Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹20.8 LAccepted-AOC 7 MULLAI NAGAR MAIN ROAD WEST TAMBARAM CHENNAI 600045 | CHENGALPATTU | TAMIL NADU | 600045 | L1 | Accepted-AOC Being lowest | |
| 2 | L2₹23.1 L+₹2.4 L (11.4%)Rejected-Finance | L2 | Rejected-Finance Not Being lowest | |
| 3 | L3₹23.5 L+₹2.7 L (13.2%)Rejected-Finance | L3 | Rejected-Finance Not Being lowest |
Tender Value
₹30 L
EMD Value
₹60,000
Closing Date
25 Jul 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GARRISON ENGINEER
GARRISON ENGINEER (AF) AIR FORCE STATION TAMBARAM, CHENNAI - 600 046
REPAIRS TO WALL PLASTER, CHAJJA AND PERIODICAL WORKS TO CERTAIN BUILDINGS AT OMQ, TECHNICAL AREA AT MAIN CAMP AT AF STATION TAMBARAM
2023_MES_605928_1
GE(AF)/TBM/8639/E8
Open Tender
Civil Works
Item Rate
270 days
AIRFORCE STATION TAMBARAM
Please refer Tender documents.
7 documents required · 7 mandatory
₹500
GE AF TAMBARAM
₹60,000
Yes
22 Aug 2023
27 Jun 2023
27 Jul 2023
27 Jun 2023
25 Jul 2023
13 Jul 2023
28 Jun 2023 - 4 Jul 2023
Amount
Material and labour for Preparation of old decorated surfaces (plastered/ unplastered) of walls/pillars /cornices by removing / scraping down all loose particle, smoke soot, moulds, moss & efflorescent salts, oil & greasy spots etc with using broom / steel patti / wire brush / sand papering or by any other mean including applying white cement based putty where required for filling to depressions/nail holes/light cracks etc and to make the surface even and smooth ,upto entire satisfaction of Engineer-in-charge and after preparing the surface smooth applying one coat of white wash with using paint brush complete all as specified and as directed
Material and labour for Preparation of old decorated surfaces (plastered/ unplastered) of ceiling by removing / scraping down all loose particle, smoke soot, moulds, moss & efflorescent salts, oil & greasy spots etc with using broom / steel patti / wire brush / sand papering or by any other mean including applying white cement based putty where required for filling to depressions/nail holes/light cracks etc and to make the surface even and smooth, upto upto entire satisfaction of Engineer-in-charge and after preparing the surface smooth applying one coat of white wash with paint brush complete all as specified and as directed
Material and labour for preparation of old decorated surfaces (plastered /unplastered) of walls /pillars /cornices by removing / scraping down all loose particle, smoke soot, moulds, moss & efflorescent salts, oil & greasy spots etc with using broom / steel patti / wire brush / sand papering or by any other mean, including applying white cement based putty where required for filling to depressions/nail holes/light cracks etc and to make the surface even and smooth ,upto entire satisfaction of Engr-in-charge, and after preparing the surface smooth applying one coat of oil bound distemper (washable) by using electric paint roller or roller brush, as per existing or as approved tint/colour complete all as specified and as directed
Material and labour for preparation of old decorated surfaces (plastered/ unplastered) of ceiling by removing / scraping down all loose particle, smoke soot, moulds, moss & efflorescent salts, oil & greasy spots etc with using broom / steel patti / wire brush / sand papering or by any other mean, including applying white cement based putty where required for filling to depressions/nail holes/light cracks etc and to make the surface even and smooth, upto entire satisfaction of Engineer-in-charge, and after preparing the surface smooth applying one coat of oil bound distemper (washable) by using electric paint roller or roller brush, as per existing or as approved tint/colour complete all as specified and as directed.
Material and labour for preparation of old decorated surfaces (plastered/ unplastered) of walls/pillars /cornices by removing / scraping down all loose particle, smoke soot, moulds, moss & efflorescent salts, oil & greasy spots etc with using broom / steel patti / wire brush / sand papering or by any other mean, washing down with water including applying white cement based putty where required for filling to depressions/nail holes/light cracks etc and to make surface even and smooth, upto entire satisfaction of Engineer-in-charge, and after preparing the surface smooth applying one coat of cement base paint with paint brush or roller brush, as per existing or as approved tint/colour complete all as specified and as directed
Material and labour for complete removal of existing treatment (any layers of existing treatment ) from walls/pillars/cornices by scraping down with using steel patti , upto entire satisfaction of Engineer-in-charge, brooming and washing down with water including applying white cement based putty where required for filling to depressions to make the surface even and , upto entire satisfaction of Engineer-in-charge, and after that applying two coats of cement base paint as per approved tint/colour with using paint brush/roller brush, complete all as specified and as directed. NOTE : - Complete removal /scraping to old existing treatment as directed by Engineer-in-charge, each stage i.e after complete removal and before applying CBP as specified above, the surface shall be passed in writing by the Engineer-in-charge in site order book.
Material and labour for complete removal of existing treatment (any layers of existing treatment ) from walls/pillars/cornices by scraping down with using steel patti wire/ brush / sand papering , upto entire satisfaction of Engineer-in-charge, remove / scraping down all loose particle, smoke soot, moulds, moss & efflorescent salts etc brooming all dust and preparing the surfaces smooth by applying chalk whitening, preparatory to distempering and after applying two coats of oil bound distemper (washable) over a coat of birla care putty as per approved tint/colour by using electric paint roller or roller brush complete all as specified and as directed . NOTE : - Each stage i.e after complete removal and before applying OBD as specified above, the surface shall be passed in writing by the Enigineer-in-charge.
M&L for complete removal of old decorated surfaces of walls, pilasters including cornices of Over Head Reservoir of any staging and brooming down with steel wire brushing, scrapping down smoke soot, module, moss and efflorescent salts, trading oil/ greasy spots etc., and applying two coats of cement based paint including necessary scaffolding etc complete all as specified and as directed
M&L for preparation of old decorated surfaces of wood work exc 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.
M&L for preparation of old decorated surfaces of wood work not exc 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.
M&L for preparation of old decorated steel surfaces exc 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.
M&L for preparation of old decorated steel surfaces not exc 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.
M&L for preparation of old decorated surfaces of wood work of any description and applying one coat of varnishing complete all as specified and directed
M&L for obliterating old writings and re-writing of letters or figures of high 10 cm (Block Roman, Italic or Indian) with one coat of thick/ dark shaded paint all as specified and directed.
Material and labour for preparation of plastered/unplastered surfaces smooth and to make good depression by applying average 3mm thick layer (1.5mm thick in each in two layer application) of white cement based putty (wall care putty make Birla, JK or equivalent as approved by Engineer-in-charge) and sanding the surfaces, to make the surface even and smooth upto entire satisfaction of Engineer-in-Charge to receive surface finish of any type of treatment complete all as specified and as directed
Material and labour for preparation of old painted concrete surfaces of any description not otherwise described over 10cm width or girth & applying one coat of synthetic enamel paint (1st quality) of approved tint/colour to achieve glossing finish with using paint brush complete as specified and as directed
Taking down old cement plaster including racking out joint hacking for keys and scrubbing down with water etc., on wall/ ceiling surfaces and removing the debris from the defence premises complete all as specified and directed.
M&L for rendering 15mm thick on brick/ concrete surfaces with CM 1:6, finished even and smooth without using extra cement complete all as specified and directed.
M&L for rendering 5mm thick on ceiling surfaces with CM 1:3, finished even and smooth without using extra cement all as specified and directed.
Material and labour for preparation of new plastered surfaces of walls/pillars /cornices by brooming down with using broom/sand papering or by any other mean, washing down with water and applying two coats of cement base paint as per approved tint/colour with using paint brush/roller brush complete all as specified and as directed by Engineer-in-Charge.
Material and labour for preparation of new plastered surfaces of walls/pillars /cornices by brooming down with using broom/sand papering or by any other means, preparing the surfaces smooth by applying one coat of chalk whitening as priming coat and after that applying two coats of oil bound distemper (washable) as per approved tint/colour with using electric paint roller or roller brush complete all as specified and as directed
Material and labour for preparation of new plastered surfaces of ceiling by sand papering or by any other means, preparing the surfaces smooth and after that applying three coats of lime white wash with using paint brush complete all as specified and as directed
Material and labour for preparation of old surfaces (plastered/unplastered) of walls/pillars /cornices by brooming down or steel wire brushing, scraping down smoke soot, moulds, moss & efflorescent salts, oil & greasy spots etc including applying white cement based putty where required for filling to depressions to make the surface even and smooth , upto entire satisfaction of Engineer-in-charge, after preparing the surfaces applying one coat of weather proof exterior emulsion paint (wheather coat Apex, 100% exterior grade), as per existing or as approved tint/colour complete all as specified and as directed
Material and labour for preparation of old painted (plastered/unplastered/ concrete) surfaces of any description over 10cm girth or width, not otherwise described of walls/pillars /cornices by removing / scraping down all smoke soot, moulds, moss & efflorescent salts, oil & greasy spots etc with using broom / steel patti / wire brush / sand papering or by any other mean as required, upto entire satisfaction of Engineer-in-charge after preparing the surfaces applying two coats of plastic emulsion paint, interior emulsion incl one coat of birla care putty (finishing smooth and glossy upto entire satisfaction of Engineer-in-charge) as per approved tint/colour with using paint brush/roller brush complete all as specified and as directed
M & L for complete removal of existing treatment by scrapping,Washing, rubbing down and stopping of distempered/any painted surfaces complete all as specified and as directed
Applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces and Providing and applying plaster of paris putty of 1 mm thickness over plastered surface to prepare the surface even and smooth all as specified and directed.
SINI PROMPT
vrk constructions
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .