COMPREHENSIVE REPAIR/MAINT OF LT SUPPLY SYSTEM, LT PANEL, CABLE, JUNCTION BOXES AND CONNECTED WORKS AT DIFFERENT MD ACCN AREA AND UNITS AREA AT BABINA CANTT UNDER GE BABINA

Amount

M&L for earthing complete with galvanised steel earth plate electrode of size 600X600X6 mm thick buried directly in ground (earth pit not less than 2.25 m deep below normal ground level) with top edge of the plate not less than 1.50 mtr below the ground level connected to galvanised iron strip of 32 x 6 mm as earth lead by means of bolts nuts check nuts & washers of galvanised iron or steel ,surrounded by charcoal of coke and salt, protected by GI pipe 40 mm bore (light grade), water pipe 20mm bore GI medium grade with funnel and wire mesh,and making chamber of PCC (1:4:8) type D-2 using 40 mm graded stone aggregate and coping shall be in PCC(1:3:6) type C-1 using 20 mm graded stone aggregate, 50 mm thick cover of RCC (1:2:4) type B-1 using 20 mm graded stone aggregate, reinforced with 8 mm dia TMT bars @ 80 mm c/c boath ways including excavation and earth work and removal of surplus soil to distance n exc 50 m complete all shown in electrical plate No 3 of SSR part- 2010 complete all as specified and directed. Note :-(i) The cost of GI earth lead & G I pipe of 7.50 mtr length for protection of GI wire and excavation work for pit shall deemed to be included in this item. (ii) Earthing test will be carried out and if desired result not achieved and the earthing will be redone to achieve desired result without any extra payment.(iii) Charcoal dust and common salt upto 1.5 meter depth shall be filled in layers of 15 centimeters all around the earth plate.

M&L for brick work with fly ash bricks, straight or curved on plan exc 6 m mean radius built in CM (1:4) as in foundation of equipment,supporting piller for cable/pipe, platform, ramp, cable duct, protecting wall incl demolistion of existing brick work built in cement mortar complete all as specified and directed.

M&L for 15 mm thick rendering in cement plaster 1:4 on fair faces of brick work or concrete surface/ in cable duct complete all as specified and directed.

Restretching of existing ACSR’s conductors and earth wires including cradles, of each span consists upto 5 conductor of any description, size & shape and in any position approx length 30 to 45 mtr as in overhead lines any type, on existing poles, including opening of connections and binding wires, restringing and tightening of conductors/earth wire in position, removing sag, binding to insulators with new aluminum wire, making and connecting jumper connections etc incl commissioning and testing complete all as specified and directed. The quoted rates shall be deemed to include the following provisions also :- (i) Setting/adjusting etc in position of cradles. (ii) Adjusting & tightening of stay assembly wherever required. (iii) Trimming/cutting of all trees branches upto 3M distance from nearest conductor/earth wire as directed at site.(iv) Adjusting & tightening of cross arm,bracing,clamps, nut bolt wherever required (v) Old spacers of ACSR conductor shall be reused and fixed as directed.

M&L in repair/replacement composite type LT separators/spacers , made with poly propelene single mould capable for 3 phase 415 volt on LT ACSR overhead distribution system of grey/white colour including fly nuts made with Engineering grade nylon, studs shall be properly fixed, spacers having minimum width 25 mm & thickness 12 mm, voltage flactuation 12% permissible under IES rules. Note:- The contractor has also provide a written guarenee for replacement of minimum 2 years over the products.

Supplying, laying, jointing & commissioning of cable XLPE insulated screened PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) with stranded aluminum conductor, 11000 volts grade, (Earthed) cross sectional area 95 sqmm 3 core as per IS 7098 Pt-II complete all as specified. Make :- KEI/Havells/Universal cables/polycab

S&F of cable jointing Kit 11 KV (earthed) grade cable for outdoor termination heat shrink type joint complete with jointing material and accessories suitable for 3 core XLPE armoured Aluminium conductor cable of size 95 sqmm complete all as specified and as directed.

M&L for earthing complete including necessary excavation and earth work in any type of soil with galvanized steel earth plate electrode size 60 cm x 60 cm x 6 mm thick buried directly in ground (earth pit not less than 2.25 mtrs below ground level) with top edge of the earth plate not less than 1.5 mtr below normal ground level connected to galvanised earth lead 4.0 mm dia by means of bolts nuts check nuts and washers of galvanised iron or steel all as shown in electrical plate No.5 of MES SSR Part-1 connected to main switch board or main control board all as specified and testing on completion including provision of earth wire protected by galvanised iron 40 mm dia. light grade pipe and watering pipe shall be 20 mm ore medium grade PCC pit with pre cast RCC cover, charcoal/salt funnel etc. complete all as directed. Note : The conctrete pit shall be PCC 1:3:6 type C1, 40 mm thick PCC slab of RCC (1:2:4) type B-1 using 20 mm graded stone aggregate reinforced with 8 mm TMT bars on both sides with suitable cast iron handle shall be provided in lieu of cast iron cover shown in electrical plate No.5 of MES SSR Part-1 (ii) PCC pits shall be provided atleast 500 mm away from the pit and not on the earth pit itself and the extra cost of additional length of watering pipe, bends, elbows etc shall be deemed to included in the quoted rate.

S&F in replacement kiosk box for luminaires ,weather proof made out of HDPE/FRP housing fire retardant, non fusing, shock & rust proof, single piece moulded and cover with hinged door, pole mounting type comprising of four pole copper connectors of 16 Amps capacitywith 6 Amp MCB single pole , of minimum size 300x200x125mm, fixed on pole with MS, clamps 30 x 5mm with necessary nuts, washer and incl applying two coats of synthetic enamel paint over a red oxide primer on steel surface/clamps and embossing/painting of Danger sign of size not less than 10cms x 7.5cms with letter and conventional skull and bones in single red color on front face of kiosk box complete all as directed. The quoted rate also includes cost for material & repalcement of 4 sqmm multistranded twincore aluminium cable ISI marked from overhead conductor to junction box and replacement of 3 core copper cable of 1.5 Sqmm ISI marked from junction box to security light length as per required at site. Make- Syntex/Supreme/Hensal

S & F in replacement of GI brackets for fixing LED street light fitting fabricated out of GI tubing 40 mm dia, medium grade, 1.2 mtr long , bend to 120 degree shape by cutting, welding and well finishing including MS clamp of flat iron of size 32 x 4 mm -02 Nos complete for steel poles / PCC pole as per site requirement with nut, bolt & washers for fixing of GI bracket complete all as specified and directed.

Supply, erecting and fixing in replacement in true vertical position, prestressed concrete pole 9.0 mtr long 102 mm x 172 mm at top and 152 mmx 279 mm at bottom class 10 (Numbering of the poles shall be done with synthetic enameled painted letter of shape & size as directed by Engineer-in-Charge) including taking down of old unserviceble pole & shifting of cross arms ACR conductor , GI wire, insulator, street light brackets etc complete all as directed. Note :- Excavation incl earth work and PCC foundation will be measured and paid separately. The old unserviceable pole obtained from dismanting shall be remove by the contractor from cantt area/MOD. If the contractor has not removed the dismantled item a penality of Rs.500.00 per pole will be charged from the contractor as a penality. Make : Hindustan Pressed concrete Faridabad / M/s Indian PCC poles / M/s Concrete Ugyog Jhansi.

M&L for replacement of new generation energy saving and environmental friendly long life LED street light made up of innovative die cast aluminium housing high power LED as lighting source with IP - 66 power consumption 45 watt complete input voltage of 150-240 Volt (nominal rated voltage 240 Volt) complete including taking down of old unserviceable street light any type/any capacity including replacement of twisted 3 core copper cable of size 1.5 Sqmm dia for connecting phase, neutral and earth from junction box to LED light through copper connectos all as specified and directed. Make Bajaj Cat part No BRTFG45 LED WW or equivalent in Havells/Philips/Crompton

Description all as per item No 15 above but of capacity 70/72 Watt and ditto- . Make Bajaj Cat part No BRTFG72 LED I or equivalent in Havells/Philips/Crompton

Description all as per item No 15 above but of capacity 90 Watt and ditto- . Make Bajaj Cat part No BRTFG90 LED I V2 or equivalent in Havells/Philips/Crompton

M&L in replacement of new generation energy saving and environmental friendly long life LED flood light made up of innovative die cast aluminium housing high power LED as lighting source with IP - 66 power consumption 100 watt colour white complete input voltage of 150-240 Volt (nominal rated voltage 240 Volt) complete including taking down of old unserviceable flood light any type/any capacity including replacement of twisted 3 core copper cable of size 2.5 Sqmm dia for connecting phase, neutral and earth from junction box to light through connectors all as specified and directed.(Make :- Bajaj Cat part No BJFL100 LED I /Havells/Philips)

Description all as per item No 18 above but of capacity 50 watt

S&F for replacement & testing commissioning of outdoor type bus bar panel CPRI approved weather proof MS cubical panel board made of 3 mm CRCA MS sheet outdoor type of size 110 cm x 80 cm x 40 cm, 4 Nos of aluminium bus bar of 300 Amp capacity with MCCB 4 pole of Capacity 200 Amp 25 KA (Ics =Icu=100%) including one coat of redoxide and two coat of enamel paint powder coated, mounted on mounted on angular frame work of 50x50x5mm thick angle iron base frame, minimum 60 cm hight and fixed with PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) in foundation for fixing panels, powder coated finish over one coat of red oxide primer outside and two coats of red oxide primer on inside and PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) in foundation for fixing panels & aluminium busbar chanel insulated with colour coated heat shrinkable sleaves and mounted on DMC/Epoxy insulator all as specified & directed.Make - Maclayers/shalabh/Universal

M&L for stay assembly of MS galvanised stay plate 230mm X 230mm X 6mm thick MS galvanised tay rod 20 mm dia with nut 100 cm long MS galvanised stay bow 40 cm long and 14 mm dia with 2 Nos galvanised thimble with and incl all fittings all as specified in SSR 2009 Part I icomplete all as specified and directed. Note - Excation, earth work, PCC foundation etc, loop type insulator shall be measured and paid separately.

M&L for galvanised stay strand 7/ 4 mm complete all as specified and directed.

M & L for loop type insulator large size with overall demensions 140 mm clearance of hole 25.5 mm complete all as specified and as directed.

Excavation in trenches n. exc 1.5 mtr wide and n. exc 1.5 mtr depth for pole / cable / foundation etc including getting out in soft /loose soil complete all as specified and directed.

Excavation in trenches in any type of soil not exc 1.5 mtrs wide and exc 1.5 mtr in depth for laying of pipe/ cables/ poles etc and getting out complete all as specified and as directed.

Returning, filling in, approved earth including spreading, levelling, watering and well ramming in layers n.exc 25 Cm thick after cable are laid and tested complete all as specified and directed.

Removing excavated material / surplus soil to a distance not exc. 50 mtrs & deposited where directed at a level not exc.1.5 mtr above the ground level complete all as specified & directed.

M&L for fine and clean dry sand (river sand) free from sharp materials laid in trenches for cushioning of cable 8 cm thick under cable and 15 cm thick over the cable including gently punning complete all as specified and directed. Note:- The thickness of sand shall be measured 18 cm after punning.

M&L for PCC cable cover class LV type 1 flat size 250 mm x 150 mm x 40 mm, ISI marked across the cable for protection of cable after sand cushioning complete all as specified & directed. Make: M/S MEHATAB TILES, Rani Shopping Centre, Bhanwar, Indore,(B) M/S NAVYA TILES, 68, NEHRU PARK, SARDARPUR,JODHPUR- 342003 Ph. 0291-2650094, 2627963(C) SAP PAVERS JODHPUR (D) SAGAR TILES SAHARANPUR (E) Star Tiles & Industries, Rama Devi, Kanpur

M&L for PCC cable cover class HV type 1 flat size 300 mm x 180 mm x 40 mm, ISI marked across the cable for protection of cable after sand cushioning complete all as specified & directed. Make: M/S MEHATAB TILES, Rani Shopping Centre, Bhanwar, Indore,(B) M/S NAVYA TILES, 68, NEHRU PARK, SARDARPUR,JODHPUR- 342003 Ph. 0291-2650094, 2627963(C) SAP PAVERS JODHPUR (D) SAGAR TILES SAHARANPUR (E) Star Tiles & Industries, Rama Devi, Kanpur

M&L for demolition of PCC floor any description for laying UG cable/pipe line and making good the disturbed area to match with the existing surface with cement concrete 1:3:6 type C-1 using 20 mm graded stone aggregate including removing the excavated/demolished materialsn to a distance n exc 50 mtr and deposting where directed etc complete all as specified.

M&L for PCC 1:2:4 type B-1 (using 20mm graded stone aggregates) as in coping for pole including providing necessary form work to shape as directed for poles all as specified and directed .

M&L for PCC 1:4:8 type D-2 (using 40mm graded stone aggregates) as in foundation filling and mass concrete for poles all as specified and directed.

M&L for PCC 1:3:6 type C-2 (using 40mm graded stone aggregates) as in foundation filling and mass concrete including form work for poles/ mass concrete all as specified and directed .

Supply,laying and testing in repair/replacement of cable XLPE insulated,screened,PVC bedded galvanized steel strip or wire armoured electric power cable (heavy duty) 1100 V grade with multi stranded aluminium conductor of size 400 sqmm single core as per IS 7092 Pt-I complete all as specified and as directed. Make :- M/s KEI INDUSTRIES/HAVELLS INDIA LTD/PLAZA CABLES/POLYCAB/CCI/RPG CABLE/ASIAN CABLE/INCAB/FINOLEX /KONARK(M/S POWER CABLE IND)

Supply,laying and testing in repair/replacement of cable XLPE insulated,screened,PVC bedded galvanized steel strip or wire armoured electric power cable (heavy duty) 1100 V grade with multi stranded aluminium conductor of size 300 sqmm single core as per IS 7092 Pt-I complete all as specified and as directed. Make :- M/s KEI INDUSTRIES/HAVELLS INDIA LTD/PLAZA CABLES/POLYCAB/CCI/RPG CABLE/ASIAN CABLE/INCAB/FINOLEX /KONARK(M/S POWER CABLE IND)

M&L for aluminium conductor, steel reinforced (ACSR) of any size/description on HT/LT poles/lines including stringing, tightening, binding to insulators with aluminium wire making and connecting jumpers, connections etc including connecting, commissioning and testing incl taking down complete all as specified & directed. Note- Old spacers obtained from taking down of ACSR conductor shall be reused and fixed as directed. Make : ALL IND/ICC/KONARK( M/S POWER CABLE INDIA /UJALA/ INDIAN ALUMINIUM CO

S & F in replacement of shackle type 75 mm height and 90 mm dia insulator, porcelain, vitreous, white, brown or green incl galvanised mild steel strap 31 mm X 3 mm, insulator bolts 12 mm dia with suitable washers and nut, suitable for working pressure upto 1100 volt & including taking down complete all as specified and directed. Make : BHEL/JAYSHREE/AREVA/ABB/PACTIL/SOUTHERN INSULATOR/MADRASS PLCELAIN

S & F in replacement of pin type porcelain, vitreous, white, brown or green insulators, including one galvanized mild steel spindle two galvanised iron washers and one galvanised iron nut,1100 volt grade 100 mm height and 65 mm dia suitable for working pressure incl taking dwon complete all as specified and directed .Make : BHEL/JAYSHREE/AREVA/ABB/PACTIL/SOUTHERN INSULATOR/MADRASS PLCELAIN

Supply, erecting and fixing in true vertical position, steel tubular swaged pole (410 SP-31) 9.0 mtr long, complete with cast iron base plate, pole cap / finial taper plug, bolts, nuts and washers, welded reduced section and longitudinal weld throughout entire length of pole including 2 coats of black bituminous paint externally upto planting depth and remaining exterior portion of pole shall be provided with one coat of red oxide primer and two coats of aluminium paint incl taking down complete all as specified and directed. (Numbering of the poles shall be done with synthetic enameled painted letter of shape & size as directed.) Note :- Excavation incl earth work and PCC foundation will be measured and paid separately. Make : (a) PS Steel Tubes Pvt Ltd (b) India Electrical Poles.(c) Surjit Steel Industries Mohali Punjab (d) National tubing Co. Kanpur(e) Fabrico Delhi road Meerut ( f) Quality steel Products Kanpur (g) Advance steel tubes Ltd Ghaziabad (h) RAMA steel tubes Ghaziabad

S&F in replacement of 1100 Volts grade heavy duty ISI marked cable PVC insulated stranded aluminium conductor one twin core cable flat or circular of size 16 sqmm served with inner sheathing of PVC tape & overall PVC sheathed in service connections , of following sizes. Make :- Havells/ Plaza cables/ polycab /Finolex

All as per item No. 41 here in before but one twin core cable flat or circular of size 10 sqmm

All as per item No. 41 here in before but one twin core cable flat or circular of size 6 sqmm

All as per item No. 41 here in before but one twin core cable flat or circular of size 4 sqmm

S & F in replacement of MCCB, 04 Pole, capacity 40 Amps with ultimate breaking capacity 16 KA at 415 volts with fixed thermalsettings conforming to IEC 60947 Part-I/IS-13947 Part-I , (Ics=Icu=100%) in the existing panel with suitable connecting copper terminals at site complete all specified and directed. Make :- LEGRAND/ABB/SIEMENS/ L&T/Havells/Indo Asian

Description all as per item No 45 here in above but of capacity 63 Amps with ultimate breaking capacity 16 KA Make :- LEGRAND/ABB/SIEMENS/ L&T/Havells/Indo Asian

Description all as per item No 45 here in above but of capacity 100 Amps with ultimate breaking capacity 25 KA Make :- LEGRAND/ABB/SIEMENS/ L&T/Havells/Indo Asian

Description all as per item No 45 here in above but of capacity 160 Amps with ultimate breaking capacity 25 KA Make :- LEGRAND/ABB/SIEMENS/ L&T/Havells/Indo Asian

Description all as per item No 45 here in above but of capacity 200 Amps with ultimate breaking capacity 25 KA Make :- LEGRAND/ABB/SIEMENS/ L&T/Havells/Indo Asian

Description all as per item No 45 here in above but of capacity 250 Amps with ultimate breaking capacity 25 KA Make :- LEGRAND/ABB/SIEMENS/ L&T/Havells/Indo Asian

Description all as per item No 45 here in above but of capacity 315 Amps with ultimate breaking capacity 35 KA Make :- LEGRAND/ABB/SIEMENS/ L&T/Havells/Indo Asian

Description all as per item No 45 here in above but of capacity 400 Amps with ultimate breaking capacity 35 KA Make :- LEGRAND/ABB/SIEMENS/ L&T/Havells/Indo Asian

Description all as per item No 45 here in above but of capacity 630 Amps with ultimate breaking capacity 50 KA Make :- LEGRAND/ABB/SIEMENS/ L&T/Havells/Indo Asian

M&L fo replacement of TPN HRC type rewireable switch fuse unit of 415 Volt 50 Hz three phase of capacity 32 Amp including MS box with backelite fuse & fuse carrier fittings , operating insulated handle, top cover necessary locking arrangemnts etc as per IS/IEC 60947 1&3 including necessary wall mounting fitting as directed including taking down the existing all as specified and directed. Make : INDOASIAN / L&T/Havells

Description all as per item No 54 above but of capacity TPN 63 Amp and ditto-

Description all as per item No 54 above but of capacity TPN 100 Amp and ditto-

Description all as per item No 54 above but of capacity TPN 200 Amp and ditto-

M&L for steel tubing galvanised, light grade complete with fittings laid in trenches/ fixed along with poles/walls & floor of buildings etc as protection to cables including demolition & taking down of the old existing and repair of the floor/wall with matching with the existing if required of size 80 mm dia bore complete all as specified and as directed. Make :- Tata /Jindal/Prakash/Surya

Description all as per item no 58 of above but of size 50 mm dia bore complete all as specified and as directed.

Description all as per item no 58 of above but of size 40 mm dia bore complete all as specified and as directed..

M & L for road cutting incl necessary excavation 45 cm wide and 90 cm in depth as in trenches in any type of soils/rock for laying HT/LT UG cable through pipe after laying /through the cable trenches will be filling top with M&L PCC 1:3:6 type C-1 using 20 mm grdaeds stone aggregates from top over 15 cm thick hard good of broken boulders , 63 mm gauge over 15 cm bolders 100 mm dia over filled and rammed earth to make good the disburbed surface etc complete all as specified and directed.

S & F cross arms, bracing, supports clamps and back plates fabricated from structural steel sections incl nuts & bolts, washers, welding bending cold or hot, drilling holes for bolts in any shape or size as directed and inclusive of one red oxide primer coat, one under coat and one finishing coat of synthetic enamel paint incl taking down existing complete all as specified and directed.

M&L for taking down and replacement of street light control switch as per coordinate of Babina cantt for automatic switching of street lights based on LUX level of natural light required illuminance for switching on is ‹ 30 Lux and for switching OFF › 10 Lux level. The sensor (nature switch) along with suitable power contactors input (supply) MCB and output (load) MCB(s), support terminals should be enclosed in pole/ wall mountable enclosure made of rust proof, electric shock proof , termite proof and FR graded SMC junction box conforming of IP 54 degree of ingress single phase 8KW lightning load capacity including mounting bracket , cable glands, front openable doors fitted with hinges & locking arrangment complete all as specified and directed. The contactor MCB and circuit wiring should suitable enough to take load of 8 KW equally distributed over three phase and street light timer should be comprising of following:- (a). Input MCB rating 63 Amps (b).Contactor MCB rating 63 Amps (c).Out put MCB rating 63 Amps (d).Three phase circuit wiring minimum 16 Sqmm multistranded copper wire. (e)Model No :- SWADEEP -02EC 8 KW1P. Make :- Kakatiya Energy Systems Ltd /equivalnt in Indoasian/Havells

M&L for painting of steel tubuler 11/9 mtr poles any type complete incl flat iron clamps, D clamps, Stay clamps, earth wire clamps, bracing, cross arm with two coat aluminium paint including prepration old painted surface initally & applying one coat of red oxide, applying two coat of aluminum paint over the red oxide, marking with alternate white and red strips 30 cm height 5 Nos strips with two coat of synthetic enamel paint and also including numbering of poles with white paint are located on different locations complete all as specified and directed by Engr-in-Charge.

M & L for painting of steel cross arm, bracing supports of 11/9 mtr PCC poles any type incl flat iron clamps, D clamps, stay clamps, earth wire clamps, bracing, cross arm with two coat aluminium paint incl prepration old painted surface and applying cemente based paint over cemented portion of PCC poles, marking with alternator white and red strips 30 cm height 5 Nos strips with two coat of synthetic enamel paint, numbering of poles complete all as specified and directed.

S&F in replacement of HRC fuse link & bases bolted type made up of copper bodyof breaking capacity 80 KA 500 V AC as per sample at site of rating 63 Amp to 100 Amp. The quoted rate includes replacement of thimbels and HRC fuses and necessary repair of SDFU and testing & commissioning on completion.

Description all as per item no 67 of above but rating 160 to 200 Amp

Supply,laying and testing in replacement of cable XLPE insulated,screened,PVC bedded galvanized steel strip or wire armoured electric power cable (heavy duty) 1100 V grade with stranded aluminium conductor of size 95 sqmm 3.5 core as per IS 7092 Pt-I complete all as specified and as directed. Make :- M/s KEI INDUSTRIES/HAVELLS INDIA LTD/PLAZA CABLES/POLYCAB

All as per item No 68 here in above but of size 70 sqmm 3.5 core and ditto-

All as per item No 68 here in above but of size 50 sqmm 3.5 core and ditto-

All as per item No 68 here in above but of size 35 sqmm 3.5 core and ditto-

All as per item No 68 here in above but of size 25 sqmm 4 core and ditto-

All as per item No 68 here in above but of size 16 sqmm 4 core and ditto-

All as per item No 68 here in above but of size 10 sqmm 4 core and ditto-

All as per item No 68 here in above but of size 10 sqmm 2 core and ditto

Supply, erecting and fixing in replacement of true vertical position, steel tubular swaged pole (410 SP-31) 11 mtr long, complete with cast iron base plate, pole cap / finial taper plug, bolts, nuts and washers, welded reduced section and longitudinal weld throughout entire length of pole including 2 coats of black bituminous paint externally upto planting depth and remaining exterior portion of pole shall be provided with one coat of red oxide primer and two coats of aluminium paint incl taking down complete all as specified and directed. (Numbering of the poles shall be done with synthetic enameled painted letter of shape & size as directed.) The quoted rate includes cost for shifting of existing Cross arms, bracing, ACSR conductors insulators, GI wire from eisting pole to new poles. Note :- Excavation incl earth work and PCC foundation will be measured and paid separately. Make : (a) PS Steel Tubes Pvt Ltd (b) India Electrical Poles.(c) Surjit Steel Industries Mohali Punjab (d) National tubing Co. Kanpur(e) Fabrico Delhi road Meerut ( f) Quality steel Products Kanpur (g) Advance steel tubes Ltd Ghaziabad (h) RAMA steel tubes Ghaziabad

Supply & fixing in replacement of Air circuit breaker 4 pole 630 Amps 50 KA for one second as perIS/IEC 60947-2 ICS=ICu= 100%, fixed type, with thermal magnetic release fixed type , manual operated including dismantling & taking out old unserviceable ACB from panels & fabrication works to BUS bar for proper fitting complete all as directed and specified . Make :- Havells/L&T tandard/Schneider.

S&Fix repairs factory made sheet metal enclouser of thickness 2 mm suitable for fixing of MCCB 4 pole with fixing arrangments including supply and fixing MCCB 100 Amps 16 kA four pole (Ics=Icu=100%) with cable connections with gland packing complete all as specified. Make of MCCB :- Havells/L&T/Indoiasian

S&Fix repairs factory made sheet metal enclouser of thickness 2 mm suitable for fixing of MCCB 4 pole with fixing arrangments including supply and fixing MCCB 315 Amps 35 kA four pole (Ics=Icu=100%) with cable connections with gland packing complete all as specified Make of MCCB :- Havells/L&T/Indoiasian

Trimming of tree branches touching to over head lines, upto 1.5 mtr distance all around of ACSR conductors of span 30meter to 50 meter of HT/LT feeders and depositing cut branches away from site as directed and clearence of HT/LT pole and sub station premises all as directed by Engg-in-charges. Note: (i) Trimming of all branches of trees falling under one span between two pole shall be shall be considered as as one span only. (ii) Contractor have to arrange all T&P , safty equipments manpower and vehicle for trimming at different locations. Contractor or his rep has to ensure power shut down of overhead lines before carrying out trimming. Contractor shall be responsible for any lapses/ mishapning occured due to negelency of safty aspects.

M&L for cleaning of electric substation/installations including cutting/removing of grass, bushes and trimming of branches of trees inside the premises complete all as specified and as directed.

M&L for Reinforced cement concrete (normal mix) type B0 1:2:4 (12.5 mm graded aggregate) for duct slab for cover of ducting, RCC slabs including demolition of old unserviceable all as directed.

M&L for reinforcement 6 mm and over using TMT bars cut to length bent to shape as required including cranking bending spirally for hooking ends and binding with and including mild steel wire (annealed not less than 0.9mm dia or securig with clips etc complete all as specified and directed.

M&L MS angles as fencing port, struct cutting tops in shape incl all necessary drilling, notching and reveting etc and similar work confirming fe 310-0 pr fe 4120-0 all as specified and directed.

M&L for structural MS frame work half round or other stock section including securing posts and stuts in fencing, frame work for gates of substations, base frame for equipments including securing bolts, posts and sturts in fencing including cutting and makeing shapes as desired, drilling holes, notching for wire cut to size and made to the exisitng shape suitable for fixing MS chequred duct covers / door panels, including nuts, bolts and washers, welding / bracing works, bending cold or hot drilling holes for bolts in any shapeetc flat iron fillets (for securing wire mesh etc) all necessary drilling, bolting or riveting etc and similar work confirming to Fe-290 Gde E-165 including one coat of primer and two coats of synthetic enamel paint to the entire steel surfaces all as specified and directed.

M&L for chain link MS galvanised fencing including lines wires, dia of chain link n less than 3.5 mm any mesh any size any type to any type strands rails, straining bolts etc.

S&F mild steel screw bolt (mechine made) with hexagonal or square, head, n.exc 5 cm but n.ecx 10 cm dia.

M&L TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and includingmild steel wire (annealed) not less than 0.9 mm dia or securing with clips all as directed.

S&F galvanised 2 strand steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacing and straining and fixing to any type of standard rails straining bolts including securing or tying at crossing with and provision of galvanised mild steel wire staples or steel pins etc as directed. Note - Each line of horizontal/vertical/diagonal wire to be measured for purpose of payment.

Supplying, installing, testing and commissioning of gang operated air-break, triple pole off load switch with drop out fuse set 12 insulator type, mounted on channels outdoor, vertical mounting type HT 11KV, 50 Hz of rating 400 Amps, ISI marked, mechanically operated, mounted on insulators and frame work with operating mechanism worked from ground level with adequate lenth of GI pipe 25 mm dia medium grade , and locking arrangements, complete with fuse mounts, fuse carriers and HT fuse elements having 30 amp rating suitable for incl. necessary electric connections, complete all as specified. Make : Jaipuria Brothers / HEI/ Southern Switch Gear/ PACTIL/MULL & CO

Supply, erection and connection in replacement new Pre- streessed concrete poles 152 mm x 152 mm at top and 152 mm x 260 mm at bottom, class 9, 11.0 mtrs long(Numbering of the poles shall be done with synthetic enameled painted letter of shape & size) including taking down of old unserviceble pole & shifting of cross arms ACR conductor , GI wire, insulator, street light brackets etc complete all as directed. Note :- Excavation incl earth work and PCC foundation will be measured and paid separately. The old unserviceable pole obtained from dismanting shall be remove by the contractor form cantt area/MOD. If the contractor has not removed the dismantled item a penality of Rs.500.00 per pole will be charged from the contractor as a penality. Make : Hindustan Pressed concrete Faridabad / M/s Indian PCC poles / M/s Concrete Ugyog Jhansi.

Taking out under ground, LT cables, different sizes, by excavation and earth work in any type of soil, removing bricks or PCC tiles of any size, re-laying in the same trenches or re-routing after rectification of fault as required complete all as specified and directed NOTE:- (i) Joints & Jointing materials, new cable, additional bricks/PCC Covers, sand shall be measured & paid for separetely. (ii) Retrieved serviceable bricks or PCC cable cover and sand shall be re-laid on the cable & the cost for the same is deemed to be included in the unit rate.

Supply, lowering , jointing and testing Galvanised iron (heavy grade) pipe of dia 100 mm bore in standard length 5.5/6 mtr for pipe earthing in sub stations in cluding all fittings as requirement at site complete all as specified ,Make :- Jindal/TATA/Surya

M&L for boring hole with mahinary of size 150 mm dia upto 6 meter depth below ground level in any kind of soil strata including lowering down 100 mm dia GI pipe as directed by Eng in -charge

Supply, fixing and welding of earthing lead of size 32x6 mm GI strip fixed in ducts / on wall / in trenches / floors etc for earthing complete fixed to equipment / test point / earth electrode complete all as specified and directed

M&L for providing salt and charcoal of coke for pipe eathing in alternate layers at minimum 300 mm each layer surrounded and inside portion of GI pipe lowered in 150 mm bore hole from bottom to top also providing funnel and wiremesh over the pipe, making chamber of PCC (1:4:8) type D-2 using 40 mm graded stone aggregate and coping shall be in PCC(1:3:6) type C-1 using 20 mm graded stone aggregate, 50 mm thick cover of RCC (1:2:4) type B-1 using 20 mm graded stone aggregate, reinforced with 8 mm dia TMT bars @ 80 mm c/c boath ways

M/S RAJ KUMAR SINGH

M/S Kharya Associates

m/s gupta trading

BHARAT NIRMAN INFRASTRUCTURE COMPANY