Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Tender Value
₹47.8 L
EMD Value
₹95,600
Closing Date
9 Dec 2026, 6:55 pm
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
GE Chennai
GARRISON ENGINEER FORT SAINT GEORGE CHENNAI - 600009
SPECIAL REPAIRS REPLACEMENT OF BER PUMPING SETS AT WATER SUPPLY INSTALLATION UNDER GE CHENNAI
2026_MES_799364_1
8107/E8
Open Tender
Civil Works
Item Rate
180 days
GE Chennai
As per tender details
7 documents required · 7 mandatory
₹500
GE Chennai
₹95,600
Yes
18 Nov 2026
18 Nov 2026
11 Dec 2026
18 Nov 2026
9 Dec 2026
2 Dec 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Supply, installation, testing and commissioning of 1 HP (0.75 kW) Horizontal End Suction Centrifugal Pump Set complete with 230 V, Single Phase, 50 Hz, TEFC squirrel cage induction motor, IP55 protection, Class 'F' insulation, 2880 RPM, cast iron pump casing, bronze/stainless steel dynamically balanced impeller, stainless steel shaft, mechanical seal, antifriction bearings, suitable for 50–100 LPM discharge against a total head of 24–32 metres with a maximum suction lift of 7 metres, complete with 32 mm (1¼") suction inlet and 25 mm (1") delivery outlet, common MS base frame, foundation bolts, suction and delivery unions/flanges, non-return valve, isolating valve, pressure gauge, all necessary accessories, wiring from local isolator, earthing, alignment, testing, commissioning and trial run, complete in all respects as specified and directed by the Engineer-in-Charge. | 1 | Each | - | - |
| 2 | Supply, installation, testing and commissioning of 3 HP (2.2 kW) Horizontal End Suction Centrifugal Pump Set complete with 415 V, 3 Phase, 50 Hz, TEFC squirrel cage induction motor, IE3 efficiency, IP55 protection, Class 'F' insulation, 2900 RPM, cast iron pump casing, bronze/stainless steel dynamically balanced impeller, stainless steel shaft, mechanical seal, heavy-duty antifriction bearings, suitable for a discharge of 150–300 LPM against a total head of 30–40 metres with a maximum suction lift of 7 metres, complete with 50 mm (2") suction inlet and 40 mm (1½") delivery outlet, fabricated MS base frame, flexible coupling (where applicable) with coupling guard, foundation bolts, anti-vibration pads, suction and delivery flanges, non-return valve, sluice valve, pressure gauge, vacuum gauge, all necessary nuts, bolts, gaskets, wiring from local isolator, double earthing, alignment, testing, commissioning and trial run, complete in all respects as specified and directed by the Engineer-in-Charge. | 4 | Each | - | - |
| 3 | Supply, installation, testing and commissioning of 5 HP (3.7 kW) Horizontal End Suction Centrifugal Pump Set complete with 415 V, 3 Phase, 50 Hz, TEFC squirrel cage induction motor, IE3 efficiency, IP55 protection, Class 'F' insulation, 2900 RPM, cast iron pump casing, dynamically balanced bronze/stainless steel impeller, stainless steel shaft, mechanical seal, heavy-duty anti-friction bearings, fabricated MS common base frame, flexible coupling with coupling guard, foundation bolts, anti-vibration pads, suitable for a discharge of 300–500 LPM against a total head of 30–45 metres with a maximum suction lift of 7 metres, complete with 65 mm (2½") suction inlet and 50 mm (2") delivery outlet, suction and delivery flanges, non-return valve (NRV), sluice valve, pressure gauge, vacuum gauge, nuts, bolts, gaskets, wiring from local isolator, double earthing, alignment, testing, commissioning and trial run, complete in all respects as specified and directed by the Engineer-in-Charge. | 5 | Each | - | - |
| 4 | Supply, installation, testing and commissioning of 7.5 HP (5.5 kW) Horizontal End Suction Centrifugal Pump Set complete with 415 V, 3 Phase, 50 Hz, TEFC squirrel cage induction motor, IE3 efficiency, IP55 protection, Class 'F' insulation, 2900 RPM, cast iron pump casing, dynamically balanced bronze/stainless steel impeller, stainless steel shaft, mechanical seal, heavy-duty anti-friction bearings, fabricated MS common base frame, flexible coupling with coupling guard, foundation bolts, anti-vibration pads, suitable for a discharge of 500–700 LPM against a total head of 30–45 metres with a maximum suction lift of 7 metres, complete with 80 mm (3") suction inlet and 65 mm (2½") delivery outlet, suction and delivery flanges, non-return valve (NRV), sluice valve, pressure gauge, vacuum gauge, nuts, bolts, gaskets, wiring from local isolator, double earthing, alignment, testing, commissioning and trial run, complete in all respects as specified and directed by the Engineer-in-Charge. | 8 | Each | - | - |
| 5 | Supply, installation, testing and commissioning of 10 HP (7.5 kW) Horizontal End Suction Centrifugal Pump Set complete with 415 V, 3 Phase, 50 Hz, TEFC squirrel cage induction motor, IE3 efficiency, IP55 protection, Class 'F' insulation, 2900 RPM, cast iron pump casing, dynamically balanced bronze/stainless steel impeller, stainless steel shaft, mechanical seal, heavy-duty anti-friction bearings, fabricated MS common base frame, flexible coupling with coupling guard, foundation bolts, anti-vibration pads, suitable for a discharge of 700–1000 LPM against a total head of 30–50 metres with a maximum suction lift of 7 metres, complete with 80 mm (3") suction inlet and 65 mm (2½") delivery outlet, suction and delivery flanges, non-return valve (NRV), sluice valve, pressure gauge, vacuum gauge, nuts, bolts, gaskets, wiring from local isolator, double earthing, alignment, testing, commissioning and trial run, complete in all respects as specified and directed by the Engineer-in-Charge. | 1 | Each | - | - |
| 6 | Supply, installation, testing and commissioning of 20 HP (15 kW) Horizontal End Suction Centrifugal Pump Set complete with 415 V, 3 Phase, 50 Hz, TEFC squirrel cage induction motor, IE3 efficiency, IP55 protection, Class 'F' insulation, 2900 RPM, cast iron pump casing, dynamically balanced bronze/stainless steel impeller, stainless steel shaft, mechanical seal, heavy-duty anti-friction bearings, fabricated MS common base frame, flexible coupling with coupling guard, foundation bolts, anti-vibration pads, suitable for a discharge of 1200–1800 LPM against a total head of 35–55 metres with a maximum suction lift of 7 metres, complete with 100 mm (4") suction inlet and 80 mm (3") delivery outlet, suction and delivery flanges, non-return valve (NRV), sluice valve, pressure gauge, vacuum gauge, nuts, bolts, gaskets, wiring from local isolator, double earthing, alignment, testing, commissioning and trial run, complete in all respects as specified and directed by the Engineer-in-Charge. | 1 | Each | - | - |
| 7 | Supply, installation, testing and commissioning of 25 HP (18.5 kW) Horizontal End Suction Centrifugal Pump Set complete with 415 V, 3 Phase, 50 Hz, TEFC squirrel cage induction motor, IE3 efficiency, IP55 protection, Class 'F' insulation, 2900 RPM, cast iron pump casing, dynamically balanced bronze/stainless steel impeller, stainless steel shaft, mechanical seal, heavy-duty anti-friction bearings, fabricated MS common base frame, flexible coupling with coupling guard, foundation bolts, anti-vibration pads, suitable for a discharge of 1500–2200 LPM against a total head of 35–60 metres with a maximum suction lift of 7 metres, complete with 100 mm (4") suction inlet and 80 mm (3") delivery outlet, suction and delivery flanges, non-return valve (NRV), sluice valve, pressure gauge, vacuum gauge, air release valve, drain plug, nuts, bolts, gaskets, double earthing, wiring from local isolator, alignment, testing, commissioning and trial run, complete in all respects as specified and directed by the Engineer-in-Charge. | 2 | Each | - | - |
| 8 | Supply, installation, testing and commissioning of 30 HP (22 kW) Horizontal End Suction Centrifugal Pump Set complete with 415 V, 3 Phase, 50 Hz, TEFC squirrel cage induction motor, IE3 efficiency, IP55 protection, Class 'F' insulation, 2900 RPM, cast iron pump casing, dynamically balanced bronze/stainless steel impeller, stainless steel shaft, mechanical seal, heavy-duty anti-friction bearings, fabricated MS common base frame, flexible coupling with coupling guard, foundation bolts, anti-vibration pads, suitable for a discharge of 1800–2500 LPM against a total head of 35–65 metres with a maximum suction lift of 7 metres, complete with 100 mm (4") suction inlet and 80 mm (3") delivery outlet, suction and delivery flanges, non-return valve (NRV), sluice valve, pressure gauge, vacuum gauge, air release valve, drain plug, nuts, bolts, gaskets, double earthing, wiring from local isolator, alignment, testing, commissioning and trial run, complete in all respects as specified and directed by the Engineer-in-Charge. | 5 | Each | - | - |
| 9 | Supply, installation, testing and commissioning of 12.5 HP (9.3 kW) Horizontal Non-Clog Centrifugal Pump Set complete with 415 V, 3 Phase, 50 Hz, TEFC squirrel cage induction motor, IE3 efficiency, IP55 protection, Class 'F' insulation, 2900 RPM, cast iron non-clog volute casing, single-channel/semi-open dynamically balanced impeller suitable for handling sewage and solids, stainless steel shaft, mechanical seal with silicon carbide/carbon faces, heavy-duty anti-friction bearings, fabricated MS common base frame, flexible coupling with coupling guard, foundation bolts, anti-vibration pads, suitable for a discharge of 800–1200 LPM against a total head of 20–35 metres with a maximum suction lift of 7 metres, complete with 100 mm (4") suction inlet and 80 mm (3") delivery outlet, suction and delivery flanges, non-return valve (NRV), sluice/butterfly valve, pressure gauge, vacuum gauge, nuts, bolts, gaskets, double earthing, alignment, testing, commissioning and trial run, complete in all respects as specified and directed by the Engineer-in-Charge. | 1 | Each | - | - |
| 10 | Supply, installation, testing and commissioning of 10 HP (7.5 kW) Borewell Submersible Pump Set comprising multistage stainless steel centrifugal pump directly coupled with 10 HP, 415 V, 3 Phase, 50 Hz, water-filled/oil-filled rewindable submersible motor, suitable for continuous duty, complete with stainless steel impellers, stainless steel shaft, built-in non-return valve, suitable for a discharge of 300–600 LPM against a total head of 60–120 metres, suitable for installation in a 150 mm (6") borewell, complete with 100 mm (4") suction (pump inlet) and 65 mm (2½") delivery outlet, HDPE/GI delivery pipe, submersible flat cable, cable jointing kit, SS safety wire/chain, well cap, DOL/Star-Delta starter with dry-run, overload and single-phasing protection, double earthing, testing, commissioning and trial run, complete in all respects as specified and directed by the Engineer-in-Charge. | 2 | Each | - | - |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.37 MB
BOQ_896850.xls
BOQ • 0.31 MB
Tender8107.pdf
Tender Documents • 0.58 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .