J&K

Technical Eval

Works

Electrical and Maintenance Works

Reconditioning of 6.6KV slip ring type induction motor 750KW/1000HP BHEL make motor S3 installed at Tawi Pump House Jammu

I and FC

Executive engineer mechanicAL division rtic jammu | Jammu, Jammu And Kashmir

Amount: Refer DocsCloses: 21 May 2026Closed

Timeline

Published9 May 2026
Closed21 May 2026
Technical Evaluation20 Jun 2026
Award—

Bids

3 Bids20 Jun 2026

#	Company	Status
1	BEE AAR ENTERPRISES Accepted-Technical BHAGWATI NAGAR JAMMU	Accepted-Technical QUALIFIED
2	GS ENGG WORKS Accepted-Technical BYE PASS N H NEAR STATE BANK OF INDIA SIDHRA JAMMU	Accepted-Technical QUALIFIED
3	M/S RAGHUNATH MECHANICAL AND ELECTRICAL ENGINEERING WORKS Accepted-Technical	Accepted-Technical QUALIFIED

Tender Value

Refer Docs

EMD Value

₹4,700

Closing Date

21 May 2026, 3:00 pmClosed

Tender Inviting Organisation

Name

Executive engineer mechanical division rtic jammu

Address

Executive engineer mechanical division rtic jammu

Work Description

Reconditioning of 6.6KV slip ring type induction motor 750KW/1000HP BHEL make motor S3 installed at Tawi Pump House Jammu

Tender Information

Tender ID

2026_IFC_309675_1

Reference Number

NIT 05 OF 2026-27 DT. 09-05-2026

Tender Type

Open Tender

Product Category

Electrical and Maintenance Works

Form of Contract

Item Rate

Period of Work

21 days

Location

Executive engineer mechanicAL division rtic jammu

Source Website

Subscribe to view

Eligibility / Pre-Qualification

Please refer Tender documents.

Documents Required

8 documents required · 8 mandatory

Fee/PreQual/Technical

RequiredScan copy of Treasury challan (.pdf)

RequiredScan copy of CDR (.pdf)

RequiredScan copy of Pan Card (.pdf)

RequiredScan copy of GST Registration Certificate along with latest GST Return duly signed and stamp (.pdf)

RequiredScan copy of DIC/SSI registration certificate in case of claiming concession in EMD/ Tr. Challan (.pdf)

RequiredScan copy of Acceptance Certificate duly signed and stamp (.pdf)

RequiredRelevant Experience Certificate only (.pdf)

Finance

Requiredboq (.xls)

Fee & Financial Details

Tender Fee Amount

₹200

Tender Fee Exemption Allowed

Yes

Tender Fee Payable To

Executive engineer mechanical division rtic jammu

EMD Fee Amount

₹4,700

EMD Fee Exemption Allowed

Yes

Pre-Bid Meeting

Meeting Place

Executive engineer mechanicAL division rtic jammu

Important Dates

Last Activity

20 Jun 2026

Published

9 May 2026

Bid Opening

26 May 2026

Download Starts

9 May 2026

Download Ends

21 May 2026

Submission Starts

12 May 2026

Pre-Bid Meeting

11 May 2026

Bill of Quantities

Item RateBoQ_Ver3.0INR

BoQ1 (1 items)

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1.01	Dismantling of slip ring leads and copper cables, decoupling of pump and motor, HT side cable connections, dismantling slipring assembly along with damaged carbon brush bracket holders with carbon brushes, draining out all the motor oil from the oil chamber, hoisting and keeping the motor on horizontal position. Dismantling of top and bottom end covers, extraction of top thrust bearing with puller. Extraction of rotor from the stator extraction of the old damaged bearing from the rotor with the help of bearing puller. Providing and fitting of new bottom end bearing (APS) to 750 KW/1000 HP HT motor of reputed make by applying recommended quantity of servo gem 3 grease. Servicing of motor cleaning the rotor and stator windings with air and cleaning chemical, cleaning all the air-cooling vents of stator windings, varnishing rotor and stator winding of motors by applying two coats of Dr. Becktol red varnish. Dismantling of slip ring assembly of 6.6 KW 1000 HP HT Motor, extraction of damaged insulating sleeves, providing/fitting of new insulating sleeves, varnishing and drying out. Turning, finishing and polishing of all the rings to give an even finish. Providing and fitting of carbon brush bracket holders (locking arrangement) along with set of carbon brushes, made of material required grade, composition and specification as per sample fitted to 750 kw /1000 HP motor. Testing motor on full load. Complete job including cost of material and labour.Reassembling the rotor with the stator and other accessories. The job includes mounting /fitting of the motor skirt. Then making all the electrical connections to the motor and testing on full load. Complete job includes cost material and labour charges and to and fro charges..	-	Job	-	-

Stage Documents

Stage Summary Snapshot

stage.html

html • 0.02 MB

Technical Bid Opening

tech_bid_open.pdf

PDF

Technical Evaluation

tech_eval.pdf

PDF

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

Tender Page Snapshot

details.html

html • 0.03 MB

NIT Documents

Tendernotice_1.pdf

PDF • 0.22 MB

Work Item Documents

205.pdf

Tender Documents • 0.37 MB

BOQ_1002341.xls

BOQ • 0.23 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Company

BEE AAR ENTERPRISES

Accepted-Technical

BHAGWATI NAGAR JAMMU

GS ENGG WORKS

Accepted-Technical

BYE PASS N H NEAR STATE BANK OF INDIA SIDHRA JAMMU

M/S RAGHUNATH MECHANICAL AND ELECTRICAL ENGINEERING WORKS

Accepted-Technical

Sl No

Description

Qty

Unit

Est. Rate

Est. Amount

1.01

Dismantling of slip ring leads and copper cables, decoupling of pump and motor, HT side cable connections, dismantling slipring assembly along with damaged carbon brush bracket holders with carbon brushes, draining out all the motor oil from the oil chamber, hoisting and keeping the motor on horizontal position. Dismantling of top and bottom end covers, extraction of top thrust bearing with puller. Extraction of rotor from the stator extraction of the old damaged bearing from the rotor with the help of bearing puller. Providing and fitting of new bottom end bearing (APS) to 750 KW/1000 HP HT motor of reputed make by applying recommended quantity of servo gem 3 grease. Servicing of motor cleaning the rotor and stator windings with air and cleaning chemical, cleaning all the air-cooling vents of stator windings, varnishing rotor and stator winding of motors by applying two coats of Dr. Becktol red varnish. Dismantling of slip ring assembly of 6.6 KW 1000 HP HT Motor, extraction of damaged insulating sleeves, providing/fitting of new insulating sleeves, varnishing and drying out. Turning, finishing and polishing of all the rings to give an even finish. Providing and fitting of carbon brush bracket holders (locking arrangement) along with set of carbon brushes, made of material required grade, composition and specification as per sample fitted to 750 kw /1000 HP motor. Testing motor on full load. Complete job including cost of material and labour.Reassembling the rotor with the stator and other accessories. The job includes mounting /fitting of the motor skirt. Then making all the electrical connections to the motor and testing on full load. Complete job includes cost material and labour charges and to and fro charges..

Job