RequiredOEM Authorization Certificate Bid to RA enabled No Emergency Lighting And Accessories (PORTABLE EMERGENCY LIGHTING SYSTEM Tower Type With AC Genset) ( 2 pieces ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Bid Requirement (Allowed Values) GENERIC Portable emergency lighting system consisting one Gen set
RequiredTower/Telescopic collapsible mast/Vertical mast
RequiredLED Luminaire
RequiredSupporting kits
RequiredTool Kits
RequiredStorage box for Yes * 1/7 tool kit (Tool kit list to be furnihed by seller at the time of supply) Rating of Generator set (in KVA) (Minimum) 5.0 KVA 5.0 KVA Number of cylinder in the Engine 2 Cylinder 2 Cylinder Minimum continuous working hours 12 hours 12 hours Gen set fuel tank capacity (Minimum) - in litres 20 litres 20 litres Type of fuel Diesel Diesel Minimum System Lumens 20000 20000 IP rating of LED Luminaire IP66 * Ruggedised Storage Box for main equipment Yes * TOWER CONSTRUCTION Minimum height of Tower/Telescopic collapsible mast/Vertical Mast with light source (in meters from base ground level) 9 9 Material of Tower/Telescopic collapsible mast Vertical Mast Galvanised Iron Galvanised Iron Minimum thickness of Tower/Telescopic collapsible mast/Vertical Mast material (+/-5%) 5 mm * Method of step up and step down of Tower Telescopic collapsible mast/Vertical Mast Winch mechanism * Step up and step down time of Tower Telescopic collapsible mast/Vertical Mast </=2 Minutes * The strength of the Tower/Telescopic collapsible mast/Vertical Mast tower is to provide 40 km/hr * 2/7 support for it to remain erect at wind speed of GENERATOR SET CONSTRUCTION Generator Set: Recoil start portable AC Generating set comprising AC Generator with declared rating 230 V Single Phase of unit power factor conforming to IS:13364 (Part 1/92) and petrol run air cooled four stroke single cylinder engine with resettable circuit breaker in the AC output Yes * Type of mounting With trolley With trolley Engines shall conforming to IS:7347/1974 (Reaffirmed in 2006) latest Yes * Alternator shall conforming to IS: 13364 (Part 1)/1992 (Reaffirmed 2003) latest Yes * System should work on 220/230V
Required50 Hz AC supply and for connecting to the mains shall have provision for 15 Amps 3 Pin/2 pin Socket and a suitable lead wire with plugs at both ends Yes * LED LUMINAIRE CONSTRUCTION LED Luminaire conformity to IS:10322/Part 5/Section 5/2012 latest and IS: 16107 (Part 2/Sec 1):2012 latest Yes * Photo biological safety of LEDs used shall be as per IS:16108/2012 (exempt group) Yes * LED Modules as per the IS: 16103(Part-2)/2012 Yes * Luminaire System Efficacy (Lumen/watt) >/= 100 Lm/Watt * LED chip Efficacy ≥130 Lm/Watt * 3/7 Colour temperature (+/-500K) 6000K * Working life for LED (Minimum 50
Required000 burning hours as per LM-80 report) >/= 50
Required000 burning hours * Colour Rendering Index(CRI) ≥70 * Optic lense materal (UV stabilised) Poly carbonate lense * The Luminaires casing/housing (single piece housing) shall be pressure die casted aluminium alloy with higher thermal conductivity Yes * The luminaire body must be corrosion resistant powder coated Yes * All fastners must be of stainless steel Yes * Extruded silicon loop gasket shall be provided to ensure a weather proof seal between the UV Glass cover and the metal housing to exclude the entry of the dust
Requiredwater
Requiredinsects etc.
RequiredYes * Luminaries light transparency should be of Toughened glass Yes * Toughned transparent glass cover thickness >/=4 mm * Toughned Glass shall not get discoloured shall not suffer degration due to heat and ageing within warranty period Yes * Heat sink should be die- cast aluminium along with sufficient heat sink fins to dissipate heat effectively Yes * Operating temperature range -20 deg. C to +50 deg. C * 4/7 "Manufactures Name and and brand on the aluminium die cast body " Engraved/Embossed * Date of manufacture (month-year)
Requiredand lot number as identification mark inside of each unit Yes * REPORTS AND CERTIFICATIONS Availability of type test reports from Central Government Laboratory/NABL Accrediated/ILAC Laboratory for complete Portable emergency lighting system including for Engine
RequiredAlternator and Luminaires as per relevant IS specifications as applicable Yes * Luminaire System must have EMI/EMC compliance as applicable (Test reports shall be furnish on demand by buyer/consignee) Yes * Availability for LM 79 (Photometry) (Ref.IS:16106:2012) report from Central Government NABL/ILAC accrediated lab. (Reports shall be furnish on demany by buyer/Consignee) Yes * Availability of LM 80 & TM 21 (Ref. IS:16105:2012) Report and Photo biological report for LED report from Central Government NABL/ILAC accrediated lab. (LM-80 report shall have the Pohoto Biological report of the LED Chip being used in the luminaire) (Reports shall be furnish on demany by buyer Yes * 5/7 Consignee) LED Luminaire shall have Complusory Registration(CRS) of BIS for safety as per IS 10322 (Part 5/Section 5): 2012 or as applicable for portable emergency lighting system as applicable as on date Yes * Total Weight of complete system (Must declare) in Kg </=1000 Kg * Warranty for complete system 1 Year * * Specifications highlighted in bold are the Golden Parameters. * Bidders may note that In respect of non-golden Parameters
Requiredthe specifications 'Values' chosen by Buyer will generally be preferred over 'Bid requirement ( allowed Values) by the Buyer. Additional Specification Documents
