Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹20.8 LAccepted-AOC AUSTINABAD CHINTAMBAR COLONY PORT BLAIR SOUTH ANDAMAN 744 103 | PORT BLAIR | SOUTH ANDAMAN | ANDAMAN AND NICOBAR ISLANDS | 744103 | L1 | Accepted-AOC L1 | |
| 2 | L2₹21.5 L+₹65,990.90 (3.17%)Rejected-Finance C O AMBU HOTEL NEAR GOVT POLYTECHNIC DOLLY GUNJ PORT BLAIR 744 103 | PORT BLAIR | SOUTH ANDAMANS | ANDAMAN AND NICOBAR ISLANDS | 744103 | L2 | Rejected-Finance Rejected due to L2 | |
| 3 | L3₹23.1 L+₹2.3 L (10.9%)Rejected-Finance | L3 | Rejected-Finance Rejected due to L3 | |
| 4 | L4₹23.2 L+₹2.4 L (11.5%)Rejected-Finance MES WORKS SITE CARNICOBAR ANDAMAN NICOBAR ISLAND PIN 744301 | CARNICOBAR | NICOBAR | ANDAMAN AND NICOBAR ISLANDS | 744301 | L4 | Rejected-Finance Rejected due to L4 |
| Sl No | Description | Qty | Unit | ASHOK BISWAS L4 | SUMAN L1 | RADHA GOVIND CONSTRUCTION L3 | City Constructie Pvt Ltd L2 |
|---|---|---|---|---|---|---|---|
| 1.00 | Excavation in trenches n. exc 1.5m wide and n. exc 1.5m deep and getting out in any type of soil including forming bottom surface complete all as specified and as directed. | 26 | CUM | 500 ₹13,000 | 100 ₹2,600 Lowest | 450 ₹11,700 | 150 ₹3,900 |
| 2.00 | Excavation in trenches n.exc 1.5m wide and exc 1.5m and n.exc 3.0m deep and getting out in any type of soil complete all as specified and as directed. | 2.6 | CUM | 500 ₹1,300 | 100 ₹260 Lowest | 450 ₹1,170 | 150 ₹390 |
| 3.00 | M&L for PCC (1:4:8) type D2 (40mm graded aggregate) Cement concrete in foundations, filling and mass concrete complete all as specified and as directed. | 2.6 | CUM | 10,000 ₹26,000 | 9,000 ₹23,400 | 9,000 ₹23,400 | 8,000 ₹20,800 Lowest |
| 4.00 | M&L for providing cement concrete type B-l, 1:2:4 (20 mm graded aggregate) in posts, plinth courses, string courses, lacing courses, parapets and copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating complete all as specified and as directed. | 26 | CUM | 11,500 ₹2,99,000 | 10,500 ₹2,73,000 Lowest | 11,000 ₹2,86,000 | 11,000 ₹2,86,000 |
| 5.00 | S&F mild steel TMT bars 10 mm dia and over ,cut to length , bent to shape required, including cranking , bending spirally for columns hooking for columns hooking ends and binding with and including mild steel wire ( annealed ) not less than 0.9mm dia or securing with clips complete all as specified and as directed. | 222 | KG | 110 ₹24,420 Lowest | 130 ₹28,860 | 150 ₹33,300 | 130 ₹28,860 |
| 6.00 | S&F for Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) of Fe 410-W(Gde-E-250) quality B complete all as specified and as directed. | 5,827.5 | KG | 150 ₹8,74,125 | 133 ₹7,75,057.5 Lowest | 150 ₹8,74,125 | 140 ₹8,15,850 |
| 7.00 | S&F Plates (plain or chequered) channels, square cut or notched with fabrication and erection of Fe-410W (Gde E-250) Quality A (ordinary and counter sunk) forming holes, without any attachment complete all as specified and directed | 531 | KG | 160 ₹84,960 | 133 ₹70,623 Lowest | 150 ₹79,650 | 140 ₹74,340 |
| 8.00 | S&F Steel work in tubular trusses, columns etc including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.11611979 grade St.-240 as in column, truss, purlins etc complete all as specified and as directed. | 1,557 | KG | 150 ₹2,33,550 | 133 ₹2,07,081 Lowest | 150 ₹2,33,550 | 140 ₹2,17,980 |
| 9.00 | S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed. | 302 | SQM | 1,080 ₹3,26,160 | 920 ₹2,77,840 | 1,100 ₹3,32,200 | 900 ₹2,71,800 Lowest |
| 10.00 | S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/rain water gutter/valley gutter/cladding to wall, fixed with self tapping screws complete all as specified and as directed. | 22.5 | SQM | 1,050 ₹23,625 | 850 ₹19,125 Lowest | 1,100 ₹24,750 | 900 ₹20,250 |
Tender Value
₹27 L
EMD Value
₹54,000
Closing Date
4 Dec 2025, 6:00 pmClosed
GE (South) Diglipur
GE (South) Diglipur RK Gram Diglipur North Andaman 744202
PROVISION OF WEATHER PROOF SHED FOR RAMP AT OLD OTM UNDER GE(S) DIGLIPUR
2025_MES_739554_1
8173/E8
Open Tender
Civil Works
Item Rate
270 days
Diglipur
Please refer Tender documents.
7 documents required · 7 mandatory
₹500
GE (South)
₹54,000
Yes
29 Dec 2025
13 Nov 2025
8 Dec 2025
13 Nov 2025
4 Dec 2025
27 Nov 2025
14 Nov 2025 - 20 Nov 2025
Amount
Excavation in trenches n. exc 1.5m wide and n. exc 1.5m deep and getting out in any type of soil including forming bottom surface complete all as specified and as directed.
Excavation in trenches n.exc 1.5m wide and exc 1.5m and n.exc 3.0m deep and getting out in any type of soil complete all as specified and as directed.
M&L for PCC (1:4:8) type D2 (40mm graded aggregate) Cement concrete in foundations, filling and mass concrete complete all as specified and as directed.
M&L for providing cement concrete type B-l, 1:2:4 (20 mm graded aggregate) in posts, plinth courses, string courses, lacing courses, parapets and copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating complete all as specified and as directed.
S&F mild steel TMT bars 10 mm dia and over ,cut to length , bent to shape required, including cranking , bending spirally for columns hooking for columns hooking ends and binding with and including mild steel wire ( annealed ) not less than 0.9mm dia or securing with clips complete all as specified and as directed.
S&F for Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) of Fe 410-W(Gde-E-250) quality B complete all as specified and as directed.
S&F Plates (plain or chequered) channels, square cut or notched with fabrication and erection of Fe-410W (Gde E-250) Quality A (ordinary and counter sunk) forming holes, without any attachment complete all as specified and directed
S&F Steel work in tubular trusses, columns etc including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.11611979 grade St.-240 as in column, truss, purlins etc complete all as specified and as directed.
S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.
S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/rain water gutter/valley gutter/cladding to wall, fixed with self tapping screws complete all as specified and as directed.
M&L Preparation of new or previously untreated steel surfaces and applying two coats of synthetic enamel paint including one coat of red oxide primer complete all as specified and as directed.
S&F for mild steel works in Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and as directed.
M&L for hard core of broken stone or boulders of gauge n.exc.63mm, deposited, spread, levelled in layers n.exc.15cm thick, watered and rammed to a true surface complete all as specified and as directed.
M&L for 75mm thick cement concrete (1:4:8) type D2 using 40 mm graded stone aggregate as Sub base of flooring complete all as specified and as directed.
M& L For 100 mm thick PCC flooring type B1 (1:2:4) using 20 mm graded stone agg flooring surface finished even and smooth with using extra cement complete all as specified and as directed.
M&L precast cement concrete type C1 (1:3:6) using (20mm graded stone aggregate) solid blocks masonry exc. 10cm in width and set in cement mortar 1:6 complete all as specified and as directed.
M&L for rendering 15mm thick on fair faces of brick or concrete surfaces in cement mortar in two layers 10mm thick in CM (1:4) followed by 5mm thick plaster in CM (1:4) complete all as specified and as directed.
M&L for Preparing newly plastered surfaces of walls and applying two coats of cement based paint on walls over a coat of primer complete all as specified and as directed
Removing excavated materials of soils n exc. 50 m and depositing where directed at a level not exc. 1.5 m above the starting point complete as specified and directed.
S&F for 150mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls as in rain water pipes complete all as specified and as directed.
S&F for 150mm PVC (SWR) bends any radius complete all as specified and as directed.
Returning, filling in excavated soil including, spreading, levelling, watering, well ramming in layers not exceeding 25 cm complete all as specified and as directed.
Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10 sqmm 2 core complete all as specified and as directed.
Supply and laying of DWC (Double Wall Corrugated) HDPE pipe, ISI marked IS 14390 Part-II, of outer dia 40 mm and inner dia 32 mm with smooth internal and profiled external surface for non pressure under ground cable including all connected accessories like coupler 'O' Ring etc for protection of cable complete all as specified and as directed.
S&F for LED flood light fitting 1X150 Watts, 220 volts, AC outdoor type with driver, high-pressure die cast aluminium hosing and heat resistance complete with IP 66 protection, fixed to shed, connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed.
Supply, laying & testing 1100 volts flexible PVC insulated overall shielded electric control cables (heavy duty) with stranded copper conductor of size 1.5 sqmm x2.0 core complete all as specified and as directed.
S&F for 15mm dia tubes light grade galvanised with all fitting, laid in trenches complete all as specified and as directed.
M&L for Earthing complete with galvanised steel plate electrode of size 600x600x6.30mm thick burried directly in ground with earth pit not less than 2.25 meter deep below normal ground level with top edge of plate not less than 1.5 meter below normal ground level connected to galvanised 4 mm dia earth lead by means of nuts bolts check nuts GI washers earth wire protected by galvanised iron pipe 15mm bore (Light grade) for building LT wall panel all as directed including concrete pit in PCC (1:3:6) type CI, precast RCC cover slab of size 30x30x10 cm with one handle for lifting made out of 8 mm diameter MS bar finnel wire mesh 20 mm bore galvanised iron pipe (medium grade) for watering charcoal or coke and salt in alternate layers necessary earth work in soft/loose soil with and including taking down the old one complete all as shown in electrical plate No 3 of SSR Part I 2009 including testing on completion complete all as specified and as directed.
M&L for Point wiring for one light/fan point controlled by one switch one way using approved colour coding as per IS, with stranded copper conductor 1.5 sqmm (nominal area), single core, flame retardant low smoke(FRLS), PVC insulated and unsheathed cable 1100 volts grade, ISI 694 marked TEC and FIA approved in and including PVC casing and caping/PVC conduit and its fittings ISI marked, with PVC flush boxes suitable for modular/normal switch/sockets etc with earth dolly incl covered with suitable module cover plate with frame including flame retardant low smoke (FRLS) PVC insulated unsheathed stranded copper conductor 1.5 sqmm (nominal are) single core cable as earth continuity conductor to common earth and connected to earth dolly completion complete all as specified and as directed.
S&F for switch piano flush type single pole one way 6 amps completion complete all as specified and as directed.
S&F for ceiling rose 3 phase/PVC/polycarbonate isolated body completion complete all as specified and as directed.
S&F for sheet metal enclosure for DB's (double door type) when MCB 's to be used, single pole and neutral , 8 ways including blacking plate with 200 amp rated bus bar, 240 volts fixed sunk/flush to the wall completion complete all as specified and as directed.
S&F 240V, 10ka 'c' Curve miniature circuit breaker (MCB) 0f MCB SPN 32 amp 240 volts completion complete all as specified and as directed.
S&F 240V, 10ka 'c' Curve miniature circuit breaker SP 6-32 Amp, 240 Volts completion complete all as specified and as directed.
M&L for sub main wiring with 2 runs of 4.0 sqmm PVC insulated unsheathed copper cable multistranded 1100 volts, FRLS grade with drawn in PVC casing caping and one run of 6 sqmm PVC insulated copper cable as earth continuity conductor drawn in PVC casing capping all as specified and directed. Note : 3 runs of 6 sqmm copper cable and 1 run of PVC casing capping will be measured as one unit i.e RM completion complete all as specified and as directed.
S&F for LED lights fitting 1x 20W, 220V,AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose completion complete all as specified and as directed.
City Constructie Pvt Ltd (BID ID -3489545)
RADHA GOVIND CONSTRUCTION (BID ID -3489580)
ASHOK BISWAS (BID ID -3488926)
stage.html
html • 0.05 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.67 MB
BOQ_828119.xls
BOQ • 0.34 MB
Tender8173.pdf
Tender Documents • 1.43 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .