Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Fee/PreQual/Technical/Finance | Admitted-Fee/PreQual/Technical/Finance |
| 2 | Admitted-Fee/PreQual/Technical/Finance | Admitted-Fee/PreQual/Technical/Finance |
| 3 | Admitted-Fee/PreQual/Technical/Finance | Admitted-Fee/PreQual/Technical/Finance |
Tender Value
₹47.2 L
EMD Value
₹94,400
Closing Date
6 Feb 2023, 3:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Executive Engineer, MU.
Manipur University Canchipur, Imphal - 795005.
Construction of 100 Bedded MIT Boys, MU.
2023_MU_737562_1
No. 53/2022-23/ENGG/MU/Civil/Elect
Open Tender
Coal Works
Works
45 days
As Per Tender Document
Please refer Tender documents.
6 documents required · 6 mandatory
₹500
The Registrar, Manipur University.
₹94,400
Canchipur MU.
7 Feb 2023
30 Jan 2023
7 Feb 2023
30 Jan 2023
6 Feb 2023
30 Jan 2023
2 Feb 2023
Amount
Land development and approach road
Earth work in rough excavation banking excavated earth in layer not exceeding 20cm depth, breaking clods, watering rolling each layer with 1/2 tonne roller or wooden or steel rammer rolling every third and topmost layer with power roller of minimum 8 tonne and dressing up embankment for roads, floods banks guide banks and filling up ground, depression lead upto 50 metres and lift upto 1.5 m in
Providing laying & compacting granular base/sub-base according to lines, grades& cross-sections by using naturally occurring sand gravel/conforming to IRC Grade 2 of M.O.S.T. specification free from organic or other deleterious constituents compact by rolling with power roller of 8 to10 tonnes capacity in layers not exceeding 150 mm (spread thickness)including rolling of the road surface to proper level & grade 30 cm width edging on both sides etc. complete as directed by the Engineer-in-charge. ( with carriage charge of all materials)
Construction of Chowkidar Quarter
Earth work in excavation in foundation trenches or drains including dressing of sides and ramming of bottoms lift upto 1.5 metres including getting out the excavated soil and disposal of surplus excavated soil as directed within a lead of 50 metres
Hard/Dense Soil.
Filling available excavated earth (excluding rock) in trenches, plinth sides of foundation etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering lead upto 50 metres lift upto 1.5 metre
Filling in plinth with sandy soil under floors including watering ramming, consolidating and dressing complete.
Providing and laying cement concrete in foundation and plinth excluding the cost of centering and shuttering in
1:2:4 (1 cement:2 coarse sand: 4 graded stone aggregate 20 mm nominal size)
1:5:10 (1 cement : 5 coarse sand :10 graded stone aggregate 40 mm nominal size)
Providing plinth protection 50 mm thick in cement concrete 1:3:6 (1 cement:3 coarse sand:6 graded stone aggrt. of 20 mm nominal size) i/c finishing the top surface of concrete smooth.
Providing under layer for plinth protection of 75 mm thick rammed & consolidated & grouted with fine sand including preparation of ground
Providing and laying in position specified grade of reinforced cement concrete,excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :
1:1.5:3 (1 cement: 1.5 coarse sand: 3 graded stone aggregate 20 mm nominal size).
Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers,abutments, posts and struts etc. up to floor five level excluding cost of centering,shuttering, finishing and reinforcement :
1:1.5:3 (1 cement: 1.5 coarse sand: 3 graded stone aggregate 20 mm nominal size).
Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills,staircases and spiral stair cases up to floor five level excluding the cost of centering,shuttering, finishing and reinforcement, with
1:1.5:3 (1 cement: 1.5 coarse sand: 3 graded stone aggregate 20 mm nominal size).
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete
Thermo-Mechanically Treated bars
Providing form works i/c centering and shuttering so as to give a rough finish, strutting and propping etc. height of propping and centering below supporting floor to ceiling not exceeding 4 m and removal of the same for in-situ reinforced concrete and plain concrete work in
Foundation, footings, bases of columns etc. and mass concrete.
Flat surface such as suspended floor, roofs landings and the like
floors etc. upto 200 mm in thickness
Columns, pillars, posts and struts (square, rectangular or polygon in plan).
Sides or soffits of beams, beam haunchings, cantilevers, girders, bressumers and lintels not exceeding 1m in depth.
2nd class (local first class) brick work in foundation and plinth in cement mortar 1:4 (1 cement: 4 coarse sand)
Half brick masonry 2nd class (local 1st class) in cement mortar 1:4 (1 cement: 4 coarse sand) in superstructure.
Providing wood works in frames of doors, windows, clerestory windows & other frames, wrought framed & fixed in position
Local best quality Uningthou
P/F 40 mm. thick panelled, glazed or panelled and glazed shutters for doors, windows and clerestory windows i/c bright finished brass hinges (with Ordinary type) with necessary screws.
First class Uningthou wood
Providing wood work in frame of false ceiling, partition etc sawn & put up in position.
Uchan/Tairen wood
Providing 40 x 3 mm flat iron hold fast 40 cm long i/c fixing to frames with 10 mm dia bolts nuts & wooden plugs & embedding to cement concrete block 30 x 10 x 15 cm 1:3:6 (1 cement:3 coarse sand:6 stone aggregate 20 mm nominal gauge).
Providing & fixing M.S. pressed butt hinges bright finished with necessary screws etc. complete.
Providing and fixing M.S. sliding bolts bright finished or black enamelled with nuts & screws etc. complete.
Providing & fixing M.S. Tower bolts (barrel type) with screws etc. complete.
Providing & fixing M.S. handles with necessary screws etc. complete.
Providing and fixing M.S. hooks and eyes.
Providing and fixing 20mm plank as eave board with :-
(Tolhao/Uchan wood
Steel work welded in built up sections, framed work in cutting, hoisting, fitting in position & priming coat of red lead paint .
In trusses & trussed purlins upto 25m span & 15m over all height.
50 mm cement concrete flooring 1:2:4 (1 cement: 2 coarse sand:4 stone aggregate 20 mm & down gauge) finished with a floating coat of neat cement.
Corrugated G.I. sheet 24 B.G. fixed with galvanised iron J or L hooks 8 mm dia G.I. limpet & bitumen washer complete, excluding the coat of purlins rafter & trusses.
Ridges or hips 610 mm over all in plain G.I. sheet 24 B.G. fixed with galvanised iron J or L hooks 8 mm dia G.I. Limpet & bitumen washers complete.
Providing & fixing 3 mm thick Commercial Ply sheet ceiling with beading 62 mm X 12 mm of Uchan wood complete (frame work to be paid separately).
12 mm cement plaster 1:4 (1 cement: 4 coarse sand).
Distempering (two or more coats) with oil bound washable distemper of approved quality on new work i/c priming coat to give an even shade.
Finishing walls weather shield paint of approved quality on new work(three or more coats) to give even shade.
Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete.
Painting (two or more coats) with superior gloss enamel paint of any shade of approved quality on new work to give an even shade.
Painting (one or more coats) with black Japan to give an even shade.
Floor painting (two or more coats) of red stone teak, chocolate grey or black shade with enamel paint for flooring of approved quality on new works, to give an even shade.
Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm Sand Cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:
White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required:
White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P.
Providing and fixing rubber plug for sink or wash basin
Providing and fixing grating of approved quality for Nahni trap.
100 mm nominal diameter
Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.
Flexible pipe
32 mm dia
Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS: 13983 with C.I. brackets, 15 mm CP brass pillar taps and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required :
Kitchen sink with drain board
510x1040 mm bowl depth 250 mm
Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing :
Oval shape 450x350 mm (outer dimensions)
Providing and fixing UPVC soil, waste, rain water and vent pipes including all requisite fittings, jointing of pipes & fittings with solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in charge
110mm dia
Providing and fixing brass bib cock of approved quality.
15 mm diameter (Ordinary)
Providing and fixing brass stop cock of approved quality.
Providing and fixing C.P. brass shower rose with 12.5 mm or 19 mm inlet
100 mm diameter
Providing and fixing Water Storage Tanks with 400 mm diameter nominal base G.I. overflow tube 25 mm nominal G.I. inlet and 15 mm nominal G.I. outlet tube i/c hoisting a height of 10 m above ground level.
1000 litres net capacity storage tanks
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.
Internal work - Exposed on wall
20 mm nominal outer dia Pipes
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.
External work
25 mm nominal outer dia Pipes
P/L Himalyan tiles for septick tank
Providing and Fixing DYNA fencing
1.83 m high DYNA fencing with angle iron posts 2.13 m long 50x50x6 mm plates at every 2.44 m apart embedded :10 stone/agg/40mm gauge) 30.5x30.5x61 cm corner and at every 12th posts to be strutted, provided with 2(two) horizontal lines of Angle iron and flat iron1 (0ne) i/c earth work in excavation etc complete.
Steel work welded in built up sections, framed work in cutting, hoisting, fitting in position & priming coat of red lead paint .
In gratings, framed guard bars, ladders, railings, brackets and similar works.
Construction of Security Barrack
Earth work in excavation in foundation trenches or drains including dressing of sides and ramming of bottoms lift upto 1.5 metres including getting out the excavated soil and disposal of surplus excavated soil as directed within a lead of 50 metres
Filling available excavated earth (excluding rock) in trenches, plinth sides of foundation etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering lead upto 50 metres lift upto 1.5 metre
1/3 of item no.1
Filling in plinth with sandy soil under floors including watering ramming, consolidating and dressing complete.
CONCRETE WORKS
Providing and laying cement concrete in foundation and plinth excluding the cost of centering and shuttering in
1:5:10 (1 cement : 5 coarse sand :10 graded stone aggregate 40 mm nominal size)
Providing plinth protection 50 mm thick in cement concrete 1:3:6 (1 cement:3 coarse sand:6 graded stone aggrt. of 20 mm nominal size) i/c finishing the top surface of concrete smooth.
Providing under layer for plinth protection of 75 mm thick rammed & consolidated & grouted with fine sand including preparation of ground
REINFORCED CEMENT CONCRETE WORK
Providing and laying in position specified grade of reinforced cement concrete,excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :
1:1.5:3 (1 cement: 1.5 coarse sand: 3 graded stone aggregate 20 mm nominal size).
Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers,abutments, posts and struts etc. up to floor five level excluding cost of centering,shuttering, finishing and reinforcement :
1:1.5:3 (1 cement: 1.5 coarse sand: 3 graded stone aggregate 20 mm nominal size).
Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills,staircases and spiral stair cases up to floor five level excluding the cost of centering,shuttering, finishing and reinforcement, with
1:1.5:3 (1 cement: 1.5 coarse sand: 3 graded stone aggregate 20 mm nominal size).
STEEL REINFORCEMENT
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete
FORM WORK
Providing form works i/c centering and shuttering so as to give a rough finish, strutting and propping etc. height of propping and centering below supporting floor to ceiling not exceeding 4 m and removal of the same for in-situ reinforced concrete and plain concrete work in
Foundation, footings, bases of columns etc. and mass concrete.
Columns, pillars, posts and struts (square, rectangular or polygon in plan).
Sides or soffits of beams, beam haunchings, cantilevers, girders, bressumers and lintels not exceeding 1m in depth.
BRICK WORK
2nd class (local first class) brick work in foundation and plinth in cement mortar 1:4 (1 cement: 4 coarse sand)
Half brick masonry 2nd class (local 1st class) in cement mortar 1:4 (1 cement: 4 coarse sand) in superstructure.
WOOD WORK
Providing wood works in frames of doors, windows, clerestory windows & other frames, wrought framed & fixed in position
Local best quality Uningthou
P/F 40 mm. thick panelled, glazed or panelled and glazed shutters for doors, windows and clerestory windows i/c bright finished brass hinges (with Ordinary type) with necessary screws.
First class Uningthou wood
Providing wood work in frame of false ceiling, partition etc sawn & put up in position.
Uchan/Tairen wood
Providing 40 x 3 mm flat iron hold fast 40 cm long i/c fixing to frames with 10 mm dia bolts nuts & wooden plugs & embedding to cement concrete block 30 x 10 x 15 cm 1:3:6 (1 cement:3 coarse sand:6 stone aggregate 20 mm nominal gauge).
Providing & fixing M.S. single acting spring hinges bright finished with necessary screws.
Providing and fixing M.S. sliding bolts bright finished or black enamelled with nuts & screws etc. complete.
Providing & fixing M.S. Tower bolts (barrel type) with screws etc. complete.
Providing & fixing M.S. handles with necessary screws etc. complete.
Providing and fixing M.S. hooks and eyes.
STEEL WORKS
Steel work welded in built up sections, framed work in cutting, hoisting, fitting in position & priming coat of red lead paint .
In trusses & trussed purlins upto 25m span & 15m over all height.
Steel work welded in built up sections, framed work in cutting, hoisting, fitting in position & priming coat of red lead paint .
In gratings, framed guard bars, ladders, railings, brackets and similar works.
FLOORING
50 mm cement concrete flooring 1:2:4 (1 cement: 2 coarse sand:4 stone aggregate 20 mm & down gauge) finished with a floating coat of neat cement.
Corrugated G.I. sheet 24 B.G. fixed with galvanised iron J or L hooks 8 mm dia G.I. limpet & bitumen washer complete, excluding the coat of purlins rafter & trusses.
Ridges or hips 610 mm over all in plain G.I. sheet 24 B.G. fixed with galvanised iron J or L hooks 8 mm dia G.I. Limpet & bitumen washers complete.
Providing & fixing 3 mm thick Commercial Ply sheet ceiling with beading 62 mm X 12 mm of Uchan wood complete (frame work to be paid separately).
Steel glazed windows and ventilators of standard rolled steel section joints mitred and welded with 15 x 3 mm lugs 10 cm long with steel plugs embedded in cement concrete block 15 x 10 x 10 cm of 1:3:6 (1 cement : 3 coarse sand : 6 stone aggregate 20 mm nominal size) or wooden plugs and screws of rawl plugs and screws or with fixing clips with bolts and nuts as required including providing and fixing of 4 mm thick glass panes with glazing clips complete including applying a priming coat of approved steel primer excluding cost of metal beadings and other fittings except necessary hinges or pivots as required.
Ready made steel windows (side hung)
FINISHING
12 mm cement plaster 1:4 (1 cement: 4 coarse sand).
Distempering (two or more coats) with oil bound washable distemper of approved quality on new work i/c priming coat to give an even shade.
Finishing walls weather shield paint of approved quality on new work(three or more coats) to give even shade.
Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete.
Painting (two or more coats) with superior gloss enamel paint of any shade of approved quality on new work to give an even shade.
Painting (one or more coats) with black Japan to give an even shade.
Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm Sand Cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:
White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required:
White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P.
Providing and fixing rubber plug for sink or wash basin
Providing and fixing grating of approved quality for Nahni trap.
100 mm nominal diameter
Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.
Flexible pipe
32 mm dia
Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS: 13983 with C.I. brackets, 15 mm CP brass pillar taps and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required :
Kitchen sink with drain board
510x1040 mm bowl depth 250 mm
Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing :
Oval shape 450x350 mm (outer dimensions)
Providing and fixing UPVC soil, waste, rain water and vent pipes including all requisite fittings, jointing of pipes & fittings with solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in charge
110mm dia
Providing and fixing brass bib cock of approved quality.
15 mm diameter (Ordinary)
Providing and fixing brass stop cock of approved quality.
Providing and fixing C.P. brass shower rose with 12.5 mm or 19 mm inlet
100 mm diameter
Providing and fixing Water Storage Tanks with 400 mm diameter nominal base G.I. overflow tube 25 mm nominal G.I. inlet and 15 mm nominal G.I. outlet tube i/c hoisting a height of 10 m above ground level.
1000 litres net capacity storage tanks
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.
Internal work - Exposed on wall
20 mm nominal outer dia Pipes
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.
External work
25 mm nominal outer dia Pipes
P/L Himalyan tiles for septick tank
Providing I.E.I in Security Barrack & Chowkidar Qtr
Sub-Head No. I (Wiring)
Wiring for light point / Fan point / Exhaust Fan point / Call bell point with 1.5 mm2 FR PVC insutated copper conductor single core cable in PVC casing & capping with modular type switch, modular plate suitable size, G.I-box and earthing the point with 1.5 mm2 FR PVC insulated copper conductor single core cable etc. as reqd.
a) Light Point (Group-B)
b) Ceiling Fan Point (Group-B)
d) Exhaust fan Point ( Group - B )
Wiring for light point / Power Plug point with 2 x 4 mm2 FR PVC insutated copper conductor single core cable in PVC casing & capping along with 1 no. 4 mm2 FR PVC insulated copper conductor single core cable for loop earthing etc. as reqd.
Wiring for circuit / Sub - main wiring along with wire with ( the following size of ) PVC insulated copper conductor single core cable in PVC cassing & capping etc. as reqd.
1. 2 x 1.5 mm2 + 1 x 1.5 mm2 earth wire
2. 2 x 2.5 mm2 + 1 x 2.5 mm2 earth wire
3. 2 x 4 mm2 + 1 x 4 mm2 earth wire
Sub-Head No. II (Fitting & Switch Gear)
Providing and Fixings ( following capacity TP & N ) dis-connector fuse switch unit inside the existing cubical panel board with ISI marks HRC fuses including drilling holes in the cubical panel board, making connection as reqd.
2. amp. TP & N
S/F ( following rating) double pole 240 V isolator in the existing MCB DB complete with connection, testing and commissioning as reqd.
Supplying and fixing 5 amp to 32 amp rating 230 V 'B' series MCB for lighting and other load of (following poles) in the existing MCB DB complete with connection, testing and commissioning etc. as reqd.
1. Single Pole
S/F 48 " sweep (1200 mm) A.C ceiling fan complete with down rod, canopy, 3 (three ) blades but without regulator etc. as reqd. ( Make Bajaj / Usha or similar )
Supplying & Fixing stepped type electronic Fan Regulator on the existing modular plate switch box i/c connection but excluding modular plate etc. as reqd.
S/F 380 mm sweep exhaust fan complete with all accessories i/c connection etc. as reqd.
S/F 20 W CFL lamp
Square PVC box 12mm to 32 mm ( 3 " x 3" )
S/F 3 pin 5 amp ceiling rose on the existing junction box / wooden block i/c connection etc. as reqd.
S/F Brass Batten / Angle holder i/c connection etc. as reqd.
Supply & Fixing( following piano type switch / socket) on the existing switch box / cover i/c connection etc. as reqd.
5/6 amp switch
3 pin 5/6 amps socket outlet
15/16 amps switch
6 pin 15/16 amps socket outlet
S/F of PVC box ( 200mm x150mm x75mm)
S Ratankumar Singh
Kshetrimyum Iboyaima Singh
stage.html
html • 0.02 MB
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .