Zone 4A :- New works & all ordinary repairs works in the jurisdiction ofSSE (W-II)- Lower Parel , SSE (W-I)-Lower Parel &SSE (W)-Matunga road under ADEN(Est-S)- Lower parel

A-All DSR-21 Items

Item Breakup - B-All NS Items

Uncoursed hand-packed DRY RUBBLE FILLING (in work cum like rubble filling behind abutments etc.)without any special dressing of stones. Total 15660.00 Item- 2 UPVC pipe 160 mm dia S No. Item Description of Item Unit Qty Rate Amount No

Providing, laying and fixing unplasticized polyvinyl RM chloride(UPVC) pipes for soil, and waste discharge system type 'B' (SWR system) of 'Prince' or similar make (as per IS 13592:1992), single socketed for underground drainage system, making joints air and water tight with 'T' Shaped etc. Rate are including rubber rings ,solvent cement all labour, material, lead, lift, transportation, taxes,& royalty etc .complete, Note- Excavation of earth will be paid under relevant item in DSR (a)160 mm dia Total 51450.00 Item- 3 Nylon mosquito net S No. Item Description of Item Unit Qty Rate Amount No

Supplying & fixing nylone mosquito net of "NETLON" or Sqm similar make on existing wooden frame with male & female welcro tape system. The female shall be fixed to wooden frame by adhesives such as phevicol & nails as well The male shall be stretched with the nylon mosquito nets along the perimeter. Rate is inclusive of all materials i.e.Netlon, welcro stitching, and nailing etc.complete. Total 16740.00 Item- 4 Sintex tank cover S No. Item Description of Item Unit Qty Rate Amount No

Supplying and fixing BMC approved cover of sintex or Each similar double nesting type hot press moulded GMC cover complete with outer GMC ring etc. complete including air and water tight with necessary fixing arrangement nuts, bolts, locking arrangementetc. Rate shall be including all labour, materials, tools and plants, transportation etc. complete. a ) Size 460 mm to 520 mm dia. Total 86475.00 Supplying and fixing GI clamp making U shape and size 30x30x3 mm flat with 6mm dia round bar threaded both end side screw, nut including removing and refixing the existing Dn. take pipe in Item- 5 original shape including cutting the wall and making good the same. The rate include all material,labour,leads,lifts,transportation etc. S No. Item Description of Item Unit Qty Rate Amount No MUMBAI CENTRAL DIVISION-ENGINEERING/WESTERN RLY

100 mm dia Total 29625.00 Item- 6 Repairing WC S No. Item Description of Item Unit Qty Rate Amount No

Repairing of WC by dismantling existing WC pot along Each existing tiles, concrete ,brick bet coba fittings like U/P trap water connection etc upto down take pipe after dismantling providing new WC pot of hindware or equivalent brand with necessary fitting such as P/U trap up to down take ppe and reconnection for water. Contractor has to provide brick bat coba, concreting, tiling, brickwork etc as required to fix the WC pot. Rate includes all T&P, labour, material etc. The joints of fitting of WC and connection of down take pipe etc. Should be completely leak proof. No payment will be made if leakage seen after repairing. The work shall be carried out in presence of Railway supervisor and work taken on hand should be complete in same day. Rate also include the repairing of fitting broken during the work Total 75810.00 Supplying and fixing counters/cupboards made of marine ply of kit ply gold or Gujran ply or similar conforming to IS 710 as per following description. The top shall be supported by vertical supports of marine ply and fixed to wall without any gap. Drawers for wooden knobs, locking arrangements and sliding arrangements consisting of PVC sliding rollers on aluminium angles shall be provided as per approved drawings. Shelves as per approved drawings below the working platform with horizontal Item- 7 and vertical dividers, shutters of marine ply with brass hinges, wooden knobs and locking arrangements with brass locks shall be provided. Cost of providing veneer, polishing and CT wood work involved will be paid separately. Payment will be made for actual area of marine ply and used in the work as per following items and no extra payment will be made for fittings, sliding arrangements etc. S No. Item Description of Item Unit Qty Rate Amount No

a) 19 mm marine ply conforming to IS 710

b) 12 mm marine ply conforming to IS 710

c) 6 mm marine ply conforming to IS 710 Total 95775.00