Establishing 2x31.5MVA 66/11kV GIS substation at Royal County(Kothnur) - Bengaluru South Taluk, Bengaluru Urban District & 0.145km 66kV 1000sqmm, DC UG Cable by LILO of existing 66kV 1000Sqmm Khodays-South city SC UG cable on Partial Turnkey Basis (excluding Supply of 11kV Switchgear)

CABLE SUPPLY PORTION-Work Indent-2946:

66 kV (Earthed), 1C X 1000 Sq mm stranded, annealed, copper conductor, segmental, compact, circular, (Milliken), conductor screen, cross linked polyethylene (XLP...

Indoor type cable termination (plug in dry type) suitable for GIS modules conforming to IEC 62271-209 for 66 kV, 1000 Sq mm, copper conductor, XLPE insulated lead sheathed cable as per technical speci...

Insulated Joint suitable for 66 kV, 1C X 1000sqmm, copper conductor, XLPE insulated, lead sheathed cable complete with all accessories as per technical specification.

3-Phase link Box without SVL suitable for 66kV,1000sqmm UG cable including 240 Sq mm sheath bonding cable as per the technical specification.

66kV 3-phase Link Box without SVL including 240 Sq mm sheath bonding cable and 240-240 Sq mm Coaxial cable as per the technical specifictions. The Link box shall be buried type, water proof (capaable ...

Optical Fibres and accessories:

48 Fibre Single mode Unarmoured Under Ground Optic Fibre Cable as per technical specifications

Polyvinyl lubricated bond (PLB) HDPE pipe outer dia 40mm

Line interface unit suitable for 48F

Straight Joint closure kit suitable for 48F OFC

Collars for PLB pipe

Fiber to Ethernet Media convertor: 10/100/1000 Mbps

Data Concentrator Unit (DCU)

STATION SUPPLY PORTION-Work Indent-2946:

Power Transformers:

3Ph, 50Hz, Core Type, 2 winding Delta / Star, Vector Group: Dyn11, OLTC, ONAN/ONAF with Fan control cubicle RTCC Panel, with optic fibre t...

Nitrogen injection fire extinguishing system with fire extinguishing cubicle, control box, conservator isolation valve, fire detector, signal box, online testing facility, etc. (including Erection) as...

Metal encapsulated SF6 gas insulated Switchgear 40kA rating suitable for indoor installation of modular design:

(i) 66kV Line (U.G Cable) Module :

Each Module Comprising of the following:

Local Control cubicle for 66kV Line (U.G Cable) Module as per specification

iii) 66 kV Transformer Module (For 66/11kV - 31.5 MVA ):

Each Module Comprising of the following:

a) SF6 Circuit Breaker complete with operating mechanism , 1600A, 1phase/3phase - 1 No.

Local Control cubicle for Transformer Module (For 31.5 MVA - 66 kV Side) as per specification

iv) 66 kV Bus Coupler Module.

Each Module Comprising of the following:

a) SF6 Circuit Breaker complete with operating mechanism , 1600A, 1phase/3phase - 1 No.

b) Disconnector:

bi) 3 Phase, single p...

Local Control cubicle for 66 kV Bus Coupler & Bus PT Module as per specification

v) PT Module: 66kV ( 1 for each bus)

Each Module Comprising of the following:

a) Disconnector:

ai) 3 Phase, single pole, Group operated isolator switch complete with manual & motor driven operatin...

Bus Maintenance earth switch 3 Phase, single pole, Group operated Maintenance earthing switch complete with manual operating Mechanism - i) - 66 kV - (1 for each bus)

Oil filled Current Transformers:

11 kV NCT's of Ratio 2000-1200/1-1-1 A. (for NCT) (required for 66/11 kV Tr.) complete as per Technical specifications

Note:- The Characteristic of the above CT's sha...

60kV Surge arrester - Metal oxide with Surge counter Arrestor class: Discharge Class 3 (Station Medium Duty (SM) for Transformer) : with Terminal connector suitable for Drake conductor etc., as per T...

C&R Panel compatible to IEC 61850, communication protocol for Sub-station Automation System complete as per technical specification:

a) 66kV UG cable -Type 6L- (Annexure RPP4 -CABLE-SAS)

b) 66/11kV Transformer - Type 6T1 (Annexure RPP5-SAS)

c) 66 kV Bus Coupler - Type 6 BC (Annexure RPP6 - SAS)

d) 11 kV Line - Type 1L (Annexure RPP7 - SAS)

( Provision for 2 line feeders to be made in one panel) (provision for 1 line & 1 Bus coupler to be made in one panel).

e) Numerical differential cum distance relay.

Note: The Numerical differential cum distance relays of same make already existing at Khodays & South city substation shall be provided, installed in the ...

2) Substation Automation System

Complete substation Automation System including hardware and software for substation and for operation from remote control centre along with associated equipment as per...

Total - Mild Steel of Mounting Structures (excluding Bolts & nuts)

Total - Bolts & nuts of Mounting Structures

a)Drake ACSR conductor

Station Auxiliary Transformer with oil, outdoor type, 100 kVA, 11 kV/433 V, 3 Ph, Copper winding, Vector group-Dyn11, off load tap changer (with 5 taps) with step voltage of 2.5% along with DOLO/H-G ...

A) LTAC Panel (indoor) 415V, as per Technical specification comprising of Volt Meter, Ammeter, ETV meter 2No's I/C ACB 200A + 4No's of SFU 63A,12 OG 32 A, 1 BC 200A,1DG switch 300 A etc., complete.

1.1kV PVC insulated 240sqmm Al. Cable, 3.5 core with glands / lugs / ferrules. (To be run from Auxillary transformer to LTAC panel)

1.1kV PVC insulated 70sq.mm Al. Cable, 3.5 core with glands / lugs / ferrules.

AC distribution box single front type, 6 terminals, 750x1350x300 mm, 1 I/C of 100A, MCCB 20KA + 6 O/G MCB 16A + 1 O/G of 100A , HRC fuse.

D.G.Set: 3 Ph, 50 Hz, 415V, 0.8 PF, 25 KVA capacity including Erection as per Technical specifications

STATION BATTERY , BATTERY CHARGER:

i) Station Battery: 220V 300AH battery set consisting of 110 No. cells per bank with accessories as per specifications.

ii) Battery Charger: Battery Charger Suitable for 2x220 V, 300AH ( with 2No's of float and 2No's of boost Charger including control panels, change over arrangement etc., complete as per technical spec...

Capacitor Bank: Design Engineering, supply of 12.1kV, 6MVAR, Switchable Type capacitor bank(2 MVAR each) with series reactor, NCT, LA etc. as per Technical specification alongwith 10% Spare capacitors...

PVC insulated Copper Control Cable with Lugs / Ferrules. 1.1 kV class:

19 Core 2.5 Sq.mm. Copper Control Cables

10 Core 2.5 Sq.mm. Copper Control Cables

4 Core 2.5 Sq.mm Copper Control Cables

4 Core 6.0 Sq.mm. Copper Control Cables

4 Core 16 Sq.mm. Copper Control Cables

4 Core 4.0 Sq.mm. Copper Control Cables

2 Core 6 Sq.mm. Copper Control Cables (for yard lighting)

2 Core 70 Sq.mm Copper Control Cables

2P x 0.5 sqmm screened twisted pair cable.

4P x 0.5 sqmm screened twisted pair cable.

11 kV UG Cable with the required cable terminations at both ends.

11kV XLPE 95Sq.mm Aluminium Cable-3 Core (For two auxiliary transformers from the 11kV Switchgear)

11kV XLPE Cable, 1C x 1000Sq mm, 11kV HV UG Cable - 3x4 runs of IC x 1000Sq.mm cable from 66/11kV Transformers to 11kV Switchgear

11kV XLPE 400Sq.mm Aluminium cable -3 core (for capacitor Bank)

Cable termination kits suitable for following sizes as per Technical Specification:

i) 3C X 95sqmm: 11kV Heat Shrinkable Indoor type cable termination kit for XLPE Cable- - Indoor

ii) 1000 sq mm Single Core. 11kV Heat Shrinkable Cable termination kit for XLPE Cable:

a) Indoor ( For 31.5 MVA Transformer)

b) Outdoor ( For 31.5MVA Transformer )

iii) 400Sqmm 3 core - Indoor

iii) 66 kV UG cable with the required cable terminations:

i) 66 kV (Earthed), 1C X 630 Sq mm stranded, annealed, copper conductor, circular, conductor screen, cross linked polyethylene (XLPE) insulati...

ii) Pre moulded Outdoor type cable end termination suitable for 66 kV, 1C X 630 Sq mm, copper conductor, XLPE insulated, lead sheathed cable as per technical specification (as per specification) (for ...

iii) Indoor type cable termination (plug in dry type) suitable for GIS modules confirming to IEC 60859 for 66kV, 630sqmm, copper conductor,XLPE insulated cable as per technical specification. (for 66/...

iv)Three phase cross bonding Link box with SVL including 240 Sq mm sheath bonding cable and 240/240 Sq mm co-axial cable as per technical specification suitable for 66 kV, 630sqmm UG Cable. The Link b...

v) Single phase Link box outdoor structure mounting type, with SVL suitable for 66kV, 630sqmm UG cable including 240 Sq mm sheath bonding cable as per the technical specification (for 66kV side of 31....

FIRE FIGHTING EQUIPMENTS WITH NECESSARY MOUNTING STANDS:

a)Mechanical Foam Extinguisher Type

b)Water Type (Gas Pressure Type) - 9.0 litres

c)Carbon-di-oxide Type - 4.5 Kgs.

d) Dry Chemical Powder type - 6.0 kg

e)Sand type G.I Buckets 9 Ltr. Capacity

ii. Steel stands

g) Addressable Type Fire Alarm / Detection system using smoke detectors, heat detectors etc., as per specification for GIS hall control room, relay panel room, LTAC room, office room, monitoring room ...

Station and Yard Lighting / Lightning Protection (Outdoor):

Station and Yard lighting: (Outdoor) Lightning / Lighting Masts(LM).

Remarks: Lightning / Lighting Mast (LM) are proposed for lightning pro...

Supply of LED Street light luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded poly...

Maintenance Tools and Plant

Earth resistance tester

Welding machine (arc welding) 10 KVA

Grounding sticks extendable upto 18 ft : 3 No's of each 6ft Sticks of 3 Phase R, Y, B( 3 Nos of 1 set)

Manila rope 1" (bundle of 100m)

Manila rope 3/4" (bundle of 100m)

Files of Various sizes (One Set - 6 Nos)

Portable drilling machine with stand heavy duty

Hand drilling machine

Safety Helmets with rachet

Steel measuring tape 30 meters

Steel measuring tape 15 meters

Insulation Tester Digital Type (megger) 2.5 - 5 kV

Miscellaneous items like rubber mats, first aid box, danger boards, shock treatment charts, water filter door locks, fixograph, substations name board, and other sundry items (sizes / capacities to be...

Shock treatment charts, hard board, laminated with coloured pictures & literature both in Kannada & English.

Water filter/ Water purifier: Wall mounting type (Aqua - guard type)

Sub-station name board duly painted as per specification including erection & Civil Works.

Fixograph of size 1.5m X 2.5m with English/ Kannada alphabets.

Door locks 7 levers (Navtal make)

Danger board ( prohibited ) with support structure including fixing in front of the gate

Single Line diagram

Equipments name plates, LC, HT, LS plates and earthing name plates including fixing at outdoor yard

Furniture for Control Room Staff and Maintenance Staff :

Steel Almirahs 6 1/2 feet

Steel Almirahs 6 1/2 feet with glass panel doors.

Officer's tables

Steel slotted angle rack (big size)

Steel slotted angle rack (small size)

Steel dust bins

Executive Revolving chairs

S type arm chairs

Steel folding chairs

Station Mandatory spare supply

STATION MANDATORY SPARES SUPPLY PORTION-Work Indent-2946:

For GIS Common Spares, Maintenance and Testing Tools:

SF6 gas-10% of total gas requirement subject to min. of 30Kgs.

CIRCUIT BREAKERS:- GIS

SF6 CIRCUIT BREAKER:

66kV, 1600A Circuit Breaker interrupting chamber complete with all necessary apparatus.

Rubber gaskets, 'O' rings and seals

Trip coils with resistor.

Closing coils with resistor

Relays, Power contactors, push buttons, timers & MCB etc.

Closing assembly/ valve

Trip assembly/ valve

Pressure switches

Auxiliary switch assembly

Operation Counter

Rupture disc/diaphragm

Windoscope / Observing window

b) 66 kV, 1600A Circuit Breaker operating mechanism, complete with all necessary connecting apparatus.

All types of coupling for SF6 gas(1 no. each type)

ISOLATORS & E/SWITCH GIS

66 kV, 1250A disconnecting & maintenance earthing Switch internal parts, complete with all necessary gaskets, mounting hardware, etc.

Operating mechanism of 66 kV, 1250A Disconnecting Switch, complete with all necessary connecting apparatus.

66 kV, single phase high speed fault making Earthing switch, Internal parts complete with all necessary gaskets mounting hardware etc.

Operating mechanism of 66 kV, 1250A high speed fault making Earthing switch, complete with all necessary gaskets connecting apparatus.

Limit switch & Aux. switches

CURRENT TRANSFORMER - GIS:

66 kV Complete CT (1 no. of each rating)

VOLTAGE TRANSFORMER - GIS:

Single phase VT complete with all gaskets and mounting hardware. (66 kV) (1 no. of each rating)

SURGE ARRESTOR - GIS:

Complete L.A. including with Surge counter & accessories

(i) 66 kV (1 no. of each rating)

MANDATORY SPARES FOR POWER TRANSFORMER

Oil collecting bottle

Terminal connector clamps:

a)    Suitable for 66 kV class bushing to suit single Drake ACSR

b)    Suitable for 11kV class bushing to suit Double Drake ACSR

Testing and Maintenance for GIS:

Portable SF6 gas leak Detector

Station Erection

STATION ERECTION (including Testing & commissioning) PORTION-Work Indent-2946:

Power Transformers:

3Ph, 50Hz, Core Type, 2 winding Delta / Star, Vector Group: Dyn11, OLTC, ONAN/ONAF with Fan control ...

Metal encapsulated SF6 gas insulated Switchgear 40kA rating suitable for indoor installation of modular design:

(i) 66kV Line (U.G Cable) Module :

Each Module Comprising of the following:

iii) 66 kV Transformer Module (For 66/11kV - 31.5 MVA ):

Each Module Comprising of the following:

a) SF6 Circuit Breaker complete with operating mechanism , 1600A, 1phase/3phase - 1 No.

iv) 66 kV Bus Coupler Module.

Each Module Comprising of the following:

a) SF6 Circuit Breaker complete with operating mechanism , 1600A, 1phase/3phase - 1 No.

b) Disconnector:

bi) 3 Phase, single p...

v) PT Module: 66kV ( 1 for each bus)

Each Module Comprising of the following:

a) Disconnector:

ai) 3 Phase, single pole, Group operated isolator switch complete with manual & motor driven operatin...

Bus Maintenance earth switch 3 Phase, single pole, Group operated Maintenance earthing switch complete with manual operating Mechanism - i) - 66 kV - (1 for each bus)

Oil filled Current Transformers:

11 kV NCT's of Ratio 2000-1200/1-1-1 A. (for NCT) (required for 66/11 kV Tr.) complete as per Technical specifications

Note:- The Characteristic of the above CT's sha...

60kV Surge arrester - Metal oxide with Surge counter Arrestor class: Discharge Class 3 (Station Medium Duty (SM) for Transformer) : with Terminal connector suitable for Drake conductor etc., as per T...

Total - 66kV C&R panels (with SAS)

d) 11 kV Line - Type 1L (Annexure RPP7 - SAS)

( Provision for 2 line feeders to be made in one panel) (provision for 1 line & 1 Bus coupler to be made in one panel).

Total -Station & Mounting Structures (including Bolts & nuts)

Station Auxiliary Transformer with oil, outdoor type, 100 kVA, 11 kV/433 V, 3 Ph, Copper winding, Vector group-Dyn11, off load tap changer (with 5 taps) with step voltage of 2.5% along with DOLO/H-G ...

A) LTAC Panel (indoor) 415V, as per Technical specification comprising of Volt Meter, Ammeter, ETV meter 2No's I/C ACB 200A + 4No's of SFU 63A,12 OG 32 A, 1 BC 200A,1DG switch 300 A etc., complete.

AC distribution box single front type, 6 terminals, 750x1350x300 mm, 1 I/C of 100A, MCCB 20KA + 6 O/G MCB 16A + 1 O/G of 100A , HRC fuse.

STATION BATTERY , BATTERY CHARGER:

i) Station Battery: 220V 300AH battery set consisting of 110 No. cells per bank with accessories as per specifications.

ii) Battery Charger: Battery Charger Suitable for 2x220 V, 300AH ( with 2No's of float and 2No's of boost Charger including control panels, change over arrangement etc., complete as per technical spec...

11kV Switchgear.

31.5 KA, 11 kV Class,Metal Clad VCB Switchgear (2000A for Incomer and 1250A for feeders) comprising of 2IC+1BC+18F+2CB

Capacitor Bank: 12.1kV, 6MVAR, Switchable Type capacitor bank(2 MVAR each) with series reactor, NCT, LA etc. as per Technical specification alongwith 10% Spare capacitors & mounting structure (The cap...

Total - Control cables

Total - 11kV cables

Cable termination kits suitable for following sizes as per Technical Specification:

i) 3C X 95sqmm: 11kV Heat Shrinkable Indoor type cable termination kit for XLPE Cable- - Indoor

ii) 11kV 1000sqmm Single Core, Heat Shrinkable Cable termination kit for XLPE Cable (indoor & outdoor type)

iii) 400Sqmm 3 core - Indoor

iii) 66 kV UG cable with the required cable terminations:

i) 66 kV (Earthed), 1C X 630 Sq mm stranded, annealed, copper conductor, circular, conductor screen, cross linked polyethylene (XLPE) insulati...

ii) Pre moulded Outdoor type cable end termination suitable for 66 kV, 1C X 630 Sq mm, copper conductor, XLPE insulated, lead sheathed cable as per technical specification (as per specification) (for ...

iii) Indoor type cable termination (plug in dry type) suitable for GIS modules confirming to IEC 60859 for 66kV, 630sqmm, copper conductor,XLPE insulated cable as per technical specification. (for 66/...

iv)Three phase cross bonding Link box with SVL including 240 Sq mm sheath bonding cable and 240/240 Sq mm co-axial cable as per technical specification suitable for 66 kV, 630sqmm UG Cable. The Link b...

v) Single phase Link box outdoor structure mounting type, with SVL suitable for 66kV, 630sqmm UG cable including 240 Sq mm sheath bonding cable as per the technical specification (for 66kV side of 31....

EARTH MAT FORMATION

Supplying and laying of MS flat 75*12 mm flat welding and applying ACB paint to welded portion and covering without sodium bentonite clay as per the drawing/standard specification ...

Grounding of equipments with 75*12 mm GI flat and connecting equipment to the earthmat/ground pit. Each point of earthing with all formation works like bending, twisting, drilling of holes and connect...

Providing 25 mm dia M.S. Rod 1.05 metre long earthmat spikes including heating, bending top 50 mm overlap flattening and making spike edge at one end driving into the earth below the ground level and ...

Grounding of equipment by providing cast iron pipe of 100 mm ID 13 mm thickness, 2.75 metre long with 2 part clamp out of G.I. Flat 50 X 6 mm continuously welded alround the pipe using cast iron weldi...

Supplying & providing 450 mm dia 450 mm height 1.5" to 2" thick hume pipe collar (non pressure type) for earth pits including all lead and lifts etc.,

CABLE ERECTION PORTION-WORK INDENT-2946:

Surveying of cable route, excavation trial holes as per field requirements, preparation of cable route profile drawings for cable laying, final route alignment...

Laying (including Testing & commissioning) of 66kV single core, 1000sqmm XLPE Segmental compact type miliken Copper cable in trefoil, tapping , fixing pipes for drain and gate crossing as per drawing...

Handling and making of Indoor type cable termination (plug in dry type) suitable for GIS modules conforming to IEC 62271-209 for 66 kV, 1000 Sq mm, copper conductor, XLPE insulated lead sheathed cable...

Handling and making Insulated Joint suitable for 66 kV, 1C X 1000sqmm, copper conductor, XLPE insulated, lead sheathed cable complete with all accessories as per technical specification with all consu...

3-Phase link Box without SVL suitable for 66kV,1000sqmm UG cable including 240 Sq mm sheath bonding cable as per the technical specification with connecting earth leads, all lugs, fixtures, clamps bol...

66kV 3-phase Link Box without SVL including 240 Sq mm sheath bonding cable and 240-240 Sq mm Coaxial cable as per the technical specifictions. The Link box shall be buried type, water proof (capaable ...

Laying of 48 Fiber unarmoured Under Ground FO cable (48F DWSM) as per drawings & specifications.

Handling and making Normal straight joint closures for 48Fiber unarmoured Under Ground FO cable with all consumables at site complete.

Handling and making Terminal joints for 48Fiber unarmoured Under Ground FO cable with all consumables at site complete.

Rectification of OFC laid from 220/66/11kV Khodays substation to 66/11kV South city substation, so as to provide communication between three stations i.e Khodays Glass Factory, South city and Kothanur...

CABLE CIVIL PORTION-Work Indent-2946:

Earth work excavation for laying of UG cable in open ground and beneath the road surface in different strata of soil by mechanical means including deposition o...

Earth work excavation for laying of UG cable in open ground and beneath the road surface in different strata of soil by mechanical means including deposition of earth on back with all leads and lif...

Earth work excavation for laying of UG cable in open ground and beneath the road surface in different strata of soil by mechanical means including deposition of earth on back with all leads and lif...

Dismantling of Flexible pavements and disposal of dismantled materials and stacking serviceable and unserviceable materials separately By Mechanical Mean Bituminous courses

Dismantling of Flexible pavements and disposal of dismantled materials and stacking serviceable and unserviceable materials separately By Mechanical Mean Granular course

Dismantling of cement concrete pavement by mechanical means using pneumatic tools, breaking to pieces not exceeding 0.02 m3 in volume and stock piling at designated locations and disposal of dismantle...

Providing M-Sand : Supplying and filling in plinth, foundations / UG cable work with approved M-sand including watering, ramming, consolidating and dressing. The rate includes the cost of material, la...

Supplying and Providing pre cast RCC Protection Covers using M20 grade Concrete, steel of approved size/shape (as per the approved drawings) to be laid in UG cable works. The rate includes the cost of...

Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cms in depth, compacting each deposited layer by ramming after watering with a lead upto 50 m, and lift upto 1.5...

Supplying and Providing Pre cast Cable Route/ Joint marker using M15 grade Concrete, MS rods of approved size/shape (as per the approved drawings) to be laid in UG cable works. The rate includes the c...

Supplying and construction of RCC Cable Joint Bays to accommodate jointing of UG Cable as per specifications, drawings. The rate includes the cost of material, labour charges, curing, form work, ce...

Providing and laying of warning tape / Caution tape / detector tape for HDPE pipes of 200 mm wide, 300 micron thick, blue in colour confoming to relevant ISS with latest amendments with appurtenances....

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...

Providing, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and unloading at both destinations and ...

Construction of Granular Sub-Base of grading VI material as per design mixing in a mechanical mix plant at OMC, carriage of mixed Material to work site, spreading in uniform layers with motor grader o...

Dense Graded Bituminous Macadam Grading - II for traffic lesser than 20 MSA

Providing and laying Dense Graded Bituminous Macadam with 120 TPH capacity HMP batch type using crushed aggregates of specif...

Bituminous Concrete Grading II for traffic lesser than 20 MSA

Providing and laying Bituminous Concrete with 120 TPH capacity hot mix plant batch type using crushed aggregates of specified grading, pre...

Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...

STATION CIVIL PORTION-Work Indent-2946:

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, sho...

Earth work excavation for pipeline trenches in all kinds of soils by mechanical means as per drawing and technical specifications, including setting out, construction of shoring, strutting, barricadin...

Construction of embankment with approved materials deposited at site from road way cutting and exacavtion from drain and foundation of other structures and excavated from levelling and lowering the gr...

Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...

Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...

Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...

Providing and laying in Cement Concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/ basalt crushed graded coarse aggregates and fine...

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...

Providing and laying in Cement Concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/basalt crushed graded coarse aggregates and fine aggr...

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...

Providing and laying in position Reinforced cement concrete for drain works. The ranite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with sup...

Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 ...

Steel Fabrication: Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/w...

Steel Fabrication: Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/w...

Providing and fixing Structural Steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a 2 coat of approved pa...

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by r...

Removal of Unserviceable Soil with Disposal upto a suitable distance as directed by the Engineer incharge of work

Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2...

Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) inc...

Providing 20 mm cement plaster of mix :1:6 (1 cement: 6 fine sand) to brick/stone masonary including rounding off corners wherever required smooth rendering, providing and removing scaffolding, includ...

Providing 12 mm cement plaster with cement mortar 1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of m...

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per sp...

Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops an...

Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content. With water thinnable cement primer on wall surface having VOC content

Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67 ltr/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with pai...

Providing Water based glossy paint (Green certified product) to Kerb Stones as per IS 164:2015 technical specifications including cleaning & surface preparation

Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direct...

Fencing with G.I. barbed wire Angle iron post placed at required distance embedded in cement concrete blocks, every 15th post, last but one end post and corner post shall be strutted on both sides and...

Providing S&S RCC SPUN / VIBRATED CAST PIPES (REINFORCED) pipes NP-3 Class conforming to IS:458-1988 with latest amentments using ordinary portland cement, for sanitary works and conveying to work ...

Providing S&S RCC SPUN / VIBRATED CAST PIPES (REINFORCED) pipes NP-3 Class conforming to IS:458-1988 with latest amentments using ordinary portland cement, for sanitary works and conveying to work ...

Providing Granite or trap or basalt size stone masonry in Cement Mortar 1:6, stones hammer dressed/chistle dressed as required in courses not less than 20/15cms high with bond stones at 2M apart in e...

Providing Flush/ Ruled pointing: Pointing on stone work with cement mortar 1:3 (1 cement : 3 fine sand) after raking joints to depth nicely lining, including cost of materials, labour, curing as per s...

Cutting transverse contraction joints in concrete road using concrete cutting machine with diamond studded saw as per standard technical specificatio and direction of engineer incharge of work includi...

Providing and filling joint sealing compound as per approved drawing and technical specification with coarse sand and 6 percent bitumen by weight.

Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...

Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...

Providing & fixing CPVC pipes having thermal stablity for hot & cold water supply, including all CPVC plain and brass threaded fittings, including fixing the pipe with clamps at 1.00M spacing. this in...

Providing & fixing CPVC pipes having thermal stablity for hot & cold water supply, including all CPVC plain and brass threaded fittings, including fixing the pipe with clamps at 1.00M spacing. this in...

Providing and fixing rainy make rain water filter of FL500 specification as per direction of engineer in charge of work.

Providing and fixing 1.5HP mono Submersible Pump Sets for Rain water sump with electrification Etc complete with testing of as per instructions of engineer incharge of work

Sinking of borewell of 165mm mm clear using Super fast hydrualic rig of capacity 3000PSIG and above 1100CMF and above in all strata including over burden upto 20 m fixing of casing pipe, collers and c...

Sinking of borewell of 165mm mm clear using Super fast hydrualic rig of capacity 3000PSIG and above 1100CMF and above in all strata including over burden upto 20 m fixing of casing pipe, collers and c...

Sinking of borewell of 165mm mm clear using Super fast hydrualic rig of capacity 3000PSIG and above 1100CMF and above in all strata including over burden upto 20 m fixing of casing pipe, collers and c...

Sinking of borewell of 165mm mm clear using Super fast hydrualic rig of capacity 3000PSIG and above 1100CMF and above in all strata including over burden upto 20 m fixing of casing pipe, collers and c...

Sinking of borewell of 165mm mm clear using Super fast hydrualic rig of capacity 3000PSIG and above 1100CMF and above in all strata including over burden upto 20 m fixing of casing pipe, collers and c...

Sinking of borewell of 165mm mm clear using Super fast hydrualic rig of capacity 3000PSIG and above 1100CMF and above in all strata including over burden upto 20 m fixing of casing pipe, collers and c...

Sinking of borewell of 165mm mm clear using Super fast hydrualic rig of capacity 3000PSIG and above 1100CMF and above in all strata including over burden upto 20 m fixing of casing pipe, collers and c...

Sinking of borewell of 165mm mm clear using Super fast hydrualic rig of capacity 3000PSIG and above 1100CMF and above in all strata including over burden upto 20 m fixing of casing pipe, collers and c...

Supply of ISI mark 175mm nominal bore,plain and steel casing pipe grade of steel Fe 410 of wall thickness conforming to IS 4270-2001 andlatest ammendments, electrical resistance welded steel tubes, ma...

Providing and laying at site of work MS casing caps as per IS 1239 (part- II) 1982 with all latest amendments if any for any dia. The thickness of plate used for covering one end shall be 3mm (minimum...

Geophysical investigation at site for sinking borewells for providing drinking water to the habitation either through the Hand Pump MWS or P.W.S.S, by vertical electrical sounding by adopting Venner o...

Providing, Single Phase Submersible Pump Sets of 100mm dia (4 inch) suitable for bore well confirming to IS 8034-2000 specifications, to work site with testing of as per instructions of engi...

Supply and delivery at site Brand new best make PVC insulated submersible cable of Flat 3 core (sheathed) of nominal cross sectional area as per IS 694-1990 with ISI Mark and as per its latest amendme...

PRESSURE GAUGE :

Supply and delivery at site of brand new best make pressure gauge bourdon type as per IS 778/1984 with ISI Mark and as per its latest amendments. For size 100mm

Supply and delivery at site of brand new best make gate valve as per IS 778/1984 with ISI Mark and as per its latest amendments.

NON - RETURN VALVE :

Providing and fixing in position 50mm dia nominal bore gun metal non-return valve horizontal type of approved make mark including cost of all materials, lab our and HOM of equipme...

Control panel board for borewell motor pumpset:

Supply, installing,testing and commissioning COMMON control panel consisting of the following INCOMING:1 No set of Phase indicating lamps with SFU of su...

POWER CAPACITOR :

Supply and delivery at site best indigenous brand new power capacitor as per IS 2834/1986 with latest amendments with KPTCL authorities and erection, electrification and commissionin...

Supply and delivery at site delivery of best indigenous brand new MCB(Miniature Circuit Breakers) of required capacity as per IS 88228/1978 and its latest amendments and with ISI Mark of 6/10/1...

Providing, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and unloading at both destinations an...

Erection elctrification & Commissioning works of pumpsets :

Labour Charges Including aligning and balancing with all necessary erection of materials and labour including supply & erection of two pai...

Main connections:

Providing main connection from pole PVC insulated sheathed steel wire cable in new trench as per IS 1554/ 1988 with latest amendments with ISI mark from KPTCL pole to meter board un...

ELECTRICAL ACCESSORIES:

Supplying of TPST with reqirable porcelain channels in SM enclosure, made out of 14 SWG powder coated paint of approved colour. 32 AMPS.

Supplying and fixing of Porcelain fuse channel with cut out on existing wooden/panel using necessary nuts, bolts and washers 32 AMPS

Providing & fixing CPVC pipes having thermal stablity for hot & cold water supply, including all CPVC plain and brass threaded fittings, including fixing the pipe with clamps at 1.00M spacing. this in...

Providing & fixing CPVC pipes having thermal stablity for hot & cold water supply, including all CPVC plain and brass threaded fittings, including fixing the pipe with clamps at 1.00M spacing. this in...

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipe...

Construction of brick masonry inspection chambers of internal dimension 600x600mm and depth 600mm(inner dimension) with modular bricks in CM 1:6, bed concrete 150mm thick with 1;3:6, platering 12mm t...

Construction of brick masonry inspection chambers of internal dimension 450x450mm and depth 600mm(inner dimension) with modular bricks in CM 1:6, bed concrete 150mm thick with 1;3:6, platering 12mm th...

Providing and fixing SFRC frame and cover conforming to IS 12592 (part-I)-1988 and IS 12592 (part-II)- 1991 with latest amendment, including cutting slabs to the required size for the opening and fixi...

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...

Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Materia...

Construction of sub-grade and earthen shoulders with approvedmaterial obtained from borrow pits with all lifts & leads, transporting to site, spreading, grading to required slope and compacted to meet...

Providing and laying of 1.5 mm thick SBS modified self adhesive single stick waterproofing membrane, with minimum elongation of 300% and puncture resistance of Greater than 200 N (as per ASTM E154), w...

Jelly Spreading (20-25 mm) : Supplying and providing jelly in the station yard of uniform thickness of 25mm including the cost of materials, labour charges, required tools and plants etc., complete. W...

Providing and applying primer coat with SS1 grade Bitume Emulsion on prepared surface of granular base includin cleaning of road surface and spraying primer at the rate of 0.70 kg/m2 using mechanical ...

Providing and applying tack coat with RS1 Bituminous Emulsionusing emulsion pressure distributor at the rate of 0.20 kg/m2 on the prepared bituminous surface cleaned with mechanical broom.

Providing and laying Bituminous Macadam with 100 tph capacity hot mix plant batch type using crushed aggregates of specified grading premixed with bituminous binder VG-30 @ 3.3% by weight of mix, tran...

Providing and laying Bituminous Concrete with 100 TPH capacity hot mix plant batch type using crushed aggregates of specified grading, premixed with bituminous binder VG-30 @ 5.2 per cent of mix and f...

Providing and fixing double action hydraulic floor spring of approved brand manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door we...

Providing and Fixing 15 mm thick densified tegular edged eco friendly light weight calcium silicate false ceiling tiles of approved texture of size 595 x 595 mm in true horizontal level, suspended on ...

Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE (Thermo Plastic Elasto...

Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead fr...

Providing and fixing factory made uPVC glazed/wire mesh windows/ doors comprising of lead free uPVC multi-chambered frame, sash and mullion/coupler (where ever required) extruded profiles having minim...

Filling the gap in between aluminium/ stone/ wood frame and adjacent RCC/Brick/ Stone/ wood/ Ceramic/ Gypsum work by providing weather/structural non sag elastomeric PU sealant over backer rod of appr...

Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on spec...

Providing and fixing ball bearing for rolling shutters including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge.

Extra for providing Manually operated Bevel Gear Box for operating rolling shutters including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions...

Extra for providing 2 HP Mild Steel Auto Reverse Shutter Gear box for operating rolling shutters including cost of materials, labour, usage charges of machinery complete as per specifications and as p...

Supplying, fixing acoustic lining on walls of AHU rooms with 50mm thick, density 32 kg/cum resin bonded glass fiber insulation friction fixed in 610mm x 610mm frame work made of 25x50x50x50x25mm made ...

Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 m...

Providing and laying 52 mm thick cement concrete flooring with concrete hardener topping, under layer 40 mm thick cement concrete 1:2:4 (1 cement: 2 coarse sand : 4 graded stone aggregate 20 mm nomina...

Providing and laying 5mm thick Self levelling Epoxy Flooring for Residential, Commercial, Sports & Industrial purpose made of reputed brand applied at 1L/m2 on existing Concrete substrate of 25Mpa or ...

Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitt...

Providing and fixing of wall cladding using 20mm thick gang saw water cut Shiva gold granite, grey granite in CM 1:3 (1 cement : 3 coarse sand) proportion cut to required shape, pattern with paper joi...

Providing and fixing Heat Resistant Terrace Tiles (300 mm x 300 mm x 20 mm) with SRI (solar refractive index) greater than 78, solar reflection greater than 0.70 and initial emittance greater than 0.7...

Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed t...

Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thick ness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, ...

Providing and fixing 10 mm thick acid and/or alkali resistant tiles of approved make and colour using acid and/or alkali resisting mortar bedding for Bathrooms: Toilet: Chemically exposed areas and jo...

Providing and fixing 10 mm thick acid and/or alkali resistant tiles of approved make and colour using acid and/or alkali resisting mortar bedding for Bathrooms: Toilet: Chemically exposed areas and jo...

Providing and fixing chromium plated brass handles of 100/125 mm with necessary screws etc. complete.

Providing and fixing bright finished brass butt hinges with necessaryscrews etc. complete. 125x85x5.5mm (Heavy type) :

Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete.

supplying and fixing hold fasts Hold fasts.

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the w...

Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard ...

Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing. Rectangula...

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. 32 mm dia,

Providing and fixing 100 mm sand cast Iron grating for gully trap.

Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour 600 mm long towel rail with t...

Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge.

Providing and fixing vitreous china dual purpose closet suitable for use as squatting pan or European type water closet (Anglo Indian W.C pan) with seat & lid fixed with C.P. brass hinges and rubber b...

Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually co...

Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings.

Bottle trap 31mm single piece moulded with height of 270 mm, effective length of tail pipe 260 mm from the centre of the waste coupling, 77 mm breadth with 25 mm minimum water seal, weighing not less ...

Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end) : 32 mm nominal bore.

Providing and fixing C.P. brass bib cock of approved quality conforming to IS:893.

Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross- section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminate shall be...

Providing and fixing to existing door frames Glass Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsatura...

Providing and fixing false flooring as per KPTCL specfication including cost of structural steel, false flooring materials, labour charges, etc., complete as per direction of engineer in charge of wor...

Providing and fixing modular multi dia meter cable sealing system which is water proof, fire proof and rodent proof consisting of frames, blocks and accessories to be installed where ever the electri...

Double Leaf doorset - Insulated Fire rated doorset (FD 120) - Staircase / exit pathway application / Refuge area. Providing and fixing of ISI marked fire doors as per IS 3614:2021, 120 minutes fire ra...

Design, fabrication, supply, erection, testing and commissioning of 5 Tonne capacity EOT crane consisting of double girder box type construction, rail mounted end carraiges with long and cros...

Supply, Installation, Testing and commissioning of factory built floor mounted chilled water double skin type horizontal/vertical air handling units made of 25mm thick panels consisting of pre plasti...

Supply, installation, testing and commissioning of Motorized (ON-OFF Type) duct mounted GI volume control damper with enthalpy sensor and necessary control wire (minimum 1.5 sqmm) for integration with...

Supplying & fixing of powder coated extruded aluminium Supply Air Grills with aluminium volume control dampers as per specifications.

Supply, installation, balancing and commissioning of factory fabricated GSS sheet metal rectangular/round ducting complete with neoprene rubber gaskets, elbows, splitter dampers, vanes, hangers, suppo...

Supply, installation, balancing and commissioning of factory fabricated GSS sheet metal rectangular/round ducting complete with neoprene rubber gaskets, elbows, splitter dampers, vanes, hangers, suppo...

Supply, installation, testing and commissioning of GI volume control duct damper complete with neoprene rubber gaskets, nuts, bolts, screws linkages, flanges etc, as per specifications.

Supplying, Fixing,testing and commissioning of fire dampers in supply air duct/main branch and return air path as and where required of required sizes i/c control wiring,the damper shall be motorized ...

Design, supplying, erecting testing and commissioning of-Passenger /Bed-cum-passenger hospital lift with speed of 1mtr per second ,variable voltagevariable frequency drive, with r without machine room...

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS: 12701 marked, with cover and suitable locking arrangment and making necessary holes for inlet, outlet and ov...

Supplying and installing following size of perforated hot dipped galvanised iron cable tray (galvanisation thickness not less than 50 microns) with perforation not more than 17.5%, in convenient secti...

Supplying heavy gauge PVC conduit pipe ……mm dia ....... mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes, adhesive paste etc., and running before concreting the sl...

Supplying heavy gauge PVC conduit pipe ……mm dia ....... mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes, adhesive paste etc., and running before concreting the sl...

Supplying heavy gauge PVC Conduit Pipe ….dia .......mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks and ...

Supplying heavy gauge PVC Conduit Pipe ….dia .......mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks and ...

Supplying and fixing sheet metal box made out of 18 SWG sheet metal with necessary holes for cable/conduit entry as required with one coat of primer of approved make etc. 100x75x65mm

Supplying and fixing sheet metal box made out of 18 SWG sheet metal with necessary holes for cable/conduit entry as required with one coat of primer of approved make etc. 135x75x65mm

Supplying PVC/GI flexible conduit pipe…mm dia fixing on surface over inverted tapered wooden plugs or phill plugs or rawl plugs and clamped using heavy gauge saddles at an interval of 300mm using NF...

Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire...

Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire...

Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire...

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...

Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/ Stone/ C.C wall...

Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/ Stone/ C.C wall...

Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/ Stone/ C.C wall...

Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone / C.C wall...

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.6A One Way Switch

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.6A Two Way Switch

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.6A Three Way socket

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.Stepped Fan Regulator Two Module

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 32A DP Switch.

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 12933 6/16A Universal Socket.

Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws,bolts, nuts, necessary phase separators, handle and wiring complete. Protection of Ov...

Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capa...

Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capa...

Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capa...

Supplying, fixing and wiring Earth Leakage Miniature Circuit Breaker (ELMCB) 240/450V upto 300mA sensitivity on existing wood/panel board.16-25 A 2 pole

Supplying, fixing and wiring earth leakage relay with corebalanced current transformer suitable for single phase 50 Hz AC with latest microcontroller based, digital readout of percentage leakage curr...

Supplying, fixing and wiring 3 Phase Digital Ammeter / Voltmeter

Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 230/440VAC. 50 Hz 12/24V D.C.

Supplying exhaust fan of 1440 RPM of 300 mm (12") size with bracket blades complete for light duty suitable to operate on 230V 50Hz, AC Supply.

Supplying of 1440rpm heavy duty exhaust fan with bracket blades suitable to operate on 230V 50Hz, AC Supply complete.15" Sweep (450 mm)

Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc, for operation on 230 V, 50 cycles. Single phase AC supply conforming to ISS-374- 1979 and with double ball be...

Supplying wall mounting fan suitable to operate at singlephase 230v AC. supply.400 mm Sweep

Supplying of .. TR Invertor type split Air conditioners suitable for operation on A/C supply single phase 50 Hz 230 V with hermetically sealed inverter compressor with air cooled condenser, latest R41...

Installation charges for split type air conditioner with allied works for one indoor and one outdoor unit is to be mounted on suitable Angle Iron support upto 3.0 Ton split/cassette type A/C.

Supplying and installation of insulated refrigerant copper tubing of 5/8" and 3/8" with polythene foam insulation 3 core 80 stand copper wiring between indoor and outdoor unit Leak testing oil and gas...

Extra for Fabrication supply and fixing of Stand fabricated using slotted angle /L angle of size 6mm x 50mm for mounting out door/indoor A.C. unit/ Batteries.

Supplying of .....feet -PVC Batten with integrated LED tube ....W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI greater than 80. Power Input: 220-240V@ ...

Supplying of recess mounting non integral type ........ LED w luminaire comprising of pressure decast/extruded aluminium housing, with spring loaded false ceiling clamps, Power LEDs with CCT 6500 degr...

Supplying of recess mounting non integral type ........ LED w luminaire comprising of pressure decast/extruded aluminium housing, with spring loaded false ceiling clamps, Power LEDs with CCT 6500 degr...

Supplying of recess mounting non integral type ........ LED w luminaire comprising of pressure decast/extruded aluminium housing, with spring loaded false ceiling clamps, Power LEDs with CCT 6500 degr...

INDUSTRIAL HIGHBAY LUMINAIRE ( INTEGRAL TYPE) Industrial medium/high bay luminaire with integral type Control gear, copper wound ballast, visor glass assembly and including supply of lamps. 100W, 240...

Supplying and fixing of LED Bulkhead of 10W with IP65 protection and IK08 impact resistance suitable for surface and wall mounting applications.

Supply and fixing Battery operated portable fluoresent lamps

Fixing all types and all capacities of fluorescent /false ceiling / spot light / CFL / LED fittings indoor on the wall/ ceiling / rafters / girders using 23/0.0076" twin twisted PVC insulated wires, r...

Fixing a ceiling / Wall mounting fan of all capacities and all types to the existing 'S'' hook with fan regulator to the existing board together with supplying and fixing 5 A. ceiling rose, necessary ...

Extra length of GI pipe of class B 19mm dia for down rod.

Fixing one exhaust fan after making a suitable notch in the wall and finishing with cement mortar and colouring to match the existing wall or brackets, with bolts and nuts and a 5 A, ceiling rose with...

Supplying, erecting, testing and commissioning of voltage stabilizer suitable for 170 to 270 v input and load variation from no load to full load, with over load protection, spike suppression, operati...

Earthing : Supplying and fixing and wiring earth electrode for grounding circuits IC cutouts and other equipments on the meter board in the pit. The pits should be filled up with equal proportion of s...