Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹12.7 LAccepted-AOC HETIA BANKURA | BANKURA | BANKURA | WEST BENGAL | L1 | Accepted-AOC 1st lowest | |
| 2 | L2₹13.0 L+₹26,528 (2.09%)Rejected-Finance GARHBETA MADNAPURE WEST BENGAL | GARHBETA | PASCHIM MEDINIPUR | WEST BENGAL | L2 | Rejected-Finance 2nd lowest | |
| 3 | L3₹13.0 L+₹32,004 (2.52%)Rejected-Finance VILL P O KAPISTA P S GANGAJALGHATI DIST BANKURA | KAPISTA | BANKURA | WEST BENGAL | 722133 | L3 | Rejected-Finance 3rd lowest | |
| 4 | L4₹13.1 L+₹37,210 (2.93%)Rejected-Finance BANSHBARI MALDA | L4 | Rejected-Finance 4th lowest |
Tender Value
Refer Docs
EMD Value
₹26,150
Closing Date
5 Jan 2024, 10:55 amClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Executive Engineer, P.W.Dte.
Bankura Electrical Division, PWDte, Bankura
Construction of Blood Component Separation Unit (BCSU) at Khatra SDH, Bankura -------- Electrical Installation Work.
2023_WBPWD_628672_1
WBPWDTE/EE/BED/NIQ_68/Q of 2023-24
Open Tender
ELECTRICAL WORKS ORG
Item Wise
60 days
Khatra
Please refer Tender documents.
3 documents required · 3 mandatory
₹26,150
23 Aug 2024
21 Dec 2023
8 Jan 2024
21 Dec 2023
5 Jan 2024
21 Dec 2023
Amount
ELECTRICAL INSTALLATION WORK Supplying and fixing double door Vertical TPN MCB Distribution board for MCCB incomer with IP-42/43 protection, on angle iron frame on wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment. (Make-Legrand/Schneider/Crabtree/Seimens/ABB). Enclosure (8GB B1572RC) 6 Way [D-11/15]
Supplying and fixing double door Horizontal TPN MCB Distribution board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachmet. (Make- Legrand/Schneider/Crabtree/Seimens/ABB). 6 way Enclosure (607716) [D-10/14]
Supplying and fixing double-door SPN MCB Distribution Board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment. (Make- Legrand/Schneider/Crabtree/Seimens/ABB) 2+10 way Enclosure [8GB32102RC12] [D-9/13]
Supplying and fixing 240/415 V Isolator on din rail of existing DBs and necessary connection as to GS. (Make- Legrand/Schneider/Crabtree/Seimens/ABB) 415 V, 63A FP [D-5/6]
Supplying and fixing 240/415V, MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connection (Make- Legrand/Schneider/Crabtree/Seimens/ABB) as to GS. 63Amp TP MCB. [D-6/7]
6A - 32A SP MCB
Distribution wiring in 1.1 KV grade 2x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Make- R R Kabel/ Havells/ Finolex/Brand approved by EIC) partly in 20mm size PVC rigid conduit 'FR' (Precision make) [for ceiling portion only] and in 19mm bore, 3mm thick polythene pipe [for horizontal & vertical run embedded in wall], with 1x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire for ECC, to light/fan/call bell points with Piano Key type switch fixed on MS CRC sheet metal (16 SWG) switch board on wall complete with 2 no. “Ph & N” copper bar incl. bakelite/ Perspex top cover 3 mm thick and incl. 175x100x65mm inspection box, making earthing attachment, painting the MS box and mending good the damages to original finish [only PVC Rigid Conduit on ceiling and remaining portion concealed] Average run 8 mtr [E-15/5]
Average run 10 mtr
Distn. wiring in 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire wire (Make- R R Kabel/ Havells/ Finolex/Brand approved by EIC) in 19 mm bore, 3 mm thick polythen pipe complete with all accessories embedded in wall to 240 V 5A 3 pin plug point incl. S&F 240 V 5A 3 pin flush type plug socket & piano key type switch incl. S&F earth continuity wire, fixed on sheet metal (16 SWG) switch board with bakelite/perspex (wall matching colour) top cover (3 mm thick) flushed in wall incl. mending good damages to original finish. On Board [E-10/4(A) i]
Cutting Channel of size (40 mm x 40 mm) on masonry wall by Electric operated cutting machine incl. supplying & fixing heavy gauge 19 mm, 3 mm thick Polythene pipe by means of anchoring chemical (Hilti/Sika) and GI 'U' hooks of 8 SWG incl. supplying and drawing 18 SWG GI wire as Fish wire and mending good damages to original finish by using own tools and tackles. [E-3/6-a]
Supplying and Drawing 1.1 KV single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire wire (Make- R R Kabel/ Havells/ Finolex/Brand approved by EIC) of the following sizes in the prelaid polythene pipe and by the prelaid GI fish wire and making necy. connection as required. 2 x 84/0.3 (6 sqmm) + 1 x 56/0.3 (4 sqmm) ECC. [E-9/1]
2 x 56/0.3 (4 sqmm) + 1 x 36/0.3 (2.5 sqmm) ECC
2 x 36/0.3 (2.5 sqmm) + 1 x 22/0.3 (1.5 sqmm) ECC
2 x 22/0.3 (1.5 sqmm) + 1 x 22/0.3 (1.5 sqmm) ECC
4 core 6 sqmm
Supplying & Fixing sheet metal inspection box including backlight top cover (16 SWG) of the following sizes(in mm ) flushed in wall as per GS a)200 x 150 x 65. [E-4/ 11 (D)]
Supply & Fixing 240 V, 3 nos. 6A, & 1 no. 20A plug socket with separate 3 nos. 6 A & 1 no. 20A Piano key type switch, indicator & 20A switch type SP MCB (Brand approved by EIC) on sheet metal switch board embedded in wall incl. S & F 240x200x65mm MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required. [E-7/26]
Supply & Fixing of 240 V 2 x 5A plug socket and switch on inclding S&F 175x100x65 mm Ms Switc Board sheet metal switch board with 3 nos of BAR as per. [E-6/21]
Supply & Fixing 240 V, 20A, plug socket with separate 20 A Piano key type switch (Brand approved by EIC) on sheet metal switch board embedded in wall incl. S & F 150x100x65mm MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required. [E-6/22]
Supplying & Fixing Industrial Plug & Socket board with 415 V, 30A, TPN & Earth Metal Industrial Plug socket & 30A Industrial top incl. S&F 32 A TPN/FP MCB breaking capcity 10kA (C- Curve) in SS enclosure fixed on wall and cecessary conection. [D-12/18]
Supply and delivery of Twin LED Fitting (2 X 20Watt, 230VAC, 50hZ, 4000K NW, THD<10%, bult in 2.5KV SPD) with all accessories and 2 nos LED Tube [Make: PHILIPS/ CROMPTON/WIPRO) [NS]
Supply and delivery of Single LED Fitting (20Watt, 230VAC, 50hZ, 4000K NW, THD<10%, bult in 2.5KV SPD) with all accessories and 1 nos LED Tube [Make: PHILIPS/ CROMPTON/WIPRO)
Fixing only fluorescent light fitting suspended 25 cm bellow the ceiling with 2 No. 20 mm dia EI conduit (14 SWG) supports incl. S&F EI conduit, ball socket/socket type ceiling plate and connecting the length of PVC insulated wire and painting etc. as required by 2x24/0.20 mm (1.5sqmm) flexible copper wire of 1.10 mt. length.[C-2/15]
Extra for suspension exceeding 25 cm with S&F additional 2 no. 20 mm dia EI conduit (14 SWG) supports & necy. PVC insulated wire and painting etc. as required by 2x24/0.20 mm (1.5sqmm.) flexible copper wire of 1.10 mt. length. [C-2/16]
Supply & delivery of AC 240V 50 Hz 48" sweep (1200 mm) ceiling fan complete with down rod , Canopy, fork incl S & F of P - 2 type capacitor as per IS specification & proper Manufacturer certificate of the capacitor (supplied at the time of delivered the fans ) etc. with out regulator, (Make- Usha (Striker plus Star CF Br/Wh) / Crompton Greaves (HS Plus 5 star) / Orient ( 5 Star ) and as per direction of EIC as per direction of EIC. [C-3/21 (a)]
Fixing only ceiling fan complete with blades, canopy, fork, rubber bush etc. incl. S&F connecting wire for down rod upto 30 cm incl. painting the rod with approved paint and making necessary connection as required by 2x1.5 sqmm flexible copper wire.[C-3/21 (a)]
Supplying & Fixing of MS fan clamp of two piece type, for RC Ceiling as per approved specification, fabricated from 40 mm x 9 mm MS Flat including making good damages to building roof with satisfactory finishing and painting - – (As per Drawing no. 475 of PWD Specification Book – May 1991). [D-14/29]
Supply & Fixing Socket type fan regulator (Step type) (Brand approved by EIC) on existing sheet metal switch board with bakelite/ perspex top cover by screw incl. making necy. connections etc. [E-618 (a)]
Supply and delivery of 230V 30cm(12") Heavy Duty Exhaust fan with all necessary accessories [Make: EPC , Usha,CG,Bajaj or equivalent Make]
Fixing only exhaust fan after making hole in wall and making good damages and smooth cement finish etc. as practicable as possible and providing necy. length of PVC insulated wire and making connection for exhaust of following diameter: 30 cm (12") [C-4/28 (b)]
Supply & Fixing GI sheet (20SWG) metal Cowl with MS flat iron frame & GI wire mesh on wall with necy. bolts & nuts (6 mm dia x 62 mm long). 30 cm Exhaust fan (12"). [d-14/33]
Supplying of following sizes Al. armoured PVC/XLPE (Havells/ R R Kabel/ Polycab/Brand approved by EIC) as per direction of EIC. 4 core 70sqmm ( For PANEL to VTPNDB )
4 core 35sqmm (For VTPN to HTPNDB)
2 core 10 smm (For compound light)
Laying of cable as below, after cutting floor/pavement/wall/ and making holes incl., embedding the cable at an average depth as below and mending good the damages to original finish incl. removing the rubbish. [F-3/5] 4 core 70 sqmm.
4 core 35 sq mm
2 core 10 sq mm
Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables as below. 4 core 70 sq mm. [F-4/7(C/a]
4 core 35 sqmm
2 core 10 sqmm
Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials. 4 core 70 sq mm. [F-5/8(B)]
4 core 35 sqmm
2 core 10 sqmm
Finishing of the PVC insulated wire ends by socketting with pin/ring type copper sockets and insulated tapes etc., including supplying sockets, tapes. as per G S 6.0 sq mm. [F-5/9]
Supply and Fixing of Street LED light fitting included with all accessories and lamps as specified below. S&F of 240V, 70W LED Street light fittings (Make Crompton TRP-409-70-57-SL-GL-NSG or equivalent of phillips / Bajaj).
S & Erection of mini pole of size 6 ft. long approx 80 mm. dia seamless pipe Class - B , on the roof of the Bldg. By S& providing M.S. plate incl. Rose type arrangement near base plate for smooth cable entry position and making C.C. muffing of size 450 x 450 x 600 mm. hight with cement mortor mixture ( 6 : 3 : 1 ) incl. neet cement finish before cheaping properly the existing roof incl. S& providing earth bold after drilling holl etc. as per direction of E.I.C.
S&F cylindrical type pole head suitable for 80 mm. dia seamless pipe and should be waterproof & fabricated from steel member steel pipe. The cylindrical portion of the pole head which sleeve over the pole shall have a length of 40 cm. ( 18" ) approx. Incl. making 225 mm. dia ( 9" ) cable terminal box. The above terminal box welded with sleeve incl. S&F 1 No. 4 way bakelite terminal AC/DC make & 1 No. 15 Amp. fuse base & bridge inside the cylindrical portion of the header assembly as per direction of E.I.C.
S&F 50 mm. dia 1.5 mtr. long detachable type Single arm bracket, suitable for pole head. The arm bracket shall be properly welded with 15 mm. thick stifner plate of pole sleeve for strengthening incl. properly fixing arrangement with the pole by bolts, nuts and washer as per direction of EIC
Inter connection of LED light fittings by 3 x 1.5 Sq. mm. PVC insulated copper wire from pole loop box with best quality PVC pipes as per direction of EIC
Painting of Steel Tubular Pole of lengths and no. of coats of paint, as given below with ready mixed paint/primer of approved make, and brand incl. preparation of surface by sand paper/emery paper, cleaning etc. for receiving fresh coat of paint Upto 9.0 mtr. long pole 1st coat of aluminium paint over 1 coat of RO priming and 2nd coat of aluminium paint over 1st coat as per GS. [H-2/4(a)]
S& F sheet metal Loop box of size 8''x6"x2 1/2" made of 14 SWG CRC Sheet with Hing type door and door locking arrangement incl S&F 250 V 3 way AC/DC make bakelite terminal in conceal in in wall after cutting the wall & mending good damage as per dir of EIC
Timer Panel:Supplying and fixing (2+12)way Legrand DB enclosure for housing the following A) One no.single dial digital timer (Legrand) B)One no. DP, conctractor 16 AMP,(LEGRAND) C) One no. DP 16A MCB (Legrand) D) One no. auto/manual Toggel Switch and other required material The complete arrangement must be wiring by PVC insulated Cu wire as per GS
Earthing with 50mm dia GI Pipe 3.64 mm thick x 3.04 Mts long and 1x4 SWG GI (Hot Dip) wire (4 mts long), 13 mm dia x 80 mm long GI bolts double nuts, double washers incl S&F 15 mm dia GI Pipe protection (1 Mts. Long) to be field with bitumen partly inder the ground levele driven to an average depth of 3.65 Mts Below the ground level as below: By ISI-Medium GI pipe. [G-1/2(a)]
Excavation of soil for installation of Earth Electrode and filling & ramming. For morrum Soil. [G-1/1-(b)]
Supplying & fixing earth busbar of galvanized (Hot Dip) MS flat 40 mm x 6 mm on wall having clearance of 6 mm from wall including providing drilled holes on the busbar complete with GI bolts, nuts, washers, spacing insulators etc. as required.[G-2/4(a)]
Connecting the equipments to earth busbar including S & F GI (Hot Dip) wire of size as below on wall/floor with staples buried inside wall/floor as required and making connection to equipments with bolts, nuts, washers, cable lugs etc. as required and mending good damages solid GI Wire. No. 6 SWG [G-25(a)/ii)]
Supply & Delivery of 1.5/1.6 TR Hi-Wall Split Air Conditioner having following specification:- 1) Cooling capacity Nominal (BTU/HR): 20301 2) Minimum ISEER rating- 3.5, BEE leveling 3 star or more (2019-20) IS compliance - IS 1391 3) Refrigerant- R410A/R32 4) Compressor- Rotary/Scroll 5) Evaporator & Condensor Coil : Copper 6) Operating Outdoor Temparature = 50°C and above 7) Power Supply- 230 V, 50 HZ (Tolerance as per applicable standard) 8) Min Room Discharge Air Flow Rate- 1350 CMH 9) Cordless Remote Arrangement with all modernized provision of temperature setting, Fan speed option (Low/Medium/High) Auto Swing. (Make-Mitsubishi Electric/ O-General/Daikin/Hitachi/as per direction of EIC )
Supply & Delivery of 2/2.2 TR Hi-Wall Split Air Conditioner having following specification:- 1) Cooling capacity Nominal (BTU/HR): 26017 2) Minimum ISEER rating- 3.5, BEE leveling 3 star or more (2019-20) IS compliance - IS 1391 3) Refrigerant- R410A/R32 4) Compressor- Rotary/Scroll 5) Evaporator & Condensor Coil : Copper 6) Operating Outdoor Temparature = 50°C and above 7) Power Supply- 230 V, 50 HZ (Tolerance as per applicable standard) 8) Min Room Discharge Air Flow Rate- 1450 CMH 9) Cordless Remote Arrangement with all modernized provision of temperature setting, Fan speed option (Low/Medium/High) Auto Swing. (Make-Mitsubishi Electric/ O-General/Daikin/Hitachi/as per direction of EIC )
Installation of the Split type 1.5 Ton /2.0 Ton A.C machine incl cutting of wall etc incl S & F suitable sizes Copper pipe of same make for Suction & Liquied line with insulation incl. S & F drain pipe of reqd. length to comp. the instn and mending good the damages as per direction of EIC.
S & F laying of- (i) gauge copper pipe 5/8" 0.7 mm thick for suction (ii) copper pipe 1/4" 0.6 mm thick for discharge (OEM make) with 9 mm thick thermal insulation foam nitrile / rubber / K Flex / Accroflex with max saddling with max 1 mtr distance both for suction & discharge pipe and mending good the holes & damages as directed by EIC. (extra length for distance of ODU & IDU exceed 3mtr.)
S & Laying of 3 x 2.5 sqmm PVC insulated & unarmoured copper wire (make--Finolex/Havells/KEI) through 19 mm dia 3 mm thick pipe for 1.5/2 Tr. Split AC machine (extra length for distance of ODU & IDU exceed 3 mtr.) with max saddling with max 1 mtr distance as per direction of EIC.
S & F of flexible PVC high quality water carrying pipe of 25 mm dia/proper size for drainage the condensate water from already installed AC to any available (nearest) drain water pipe or near to ground level and the pipe must be properly saddled with the wall incl. proper insertion of the flexible pipe to drain water pipe and sealing the entry with required materials like PVC tape, High quality sealing the entry with required materials like PVC tape, high quality sealing gum etc. as reqd. All these arrangement for fixing must be arranged by the agency itself as per direction of EIC.
Supply & Fixing 240 V, 25 A, 3 pin Modular type plug socket (Brand approved by EIC), without plug top and switch with 2 Module GI Modular type switch board with top cover plate flushed in wall and making necy. connections with PVC Cu wire and earth continuity wire etc. [E-17/5(a)]
Supply & Fixing 240 V,25 A, 3 pin Modular type plug top with indicator (Brand approved by EIC) & necy. Connections. [E-17/5(B)]
Supplying and fixing of 250 V AC timers fixed on wall with flat iron frame as per direction of EIC and the Box shuld be comprising with the following accessorise --- i) Double-door SPN MCB Distribution Board with IP-42/43 protection 10 / 12 way Enclosureas reqd . ( Make - Legrand / L & T ) – 1 no ii) 230 V , 50 Hz ,16 Amp Single dial 1 x 24 Hrs.Timer ( Microrex QT31 ) of quartz driven running reserve Day dial back up by nickle cadmium battery (Make - GEC / Legrand ) – 1 no iii) 250 V, 50 Hz , 40 Amp DP Conctractor with ( 2 NO or 1 NO + 1 NC Aux. Contract ) ( Make - Legrand / L & T ) – 1 no iv) 250 V, 50 HZ , 40 Amp , DP MCB Isolator ( Make - Legrand / L & T ) – 1 no v) Auto / Manual By pass Toggle Switch arrangement – 1 no. vi) 250 V , Diode type neon Indicator lamp ( Make - Legrand / L & T ) – 1 no vii) Bakelite base with FP bolt type stud / Terminal block incl S & F Neutral Bar etc with this box for termination of power . viii) The complete arrangement must be wiring by 2.5 Sq mm PVC insulated Cu wire with suitable length incl socketing /lugs etc as per requirement & direction of EIC (Make - Legrand /L & T / Crabtree)
S & F 240V 25A OLP - 30 Electrronic motor starter in 175mm X 100mm X 65 mm depth 16 SWG MS Box coneled in wall with bakelite top cover incl. Necy. Conncetion as per direction of EIC for AC Machines.
Supply , installation,testing & commissioning of Steel lettering acrylic (imported 3 mm ) signages made of 22 SWG stainless steel 304 grade ,enclosed except the facia. The facia should be made of acrylic. provision should be as such that Inside each letter LED lights(defused type ,waterprof) will glow throughout the letter.The led connect through Driver S/F of 10'x4'x10" ACP sheet of 4mm thickness fixed on iron frame, on which the letters will be fixed. The Letters will be as per direction of EIC. The board should be fixed on top of building. Holding the board by 2" iron angles. .S/F of 32mm steel channel on the complete edges. The letters will be fixed on the board by steel nuts & bolts etc. Additional all necessary arrangement to support the board by iron structure grouted on top of the building, structure will be fixed on concrete pillers as per requirement. Loading the complete board from manufacturing unit and carrying to the site, unloading the board and lifting it to the top of the 1st floor by manpower and fixing on proper place. Supply and Fixing special logo of Govt.of west Bengal log on Acrylic 3 mm-Exterior grade lettering made of enclosed except the facia. The facia should be made of acrylic and placed at the top of the building. Provision should be as such that Inside each letter heat sinkable LED lights will glow throughout the letter. S/F of ACP sheet of 4mm thickness fixed on iron frame, on which the letters will be fixed at entrance of building. High power fully water proof LED power unit of 400 W diffused SMD Model light. The Letters will be as per direction of E.I.C.
ASSOCIATE
GENUINE ENGINEERING WORKS
M/S KUNDU CONSTRUCTION
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .