Establishment of Odisha State Sericulture Research and Training Institute at Plot No 14/A, Industrial Estate, Mancheswar, Bhubaneswar

Amount

Earth work in ordinary soil with initial lead and lift including dressing of sides and leveling the bed up to the required depth and depositing the excavated materials away from the work site with all leads and lifts, including shoring, shuttering and dewatering (if required) with cost of labour, hire & running charges of water pumps sundries & T&P required for the work complete as directed by the Engineer-in-charge.

Earth work in Stoney earth soil with initial lead and lift including dressing of sides and leveling the bed up to the required depth and depositing the excavated materials away from the work site with all leads and lifts, including shoring, shuttering and dewatering (if required) with cost of labour, hire & running charges of water pumps sundries & T&P required for the work complete as directed by the Engineer-in-charge.

From 1.50m to 3.00m lift

Excavation of founation in laterite rock or any hard rock (other than granite or disintigrated rock) removed by chiselling including dressing of sides and leveling the bed up to the required depth and depositing the excavated materials away from the work site with all leads and lifts, including shoring, shuttering and dewatering (if required) with cost of labour, hire & running charges of water pumps sundries & T&P required for the work complete as directed by the Engineer-in-charge.

Supplying and filling in foundation trenches and plinth, ditches with sand well-watered and rammed in layers not exceeding 23 cm. in depth with all lead and lift including cost, conveyance, loading, unloading, royalties, cost of all labour, sundries, T&P required for the work etc. complete in all respect as per specification and direction of Engineer-in-charge. (Measurement will be taken on finished compacted section only).

Providing and lying plain cement concrete of proportion (1:3:6) in foundation and floors using Portland Slag Cement(PSC) with 4 cm. Size black hard crusher broken granite stone metal and screened and washed sharp sand for mortar of approved quality from approved quarry, washed and cleaned including hoisting, lowering, laying concrete, ramming, watering and curing etc. complete to required levels laid in layers not exceeding 15 cm thick in each layer including cost, conveyance, loading, unloading, royalties, cost all labours, sundries, T & P required for the work including shoring, shuttering and dewatering if required including hire & running charges of water pump complete as per specification and direction of Engineer-in-charge.

Cement concrete (1:2:4) with 12mm size hard broken granite chips and screened and washed sharp sand for mortar of approved quality from approved quarry, washed and cleaned including hoisting, lowering, laying concrete, ramming, watering and curing etc. complete to required levels laid in layers not exceeding 5 cm thick in each layer including cost, conveyance, loading, unloading, royalties, cost all labours, sundries, T & P required for the work including shoring, shuttering and dewatering if required including hire & running charges of water pump complete as per specification and direction of Engineer-in-charge.

Providing, lifting, hoisting and laying Reinforced cement concrete of M-25 grade as per approved designs and drawings having a minimum compressive strength (in work test) 250 Each Kg. / Square cm. in 15 cm. cubes at 28 days after mixing and test conducted in accordance with I.S. 516 using 12 mm. to 20 mm. size black hard crushed broken granite stone chips and screened and washed sharp sand for mortar of approved quality from approved quarry, washed and cleaned ( 20mm. size chips Each Not to exceeds 25 % ) to be mixed in concrete mixture with Portland slag cement (PSC) including hoisting, lowering, laying and compaction concrete by using vibrators, watering and curing for 28 days, and finishing the exposed surface smooth providing grooves or beads wherever necessary including cost, conveyance, loading, unloading, royalties and cost of all labours, sundries, T & P required of the work etc. complete in all respect as per specification and direction of Engineer-in-charge. But excluding cost and conveyance of M.S. rods or Tor steel and binding wires and labour charges for straightening, cutting, bending etc. of M.S. rods or tor steel tying the grills and placing in proper position.

Column base

Columns Ground floor

Columns First Floor

Columns Second Floor

RCC wall

Plinth Beam

Lintel Beam Ground floor

Lintel Beam First floor

Lintel Beam Second floor

Roof Beam Ground floor

Roof Beam First floor

Roof Beam Second floor

Roof Slab Ground floor

Roof Slab First floor

Roof Slab Second floor

Chhajja Ground floor

Chhajja First Floor

Staircase Ground floor

Staircase First floor

Shelves Ground floor

Shelves First floor

Providing, lifting, hoisting and laying Reinforced cement concrete of M-20 grade as per approved designs and drawings having a minimum compressive strength (in work test) 200 Each Kg. / Square cm. in 15 cm. cubes at 28 days after mixing and test conducted in accordance with I.S. 516 using 12 mm. to 20 mm. size black hard crushed broken granite stone chips and screened and washed sharp sand for mortar of approved quality from approved quarry, washed and cleaned ( 20mm. size chips Each Not to exceeds 25 % ) to be mixed in concrete mixture with Portland slag cement (PSC) including hoisting, lowering, laying and compaction concrete by using vibrators, watering and curing for 28 days, and finishing the exposed surface smooth providing grooves or beads wherever necessary including cost, conveyance, loading, unloading, royalties and cost of all labours, sundries, T & P required of the work etc. complete in all respect as per specification and direction of Engineer-in-charge. But excluding cost and conveyance of M.S. rods or Tor steel and binding wires and labour charges for straightening, cutting, bending etc. of M.S. rods or tor steel tying the grills and placing in proper position.

RCC Base

RCC wall

Providing all materials, labour, T&P for laying R.C.C. M-25 having minimum cube strength of 250 Kg/cm2 at 28 days confirming to IS 456/79 & IS 3370 for water tank at all location & height using graded H.G stone aggregate of 20mm & down size including machine mixing, lifting, conveying, placing in position mechanical consolidation curing, dewatering (if necessary) & testing the concrete for water tightness, rectification of defects if any etc., complete all as per specification & drawing including cost of all material, labour, machinery hire charges, T&P and all testing charges (but excluding cost of reinforcement bars, binding wirings, centering & shuttering etc.) as per the specification & direction of Engineer-in-charge.

Providing & making strong, rigid, levelled & plumbed centering & shuttering to required shape, allignment & size for all kinds of RCC works with wooden or steel centering materials with all bracing, ties, anchorage & supports including provision for necessary holes for P.H. works including cost of nails etc. complete & dismantling & removing the same after required interval from the date of casting including cost of all materials with transportation, hire charges, taxes, loading, unloading all labour, T&P, sundries etc. complete as per the specification & direction of the Engineer-in-charge.

Providing, fixing and placing of Tor steel (HYSD) Fe-500 IS 1786-2008 for RCC work in all floors of required diameter of approved quality with straightening, Cutting, bending, binding welding or jointing if necessary, bending, binding, tying the grills as required for R.C.C. works, providing fan hooks where necessary and hoisting, lowering and placing in proper position according to approved designs and drawings including cost, conveyance, loading, unloading, taxes of M.S. rods or Tor steel and binding wires of 18 to 20 gauge required for the work and cost of all labour, sundries, T & P and scaffolding complete in all respect as directed by the Engineer-in-Charge ( payment will be made according to the actual weight of M.S rod /Tor steel consumed in the work and Each Each No separate payment will be made towards weight of binding wires which is to be borne by the contractor at his own cost.

Ground floor

First floor

Head room

Providing Fly Ash Brick masonry using fly ash bricks of size 25 cm. x 12 cm. x 8 cm. having crushing strength Each Not less than 75 Each Kg. Per. Sqr. Cm. in cement mortar of mix(1:6) with ordinary Portland slag cement(PSC) and screened & washed sand for mortar in foundation, plinth including splays cutting, circular moulding, corbelling, chamfering and similar such type of works, watering and curing etc. including cost, conveyance, loading, unloading, royalties, cost of all labour, scaffolding, sundries, T&P required for the works etc. complete in all respect as per specification and direction of Engineer-in-charge.

Providing Fly Ash Brick masonry using fly ash bricks of size 25 cm. x 12 cm. x 8 cm. having crushing strength Each Not less than 75 Each Kg. Per. Sqr. Cm. in cement mortar of mix(1:6) with ordinary Portland slag cement(PSC) and screened & washed sand for mortar in superstructure including splays cutting, circular moulding, corbelling, chamfering and similar such type of works, watering and curing etc. including cost, conveyance, loading, unloading, royalties, cost of all labour, scaffolding, sundries, T&P required for the works etc. complete in all respect as per specification and direction of Engineer-in-charge.

Ground Floor

First Floor

Second Floor

12mm thick cement plaster (1:6) on brick work with Portland slag cement (PSC) and with screened and washed sharp sand for mortar and finished smooth to the rough surface of brick masonry walls after racking out joints including watering and curing rounding of corners etc. complete with cost, conveyance, loading, unloading, royalties, cost of all labour, T&P, sundries and scaffolding required for the work etc. with providing grooves as directed by the Engineer-in-Charge.

Ground Floor

First Floor

Second Floor

Providing 16mm thick cement plaster (inside )in all floors at all height with cement mortar of mix (1:6) with Portland slag cement (PSC) and with screened and washed sharp sand for mortar and finished smooth to the rough surface of brick masonry walls after racking out joints including watering and curing rounding of corners etc. complete with cost, conveyance, loading, unloading, royalties, cost of all labour, T&P, sundries and scaffolding required for the work etc. with providing grooves as directed by the Engineer-in-Charge.

Ground Floor

First Floor

Second Floor

Providing 6 mm. thick cement plaster with cement mortar of mix (1:4) in all floors at all height with screened and washed sharp sand for mortar to ceiling plaster of roof slab, staircase, landings, chajja and shelves etc. including roughening, scraping, chiseling, cleaning to all R.C.C surface including cost, conveyance, loading, unloading, royalties, cost of all labour, sundries, T&P , scaffolding, watering and curing etc. complete in all respect as per specification and direction of Engineer-in-charge.

Ground Floor

First Floor

Second Floor

Providing plaster with cement mortar including cement punning where required finished smooth over brick work with waterproofing cement based compound of approved quality including finishing smooth to proper slope and plane including cost of all materials with conveyance, royalty, taxes, watering, scaffolding and curing, all labour and T&P etc. complete as per specification & direction of EIC. 12mm thick C.P. 1:3 with punning

Providing plaster with cement mortar including cement punning & bitumen painting where required finished smooth over brick work with waterproofing cement based compound of approved quality including finishing smooth to proper slope and plane including cost of all materials with conveyance, royalty, taxes, watering, scaffolding and curing, all labour and T&P etc. complete as per specification & direction of EIC. 12mm thick C.P. 1:3 with punning

Wall painting two coats with 100% Acrylic emulsion paint (1st quality) exterior grade of approved make & shade manufactured by reputed manufacturer like NEROLAC / ASIAN / BERGER / DULOX or equivalent to make an even finished surface over a coat of primer with water bond cement primer in all heights with all scaffolding and staging charges including cost, conveyance, taxes of all materials, cost of all labours, T & P, sundries etc. as required for the work complete.

Ground Floor

First Floor

Second Floor

Wall painting two coats with 100% Acrylic emulsion paint (1st quality) interior grade of approved make & shade manufactured by reputed manufacturer like NEROLAC / ASIAN / BERGER / DULOX or equivalent to make an even finished surface over a coat of primer with water bond cement primer in all heights with all scaffolding and staging charges including cost, conveyance, taxes of all materials, cost of all labours, T & P, sundries etc. as required for the work complete.

Ground floor

First Floor

Second Floor

Supplying, fitting and fixing well dressed and well seasoned sal wood choukaths framed and fixed including two coats coats of coaltaring to wall and lintel side faces of choukaths including cost of coaltar and labour for coaltaring and fixing required nos. of W.I. clamps to the choukaths with approved qualities of screws including cost, conveyance, loading required for the work etc. complete in all respect with cost, conveyance, royalties, loading, unloading and cost of all labour, T&P, sundries, scaffolding etc. required for the work complete in all respect as per specification and direction of Engineer in Charge

Supplying fitting and fixing in position flush door shutter of 32mm thick BWR board with 1mm Laminate of approved quality and as per drawing & design with all necessary brass/SS fittings, door closer(if required) motrice lock(if required), tower bolt, handle on both side including cost of all materials, labour, , transportation, loading & unloading etc. complete as per specification and direction of Engineer –in-charge.

Painting 2 coats with any enamel paint on new wood work over one coat of approved primer including cost of paint in all heights with all scaffolding and staging charges including cost, conveyance, taxes of all materials, cost of all labour, etc. complete as per specification and direction of Engineer-in-Charge.

Supplying, fitting and fixing of M.S. grill in windows including screws as may be required and also including tying, welding, finishing to the welded surfaces, as per approved drawing etc with cost, conveyance, labour, T&P etc. required for the complete in all respect.

Providing and fixing factory made uPVC white colour sliding glazed window upto 1.50 m in height dimension comprising of uPVC multi-chambered frame with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes, wire mesh and silicon sealent shall be paid separately) Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.

Two track two panels sliding window made of (small series) frame 52 x 44 mm &sash 32 x 60 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension. (Area of window upto 1.75 sqm)

Three track three panels sliding window with fly proof SS wire mesh (Two nos. glazed & one no. wire mesh panels) made of (small series) frame 92 x 44 mm & sash 32 x 60 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area of window upto 1.75 sqm).

Painting 2 coats with any enamel paint on new iron work including cost of paint in all heights with all scaffolding and staging charges including cost, conveyance, taxes of all materials, cost of all labour, etc. complete as per specification and direction of Engineer-in-Charge.

Providing and fixing 12 mm thick frameless toughened glass partition with machine polished edges, including providing and fixing of top & bottom pivot , spring and other hardware of make DORMA, HAFELE,DORESET or equivalent as approved by the Consultant with all arrangements and making necessary holes if required etc. For fixing the required door and treating the joint with necessary glue and silicon all complete, including all cost of labour, material, conveyance, T&P etc.as per direction of the Consultant.

Extra for 600mm 35mm dia SS Handle of Godrej or of equivalent brand.

Extra for SS SS Glass door lock serie of Godrej or of equivalent brand.

Floor spring combo without lock of Godrej code no 5745 or of equivalent brand.

Providing premium grade vitrified tile flooring 600mm X 600mm of approved quality, colour and size in floors, treads on steps and landings in all floors at all height on 25mm thick bed of cement mortar of mix (1:3) laid in proper slope and gradient with screened and washed sharp sand for mortar and grouted with neat white cement slurry joining the tile with neat white cement slurry mixed with required quantities of pigments of approved marks to match the shades of the granite tile if required watering and curing for 21 days, including cost, conveyance, loading, unloading, royalties, cost of all labour, sundries, T&P required for the work complete in all respect as per specification and direction of Engineer-in-charge.

Ground floor

First floor

Providing premium grade vitrified tile in risers and dadoos 600mm X 600mm of approved quality, colour and size in floors, in all floors at all height on 12mm thick bed of cement mortar of mix (1:3) laid in proper line with screened and washed sharp sand for mortar and grouted with neat white cement slurry joining the tile with neat white cement slurry mixed with required quantities of pigments of approved marks to match the shades of the granite tile if required watering and curing for 21 days, including cost, conveyance, loading, unloading, royalties, cost of all labour, sundries, T&P required for the work complete in all respect as per specification and direction of Engineer-in-charge.

Ground floor

First floor

Providing Ceramic Floor tiles of 300mm X 450mm in floors of approved quality, colour and size in floors, treads on steps and landings in all floors at all height on 25mm thick bed of cement mortar of mix (1:3) laid in proper slope and gradient with screened and washed sharp sand for mortar and grouted with neat white cement slurry joining the tile with neat white cement slurry mixed with required quantities of pigments of approved marks to match the shades of the granite tile if required watering and curing for 21 days, including cost, conveyance, loading, unloading, royalties, cost of all labour, sundries, T&P required for the work complete in all respect as per specification and direction of Engineer-in-charge.

Ground floor

First floor

Providing 20cmx30cm/20cmx20cm size special plain/printed series ceramic glazed wall tiles of premium grade having thickness 6.5mm to 6.7mm conforming to IS 13753 of approved make & shade in Dadoes over 12mm thick cement plaster 1:3 (1 Cement: 3 Coarse sand) finished with modular pointing in white cement & pigment to match the shade of the tiles including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour curing sundries and T & P etc. required for the work etc. complete as per specification and direction of Engineer-in-charge

Ground floor

First floor

Providing 20mm thick granite tile flooring (above 0.4 sqm .) of approved quality, colour and size in floors, treads on steps and landings in all floors at all height on 25mm thick bed of cement mortar of mix (1:1) laid in proper slope and gradient with screened and washed sharp sand for mortar and grouted with neat white cement slurry joining the tile with neat white cement slurry mixed with required quantities of pigments of approved marks to match the shades of the granite tile if required watering and curing for 21 days, including cost, conveyance, loading, unloading, royalties, cost of all labour, sundries, T&P required for the work complete in all respect as per specification and direction of Engineer-in-charge.

Ground floor

First floor

Extra labour for laying tile flooring on stair treads not exceeding 30cm. in width including cost of forming, nosing etc.

Ground floor

First floor

Providing 20mm thick granite tile in dadoos and skirting (above 0.4 sqm .) of approved quality, colour and size in floors, in all floors at all height on 12mm thick bed of cement mortar of mix (1:3) laid in proper slope and gradient with screened and washed sharp sand for mortar and grouted with neat white cement slurry joining the tile with neat white cement slurry mixed with required quantities of pigments of approved marks to match the shades of the granite tile if required watering and curing for 21 days, including cost, conveyance, loading, unloading, royalties, cost of all labour, sundries, T&P required for the work complete in all respect as per specification and direction of Engineer-in-charge.

Ground floor

First floor

Supplying, fitting and fixing of Stainless steel of 304 grade in hand railing using 50mm dia of 2mm thick circular pipe with Balustrade of size 32mm x 32mm x 2mm @ 0.90mtr. C/C and stainless square pipe bracing of size 32mm x 32mm x 2mm in 3 rows in stair case as per approved design and specification, buffing, polishing etc with cost, conveyance, taxes of all materials, labour, T&P etc. required for the complete in all respect.

2.5 cm thick grading concrete (1:2:2) on roof slab with 6mm size hard granite chips. On new work, with screened and washed sharp sand for mortar of approved quality from approved quarry, washed and cleaned including hoisting, lowering, laying concrete, ramming, watering and curing etc. complete to required levels laid in layers not exceeding 2.5 cm thick in each layer including cost, conveyance, loading, unloading, royalties, cost all labours, sundries, T & P required for the work including shoring, shuttering and dewatering if required including hire & running charges of water pump complete as per specification and direction of Engineer-in-charge.

Providing and fixing M.S. Fan clamp type I or II of 16 mm dia M.S. bar, bent to shape with hooked ends in R.C.C. slabs or beams during laying, including painting the exposed portion of loop, all as per standard design complete as required. DSR Civil-2014, Item no. 10.17

Providing and fixing circular/ Hexagonal GI box for ceiling fan clamp, of internal dia 140 mm, 73 mm height, top lid of 1.5 mm thick GI sheet with its top surface hacked for proper bonding, top lid shall be screwed into the GI box by means of 3.3 mm dia round headed screws, one lock at the corners, clamp shall be made of 12 mm dia M.S. bar bent to shape as per standard drawing. DSR Civil-2014, Item no. 10.18

Providing and fixing of Side hung Door of approved make to be fabricated from roll formed sections made of pre-painted steel (base steel as per IS-513 of 0.6 mm thick “D” quality, galvanized as per IS-277 with zinc of 120 Gm/Sq.mtr) with paint specification being with primer of 5-7 microns and finished paint with polyster paint (Black /Pearl white/ Chocolate Brown) of 12-16 microns alongwith the alkyd backer at the back of 5-7 microns and the sizes of outer frame being of 46x52 mm and shutter being of 46 x 46 mm and lock rail and bottom rail should be of 23 x 130mm. Accessories / gaskets are to be used as per the manufacturer’s supply and specification like handle and lock of approved quality. Hinges made up of 2.5mm thick. Gasket will be made of EPDM. All corner brackets are to be made of CRCA with zinc phosphating. The sections are to be cut to length ,mitre joined with corner bracket and frames are fixed to the concrete/masonry walls by means of self expanding screws and board to be of 9mm pre laminated with all taxes complete.

Providing & fixing Glass Fibre Reinforced concrete (GFRC) Jally of minimum thickness of 25mm & Minimum border thickness of 50mm above the Boundary wall as per manufacturer's specification along with fixing accessories & pink sand stone finished texture etc. all complete as per directions of Engineer-in-charge.

Fixing M-30 Grade 60mm Grass Paver block tile in floors treads or steps and landing over sand etc. complete laid in proper slope and gradient with screened and washed sharp sand for mortar and grouted with neat white cement slurry joining the tile with neat white cement slurry mixed with required quantities of pigments of approved marks to match the shades of the granite tile if required watering and curing for 21 days, including cost, conveyance, loading, unloading, royalties, cost of all labour, sundries, T&P required for the work complete in all respect as per specification and direction of Engineer-in-charge.

Providing, fitting & fixing of following sizes of precast factory made RCC man hole cover with frame including locking arrangement. The cost inclusive of all labour, T&P, taxes, transportation etc. all complete as per specification & direction of EIC. 500mm dia clear opening RCC man hole cover with frame.(medium duty)

Providing, fitting & fixing of Poly Propylene man hole steps of approved quality & size in two parallel line of 300mm spacing in vertical walls with centre to centre 375mm (staggered).The cost inclusive of all labour, T&P, taxes, transportation etc. all complete as per specification & direction of EIC.

Providing, fitting & fixing of 110 diax1.80m long UPVC SWR pipe (Type-A) of approved make confirming to IS-13592/1992 with Vent Cowl including construction of cement concrete pedestal (1:2:4) of size 0.30mx0.30mx0.45m ht. The cost inclusive of all labour, T&P, taxes, transportation etc. all complete as per specification & direction of EIC.

Providing, fitting & fixing of 150mm dia S.W. Tee. The cost inclusive of all labour, T&P, taxes, transportation etc. all complete as per specification & direction of EIC.

Providing all labour, T&P for benching & making Channel for inlet & outlet chamber.

Providing all material, labour & T&P for filling the both inner & outer surface of soak pit with 40mm size hard granite hand broken metal etc. complete including lead & lift cost & conveyance, loading, unloading etc. complete as per specification & direction of EIC.

INTERNAL POINT WIRING. Recessed wiring to light point / first light of group control/ call bell point/ exhaust fan point /wall fan point with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked in 20 mm dia non-metalic PVC conduit with 6 Amp, 250 V clip in type switch ISI marked and ceiling rose ISI marked mounted on G.I modular box with face plate & cover of suitable size , with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection as per direction of Engineer in Charge.

Recessed wiring to secondary light point looped from primary light point with 1.5sqmm FR PVC insulated single core multistrand copper conductor of ISI marked with 20mm dia non-metallic PVC conduit with 1.5sqmm FR PVC insulated single core multistrand copper conductor for running earth including 3 plate ISI marked Ceiling rose with all accessories & connection as per direction of Engineer in charge. Average Length: 3 mtr

Recessed wiring to ceiling fan point with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked in 20 mm dia non-metalic PVC conduit with 6Amp, 250 V clip in type switch ISI marked and stepped modular Regulator ISI marked mounted on G.I modular box with face plate & cover of suitable size , with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection as per direction of Engineer in Charge.

Recessed wiring for 5 / 6 amp socket outlet with 6Amp, 250 V clip in type modular switch ISI marked mounted on G.I moular box with face plate & cover of suitable size including all accesories and connection on same switch board as per direction of Engineer in Charge.

Recessed wiring for 5 / 6 amp socket outlet with 2 x 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked in 20 mm dia non-metalic PVC conduit with 6Amp, 250 V clip in type switch ISI marked mounted on G.I moular box with face plate & cover of suitable size , with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection on separate board as per direction of Engineer in Charge.

Recessed wiring for 2 x 6 amp socket outlet controlled by 2 nos 6Amp, 250 V clip in type switch ISI marked mounted on single G.I moular box with face plate & cover of suitable size including all accesories and connection on separate board as per direction of Engineer in Charge.

Recessed wiring for 6 pin 16 amp socket outlet with 5Amp, 250 V clip in type switch ISI marked mounted on G.I moular box with face plate & cover of suitable size , with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection as per direction of Engineer in Charge.

Recessed wiring for A.C socket outlet with 20 amp SPN, industrial type socket outlet, with plug top and metal chained cover in sheet steel enclosure indusrial socket ,20A SP MCB including all accesories and connection as per direction of Engineer in Charge.

SUBMAIN & CIRCUIT WIRING. Recessed wiring to submain in 4 x 16sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-694/1990 in 50 mm dia non-metalic heavy duty PVC conduit along with 2 x 10 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire as equired.(For POWER, COMP & AC DB)

Recessed wiring to submain in 4 x 10 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-694/1990 in 40 mm dia non-metalic heavy duty PVC conduit 1.6 mm thick along with 2 x 6 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire as equired.(For P DB)

Recessed wiring to submain in 4 x 6sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-694/1990 in 32 mm dia non-metalic heavy duty PVC conduit 1.6 mm thick along with 2 x 4.0 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire as equired.(For L DB )

Recessed wiring to submain in 2 x 4 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-694/1990 in 20 mm dia non-metalic heavy duty PVC conduit 1.6 mm thick along with 1 x 2.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire as equired. (For AC )

Recessed wiring to submain in 2 x 2.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-694/1990 in 20 mm dia non-metalic heavy duty PVC conduit 1.6 mm thick along with 1 x 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire as equired.

Recessed wiring to submain in 2 x 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-694/1990 in 20 mm dia non-metalic heavy duty PVC conduit 1.6 mm thick along with 1 x 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire as equired.

DISTRIBUTION BOARD & PANEL. Supply and fixing of following way three pole and neutral, sheet steel, MCB distribution, 415 V on surface / recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, hinged front acrylic cover for the MCB knobs detachable gland plate, interconnections, phosphatized and powder painted including earthing etc. as required wih necessary MCB , RCCB / ISOLATORS as required.

Supply, fixing, erecting, connecting and commissioning of indoor type dust and vermin proof, sheet steel clad ready made, double door horizontal type powder coated wall mounted 4way TPN Distribution Boards suitable for 440 V, three phase, 4 wire 50 Hz AC Supply complete with bottom detachable plate for interconnections etc as below.Incommer 1 No-40A FP RCBO (100/300mA) Outgoings-6-32 A SP MCB- 12 Nos.(For P DB)

Supply, fixing, erecting, connecting and commissioning of indoor type dust and vermin proof, sheet steel clad ready made, double door horizontal type powder coated wall mounted 6way TPN Distribution Boards suitable for 440 V, three phase, 4 wire 50 Hz AC Supply complete with bottom detachable plate for interconnections etc as below.Incommer 1 No-63A FP RCBO (100/300mA) Outgoings-6-32 A SP MCB- 18 Nos.(For COM, & AC DB)

Supply, fixing, erecting, connecting and commissioning of indoor type dust and vermin proof, sheet steel clad ready made, double door horizontal type powder coated wall mounted 6way TPN Distribution Boards suitable for 440 V, three phase, 4 wire 50 Hz AC Supply complete with bottom detachable plate for interconnections etc as below.Incommer 1 No-25A FP RCBO (100/300mA) Outgoings-6-32 A SP MCB- 18 Nos.(For L DB)

Supply, fixing, erecting, connecting and commissioning of indoor type dust and vermin proof, sheet steel clad ready made, double door horizontal type powder coated wall mounted 8 way TPN Distribution Boards suitable for 440 V, three phase, 4 wire 50 Hz AC Supply complete with bottom detachable plate for interconnections etc as below.Incommer 1 No-63A FP RCBO (100/300mA) Outgoings-6-32 A SP MCB- 24 Nos.(For PDB)

CABLE . Supply & laying of one number of PVC insulated and PVC seathed / XLPE power cable of 1.1 KV grade of following sizes of cable as required.

3.5 C x 240 sq.mm Al ( Main Panel)

3.5 C x 95 sq.mm Al ( G.Floor Panel)

END TERMINATION Supplying and making end termination with brass compression gland and aluminum lugs for following size of PVC insulated and PVC sheathed / XLPE aluminum cable of 1.1 KV as required.

3.5 C x 240 sq.mm Al ( Main Panel)

3.5 C x 95 sq.mm Al ( G.Floor Panel)

PANEL Supply, installation,testing & commissioning of floor mounting front operated front access extensible type cubicle panel totally enclosed, dust and vermin proof with IP-42 /55 protection with hinged and lockabale doors.CRCA sheets including interconnections,tinned copper crimping lugs, bonding to earthand painting suitable for use at 415 V, 3phase 4 wire 50 Hz system, and to withstand a fault level of 35KA symmetrical for 1 sec at 415 V complete as per specifications, as required and as below : All switchboards shall have provision for entry of cables from the bottom as required. All live accessible parts shall be shrouded and all equipment shall be finger touch proof. The bus bars shall be insulated with heat shrinkable sleeves.SMC/DMC shrouds and busbar supports shall be used.

MAIN PANEL with 400A 4P ON LOAD CHANGE OVER SWITCH &400A 4P MCCB -1 No as incomer , 160A 4P MCCB -4 Nos , 63A 4P MCCB -2 Nos, 100A 4P MCCB -2 Nos, 32A 2P MCB -3 Nos as Outgoing with Electrolytic Copper Bus Bars with 1nos 50KA SPD Type(T1+T2) along with 1nos 32A 4P MCB.

GROUND FLOOR PANEL with 160A 4P MCCB -1 No as incomer , 63A 4P MCCB -4 Nos , 40A 4P MCB -3 Nos, 32A 4P MCB -3 Nos, 32A 2P MCB -3 Nos as Outgoing with Electrolytic Copper Bus Bars as required.

EARTHING Earthing with G.I. earth plate 600 mm x 600mm x 6 mm thick ISI marked including accessories and providing masonary with cover plate having loccking arrangement and watering pipe etc (But wih out charcoal and salt) as required.

Supplying and laying 25 mm x 6 mm G.I earth strip ISI marked at 0.5 meter below ground level as strip earth electrode including soldering etc. as required.

Supplying and laying 25 mm x 5 mm G.I earth strip ISI marked on surface or in recess for connection etc as required.

FIXTURE Supply, Installation, Testing and Commissioning of pre-wired fluorescent fiiting / compact fluorescent fitting /LED fitting of all sizes complete with all accessories and lamp etc. directly on ceiling /wall or recessed in false ceiling , including connection with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor and earthing as required.

Ceiling surface indoor type Round LED Luminaire with 12 watt LED Lamp Similar to JAQUAR Cat No. LNRO02R012SC or equivalent.

Energy efficient 9W LED Light on existing angle holder or equivalent.

Ceiling mounted indoor type TUBE LED Luminaire with LED Lamp Similar to JAQUAR Cat No.LGLZPCX020XC or equivalent.

Supply, Installation, Testing and Commissioning of ceiling fan 1200mm sweep, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq.mm FR PVC insulated single core multiatrand copper conductor etc. as required.

Supply, Installation, testing and commissioning of exhaust fan of 300 mm sweep 900 rpm in the existing opening, including making the hole to suit the size of the above fan, making good the damage complete, connection, etc as required.

Supply, Installation, testing and commissioning of wall mounting fan of 400 mm sweep on partition wall/ brick wall , making good the damage complete, connection, etc as required.CG WMSDX 120

TV & TELEPHONE Recessed wiring to television point with cable RG-6 grade, 0.7 mm solid copper conductor PE insulated shielded with fine tined copper braid and protected with FR PVC sheath in 20 mm dia non-metalic PVC conduit with clip in type modular television socket ISI marked mounted on G.I modular box with face plate & cover of suitable size , including all accesories and connection as per direction of Engineer in Charge.

Recessed wiring to telephone point with clip in type modular telephone socket (RJ 11) ISI marked mounted on G.I modular box with face plate & cover of suitable size , including all accesories and connection as per direction of Engineer in Charge.

Recessed wiring to LAN point with clip in type modular lan socket ISI marked mounted on G.I modular box with face plate & cover of suitable size , including all accesories and connection as per direction of Engineer in Charge.

Supplying and fixing of 16 / 18 SWG metal box of 200 mm x 150 mm x 60 mm deep on surface / recess with suitable size of phenolic laminated sheet cover in front including cutting the wall and making good the same in case of recessed conduit as required.

Supplying and fixing of 25mm PVC conduit along with accessories in recessed wiring including cutting the wall and making good the same in case of recessed conduit as required.

Supplying and drawing one pair, 0.5 sq.mm FR PVC insulated coper conductor, unarmoured telephone cable in existing surface / recessed PVC conduit as required.

Supplying and drawing UTP 4 pair LAN cat-6 cable in the existing surface / recessed PVC conduit as required.

SAFETY EQUIPMENTS Supply and installation of Rubber Mats 12mm thick of size 2000mm x 1000mm x 12 mm thick Electrical tested with test certificate.

Supply and fixing of fire buckets with angular fabricated stand to fix 4 buckets in each stand for Electrical fire protection as per standards of Electrical Inspectorate.

Supply and fixing of Co2 fire extinguisher with mounting clamps with pressure test certificate .

Supply and fixing of shock treatement charts duly laminated along with separate colour single line diagram laminated, to be fixed in Electrical control panel room.

Supply and fixing of first aid box with medicines complete with medicine with three years expiry date to be fixed in Electrical control panel room.

Providing all materials, labour, T&P for laying/fixing of following dia CPVC pipes S.D.R-11 as per IS-15778 with ISI mark including fixing of required size CPVC fittings like bend, Tee, elbow, offsets etc. and the same fixed on wall or floor with holder bat clamps screw in all floor or laying in trenches including excavation of earth work in all kinds of soil & backfilling the trenches as per specification & testing the joints with required water presure.The cost inclusive of all taxes,duties,transportation scaffolding etc. as per specification and direction of Engineer-in-charge. Make:ASTRAL/ASHRIVAD/AJAYA/SUPREME

20mm dia

25mm dia

32mm dia

40mm dia

50mm dia

Providing all materials, labour, T&P for laying/fixing of following dia uPVC pipes as per IS-4985 with ISI mark including fixing of required size uPVC fittings like,bend,Tee,elbow,offsets,etc. and the same fixed on wall or floor with holder bat clamps screw in all floors or laying in trenches including excavation of earth work in all kinds of soil & backfilling the trenches as per specification & testing the joints with required water presure.The cost inclusive of all taxes, duties, transportation, scaffolding etc. as per specification and direction of Engineer-in-charge. Make: ASTRAL/ASHRIVAD/AJAYA/SUPREME

50mm dia

Providing all materials, labour, T&P for fitting & fixing of following water supply fittings confirming to IS-15778 with ISI mark as per ASTM D-2846 & fixing with the pipes after cutting the pipes to required shape & size including wastage etc. of following nominal diameter, all complete including testing the joints with required water pressure.The cost inclusive of all taxes,duties,transportation scaffolding etc. all complete as per specification and direction of Engineer-in-charge. Make:ASTRAL/ASHRIVAD/AJAYA/SUPREME

25mm dia CPVC ball valve

32mm dia CPVC ball valve

40mm dia CPVC ball valve

Providing all materials labour, T&P for making grooves in bricks/stone masonary walls vertically or horizontally up to required depth and width in all floor for laying of pipes and fittings up to 50mm dia, testing the joints with required water pressure and making good the damages with cement concrete 1:2:4 with 12mm size h.g.c.b.chips and finished smooth with cement morter (1:4) to original shape including cost of materials, curing, conveyance, taxes of all materials etc. all complete as per specification & direction of EIC.

Providing all labour,T&P for cutting holes in bricks or stone masonry wall for taking pipes and making good the damages with cement concrete 1:2:4 finished smooth with CP 1:4 to original shape including cost of all materials, curing, conveyance, taxes, duties etc. all complete as per specification & direction of Engineer-in-charge.

For pipe to pass in 125mm to 250mm thick wall

Providing all materials, labour, T&P for fitting and fixing white glazed vitreous china wall mounted water closet (European pattern) with seat cover (solid) & fixing of PVC concealed cistern of approved make in all floor including supply & fixing of rack bolt with CED plated stud etc. all complete including cost, taxes and conveyance as per specification all complete as per direction of Engineer-in-charge. Jaquar ARS-WHT-39751S/P or Approved Equivalent Model from : JAQUAR/HINDWARE/CERA

520mmx360mmx410mm size European wall mounted water closet with 460mmx450mmx80mm size concealed cistern

Providing all materials, labour, T&P for fitting and fixing of white glazed vitreous china water closet (European pattern) 'P' or 'S' type with cistern & seat cover, wash hand basin of size 460mmx360mm with one pair basin bolt, one no. hinged rail 760mm long & 4 nos. grab rails 600mm long including supply of sutaible PVC wall plug and Brass screws etc. suitable for handicapped toilets in all floor etc. all complete including cost, taxes and conveyance as per specification all complete as per direction of Engineer-in-charge. Hindware Matrix Set or Approved Equivalent Model from : JAQUAR/HINDWARE/CERA

Supply all materials and labour for fitting and fixing of following size white glazed vitreous china wash hand basin with half pedestal of approved make as per IS-2556 with ISI mark in all floor with supply & fixing of basin bolts & Nut of approved quality including cutting the walls & floor and making good the damages including testing with all taxes, duties, transportation etc. all complete as per specification & direction of EIC.

570mm x 480mm size WHB with pedestal Jaquar CNS-WHT-811 & CNS-WHT-303 or Approved Equivalent Model from : JAQUAR/HINDWARE/CERA

Under counter Basin Jaquar CNS-WHT-701 or Approved Equivalent Model from : JAQUAR/HINDWARE/CERA

Supply all materials, labour & T&P for fitting and fixing of following sizes of white glazed vitreous china flat back, lipped front urinal basin confirming to specification of approved make as per IS-2556 with ISI mark in all floor along with supply & fixing of necessary component parts like pair of C.I./M.S. bracket including connection from existing water supply pipe line & testing the same with all taxes, duties, transportation etc. all complete as per specification & direction of the Engineer-in-charge. Jaquar URS-WHT-13257 or Approved Equivalent Model from : JAQUAR/HINDWARE/CERA

390mmx375mmx590mm size flat back large standing urinal

Providing all materials, labour, T&P for fixing of following sizes of bevelled edge mirror of 5mm thick mounted on 4mm thick AC sheet & CP cup screw with PVC wall plugs in all floor including cost, conveyance, taxes of all materials complete as per specification and direction of E.I.C. Make-Saint gobain

600mm x 450mm size

Providing all materials, labour,T&P and fittings and fixing of different water supply (CP on Brass) fitting (Quarter Turn) as per IS specification & approved make in all floor of following sizes and specification with leak proof threaded joints with thread seal tape or any other method as required and directed including all taxes, duties, transportation etc., testing and rectification of defects after testing complete as per direction of Engineer-in-charge.Make:Jaquar/Hindware/Cera

15mm dia Short Body Bibcock with wall flange Jaquar-KUP-35037PM

15mm dia Angle Stop cock with wall flange Jaquar-KUP-35053PM

15mm dia Pillar cock Jaquar-KUP-35001PM

Concealed Stop cock Jaquar-KUP-35053PM

Sink cock Jaquar-LYR-38347

Overhead shower Jaquar-OHS-35495

C.P. Soap Dish Holder Jaquar-AKP-35731P

Towel Ring Square with round flange Jaquar-AKP-35721P

CP Towel Rail of 600mm long Jaquar-AKP-35711P

600mm long Glass Self Jaquar-ACN-1171N

32mm dia C.P.waste (Half Threaded) Jaquar-ALD-729

C.P. Robe Hook Jaquar-AKP-35761P

Health Faucet Jaquar-ALD-573

Supply all materials, labour, T&P, fitting and fixing of uPVC SWR (Ringfit) Pipes (Type-A) of approved make confirming to IS-13592/1992 with ISI mark, both below & above ground level or fixing on wall surface in all floors including excavation of earth work in all kinds of soil & necessary back filling or required scaffolding with all taxes, duties, transportation including testing etc. all complete as per specification & direction of the EIC.Make:ASTRAL/ASHRIVAD/AJAYA/ SUPREME

110mm dia pipe

75mm dia pipe

Supplying all materials, labour, T&P, fitting and fixing of following dia uPVC SWR (Ringfit) fittings of approved make confirming to IS-14735 with ISI mark with all taxes, duties, transportation & requisite testing as per specification & direction of EIC. Make:ASTRAL/ASHRIVAD/AJAYA/SUPREME

125mm x110mm P-Trap with lip ring

110mmx110mm 'P' Trap

110mmx75mm Nahani Trap

110mm Multifloor Trap

110mmx87.5º Plane bend

110mmx87.5º door bend

110mmx45º Plane Bend

110mm Single Tee with Door

110mm Double Tee with Door

110mm dia single 'Y'

110mm WC connector/Bend with lip ring

110x75mm Reducer

110mm dia Vent cowl

PVC Clamp Suitable for 110mm dia pipe

Providing all materials, labour, T&P for fitting and fixing of following size of 12mm thick toughened glass for urinal partition of approved make in all floor with edge moulding & polishing with chromium plated brass screws, G/W brackets 90° (Double Sided Back Plate) of DORMA make with all taxes, duties, transportation etc. all complete as per specification & direction of Engineer-in-charge.

Toughened glass partition of Size-1200mm ht. x 600mm width for Urinal Partition

Providing all materials, labour & T&P for fitting and fixing of white glazed vitreous china water closet Indian Pan of approved make as per IS-2556 with ISI mark fixing on the floor with 32mm PVC Long flush bend and cement concrete 1:2:4 for fitting the closet etc. & PVC low level cistern complete with all internal fittings of approved make as per IS-7231 with ISI mark in all floor and providing of necessary PVC wall plug, screws and 15mm dia PVC water connecting pipe with union at both end including testing etc. all respect in all floors including cost, conveyance and taxes of all materials etc. all complete as per specification and as per direction of EIC.Make: HINDWARE/CERA/JAQUAR

Squirting Pan (450mmx350mm) with flushing cistern of Jaquar Essco-ECS-WHT-451LE & WHC-WHT-184T

Inner size 300mmx300mmx450mm depth Gully Trap chamber

Providing, fitting, fixing including testing & commissioning of following capacity polyethylene moulded water storage cylindrical tank with lid & locking arrangement as per IS-12701/1996 with ISI mark including cutting holes of required size & shape. Providing, fitting and fixing of CPVC water tank connector / Adaptor with jam nut etc. for filling, delivery, overflow & wash out arrangements, including hoisting upto a height of 10 mtr. above the ground level & placing the tank of required position including construction of brick masonry pedestal up to 450mm ht. from roof with RCC (M-20) base slab, beam of approved design & 125mm thick brick masonry wall up to 2/3 ht.of tank (all round) in C.M. 1:4, 12mm C.P. 1:4 over brick work etc. all complete as per specification & direction of EIC. (Make-Sintex)

5000 Ltr. capacity

Inner size 750mm x 750mm x 500mm depth

Earth work in all kinds of soil for sewerage line within 50m initial lead & 1.5m initial lift including dressing, levelling & breaking clods to maximum 5cm to 7cm & laying in layers not exceeding 0.3m in depth & as per specification & direction of Department.

Providing all materials,labour,T&P for construction of Cement Concrete (1:2:4) Pedestal with 12mm size h.g.c.b. chips as per approved design & drawing for uPVC pipe. The cost inclusive of all taxes, royality, hire & running charges of all machineries, Transportation charges with all consumables etc. all complete as per specification & direction of EIC.

For 160mm dia pipe:-

For 110mm dia pipe:-

Providing all materials, labour, T&P and laying of uPVC in standard lengths suitable for push on joints including lowering the pipes in to trenches to required depth below G.L, with proper allignment & gradient, testing, commissioning, de-watering (if required) including all taxes & duties etc. all complete as per specification & direction of EIC. (Excluding cost for earth wok, back filling which will be paid separately).

For 160mm dia pipe:-

For 110mm dia pipe:-

Providing all materials, labour, T&P required for construction of RCC M-25 man hole chamber of following sizes having cube strength 250 Kg/cm2 at 28 days confirming to IS-456/2000 & IS-3370 at all locations & height using h.g. stone aggregate (Crusher broken) of 20mm & down size including machine mixing, lifting, hoisting, conveying, placing in position, mechanical consolidation, curing, de-watering (if required). The minimum thickness of RCC base slab, all side walls & roof slab shall be not less than 150mm, 150mm & 125mm (avg.) respectively. The cost shall be inclusive of rigid, levelled & plumbed centering & shuttering to required slope, allignment & size for all kinds of RCC work with steel/ ply centering materials with all bracing, ties, anchorage & supports and removing the same after required paid & placing M.S.Reinforcement HYSD bar of required dia including cutting, bending, straightening of approved quality as per approved design & drawing & tying the grills for RCC works & placing in position using binding wires (18 to 20 gauge soft drawn & cold annealed). Providing all materials labour T&P required for construction of R.C.C(1:1 1/2:3) manhole chamber including necessary earth work,concrete etc of following filing sand confirming to approved drawing & design complete as direction by Engineer-in Charge.

Manhole chamber of Inner size 800mmx900mmx 900mm depth.

Extra for every additional depth of 0.10mtr. or part there of manhole size 800mmx900mm from 900mm depth upto 1500mm depth.

Labour for drilling a perfectly vertical bore hole for a specified dia for a specified depth below G.L through consolidated and un-consolidated rocks with down the hole hammer drilling rig or combination drilling rig (1200 cfm/ 300 psi) as required to suit the site condition as per the direction of EIC including use of own rigs with its accessories, T&P & consumables etc. for lowering of 150mm dia PVC/GI pipes for housing fitted with socket and with or without well screen as per the necessity for soft, medium, hard and boulder formation (GI/ PVC casing pipes, if required to prevent collapse of over burden is to be provided by the contractor including lowering and withdrawing after completion of the Tube Well).

Labour for drilling of 150mm dia bore from '0' mtr. to '100' mtr.

Providing & lowering the following size PVC pipes (ASTM) with or without slotted pipes as per the necessity from 1.00m above ground level up to required depth and fitting and fixing up in perfectly vertical position, including cutting, threading pipe and slotted pipe and supplying and fixing all jointing materials, T&P etc. complete and keeping the top of the casing pipe threaded including plugging the tube well to prevent entry of foreign materials from above. The cost inclusive of pipes, fittings, labour, consumables, POL, consumables with hire & running charges of machinaries etc. as per specification & direction of EIC.

Lowering of 150mm (6'') dia PVC plastic pipes Sch-80 as per ASTM-D-1785/2004 upto required depth.

Cleaning and developing the tube well using their own compressor continuously worked till clear and adequate discharge is obtained from the tube well including supply and use of all necessary equipment, labour, all consumables, running & hire charges of machinaries etc. all complete as per the direction of the EIC.

Supplying all materials, labour & tools and plant and grouting with cement slurry for sanitary sealing around the GI/PVC casing pipe up to 3mtrs below ground level to plug the bore hole including cost of cement all complete as per specification & direction of the Engineer-in-Charge.

Outer size 1400mm x 1400mm x 1200mm ht. chambers

Supplying submerssible pump with squirrel cage introduction type submerssible type submerssible electric motor to run on three phase or one phase line voltage ranging from 320volt to 450volt confirming to IS 8034-2002 with following specifications.

2HP 3Phase 3Stage head range 30-54 meters discharge 155 to 110 LPM with outlet dia of 32mm

DOL Control Panel (As required)

2.50Sqm Cable (As required)

32mm di steel short piece (As required)

Steel rope with cover (As required)

Well Cap (As required)

50mm size C.I. Bracket (As required)

20mm dia Rigid uPVC pipes. (As required)

RASHID SHAKEEL HASAN