CWE/GGN/GT-20/2026-27

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) not exc 1.5 sqm each, including cutting holes for removing the hold fast etc. (disturbed surface of wall shall be make good by the contractor. the rate quoted shall be deemed included for the same) complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutter from frames) exc. 1.5 Sqm but n exc 4 Sqm each, including cutting holes for removing the hold fast etc (Distrubed surface of wall shall be make good by the contractor. The rate quoted shall be deemed included for the same) complete all as specified and as directed.

Taking down shutters of any description exceeding 1.0 sqm but not exceeding 2.0 sqm each from chowkhat complete all as specified and as directed

S&F powder coated coloured anodized aluminium frame (minimum thickness of powder coating 50 micron) double/triple track for doors, windows, ventilations, partition with one or more rebates including joining cleat for fixing etc. complete all as specified and as directed

S&F window or ventilators section of frame 72x55mm fixed to wall or concrete surface with rowl plugs made of galvanised steel powder coated and section of shutter 47x20mm mulion section 72x50mm (Based steel as per IS 513 "D" quality galvanised as per IS 277 with zinc of 120 gms/sqm) glazed or gauged and wire gauge shutter prepare to receive wire mesh to the shutter (double shutter, gauged and glass) with total coated thickness of 0.6mm including 4.8/5.0mm thick sheet glass for window shutter and 4.8/5.0mm thick frosted glass for ventilators, 0.36mm stainless steel wire cloth with 1.40mm aperature for wiremesh shutter and 12 mm MS grills/guard bars made of square bars powder coated including painting & opening for cooler space where required fixed to window frame with screws including necessary fittings and all builders hardware such as handles, tower bolts, hinges, stays etc complete all as specified and as directed by Engr-in-Charge. Make : NCL type-4000 Series or equivalent of make as mentioned in list of makes as approved by GE.

S&F powder coated coloured anodized aluminum door shutters (Thickness of powder coating not less than 50 micron), aluminum section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing handles 2 Nos in each door,100 mm long hinges (3 Nos), anodized aluminum snap beading screws etc. complete all as specified. and as directed

S&F 9 mm thick both side prelaminated particle board exterior grade in bottom panel of aluminium door including neoprene rubber gasket in aluminium frame work, alm glazing clips complete all as specified and as directed.

S&F for 4.8/5.0 mm thick sheet glass ordinary quality and glazing each pane n exc 0.50 Sqm fixed with neoprene rubber gasket in aluminium frame work complete all as specified.

S & F for toughned glass,door/partiton 10mm thick including making holes in glass and all assesories for fixed in posn all as specified and directed.

S&F 5.5 mm thick black sheet glass and glazing fixed with neoprene rubber gasket in aluminium frame work complete all as specified and as directed.