Drilling of bore well

Drilling of borewell by down the hole Hammer (DTH) Drilling o finished Dia of 165mm in all formations suitable for down the hole hammer drilling ,hard rock formation all consolidated formation etc., and drilling over in over burden to dia not less than 200mm et., any other relevent materials required upto the depth as directed by the department and transportation of drilling rigs and supporting vechiles and invluding borewell at an average presure of 7kg/cm2 100 PSI conducting yield test. Includsive of transportation point to point crew charges The Borewell should be true and verticle and work should carried out of the satisfaction of the department. but excluding cost of casing pipe conduting and cap.

Supply delivery and fixing of ISI -180mm dia (7") PVC Casing 6Kg/Sqm (Sor Pg.No. 623/668)

Supply delivery and fixing of ISI -250mm dia (10") PVC Casing 10Kg/Sqm (Sor Pg.No. 623/668)

Supply and Transportation of 5.00HP Star rated 12-16 Stage Three phase ISI submersible motor pumpset suitable for 6" Bore well. Makes: Kirloskar / Crompton / Texmo / CRI / KSB / Aryan Varsha ELEC5.7.1

63mm 16Kg/cm2 HDPE pipe (SoR page No. 613/668)

Supply of 3 Core 6.0 Sqmm Flat Copper cable as per IS 694:1990 for Submersible Motors. Makes : Finolex / RR Kabel / Havells / KEI / LK(L&T) / Pawancab ELEC-1.6.3

Supply & Fixing of D.O.L Starter 250V, Single phase, 50Hz. With Sheet Steel enclouser comprising of contactor with bi-metalic relay with neceSheet Steelary push buttons, etc., complete suitable Upto 10.0.HP. Makes: Siemens / LK (L&T) / BCH ELEC-5.5.1 (Page No. 377/668)

Supply and Transportation of control panel for three phase submersible motors up to 5 HP @ 415V 50Hz operating fitted with supply and fixing of Direct - on - Line LTLK /BCH/ SIEMENS / CROMPTON make, 0-500V Volt meter and 0-30A Ammeter, Indication lamps, selector switches, CTS, 32A TP MCB, Single phase preventor,suitable contactor to with stand low voltage pick up and high voltage resistant, with ISI marked capacitors assembled with ISI mark contactors and fitted with Legrand make ISI mark MCB etc., complete. 1 No 12032.00 1130 ELEC-5.11.1 Supply and Transportation of control

Supply of 25mm PPR Ball Valve conforming to DIN Standards 8077/8092 TBSP-J.III-185

Supplying & fixing Bronze Horizontal Check (Non return) Valve as per IS-778 I-class heavy duty - 40 mm NB Size TBSP-G.III-13

Supply and fixing of Nominal diameter of heavy duty couplings 48/40 mm UPVC pipe (27 Kgs / CM 2 ) capable of with standing up to 27 Kgs / CM2 above 200 mts and upto 300 mts/ suitable for 6½" dia borewell ELEC-5.12.2

Transportation and errection charges