COMPREHESIVE REPAIR MAINTENANCE OF CI DI GI PIPE LINES PUMPS AND MOTORS MOTOR PANELS AND ALLIED WORKS AT CENTRAL AREA UNDER AGE EM I IN GE C KIRKEE

Amount

Excavation in trenches n.exc 1.5 mtr wide and n.exc 1.5 mtr in depth for lying of pipe etc and getting out in soft / loose soil complete all as specified and directed by Engineer in Charge.

Excavation in trenches n.exc 1.5 mtr wide and n.exc 1.5 mtr in depth for lying of pipe etc and getting out in road cuttings/Hard dense soil complete all as specified and directed by Engineer in Charge.

Removing surplus soil to a distance n.exc 50 mtr and depositing where directed at a level n.exc 1.5 mtr above the starting point complete all as specified and directed by Engineer in Charge.

Returning filling in trenches including spreading ,leveling ,watering and well ramming in layers n . Exc 25 cm complete all as specified and directed by Engineer in Charge.

Taking up cast iron water mains (incl all fitting) 80mm bore dia of pipe with spigot and socket ends from trenches complete all as specified and directed by Engineer in Charge.

Taking up cast iron water mains (incl all fitting) 100mm bore dia of pipe with spigot and socket ends from trenches complete all as specified and directed by Engineer in Charge.

Taking up cast iron water mains (incl all fitting) 150mm bore dia of pipe with spigot and socket ends from trenches complete all as specified and directed by Engineer in Charge.

Taking up cast iron water mains (incl all fitting) 200mm bore dia of pipe with spigot and socket ends from trenches complete all as specified and directed by Engineer in Charge.

Taking up cast iron water mains (incl all fitting) 250mm bore dia of pipe with spigot and socket ends from trenches complete all as specified and directed by Engineer in Charge.

Taking up cast iron water mains (incl all fitting) 300mm bore dia of pipe with spigot and socket ends from trenches complete all as specified and directed by Engineer in Charge.

Material and Labour for Cutting cast iron pipes in position for insertion of fittings, mechanical joints etc for bore of pipe 80mm dia complete all as specified and as directed by Engineer in Charge.

Material and Labour for Cutting cast iron pipes in position for insertion of fittings, mechanical joints etc for bore of pipe 100mm complete all as specified and as directed by Engineer in Charge.

Material and Labour for Cutting cast iron pipes in position for insertion of fittings, mechanical joints etc for bore of pipe 150mm complete all as specified and as directed by Engineer in Charge.

Material and Labour for Cutting cast iron pipes in position for insertion of fittings, mechanical joints etc for bore of pipe 200mm complete all as specified and as directed by Engineer in Charge.

Material and Labour for Cutting cast iron pipes in position for insertion of fittings, mechanical joints etc for bore of pipe 250mm complete all as specified and as directed by Engineer in Charge.

Material and Labour for Cutting cast iron pipes in position for insertion of fittings, mechanical joints etc for bore of pipe 300mm complete all as specified and as directed by Engineer in Charge.

Material and Labour for Laying only 80 mm bore CI pipes with spigot and socket ends laid in trenches including thorough cleaning of old CI pipe by descaling internally with steel brushes equal to bore of pipe ,scraping, washing properly complete all as specified and directed by Engineer in Charge.(Note :- Pipe retrived from item no.5 which is found serviceable in every respect as decided by Engineer in charge shall only be used and measured.)

All as per item no.17 here-in-before but 100mm bore CI Pipe complete all as specified and directed by Engineer in Charge.(Note :- Pipe retrived from item no.6 which is found serviceable in every respect as decided by Engineer in charge shall only be used and measured.)

All as per item no.17 here-in-before but 150mm bore CI Pipe complete all as specified and directed by Engineer in Charge. (Note :- Pipe retrived from item no.7 which is found serviceable in every respect as decided by Engineer in charge shall only be used and measured.)

All as per item no.17 here-in-before but 200mm complete all as specified and directed by Engineer in Charge. (Note :- Pipe retrived from item no.8 which is found serviceable in every respect as decided by Engineer in charge shall only be used and measured.)

All as per item no.17 here-in-before but 250mm complete all as specified and directed by Engineer in Charge. (Note :- Pipe retrived from item no.9 which is found serviceable in every respect as decided by Engineer in charge shall only be used and measured.)

All as per item no.17 here-in-before but 300mm complete all as specified and directed by Engineer in Charge. (Note :- Pipe retrived from item no. 10 which is found serviceable in every respect as decided by Engineer in charge shall only be used and measured.)

Material & Labour for Ductile iron fittings such as bends (any type ,radius and angle), tapers any type (straight ,bend , increasing , decreasing or double socket etc.),Tee piece ,single branch 'Y'junction double branch ,collar etc. caps and plugs etc. as per IS:9523-2000 of class K-7 ,with internal cement mortor lining and external zinc and black bitumen coated of dia upto 150mm complete all as specified and directed by Engineer in Charge.

All as per item no.23 here-in-before but dia 200mm to 300mm complete all as specified and directed by Engineer in Charge.

Supply, laying, jointing & testing DI-K7 class with spigot and socket for 100 mm bore dia pipe,suitable for push on rubber joint ,with internal cement mortor lining ,and external zinc and black bitumen coated pipes in any lengths conforming to IS:8329-2000 includding Rubber Gasket & joints as per IS:9523-2000 laid in trenches /Road / Ducts / Footpath /on wall /on floor locations complete all as specified and directed by Engineer in Charge.

All as per item No.25 here-in-before but 150 mm bore dia complete all as specified and directed by Engineer in Charge.

All as per item No.25 here-in-before but 200 mm bore dia complete all as specified and directed by Engineer in Charge.

All as per item No.25 here-in-before but 250 mm bore dia complete all as specified and directed by Engineer in Charge.

All as per item No.25 here-in-before but 300 mm bore dia complete all as specified and directed by Engineer in Charge.

Taking up worn out GI steel tubing of 15mm bore incl all fittings from trenches complete all as specified and directed by Engineer in Charge.

Taking up worn out GI steel tubing of 20mm bore incl all fittings from trenches complete all as specified and directed by Engineer in Charge.

Taking up worn out GI steel tubing incl all fittings from trenches of 25mm bore complete all as specified and directed by Engineer in Charge.

Taking up worn out GI steel tubing of 40 to 50 mm bore incl all fittings from trenches complete all as specified and directed by Engineer in Charge.

Taking up worn out GI steel tubing of 80mm bore incl all fittings from trenches complete all as specified and directed by Engineer in Charge.

Taking up worn out GI steel tubing of 100mm bore incl all fittings from trenches complete all as specified and directed by Engineer in Charge.

Taking up worn out GI steel tubing of 150mm bore incl all fittings from trenches complete all as specified and directed by Engineer in Charge.

Material and Labour for Laying in trencehs/Fixing to wall GI water tubing 15 mm bore, medium grade, complete with and including all medium grade fittings complete all as specified and as directed by Engineer in Charge.

All as per item no.37 here-in-before but GI pipe of size 20 mm bore complete all as specified and directed by Engineer in Charge.

All as per item no.37 here-in-before but GI pipe of size 25 mm bore complete all as specified and directed by Engineer in Charge.

All as per item no.37 here-in-before but GI pipe of size 40 mm bore complete all as specified and directed by Engineer in Charge.

All as per item no.37 here-in-before but GI pipe of size 50 mm bore complete all as specified and directed by Engineer in Charge.

All as per item no.37 here-in-before but GI pipe of size 80 mm bore complete all as specified and directed by Engineer in Charge.

All as per item no.37 here-in-before but GI pipe of size 100 mm bore complete all as specified and directed by Engineer in Charge.

All as per item no.37 here-in-before but GI pipe of size 150 mm bore complete all as specified and directed by Engineer in Charge.

Material & Labour for taking apart and reassembling stuffing box of sluice valve SS Spindle in position suitable for existing sluice valve of 100 mm bore including replacement of gland packing complete all as spcified and as directed by Engineer in Charge. Note:- Nuts,bolts & washers required for the work shall be measured and paid separately as supply only under relevant item of this schedule.

Supply & Fix in repairs CI body non raising SS spindle sluice valve with cast iron wheel, of size 80mm bore, class PN-1.6 with SS spindle with brass nut, both ends flanged confirming to IS-14846 with standard bolts hole , fixing with nuts , bolts , washers ,rubber gasket etc complete in position of pipe line complete all as specified and directed by Engineer in Charge. Note:- (i) Rate of Rubber gasket required for the work shall be deemed to be inclusive in the quoted rate. (ii) Nuts,bolts & washers required for the work shall be measured and paid separately as supply only under relevant item of this schedule.

All as per item No.46 above but for size 100 mm bore complete all as specified and directed by Engineer in Charge.

All as per item No.46 here-in-before but size 150 mm bore complete all as specified and directed by Engineer in Charge.

All as per item No.46 here-in-before but size 200 mm bore complete all as specified and directed by Engineer in Charge.

All as per item No.46 here-in-before but size 250 mm bore complete all as specified and directed by Engineer in Charge.

All as per item No.46 here-in-before but size 300 mm bore complete all as specified and directed by Engineer in Charge.

Supply & Fix in repairs cast iron air release valves with air outlet, 100 mm dia flanged including fittings as required at site, making necessary modifications /arrangements for CI/MS/DI pipeline of bore upto 450mm complete all as specified and directed by Engineer in Charge.

Material and labour for dismantling & taking out carefully sluice valve head with gate, spindle and stuffing box of size 80 mm to 300 mm bore in position, replacement of worn out SS spindle & SS nut with new SS spindle & SS nut for sluice valve class PN 1.6/1.0 and refixing gate, spindle, nut, valve head with stuffing box incl necessary PTFE gland packing,nuts ,bolts ,washers ,gland bolts, rubbers gasket etc complete all as specified and as directed by Engineer in Charge. Note:-(1) SS spindle ,nuts shall be measured and paid separately as supply only. (2) Nuts ,bolts & washers whenever require new shall be measured and paid separately as supply only (3) PTFE gland packing and Rubber gasket shall be inclusive in the quoted rate of this item.

Supply only SS spindle for sluice valve class PN 1.6/1.0, 80 mm to 150 mm bore complete all as specified and as directed by Engineer in Charge.

Supply only SS spindle for sluice valve class PN1.6/1.0, 200 mm to 300 mm bore complete all as specified and as directed by Engineer in Charge.

Supply only SS nut suitably threaded internally as per spindle thread and to the size of wedge of valve gate for sluice valve 80 mm to 150 mm bore class PN 1.6/1.0 complete all as specified and as directed by Engineer in Charge.

All as per item No.56 here-in-before but size 200 mm to 300 mm bore complete all as specified and directed by Engineer in Charge.

Supply & Fix in repair gun metal gate valve with iron wheel head,screwed both ends for pipes 15mm bore complete all as specified and directed by Engineer in Charge.

All as per item No.58 here-in-before but of size 20 mm bore complete all as specified and directed by Engineer in Charge.

All as per item No.58 here-in-before but of size 25 mm bore complete all as specified and directed by Engineer in Charge.

All as per item No.58 here-in-before but of size 40 mm bore complete all as specified and directed by Engineer in Charge.

All as per item No.58 here-in-before but of size 50 mm bore complete all as specified and directed by Engineer in Charge.

All as per item No.58 here-in-before but of size 80 mm bore complete all as specified and directed by Engineer in Charge.

Supply & fix in repairs cast iron swing check non return valve confirming to IS:5312(Part I) of 1969 , both end flanged with rubber gasket & nuts, bolts & washers of sizes 80 mm to 100 mm bore complete all as specified and directed by Engineer in Charge.

Supply & fix in repairs cast iron swing check non return valve confirming to IS:5312(Part I) of 1969 , both end flanged with rubber gasket & nuts , bolts & washers of sizes 65 mm bore complete all as specified and directed by Engineer in Charge.

Supply & fix in repairs cast iron foot valve confirming to IS:4038 , flanged enf with rubber gasket & nuts , bolts & washers of sizes 80 mm bore complete all as specified and directed by Engineer in Charge.

Supply & fix in repairs cast iron foot valve confirming to IS:4038 , flanged enf with rubber gasket & nuts , bolts & washer sof sizes 65 mm bore complete all as specified and directed by Engineer in Charge.

Supply & fix in repairs cast iron foot valve confirming to IS:4038 , flanged enf with rubber gasket & nuts , bolts & washer sof sizes 50 mm bore complete all as specified and directed by Engineer in Charge.

Note for Item No 64 to 68:- Nuts, bolts & washers required for the subject work shall be measured and paid separately under relevant item of this schedule.

Supply and Fix mild steel screw bolts (machine made) with hexagonal heads at one end and screwed the other , each screwed end to be fitted with washers and one hexagonal nut n exc 10cm long , 10 to 20 mm dia of neck complete all as specified and as directed by Engineer in Charge.

Supply & Fix MS mechanical joint with rubber washer , mild steel screw bolts (machine made) with screwed both ends of dia as per flange hole and required length each screwed end to be fitted with washers and one hexagonal nut suitable for bore of pipe 80mm complete all as specified and directed by Engineer in Charge.

All as per item no. 70 above but suitable for bore of pipe 100mm complete all as specified and directed by Engineer in Charge.

All as per item no. 70 above but suitable for bore of pipe 150mm complete all as specified and directed by Engineer in Charge.

All as per item no. 70 above but suitable for bore of pipe 200mm complete all as specified and directed by Engineer in Charge.

All as per item no. 70 here-in-before but suitable for bore of pipe 250mm complete all as specified and directed by Engineer in Charge.

All as per item no. 70 here-in-before but suitable for bore of pipe 300mm complete all as specified and directed by Engineer in Charge.

Material and labour for cement plaster 10mm thick in CM1:4 on fair faces of brick work or concrete surfaces finished even and fair incl taking down plaster any description , racking out joints , hacking for key , scrubbing down with water complete all as specified and directed by Engineer in Charge.

Material and labour for PCC 1:3:6 type-C2 (using 40mm graded stone aggregate) as in foundation, filling and mass concrete incl necessary form work and incl demolition of cement concrete (un-reinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed by Engineer in Charge.

Material & Labour for mild steel framed work with ends of bars souldered, welded or reveted or forced into spikes, framed guard bars, ladders, framed balusters, walk ways, railings, gates, frame work of water tank, valvepit , angles fixed independently for fencing post and other confirming to Fe 410 Gde-E-250, quality A including cutting dead length whererequire, notching, drilling, fitting or welding or connecting with bolts incl painting with one coat of red oxide primer and one coats of anticorrosive black bituminous paint incl dismantling mild steel work of any description not otherwise specially provided for complete all as specified and directed by Engineer in Charge.

Material and Labour for applying one Coat of synthetic enamel paint to old steel surfaces of any description, including preparation of surfaces for area over 10 cm in width or girth, not otherwise described complete all as specified and as directed by Engineer in Charge.

Material and Labour for preparation of plastered or unplastered surfaces of wall and applying Two coats of cement based paint of approved tint complete all as specified and as directed by Engineer in Charge.

Material and labour for PCC 1:2:4 Type-B2 (using 40mm graded stone aggregate), 75mm thick as in subbase complete all as specified and directed by Engineer in Charge.

Material & Labour for Machine pressed precast concrete interlocking paver block with rubber moulded any shape and size confirming to IS 15658-2006 of 80 mm thickness, M-40 Grade with grey cement and pigments of approved design & pattern as approved by GE, complete including dismantling of old stone slab/ paver block with and including 50mm thick sand cushioning complete all as specified and as directed by Engr-in-Charge.

Supply and fix Hot dipped galvanized chain link fencing with zinc coating, nominal height- 2400 mm, pitch- 50mm and wire dia 3.15 mm (Min weight of chain link shall be 2.55 kg/Sqm) complete all as specified and as directed by Engineer in Charge.

Material and Labour for TMT bars 10mm dia and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends or as in horizontal bar for fixing in fencing and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete for support of chain link fencing including dismantling /taking down old unserviceable one complete all as specified and as directed by Engineer in Charge.

Supply of calcium based high strength chlorine for water disinfectant as granular from in factory sealed HDPE container(40 to 50 kg each) having chlorine concentration level not less than 65% complete all as specified and as directed by Engineer in Charge. Make:sreerayalseema hi-strength Hypo Ltd/Altoch GP as approved by GE.

Dismantling, taking out complete pump set, of any type, capacity 5 HP to 15 HP of different models from foundation including dismantling suction and delivery pipe connection from pump, transporting to workshop and back repair/overhauling complete and reassembling and fixng to original position after repair/overhauling with nuts, bolts, washers, pipe connection complete including testing, commissioning complete all as specified and as directed by Engineer in Charge. Note:- (i) Spares required for the repairs shall be measured and paid separately under relevant items of this schedule. (ii) Rate quoted by the contractor is inclusive of minor items such as nuts, bolts, gaskets, washers, screws, consumbales like grease etc.

Supply Only Ball Bearing (DE) compatible with the existing make and specifications complete all as specified and as directed by Engineer in Charge.

Supply Only Ball Bearing (NDE) compatible with the existing make and specifications complete all as specified and as directed by Engineer in Charge.

Supply Only Impeller compatible with the existing make and specifications complete all as specified and as directed by Engineer in Charge.

Supply Only Pump shaft compatible with the existing make and specifications complete all as specified and as directed by Engineer in Charge.

Supply Only Lantern Ring compatible with the existing make and specifications complete all as specified and as directed by Engineer in Charge.

Supply Only Mechanical Seal compatible with the existing make and specifications complete all as specified and as directed by Engineer in Charge.

Supply only Water deflector compatible with the existing make and specifications complete all as specified and as directed by Engineer in Charge.

Supply only Sleeve compatible with the existing make and specifications complete all as specified and as directed by Engineer in Charge.

Supply only Key Impeller compatible with the existing make and specifications complete all as specified and as directed by Engineer in Charge.

Supply only Gland Packing compatible with the existing make and specifications complete all as specified and as directed by Engineer in Charge.

Dismantling, taking out induction motor 5 HP to 15 HP from foundation by removing electric connection, coupling carefully and transporting to workshop and back for repair/rewinding complete and reassemble and fixing to original position after repair/overhauling with nuts, bolts, washers, pipe connection and cable connection complete including testing, commisiioning,proper alignment complete all as specified and as directed by Engineer in Charge.

Material and Labour for complete rewinding of motor of any type after cutting, taking out old damaged winding from stator core, cleaning of slots, providing proper insulating material/lock strip in the slots, rewinding with existing size of super enamelled copper wireincluding required binding, bonding, insulation, varnishing and drying and proepr testing after rewinding for the motor of size 5 HP to 7.5 HP complete all as specified and as directed by Engineer in Charge.

Material and Labour for complete rewinding of motor of any type after cutting, taking out old damaged winding from stator core, cleaning of slots, providing proper insulating material/lock strip in the slots, rewinding with existing size of super enamelled copper wireincluding required binding, bonding, insulation, varnishing and drying and proepr testing after rewinding for the motor of size 10 HP to 15 HP complete all as specified and as directed by Engineer in Charge.

Repair / Maintenance / Overhauling in situ of pump starter panel by dismantling, taking out old damaged panel wiring, replacement of contactor, relays, timer, push button, single phase preventor, voltmeter, ammeter, LED indicator and other miscellaneous items as required and testing after completion of work complete all as specified and as directed by Engineer in Charge.

Supply & fixing star delta starter suitable for electric motor of capacity 10 to 15 HP complete all as specified and and directed by Engineer in Charge.

Supply only AC Contactor, 3 Pole, 3 Phase, 415 V, AC, 50 Hz, Type ML-2 to ML-5 complete all as specified and as directed by Engineer in Charge. Make-L&T or from List of make as approved by GE.

Supply only AC Side mounting add on aux contact block for contactor complete all as specified and as directed by Engineer in Charge. Make-L&T or from List of make as approved by GE.

Supply only AC front add on aux contact block for contactor complete all as specified and as directed by Engineer in Charge. Make-L&T or from List of make as approved by GE.

Supply only thermal overload relays, relay range 9 Amp to 15 Amp as per existing complete all as specified and as directed by Engineer in Charge. Make-L&T or from List of make as approved by GE.

Supply only Electronic timer, 3 -30 sec, 415 Volts, complete all as specified and as directed by Engineer in Charge. Make-L&T or from List of make as approved by GE.

Supply only motor protection relay, O/L range 1.2 Amps complete all as specified and as directed by Engineer in Charge. Make-L&T or from List of make as approved by GE.

Supply only Single Phase preventor relay complete all as specified and as directed by Engineer in Charge. Make-L&T or from List of make as approved by GE.

Supply only LED indicator,R-Y-B complete all as specified and as directed by Engineer in Charge. Make-L&T or from List of make as approved by GE.

Supply only Starter push button, Red/Green complete all as specified and as directed by Engineer in Charge. Make-L&T or from List of make as approved by GE.

Supply only Voltmeter, 440 Volts complete all as specified and as directed by Engineer in Charge. Make-L&T or from List of make as approved by GE

Supply only Ammeter, 440 Volts complete all as specified and as directed by Engineer in Charge. Make-L&T or from List of make as approved by GE

Supply and Fix in replacement Submerssible Flat copper cable conductor, 3 Core, 10 Sqmm, 1100 Volts, complete all as specified and as directed by Engineer in Charge.

Repair and Maintenance of unserviceable submersible pump of 15 HP capacity by lifting from UG Sump and dismantling and strip opening of 3 phase, 415 volts, AC Submersible pump set, transposrting pumpset to workshop for repair including replacement of unserviceable parts of pump such as GM impeller, neck ring, bowl assembly, bushes, coupling, lock, sand cap, CI intermediate bowl, SS pump shaft including testing at site on full load capacity complete all as specified nad as directed by Engineer in Charge. Note:- (i) Defective parts such as pump shaft, impeller, neck ring, coupling, lock, gun metal bushes, sand cap etc will be measured and paid separately under relevant itemof this schedule. (ii) Rate quoted by the Contractor is deemed to be inclusive of rate for repair, servicing, complete checking, machine work required, cutting, grinding, polishing, transporting to workshop and back to site, removing and refixing of GI pipe complete as required for the job.

Supply and Fix Pump shaft stainless steel sleeve suitable for 15 HP submersible pump complete all as specified and as directed by Engineer in Charge.

Supply and Fix Impeller Bronze/Gun Metal suitable for 15 HP submersible pump complete all as specified and as directed by Engineer in Charge.

Supply and Fix Neck Ring, Gun metal suitable for 15 HP submersible pump complete all as specified and as directed by Engineer in Charge.

Supply and Fix Gun Metal Bowl Bushes suitable for 15 HP submersible pump complete all as specified and as directed by Engineer in Charge.

Supply and Fix Cast Iron suction/discharge case bowl suitable for 15 HP submersible pump complete all as specified and as directed by Engineer in Charge.

Supply and Fix Sand Cap suitable for 15 HP submersible pump complete all as specified and as directed by Engineer in Charge.

Supply and Fix Cast Iron intermediate bowl suitable for 15 HP submersible pump complete all as specified and as directed by Engineer in Charge.

Repair/Maintenance of unserviceable submerssible motor of capacity 15 HP, 3 Phase, 415 Volts by Lifting from UG sump, transportation to workshop, dismantling and strip opening re-winding with PVC insulated superior quality water proof copper winding wire of suitable size/ gauge and same number of turns including replacement of insulating materials with and including new submerssible cable of suitable size for connection from to outside upto length of 1.5 meter length and reassembling including testing at site on full load capacity complete all as specified and as directed by Engineer in Charge. Note:- (i) The defectiveparts suchas thurst plate/bearing/sleeve/pad/bush end etc shall be measured and paid separately under relevant itemsof this schedule. (ii) Rate quoted by Contractor is deemed to be inclusive of cost towards repair/servicing/ complete checking/ machine work required in job, cutting, grinding etc complete including trasportation to workshop and back to site complete all as specified and as directed.

Supply only thurst plate suitable for submersible motor of capacity 15 HP complete all as specified and as directed by Engineer in Charge.

Supply only thurst pad suitable for submersible motor of capacity 15 HP complete all as specified and as directed by Engineer in Charge.

Supply only Bearing suitable for submersible motor of capacity 15 HP complete all as specified and as directed by Engineer in Charge.

Supply only Bush suitable for submersible motor of capacity 15 HP complete all as specified and as directed by Engineer in Charge.

Material and Labour for cleaning of MES water supply installation/ campus at MG Road, other than considered in outsourcing contract by surface dressing or trimming of natural ground to remove small unequalities n exc.15cm deep (including removing vegetation/shrubs/brushwood/under growth ) cleaning of drains & carrying away the rubbish to a distance of n.exc 50MTR away complete at an interval of every 30 days for the following installation: (Approx Area 300 Sqm)

All as per item no 127 above but at SFQ (approx area 700 sqm)

All as per item no 127 above but at CAFVD (approx area 1200 sqm)

All as per item no 127above but at Sarvatra Vihar (approx area 1100 sqm)

All as per item no 127 above but at Church Road (approx area 120 sqm)

All as per item no 127 above but at Nirikshan Vihar (approx area 1450 sqm)

All as per item no 127 above but at KKD Line (approx area 2000 sqm)

All as per item no 127 above but at EH Road (approx area 2500 sqm)

All as per item no 127 above but at EME Line (approx area 600 sqm)

Supply and Fix Glow Sign Board of size 12'3" x 3'2" x 1'1" at various pump house holding at 3.5 meter height, made of front sided back-lit flex board 3mm thick, including providing and fixing structural steel frame made out of medium duty 32mm square pipe section, red oxide primer with two coat of synthetic enamel painting, providing and fixing 26 gauge powder coated MS sheet top, bottom, side and back, echo solvent printed, 20 W with all fittings including electric cable and conduit provision complete all as specified and as directed by Engineer in Charge.

Material and Labour for Cleaning of RCC OH reservior 50000 gallon cap internally by brushing walls,floors and through washing and removing all dirt ,muds etc through drain out pipe complete at interval of 4 month complete all as specified and directed by Engineer in Charge. (Note: cleaning of one OHT will be considered as one job).

Material and Labour for Cleaning of RCC OH reservior 20000 gallon cap internally by brushing walls,floors and through washing and removing all dirt ,muds etc through drain out pipe complete at interval of 4 month complete all as specified and directed by Engineer in Charge. (Note: cleaning of one OHT will be considered as one job).

Material and Labour for Cleaning of RCC OH reservior 15000 gallon cap internally by brushing walls,floors and through washing and removing all dirt ,muds etc through drain out pipe complete at interval of 4 month complete all as specified and directed by Engineer in Charge. (Note: cleaning of one OHT will be considered as one job).

Material and Labour for Cleaning of RCC semi UG clear water sump 100000 gallon cap internally by brushing walls,floors and through washing and removing all dirt ,muds etc through drain out pipe complete at interval of 4 month complete all as specified and directed by Engineer in Charge. (Note: cleaning of one sump will be considered as one job).

Material and Labour for Cleaning of RCC semi UG clear water sump 20000 gallon cap internally by brushing walls,floors and through washing and removing all dirt ,muds etc through drain out pipe complete at interval of 4 month complete all as specified and directed by Engineer in Charge. (Note: cleaning of one sump will be considered as one job).

Material and Labour for Cleaning of RCC semi UG clear water sump 10000 gallon cap internally by brushing walls,floors and through washing and removing all dirt ,muds etc through drain out pipe complete at interval of 4 month complete all as specified and directed by Engineer in Charge. (Note: cleaning of one sump will be considered as one job).

Material and Labour for Cleaning of RCC semi UG clear water sump 5000 gallon cap internally by brushing walls,floors and through washing and removing all dirt ,muds etc through drain out pipe complete at interval of 4 month complete all as specified and directed by Engineer in Charge. (Note: cleaning of one sump will be considered as one job).

Material and Labour for Cleaning of RCC semi UG clear water sump 5000 gallon cap at RSAMI internally by brushing walls,floors and through washing and removing all dirt ,muds etc through drain out pipe complete at interval of 4 month complete all as specified and directed by Engineer in Charge. (Note: cleaning of one sump will be considered as one job).

M&L for construction of masonry valve pit chamber of internal dimension 1500mmX1000mmX800mm with 100 mm thick PCC 1:4:8 type D-2 as in foundation over 150mm thick hard core ,20cm thick solid block masonry with solid blocks of grade c-5 built in cement mortar 1:4 plaster 15mm thick in cement and sand mortar 1:4 to interna surfaces and external surfaces up to 15cm below ground level and top of floor ,finished even and smooth without using extra cement 3.15mm thick MS sheet cover including 50mmX50mmX6mm thick MS angle frame fixed in PCC 1:2:4 Type B1 coping with 4 NOS 25x6mm Fl 15mm long hold fasts,handle ,hinges with locking arrangement ,applying one coat of red oxide primer and two coats of synthetic enamel paint to all steel surfaces and earth work in any type of soil ,demolition of valve pit including disposal of surplus soil to a distance not exceeding 50m complete all as specified and as directed by Engineer in Charge.

ONKAR ELECTRIC AND GENERAL STORE

SKS Electricals

GRACE CONSTRUCTIONS