REPAIR OF CERTAIN ROAD INCLUDING ROAD FURNITURE ITEM INSIDE COD KANPUR UNDER AGE B/R-I OF GE (I) KANPUR

Amount

M&L preparing black top surfaces by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surfaces with gunny gags to remove all loose dirt etc complete all as specified and directed.

M&L for applying primimng / tack coat with bituminous primer @ 5 kg per 10 sqm complete all as specified and directed.

M&l for providing premixed bituminous carpet 30mm thick consolidated thickness with 0.54 cum of suitable aggregate of grading as specified mixed with 29.2 Kgs binder laid with self-propelled mechanical pavers rolled with 8 to 12 tone power roller to required to gradient and camber complete all as specified and directed. Note : Bituminous premixed shall be mixed in hot mix plant and premixed carpet shall be mixed in hot mix plant and premixed carpet shall be laid in single layer with self propelled mechanical pavers (SPMP) complete all as specidied and directed.

M&l for premixed sand seal coat with 0.06 cum of sand mixed with 6.8 kg of bitumen binder, applied and rolled to a uniform smooth surface complete all as specified and directed.

M&L for Scarifying or picking gravelled, macadam or bituminous macadam surfaces in area not exc 400 sqm and depth exc 50 mm and n.exc 100 mm and removing from site of work complete all as specified and directed.

M&L for premix bituminous, macadam laid/rolled and compacted to required gradient and camber (consolidated thickness 75mm or less) using paving bitumen of any penetration 4% bitumen binder by weight of total mix complete all as specified and directed.

M&L for WBM 15 cm thick (7.5 cm thick in each layer) (compacted thickness) with coarse stone aggregate of Grading 2 (63 to 40 mm size ) spread & rolled with 8 to 12 Tonne power roller, rolled & consolidated to required gradient & camber complete all as specified and directed.

M&l for preparing unsurfaced WBM surfaces by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surfaces with gunny bags to remove all loose dirt and applying evenly a primimng / tack coat with bituminous primer @ 10 kg per 10 sqm complete all as specified and directed.

Removing excavated road material n exc 50 mtr and deposited where directed at a level n exc 1.5 m above the starting point complete all as specified and directed.

M&L preparing black top road surface applying thermo plastic paint on marking of min 2 mm thick single coat a centre line and edge line etc. Road marking of 150/100 mm width using hot mark thermoplastic paint (hot application) white or yellow by indigenous modern propelled road marking machine as directed incl all ingredient such as binder, glass beads, titanium dioxide, calcium carbonate, inter fillers etc,thermoplastic requirement for glass bends shall be confirming to BS-6086 of most specification incl. spraying of glass beads etc as per IRC-35 complete all as specified and directed.

S&F cat eye’s 100mmx100mmx20mm made of polycarbonate with electronically welded prismatic retro reflective lenses on two side for maximum retro reflection in wet and dry condition fixed with bitumen adhesive fixed at suitable distance including necessary preparation complete all as specified and directed

S&F in repairs smart solar road studs of size 125x 125mm & 20mm tk & 55mm long 40mm dia stand with 6 Nos diode bulb s(3 Nos each side) electronically operated & designed to operate automatically in darkness, powered from rechargeable nickle cadmium battery to be charged through solar cells, main frame cast alu with polycarbonate cover solar cells & yellow reflected polycarbonate cover on side complete all as specified and directed.

Manufacturing, supplying and fixing retro reflective Mandatory/ Regulatory sign boards of 900 mm diametre with support length of 3750 mm and made up of 2 mm thick aluminium sheet, face to be fully covered with high intensity encapsulated type heat activated retro reflective sheeting conforming to type - IV of ASTM-D 4956-01 in blue and silver white or other colour combination including subject matter, message (bi-lingual), symbols and borders etc. as per IRC ; 67:2001, pasted on substrate by an adhesive backing which shall be activated by applying heat and pressure conforming to class -2 of ASTM-D-4956-01 and fixing the same with suitable sized aluminium alloy rivets @ 20 cm c/c to back support frame of M.S. angle iron of size 25x25x3 mm along with theft resistant measures, mounted and fixed with 2 Nos. M.S. angles of size 35x35x5 mm to a vertical post made up to M.S. Tee section ISMT 50x50x6 mm welded with base plate of size 100x100x5 mm at the bottom end and including making holes in pipes, angles flats, providing & fixing M.S. message plate of required size, steel work to be painted with two or more coats of synthetic enamel paint of required shade and of approved brand & manufacture over priming coat of zinc chromate yellow primer (vertical MS-Tee support to be painted in black and white colours).Backside of aluminium sheet to be painted with two or more coats of epoxy paint over and including appropriate priming coat including all leads and lifts etc. complete as per drawing , specification and direction of Engineer-in-charge.

S&F speed breaker size 250X350X50mm made of rubber having, high resistance of severe impact and brutual weather condition complete all as specified and directed.

S&F road safety polycarbonate convex mirror (size 950 mm dia) made up of polycarbonate relective and body made of ABS/Fibber/Plastic of size 100cm dia including MS pipe 75mm dia of 2.0M length duly powder coated embeded in PCC 1:2:4 of size 45cm x 45cm x 45 cm and excavation earth work complete all as specified and directed.

S&F ABS round body (Delineator) fitted with 2 Nos 100mm dia high reflective reflectors having a pipe (duly powder coated) of 50mm dia anti rust and two small rectangular reflectors of size 70x23mm Nos each side are provided for better reflectivity complete all as specified and directed.

U.R ASSOCIATES (BID ID -3331933)

M/s DELTA ERECTORS PVT LTD (BID ID -3340854)

SEAHAWK ENTERPRISES PVT LTD (BID ID -3332325)

ARORA BROTHERS (BID ID -3333406)