5 sqm with shutters (without taking off shutters from the frames) complete all as specified and as directed by Engineer-in-charge

Taking down door Chowkat Exc 1.5 sqm but not exc 4 sqm each (without taking off shutters from the frames) complete all as specified and as directed by Engineer-in-charge

Taking down Shutters of any description n exc 1 sqm each complete all as specified and as directed by Engineer-in-charge

Taking down Shutters exc 1 sq. m and n exc 2 sq. m each complete all as specified and as directed by Engineer-in-charge

Repairs to shutters of any description n. exc 1 sqm each easing & adjusting without taking down complete all as specified and as directed by Engineer-in-charge

Repairs to shutters of any description easing & adjusting without taking down area exc 1 sqm but n. exc 2 sqm complete all as specified and as directed by Engineer-in-charge

S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge

S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions of Engineer-in-charge.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, supplying & fixing in opening as per specification & drawing complete all as specified and as directed by Engineer-in-charge

S&F Factory made solid panel pace door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel heaving a PVC sheet strip of 20mm width suck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing.

S&F IInd class hard wood plain, solid, straight chowkat and frame wrought framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints ,complete all as specified and as directed by Engr-in-charge.

S&F in for 35mm thick IInd class hard wood glazed and skelton shutters divided into squares with plain chamfered or reounded miltred and related sash bars number to received glass gauze etc edges of framing plain chamfered or reounded fitted with cut and mitred beads for securing glass etc size of members of shutters as specified in SSR Part-I section 8 clause 8.20(a) supplied and fitted to chawkats ,complete all as specified and as directed by Engr-in-charge.

S&F for 30 mm thick IInd class hard wood glazed and skelton shutters divided into squares with plain chamfered or reounded miltred and related sash bars number to received glass gauze etc edges of framing plain chamfered or reounded fitted with cut and mitred beads for securing glass etc size of members of shutters as specified in SSR Part-I section 8 clause 8.20(a) supplied and fitted to chawkats ,complete all as specified and as directed by Engr-in-charge.

S&F for 35mm thick IInd class HW rail and style plain framed panelled factory made shutter (Two panel) with lock rail and panel of 9mm BWP,commercial ply or 12mm veneered particle beard with commercial veneering on both faces. The size of rail and stile as per IS :1003 (Part-I) kiln and chemically pressure treated ,complete all as specified and as directed by Engr-in-charge.

S&F 40mm thick Flush shutters,solid core construction,with block board core and one face plywood face commercial type panels, other face is covered with decorative face veneer with lipping/frame to match etc ,complete all as specified and as directed by Engr-in-charge.

S&F 30mm thick Flush shutters,solid core construction,with block board core and plywood face panels,commercial type on both sides etc ,complete all as specified and as directed by Engr-in-charge.

M&L for Cutting holes in brick walls exc half bricks but nexc one brick built in cement mortar or cement lime mortar for inserting holdfasts and making good dismantled portion in cm (1:3) or cement concrete (1:2:4) type B1 as required complete all as specified and as directed .

S&F aluminium anodized barrel tower bolt extruded section and fixed 200mm long complete all as specified and as directed .

S&F aluminium anodized barrel tower bolt extruded section and fixed 150mm long complete all as specified and as directed .

S&F extruded aluminium alloy handles 100mm fabricated type, anodised complete all as specified and as directed by Engineer-in-charge

S&F extruded aluminium alloy handles 150mm fabricated type, anodised complete all as specified and as directed .

S&F Aluminium alloy, anodised, sliding door bolt with hasp, 300mm long staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium Alloy and fixed complete all as specified and as directed .

S&F in repair door sliding bolt aldrop 300mm long aluminum anodised all as specified and as directed by Engineer-in-charge ( Make-classic/Shalimar.)

S&F Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) 250mm length and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed all as specified.

S&F but hinges stainless steel 100mm long complete all as specified and as directed .

S&F in repair but hinges stainless steel 100mm long complete all as specified and directed by Engr-In-Charge.

S&F Mild steel 300mm ordinary rat tail rod pettern springs including roller and roller plate complete all as specified and as directed by Engineer-in-charge

S&F in repair mild steel 300mm ordinary rat tail rod pettern springs including roller and roller plate complete all as specified and as directed by Engineer-in-charge

S&F Mild steel 300mm ordinary rat tail rod pettern springs including roller and roller plate complete all as specified and as directed by Engineer-in-charge.

S&F in repair mild steel 300mm ordinary rat tail rod pettern springs including roller and roller plate complete all as specified and as directed by Engineer-in-charge.

M&L for preparation of new wood surfaces of any description over 10cm width of girth applying two coats of synthetic enamel paint over coat of pink primer etc ,complete all as specified and as directed by Engineer-in-charge.

M&L for preparation of old wooden surfaces of any description over 10cm width & girth not otherwise described and applying a coat of synthetic enamel paint complele all as specified

M&L for preparation of new wood surfaces of any description over 10cm width of girth applying two coats of synthetic enamel paint over coat of pink primer etc ,complete all as specified and as directed by Engr-in-charge.

S&F in repair Stainless steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18 mm and fixed with stainless steel wire staples complete all as specified and as directed by Engineer-in-charge

M&L for Hacking out old broken glass (any thickness, size, quality or description) from wooden, metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones complete all as specified and as directed by Engineer-in-charge

S&F sheet glass ordinary quality 4.00mm thick and glazing with oil putty in squares n.exc 0.5 sqm in each pane complete all as specified and as directed by Engineer-in-charge.

S&F sheet glass ordinary quality 6.30 mm thick and glazing with oil putty in squares exc 0.5 sqm in each pane complete all as specified and as directed by Engineer-in-charge

S&F figured glass, pin-head type 4.00 mm thick and glazing with oil putty in squares n.exc 0.5 sqm in each pane complete all as specified and as directed by Engineer-in-charge

S&F in repair floor door stopper of aluminium alloy body and tongue anodised with hard drawn steel spring fixed in floor with overall length of cover plate 140mm complete all as specified and as directed by Engineer-in-charge

S&F in repair magnetic catches MS body and striking plate with aproved quality complete all as specified and as directed by Engineer-in-charge

S&F in repair continuous (Piano) hinges, Stainless steel bright finish or electrogalvanised width of flaps (when open) in 40mm complete all as specified and as directed by Engineer-in-charge

S&F Stainless steel soft close hydraulic action hinge with capacity to take load of 12 to 20 mm thick board all as per directed and specified by engr-in-charge

S&F in repairs aluminium door closer hydraulically reguleted, designation No. 3 univarsal type aluminium extruded body suitable for door shutters of 851 to 1000mm in width and weight between 61 to 80 kgcompete all as specified as directed by Engineer -in -charge

S & F in repairs Double action floor door spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, with stainless stell cover governing pivot made of brass, other parts made of mild steel heavy duty and fixed to aluminium door shutters including making cavities on floor for embedding the floor door springs flush with floor and making good disturbed area compete all as specified as directed by Engineer -in -charge

Dismantling of Stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in dry mortar complete all as specified as directed by engineer-in-charge

M&L machine cut cudappa stone slab 20-25 mm thick over cement screed base as in jambs and soffits of lintel laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab incl rubbing and polishing including 10mm thick rendering in CM1:6 complete all as specified and as directed by Engineer-in-charge

S&F in repair stainless steel kitchen Rack suitable for housing 10 plate of size 30''x 30''x10'' complete all as specified and as directed by Engineer-in-charge

S&F in repair Drapery curtain rod/ Harrison rails of anodised aluminium alloy complete with MS brackets golden colour rings and sode caps fixed in position by drilling holes in walls and fixed the brackets with rawl plug and steel screw complete all as specified and as directed by Engineer-in-charge

S&F in repair 15mm two way bib cock for health faucet complete all as specified and as directed by Engineer-in-charge.

S&F in repair PVC connections 15mm size with PTMT nuts of length 600mm complete all as specified and as directed by Engineer-in-charge

Taking up or down 15mm dia steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and as directed by Engineer-in-charge

Taking up or down 20mm dia steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and as directed by Engineer-in-charge

M&L for galvanised iron tube 20mm dia medium grade with all fitting and fixtures such as bends, elbows, tees, shorts pieces, back nuts, connectors complete all as specified and as directed by Engineer-in-charge

Refixing old 20mm dia steel tubing and connections in new or old position (Walls, ceiling, floors, etc.) complete all as specified and as directed by Engineer-in-charge

Refixing old 15mm dia steel tubing and connections in new or old position (Walls, ceiling, floors, etc.) complete all as specified and as directed by Engineer-in-charge

M&L for galvanised iron tube 15mm dia medium grade with all fitting and fixtures such as bends, elbows, tees, shorts pieces, back nuts, connectors complete all as specified and as directed by Engineer-in-charge

S&F in repair PVC cabinet mirrors of size 550x400x75mm including necessary shelves made of PVC sheets of minimum 5mm thick and mirror fixed on the front side of the shutter complete all as specified as directed by engineer-in-charge (Make- Neelkamal,Prayag,Supreme)

S&F in repair stop valves 15mm dia fancy type chromium plated, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed ,complete all as specified and as directed by Engr-in-charge.

S&F in repair Bib taps, fancy type , cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified as directed by engineer-in-charge

S&F in repairs bib tap 15mm bore chromium plated cast copper alloy with crutch or butter fly handle but fancy type screwed down screwed for iron pipe complete all as specified and directed.

S&F in repair Bib tap standard of PTMT (Minimum weight 15mm-90gms/20mm- 125gms) any colour high pressure screwed for iron pipe and fixed ,complete all as specified and as directed by Engr-in-charge.

S&F in repair brass CP brass shower rose with swivel joint 125 mm size all as specified in repairs complete all as specified as directed by engineer-in-charge

S&F in repair brass CP Tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified as directed by engineer-in-charge

S&F in repair sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and as directed by Engineer-in-charge

S&F Grating doom 100mm dia of PTMT (Min weight 25gms) complete all as specified

S&F Grating doom 125mm dia with waste hole of of PTMT (Min weight 40 gms) complete all as specified.

S&F in repair sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and as directed by Engineer-in-charge

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises ,complete all as specified as directed by Engineer-in-charge.

M&L cement concrete 75mm thick type B-1 1:2:4 using 20mm graded stone aggregate) as in floors etc complete all as specified

M&L cement concrete 40mm thick type B-1 1:2:4 using 20mm graded stone aggregate) as in sub base of floors etc ,complete all as specified as directed by Engineer-in-charge.

M&L for coloured glazed ceramic tiles in vertical surface 350x 250x 7 mm / 450X 350X 7mm thick set and jointed in neat cement slurry over and included 10mm thick bedding layer/ backing coat in CM 1:4 and pointed in white or colour cement to match ,complete all as specified as directed by Engineer-in-charge.

M&L for Non - skid Ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick 1:6 CM screed bed or bedding layer for laying floor finishes ,complete all as specified as directed by Engineer-in-charge.

M&L for Non - skid Ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick 1:6 CM screed bed or bedding layer for laying floor finishes complete all as specified as directed by engineer-in-charge

M&L Vitrified ceramic tiles light shade 10mm thick square/ractangular) polished area of each tiles n.exc 0.36 sqm in floors set and jointed in and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick 1:6 CM screed bed or bedding layer for laying floor finishes complete all as specified as directed by engineer-in-charge

S&F in repair Vitreous China wash down water closet pan (pedestal pattern), white including, seat and cover, connection to trap, and to flushing pipe, anti-syphonage pipe, etc. complete including making good to floor (excluding fixing bolts, flushing cistern and flush pipe) complete all as specified as directed by engineer-in-charge

S&F in repair 10 ltr capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets, flush pipe complete all as specified as directed by Engineer-in-charge

S&F in repair Vitreous China wash basin, white, flat back, size 550x400mm including brackets, cutting for and pinning in ends of brackets or erecting stand, CP waste fitting and PVC waste pipe complete all as specified as directed by Engineer-in-charge

S&F in repair vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) including, connection to trap, complete all as specified as directed by Engineer-in-charge

S&F in repair CP health faucet (ABS body)mild steel chromium plated suitable for 15mm dia pipe with 1.25 metro long Flexible Tube & Wall Hook complete all as specified and as directed by Engineer-in-charge (Make : Pryag, Seiko, Jaquar)

S&F in repair Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed by Engineer-in-charge

S&F in repair for PVC (SWR) pipes 110mm dia single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed by Engineer-in-charge

S&F in repair for PVC (SWR) pipes 75mm dia single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed by Engineer-in-charge

S&F in repair for PVC (SWR) bends 110mm any radius with rubber ring complete all as specified and as directed by Engineer-in-charge

S&F in repair for PVC (SWR) branch piece 110 mm, double (double Y) equal or unequal complete all as specified and as directed by Engineer-in-charge

S&F in repair for PVC (SWR) branch piece 75 mm, double (double Y) equal or unequal complete all as specified and as directed by Engineer-in-charge

Dismantling water tanks (exc 250 liter but n exc 500 liter capacity) and removing to store complete all as specified and as directed .

Dismantling water tanks (exc 500 liter but n exc 1000 liter capacity) and removing to store complete all as specified and as directed .

Supply fixing and Hoisting Rotational moulded polyethylene water storage tanks triple layered of 500 liters capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I

Supply fixing and Hoisting Rotational moulded polyethylene water storage tanks triple layered of 1000 liters capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I

S&F in repair Gun-metal, globe or gate valves, 20mm dia with iron wheel head, screwed both ends for iron pipe and fixed

S&F in repair Gun-metal, globe or gate valves, 15mm dia with iron wheel head, screwed both ends for iron pipe and fixed

M&L for cleaning of OH PVC Service Tank internally by bailing out of water/sludge from bottom of sump, removing all scale, dirt, alges and other growths from entire surfaces of tank and from mouths of circulating pipes by rubbing with wire brushes and by high pressure cleaning method with rotary sets with approved detergents and sucking all dirty water by vacuum cleaners, disinfecting the tank with approved chemical/bleaching powder for making the surfaces bacteria free and cleaning with fresh water, all as directed by Engineer-in-Charge. (a) Overhead PVC water tank n. exc 500ltr capacity Note : cleaning of OH PVC service tanks are safely to be handled Damage and breaking of tanks are on Contractors OWN risk

All as per Srl Item No 93.00 above but tanks n. exc 1000ltr capacity Note : cleaning of OH PVC service tanks are safely to be handled Damage and breaking of tanks are on Contractors OWN risk

S&F in repair Brass CP mixer for mixing hot& cold water screwed down for iron pipe and fixed to 15mm dia bore pipe etc complete all as specified

Dismantlling of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified and directed by Engr-In-Charge.

M&L for 15mm thick mineral board fine fissured in true horizontal level of size 600x600 mm as in false ceiling hot dipped galvanised steel section exposed surfeces with precoated capping main centre to centre size 24mm x 32mm having 0.27mm gauge at every 1200mm centre to centre and wall angle of size 19mm x 19mm having 0.35mm gauged fixed to periphery at every 1200mm c/c on both directions using 3mm thick prestrightened at every 1200mm c/c on both directions using 3mm thick prestrighteed GI wire, laying etc complete all as directed by Engr-in-charge

S&F Mortice lock, vertical type, size 100 mm Aluminium 2 levers complete all as specified and directed by Engr-In-Charge.

S&F in repair Mortice lock,vertical type, size100 mm Aluminium 2 levers complete all as specified and directed by Engr-In-Charge.

S&F in repair soap dish stainless steel as approved by GE complete all as specified and as directed by Engineer-in-charge

Supply and fix 15mm outer dia 3-layers PP-R polypropelene random copolymer concealed pipes SDR7.4(PN 16) UV stabilised and anti microbial fusion welded having thermal stability for hot and cold water supply including all PP-R plain & brass threaed polypropylene random fitting fixed complete to walls ,ceilings or in floor etc complete all as specified and directed by Engr-In-Charge.

S&F in repair PVC connections 15mm size with PTMT nuts of length 600mm complete all as specified and as directed by Engineer-in-charge

Supply and fix PVC (SWR) multi floor trap 75 mm with grating including jointing with solvent cement complete all as specified and as directed

Taking down cement plaster on brick or stone walls etc incl racking out joints, hacking for key scrubbing down with water etc complete all as specified.

M&L for rendering 5mm thick in cm 1:4 on fair faces of concrete as in soffit ceiling of slab, chajjas finished even & smooth without using extra cement complete all as specified and as directed by engineer-in-charge

M&L for rendering 15mm thick in cm 1:6 on fair faces of brick work or concrete surfaces of wall and finishing the surface even and smooth without using extra cement complete all as specified.

M & L for rendering 20 mm thick (15 mm thick backing coat in CM 1:6 and 5mm thick finishing coat in CM 1:4) on fair faces of brick work or concrete surfaces including finished even and smooth without using extra cement with using water proofing compound (water proofing compound shall be measured and paid seperately)

M&L for rendering 10mm thick CM 1:4 on fair faces of concrete or brick surface of wall and finishing the surface even and smooth without using extra cement all as specified and as directed

M&L for Preparing new plastered surfaces of ceiling and applying two coats of white wash complete all as specified and directed.

M&L for preparation of new plaster surfaces and apply two coat of white wash on ceilings complete all as specified and as directed by engineer-in-charge

M&L for washing,rubbing down and stopping of distempered and painted surfaces of ceiling and applying one coat of distemper oil-emulsion on ceiling all as specified.

M & L for preparation of newly plastered surfaces and applying two coat of Oil bound distemper over a coat of alkali resist primer on wall all as specified and as directed.

M&L for preparation of newly plasterd surface of concrete or brick surfaces and applying Two coats ( having proportion @1.67 Litr/10 Sqm) of acrylic smooth exterior paint of required shade and including priming coat of exterior primer applied @ 2.20 Kg / 10 sqm, complete all as specified and as directed by Engr-in charge.

M & L for preparation of newly plastered surfaces and applying two coat of Oil bound distemper over a coat of alkali resist primer on ceilings all as specified and as directed.

M&L fixed in repairs Waste coupling of PTMT (half or full threaded) . (Minimum weight 32mm 45gmscomplete all as specified and directed by Engr-In-Charge.

M&L fixed in repairs Waste coupling of PTMT (half or full threaded) . (Minimum weight 40mm-60 gms) ,complete all as specified and directed by Engr-In-Charge.

S&F 32mm dia Waste coupling of PTMT (half or full threaded) . (Minimum weight 32mm?45gms/40mm-60 gms) ,complete all as specified and directed by Engr-In-Charge.

S&F 40 mm dia Waste coupling of PTMT (half or full threaded) . (Minimum weight 32mm?45gms/40mm-60 gms ,complete all as specified and directed by Engr-In-Charge.

S&F PVC Waste pipe dia 32 mm mm and lenth 1000 mm complete all as specified as directed by engineer-in-charge

S&F PVC waste pipe, 32mm bore suitable to waste coupling pipe attach with rubber ring joints fixed to waste coupling of sinks/WHBs complete all as specified and directed.

Demolition Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings

Demolition Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings

Dismantling wrought iron or mild steel work of any description not otherwise provided for

S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof overing/cladding to wall, fixed with self tapping screws ,complete all as specified and as directed by Engr-in-charge.

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws iron/wooden framework as per site conitions, complete all as specified and as directed by Engr-in-Charge

S&F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 complete all as specified and as directed by Engr-in-charge

M&L for preparation of new Steel surfaces of any description over 10cm width of girth applying two coats of synthetic enamel paint over coat of red oxide primer etc complete all as spcd and as directed by Engr-in-charge

M&L for preparation of old Steel surfaces of any description over 10cm width of girth applying one coats of synthetic enamel paint over coat of red oxide primer etc complete all as spcd and as directed by Engr-in-charge

S&F pipes 140 mm dia PVC (SWR) stop end with outlet fixed to GI sheets for rain water collection and conveyance , complete all as specified and as directed by the Engr- in- Charge.

M&L for Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 ® , complete all as specified and as directed by the Engr- in- Charge.

S&F pipes 140 mm dia PVC (SWR) half round pipes as eaves gutters in any length with rubber ring joints fixed to GI sheets for rain water collection and conveyance , complete all as specified and as directed by the Engr- in- Charge.

S&F mild steel Plates, 6mm thick,(plain or chequered), Fe 410-W (Gde E - 250) quality - A, channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment ,complete all as specified and as directed by Engr-in-charge.

Mild steel screw bolts 11 to 15 mm dia (machine made) with hexagonal or square eads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm long ,complete all as specified and as directed by Engr-in-charge.

Taking down the steel rolling shutter gear operated rolling shutter n-exc 30 sqm area including adjustment of gear worms assenbely complete each including hood cover and cleaning the sides of shutter suspension and guide shannelks and greasing all the moving parts of rolling shutter shaft and replacement of bolts and nuts as required for smooth functioninig of shutters and refixing the same including hood cover ,complete all as specified and directed by Engr-In-Charge.

S & F in repair in MS hood cover made out of mild steel sheets 1.00mm thick including bending the steel sheets to required shape and fixing the sheet to the rolling shutters bracket plate including one coat of red oxide primer and two coat of aluminium paints ,complete all as specified and directed by Engr-in-Charge.

S & F in repairs of roller ball bearing ISI marked for 40mm dia pipe shaft ,complete all as specified and directed by Engr-In-Charge.

S&F Steel rolling shutters, gear operated type with bevel gear box and crank handle, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete: push pull or manual type thickness of latch 1.25 mm ,complete all as specified and directed by Engr-in-Charge.

M&L Pre-cast cement concrete block masonry1:3:6 TYPE C1 in CM 1:6 with solid blocks, exc. 10 cm in width and setting in mortar, complete all as specified and direcetd

S&F Anodised aluminium snap grid frame work for false ceiling ,complete all as specified and directed by Engr-In-Charge.

M&L for Racking out extg. Joints , width of joints exc 10 mm but n exc. 15 mm wide and depth of joints exc 15 mm but n exc. 25 mm deep of slabs of pavements for removing old damaged sealent from joints cleaning the surfaces by means of air compressor or vaccum cleaner and M&L for joint filling with polyurethene sealent conforming to BS - 5212 (type FB) after applying primer and masking tape on front edge of joints to prevent accidental spillage of sealent on top surfaces and to give a neat finish to the sealent, including required back up rod and removing masking tape after sealent has been applied all as specified and as directed at site, all as directed. Note: Minimum depth of sealent should not be less than 15 mm (Make of sealent : "Rallithane" of M/s Chemtal Rai/ Techseal PU - 2 of M/s Choksey Chemicals)

M&L for Racking out extg. Joints , width of joints exc 15mm but n exc. 25 mm wide and depth of joints exc 20 mm but n exc. 30 mm deep of slabs of pavements for removing old damaged sealent from joints cleaning the surfaces by means of air compressor or vaccum cleaner and M&L for joint filling with polyurethene sealent conforming to BS - 5212 (type FB) after applying primer and masking tape on front edge of joints to prevent accidental spillage of sealent on top surfaces and to give a neat finish to the sealent, including required back up rod and removing masking tape after sealent has been applied all as specified and as directed at site, all as directed. Note: Minimum depth of sealent should not be less than 18 mm (Make of sealent : "Rallithane" of M/s Chemtal Rai/ Techseal PU - 2 of M/s Choksey Chemicals)

M&L for preapration of damaged/broken concrete pavement slab surfaces of area exceeding 0.50 Sqm (width should not be less than 75mm) by cutting damaged portion of concrete vertically at least 25 mm average depth(minimum depth should not be less than 20mm) with the help of concrete cutter machine and cleaning the surface by electical blower (with DC supply) to receive the Epoxy mortar and applying the epoxy mortar on the prepared damaged / broken portion over a coat of approved primer including finishing even & smooth surfaces to match with the top & vertical surfaces all as specified & directed. (Note : Make of Epoxy mortar SL-I, M/s Choksey Chemicals, ET : Chemistic / Razon Eng. Co. Pvt Ltd)

M&L for Preparation of old concrete surfaces of any description over 10cm girth or width, not otherwise described and applying two coats of synthetic enamel paint complete all as specified and directed

M&L for Preparation of old concrete surfaces of any description and applying one coat of cement base paint of approved colour complete all as specified and directed

M&L for Washing, rubbing down and stopping of distempered and painted surfaces of wall and applying one coat of distemper oil-emulsion on walls all as specified.

M&L for preparing new plastered surfaces and applying two coat of OBD over a coat of alkali resistant priming paint complete all as specified.

Demolition of brick work built in cement mortar complete all as specified and directed.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in hard and dense soil complete all as specified and directed

M&L for Plain Cement concrete with type D2 1:4:8 (40 mm graded stone aggregate) in foundations, filling and mass concrete complete all as specified and directed

M&L for Plain Cement concrete with type D2 1:2:4 (40 mm graded stoneaggregate) in foundations, filling and mass concrete complete all as specified and directed

M&L for Plain Cement concrete with type D2 1:4:8 (40 mm graded stone aggregate) in foundations, filling and mass concrete complete all as specified and directed

M&L for 75mm thick cement concrete type C2, 1:3:6 (40mm graded stone aggregate) complete all as specified and directed.

Formwork to edges of concrete flats fair finished exc 5 cm but n exc 10cm wide ,complete all as specified and directed by Engr-In-Charge.

Demolition of unreinforced concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed

Removing building materials etc. (other than spoil payable under items 03028 to 03031 in Section-3—Earthwork) to a distance of 100m or under, beyond the lead included in the rates, including loading, unloading and stacking at the destination complete all as specified and directed

M&L for Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed

M&L Machine pressed precast concrete interlocking paver block with grey cement and pigment any shape and size confirming to IS 15658-2006 of 80 mm thickness M-40 Grade complete all as specified and directed.

M&L for Providing, cement concrete with Type B1 1:2:4 (20 mm graded stone aggregate) in roof kerbs or mud stops, rounded or chamfered on edges complete all as specified and directed

M&L for 3mm thick one coat of wall care putty on wall ,complete all as specified and directed by Engr-In-Charge.

M&L for 3mm thick one coat of wall care putty on ceiling ,complete all as specified and directed by Engr-In-Charge.

Supply only integral water proofing compound ,complete all as specified and directed by Engr-In-Charge.

S&F in repair aluminum anodized windows/doors with necessary accessories/fitting after taking down and refixing after replacement, Note: Material required for repairing of windows/door i.e.broken aluminium section, roller, wiremesh, window panes etc shall be paid under relevent item of Sch A as supply only.

Supply only stainless steel wire cloth, 0.36mm nominal dia of wire and average width of sperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed by Engineer-in-charge

Supply only sheet glass 4.00mm thick, ordinary quality and glazing n.exc 0.50Sqm in each pane ,complete all as specified and as directed by Engineer-in-charge

Supply only Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified

Supply only rollers for sliding windows including fixing to aluminium windows section after taking down old unserviceable rollers

Supply & fix stainless steel wire cloth, 0.36mm nominal dia of wire and average width of sperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed by Engineer-in-charge

Supply and fix sheet glass 4.00mm thick, ordinary quality and glazing n.exc 0.50Sqm in each pane ,complete all as specified and as directed by Engineer-in-charge

S&F sheet glass ordinary quality 3.00mm thick and glazing with oil putty or aluminium/rubber beading in squares n.exc 0.5 sqm in each pane ,complete all as specified and as directed by Engineer-in-charge.

S&F figured glass, pin-headed type 3.00 mm thick and glazing with oil putty or aluminium/rubber beading in squares n.exc 0.5 sqm in each pane ,complete all as specified and as directed by Engineer-in-charge.

Supply and fix aluminium anodised/powder coated star lock for doors/windows, as directed

S&F butt hinges,100 mm long, medium weight, cold rolled mild steel,fixed with steel screws or welded to steel frame where required complete all as specified and directed

S&F Mild steel butt hinge, 75 mm long, medium weight, cold rolled fixed with steel screws or welded to steel frame where required complete all as specified and directed

M&L for Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads exc 1.5 sqm

Dismantling boarding, any description,, fixed in any position with screws complete all as specified and directed.

S&F 18/19 mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination fixed with screws to timber frame work, complete all as specified and directed.

S&F 100mm long hasp and staple, safety type, aluminium anodised including bolt to hinge plate and fixed with screws and fixed complete all as specified and directed.

S&F in repair 20mm Ball valves, high pressure of PTMT with epoxy coated aluminium rod & highdensity plastic ball screwed for iron pipe and fixed (Minimum weight 20mm-210gms complete complete all as specified and directed by Engr in Charge.

Supply and Fix 450mmX450mmX75mm of square light of 36W by using angle iron of size 25mmX25mm framed with all side . Inner arcylic sheet should be Blue colour or as directed. In center of the Board be embedded with Number 26 with white LED . Length of number 26 should be not less than 30 cm or as directed. Note : Light fitting should be fixed above 3 mtr hight on RCC pole . Fixing material like clamp & bracket deemed to be included in unit quote rate.

S&F PVC insulated Multi Stranded Copper Conductor Cable 4 Sqmm 3 Core with 25 mm PVC conduit , Round Flexible for connection of Bolard Lights Fitting including Taking down unserviceable Cable of any description, complete all as specified and as directed.

Supply and fixing HOT moulded (FRP) junction box for street light pole with locking arrangement with IP 65 protection of size 280 x 200 with 32 Amp 4 way heavy duty terminal block with 10Amp MCB SP and two number of cable entry gland of standard size with suitable stainless steel bracket to fix with pole, including taking down existing , complete all as specified and directed by Engg-in-Charge.

Supply & Fixing LED Bollard light 9/10 watts with opal acrylic diffuser and IP-65 protection , pressure die cast housing with PC diffuser, suitable for garden and pathway complete with internal connection including suitable size of stand for LED garden light of 9/10 Watts capacity , complete all as specified and directed by Engg-in-Charge. Make: Bajaj cat part No. BGBOM 650 9W LED/and equivalent make

Taking down carefully existing aluminium/Copper point wiring light, fan socket or power bell complete with fitting such as sockets, ceiling roses, pendants batten holders regulators socket, call bells & making good to the disturbed surfaces of walls, matching the colour with existing Surface all as spd and directed by Engr-in-Charge. Note: Rate for making good shall be deemed to be included in quoted rate.

Supply & fixing PVC Lamp holder suitable for and including batten fittings ,CFL/Electric lamp with backalite 20mm back plate ,complete all as specified and as directed by Engr-in-charge .Make: Anchor/Havells/Legrand

M& L for Point wiring complete with 1100 volts grade FRLS insulated unsheathed cable of copper conductor cable multi stranded of size 1.5 Sqmm single core including PVC rigid concealed conduit medium grade of suitable size (not less than 20mm dia) with all accessories such as bend reducers /MS hooks, MS junction box 1.2mm thick MS pressed sunken terminal boxes of suitable sizes for mounting of switches sockets, fan regulators etc covered with 3.15 mm thick bakelite laminated (Hylem/Anchor) top cover including continuous earth wire of size 1.5 Sqmm PVC strandedcopper conductor unsheathed, insulated stranded (Green colour) connected to common earth point dolly ,complete all as specified and as directed by Engr-in-charge .for the following:-

One light point/call bell point/fan point to be controlled by one number one way PT switch

Switch socket combination 5 Pin 5 Amps 230 Volts point controlled by one switch and wiring with 1.5 Sqmm PVC unsheathed copper conductor cable 1.5 Sqmm PVC insulated earth wire on independent board

All as per Srl Item No 187.00 above but on same board

Switch socket combination (multi purposes) 6 Pin 15 Amps point to be controlled by one switch & wiring with 2.5 Sqmm PVC- unsheathed copper conductor cable 2.5 Sqmm PVC insulated earth wire on independent board.

S&F switch Piano type single pole one way 5 Amp,230 VAC ,complete all as specified and as directed by Engr-in-charge .

Supply and fixing bell push flush type 5 Amp ,complete all as specified and as directed by Engr-in-charge.

S&F socket two in one ,3 Pin 5 Amps 230 VAC ,complete all as specified and as directed by Engr-in-charge .

S&F switch Piano type single pole one way 15 Amp on laminated sheet top cover ,complete all as specified and as directed by Engr-in-charge (Sheet top cover incl in point wiring) .

S&F socket Pinao type 6 Pin 16 amp,230 VAC ,complete all as specified and as directed by Engr-in-charge .

S&F bell ding dong AC 230V single pole ,complete all as specified and as directed by Engr-in-charge .

S&F Ceiling rose, two to three terminals with bakalite 20mm back plate,complete all as specified and as directed by Engr-in-charge .

S&F Batten for LED tube light fixture with extruded aluminium heat sink,environmental friendly energy efficient ready to use with 18/20W LED 6000K(4') including electric connection with PVC copper flexible three core cable 24/.0076 from ceiling rose to light fitting ,complete all as specified and as directed by Engr-in-charge .

S & F ,in repair, capping casing 20mm width ,complete all as specified and as directed by Engr-in-charge

S & F ,in repair, fan regulator Electronics step type 80 watts and connecting,complete all as specified and as directed by Engr-in-charge

S & F ,in repair, Modular Bell push button flush type 5 Amps ,complete all as specified and as directed by Engr-in-charge .

S & F ,in repair, switch socket combination 2 in 1,3 pin,5 and 15 Amps flush type 220 V ,complete all as specified and as directed by Engr-in-charge .

S & F ,in repair, switch socket combination 2 in 1,3 pin,5 Amps flush type 220 V ,complete all as specified and as directed by Engr-in-charge .

S & F ,in repair, LED lamp 7 watt,220 volt ,complete all as specified and as directed by Engr-in-charge .

S&F ceilling fan of size 1200 mm sweep 5 star rating complete all as specified and as directed by Engr-in-charge.

S&F fresh air fan steel body of size 300 mm sweep ,complete all as specified and as directed by Engr-in-charge.

S&F condenser 2.5 Mfd/3.5 Mfd capacity ,complete all as specified and as directed by Engr-in-charge.

S&F Capacitor 4Mfd suitable for exhaust fan of sweep 300mm/450mm ,complete all as specified and as directed by Engr-in-charge.

Biju Construction & Co

MSK Everlast Enterprises

Vinod Enterprises

M/s Mukesh Engineers