Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹24.3 LAccepted-AOC | L1 | Accepted-AOC Reasonable | |
| 2 | L2₹28.0 L+₹3.7 L (15.4%)Rejected-Finance SHOP NO 10 367 SOMWAR PETH NARPARTGIRI CHOWK PUNE 411011 | PUNE | MAHARASHTRA | 411011 | L2 | Rejected-Finance Quoted high rates | |
| 3 | L3₹29.7 L+₹5.5 L (22.5%)Rejected-Finance 171 NARAYAN PETH PUNE PUNE MAHARASHTRA 411030 | PUNE | MAHARASHTRA | 411030 | L3 | Rejected-Finance Quoted high rates | |
| 4 | L4₹31.6 L+₹7.3 L (30.3%)Rejected-Finance 11 97 SADALATLIGUDA CHOWDARIGUDA HYDERABAD TELANGANA 500088 | MEDCHAL MALKAJGIRI | TELANGANA | 500088 | L4 | Rejected-Finance Quoted high rates | |
| 5 | L5₹41.5 L+₹17.2 L (70.9%)Rejected-Finance | L5 | Rejected-Finance Quoted high rates |
Tender Value
₹31.8 L
EMD Value
₹63,600
Closing Date
2 Dec 2021, 6:00 pmClosed
GE NDA KHADAKWASLA
GE NDA KHADAKWASLA
COMPREHENSIVE MAINT OF BIO GAS PLANT AND REFILLING AND REPLACEMENT OF FILTER BED MEDIA OF WATER FILTERATION PLANT AT NDA KHADAKWASLA
2021_MES_485563_2
8558/E8
Open Tender
Civil Works
Item Rate
180 days
GE NDA KHADAKWASLA
As per tender documents
9 documents required · 9 mandatory
₹500
Yes
GE NDA KHADAKWASLA
₹63,600
Yes
31 Dec 2021
17 Nov 2021
4 Dec 2021
17 Nov 2021
2 Dec 2021
20 Nov 2021
18 Nov 2021 - 19 Nov 2021
Amount
Supply, Install, Testing & Commissioning of MCC Panel Factory made up CRCA sheet 3.15mm thick CPRI approved, vermin & dustproof, suitable for 3 phase, 4wire, 1.1KV with colour coded Al Bus bar, danger notice board, Panel Fabrication Type : Single Door, Compartmentalized, Fixed Type Panel Front Access, RAL-7032, IP54, Panel Size - 2.1m (H) x 1.1m (W) x 0.6m (D) with all necessary MPCB, MCB, Power Contractor, Push Button - Start /Stop, NO/NC Contact for Push Button, RED Indication Lamp - Start/Stop/Trip (220VAC) including following Motor controller for smooth running of Bio-Gas Plant all as diretced:- (a) 0.75 Kw DOL starter for Feed Pumps - 02 Nos (b) 2.25 Kw DOL for Blower, Agitator, Submersible Pump - 05 Nos (c) 3.75 Kw DOL for DOL starter for Shredder-01 Nos
Supply and Fixing of Hot Deep Galvanized cable try 25 Mtr with support including rerouting of existing armored cables of complete with all necessary assessories suitable for smooth running of Bio-Gas Plant all as directed.
Supply and Installation of Mechanical Shredder with 5HP Motor,3 Phase, 1440 RPM of crushing cappacity 500Kg/Hr of Dimension suitable size Cutter Ring - "4140" High Carbon Alloy Steel, Impeller - SS304, Grinding Chamber - Casting with outlet, Table & Sink - SS304, Electric Switch - Reverse Forward Switch, Output - Slurry Type with all necessary grounting arrengement and necessary assessories suitable for smooth running of Bio-Gas Plant all as directed.
Supply of Segregation table thick of 2x1 Mtr size made up of SS 304 grade 1.5mm thickall as directed.
Suply and Installation of Gas Ballon Cap 40 Cum weight 750GSM as per existing specification complete with all necessary assessories suitable for smooth running of Bio-Gas Plant all as directed.
Supply, Install, Testing & Commissioning of Solar Hot Water system, Cap 500 LPD (FPC/ Tube type), Non pressurised, 2mm Crystal Blue Glass Coating Inner Tank with 10 Years Warranty with Cold Water storage PVC tank of suitable capacity and its necessary fabrication and plumbing material ( Pipe, Tee,elbow, sockets etc up tp Diagester) complete with all necessary assessories suitable for smooth running of Bio-Gas Plant all as diretced.
Supply and Installation of Aluminium Cladding of Bio-Digester tank two in Nos (size 4mtr in height & 4.5 Mtr in dia and 5 Mtr in height & 5 Mtr in dia) with Insulating Material Rockwool 50mm Thicknbess, 50mm Density with necessary assessories suitable for smooth running of Bio-Gas Plant all as directed.
M&L for MS work in framed bracket of angles or Tees with web and flanges cut to shape , drilled and countersunk for screw including bending and welding angles as necessary gusset plate, riveting etc n ecx 10 kg each bracket conforming to Fe290 Gde-E-165 with tie bar screwed ends, nut, washers and MS plates conforming to Fe290 Gde-E-165 all as required.
S&F Screw Press type Continuous discharge type De-watering, Feed Capacity - 400-500 Kg/hr, Machine RPM - 15 to 26 RPM, Discharge Control - SS304 Adjusting Cone, Press Casing - Feed Box SS304, Discharge Box SS304, Screw-SS304 plate fitted on MS Shaft, Screen - SS304, Base Frame - MS, Motor - 5 HP/1440 RPM/440 W, Output - Slurry Type complete all as directed.
S&F Slurry Feed Pump, suitable for 0.8 LPS to 4.6 LPS, 6-15 Mtr, self primming. 0.75KW, CI impeller,Shaft CS complete all as directed.
S&F FRP Grating of Existing Tank Covers ( 4mtr x 15 mtr aprox) as per standerd specification complete all as directed.
Providing Operatioal trainning to staff and Line Diagram of complete operation of Bio-Gas Plant o flex board size suible for presentation with necessary marking on equpment including all necessary connected work all as directed.
Commissioning and Testing of existing Pre-Digester, Digester 1 and Digester 2 scrubbing with wire brush and cleaning complete with provision of required quantity of culture of std quality for generation of Bio-Gas and servicing/repairing of all existing Pump, motor and compressor of a capacity upto 5HP and any other minor issues rectification all as directed.
Providing services for removal of Filter Bed Media (Gravel & Sand) from Filter Bed of Size 6.5 x 4.5 mtr upto 1.5 mtr in depth as per existing arrengement and as per standerd practices as mentioned below within the stipuilated time period by employing suitable no of labour with necessary tool and plant to complete work on or before the stipulated time including cleaing of filter bed media (Gravels only) with fresh/clean water till complete removal of tiny dirt deposite on gravel and make it suitabel to reuse and proper segragation Gravels and sand complete all as directed. A) Existing Layer of Media: 1) First Layer with Gravels of size 40mm size upto 300mm at the bottom of Bed. 2) Second Layer with Gravels of 30mm size upto 300mm above the first layer. 3) Third layer with Gravels of 20mm size upto 300mm above the second layer. 4) Forth layer with sand 0.35-0.5mm size upto 600mm aobe the third Layer. Note : 1) One bed will be handed over at one time to complete said Job. 2) Contractor is responsible to complete the said job within stipulated time period of shutdown by deploying sufficient labour at a time.
Providing services for Refilling ( Loose) of Filter Bed Media (Old Gravel and newly provided Quartz sand) inside Filter Bed of Size 6.5 x 4.5 mtr upto 1.5 mtr in depth as per existing arrengement and as per standerd practices as mentioned below within the stipuilated time period by employing suitable no of labour with necessary tool and plant to complete work on or before the stipulated time complete all as directed : A) Laying of Media: 1) First Layer with Gravels of size 40mm size upto 300mm at the bottom of Bed. (Old Gravel retrieved from Item No 14 above) 2) Second Layer with Gravels of 30mm size upto 300mm above the first layer. (Old Gravel retrieved from Item No 14 above) 3) Third layer with Gravels of 20mm size upto 300mm above the second layer. (Old Gravel retrieved from Item No 14 above) 4) Forth layer with sand 0.35-0.5mm size upto 600mm aobe the third Layer.Providing services for all as directed. (Quartz sand supplied under Item No 16 below) Note : 1) One bed will be handed over at one time to complete said Job. 2) Contractor is responsible to complete the said job within stipulated time period of shutdown by deploying sufficient labour at a time.
Supply only Fresh Quartz sand of size 0.45mm to 0.70mm and coefficient of uniformity shall be netween 1.3 to 1.7 and silica content should be not less than 90% complete all as directed.
M/S - ASHOK ELECTRICALS
KESARI AND SONS
Deccan Enterprises
Bharekar Construction
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .