Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹25.8 LAccepted-AOC | L1 | Accepted-AOC Being L1 | |
| 2 | L2₹26.7 L+₹73,500 (2.83%)Rejected-Finance HIMALAYA COMPLEX MAIN BAZAR LEH LADAKH 194101 J K | LEH | LEH | JAMMU AND KASHMIR | 194101 | L2 | Rejected-Finance Being L2 |
| Sl No | Description | Qty | Unit | JK Technical Services L2 | M/S SEVEN LAKE CONSTRUCTION L1 |
|---|---|---|---|---|---|
| 1.00 | Material and labour for preparing black top surfaces by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surfaces with gunny bags to remove all loose dirt etc incl removing material to low lying area from MOD land complete all as specified and directed. | 450 | X Square Metre | 250 ₹1,12,500 Lowest | 500 ₹2,25,000 |
| 2.00 | Apply evenly a priming/tack coat of bituminous primer ( VG-10) at the rate of 5 kg per 10 sqm complete all as specified and directed. | 450 | X Square Metre | 220 ₹99,000 Lowest | 600 ₹2,70,000 |
| 3.00 | Material and labour, premixed semi dense asphaltic concrete 30 mm thick consolidated thickness , using combined graded aggregate i.e crushed stone coarse aggregate , fine aggregate (sand) & filler (inherent filler)/OPC 43 grade ) of physical properties as specified and as per table given 9 to refer SSR Part-I OF 2009), Pre-heated mixed with 5.5% binder content by weight of total mix using VG-30 grade bitumen, laid with mechanical paver , rolled & compacted to a uniform smooth surface with 8 to 10 tonne power road roller , complete all as specified and directed.
Note:- (i) Thickness of semi dense asphaltic concrete and quantities of materials as mentioned in particular specifications/SSR are the minimum. The quoted rate shall also be deemed to include for provision of more materials in comparison to those mentioned/specified in the item, if shape all as directed by the GE.
(ii) Hot mix plant of adequate capacity shall be used for heating and mixing stone and fine aggregate and binder (bitumen) and semi dense asphaltic concrete shall be laid in single layer with self propelled mechanical paver all as directed by the GE. | 450 | X Square Metre | 4,500 ₹20,25,000 | 4,000 ₹18,00,000 Lowest |
| 4.00 | Providing painting lines, dashes, arrows, letters, etc on roads, pavements and the like exc 10 cm wide with road marking paint, white or golden yellow complete all as specified and directed . | 13 | X Square Metre | 600 ₹7,800 Lowest | 2,000 ₹26,000 |
| 5.00 | Repair to pot holes any depth, not exc 1 sqm each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths, etc. cutting around edges to at least 25mm in depth, making good by apply paving bitumen, tack coat (VG-10) at 5 kg per 10 sqm. putting in premixed bituminous macadam, well rammed and sealed with binder 9.8 kg per 10 sqm, blinded with 0.09 cu m of stone chippings, 6.3 mm size and again will rammed (including supply or premixed macadam, binder and chippings), depth of potholes exc 30mm complete all as specified and directed. | 22 | X Square Metre | 3,000 ₹66,000 Lowest | 7,000 ₹1,54,000 |
| 6.00 | Bituminous premix macadam with 4% paving bitumen binder, laid, rolled and compacted to required camber and gradient (compacted thickness upto maximum 75mm) complete all as specified and directed. | 22 | Cubic Metre | 8,000 ₹1,76,000 | 400 ₹8,800 Lowest |
| 7.00 | Supply and fixing in repair solar cat eye aluminium alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency mono mystified solar panel 2.4V/ 0.3 watt one NI-ed rechargeable battery (1.2V/ 1600MA) consisting of super bright LED with10,000 to 18,000 mcd completed as per manufactures instructions complete all as specified and directed. | 100 | EACH | 1,200 ₹1,20,000 | 1,000 ₹1,00,000 Lowest |
| 8.00 | Manufacturing, supplying and fixing retro-reflective regulatory sign board of size 900 mm dia meter made out of 2 mm thick aluminium sheet, face to be fully covered with high intensity encapsulated lens type retro -reflective sheeting as approved by Engineer-in-charge . Letter, symbols, borders etc. will be as per IRC - 67 with required colour scheme on the boards and with the high intensity grade A. The aluminium sheet to be riveted to M.S. frame of angle iron of size 40x40x4 mm. The boards will be fixed to 1 No.50x50 mm square post made of M.S. angle 50x50x4mm, 4 m long welded to the frame with adequate anti-theft arrangement .Sheet work to be painted with two or more coats of synthetic enamel paint over an under coat (primer) and back side of aluminium sheet to be painted with two or more coats of epoxy paint including appropriate priming coat complete all as specified and directed | 6 | EACH | 10,000 ₹60,000 | 1,500 ₹9,000 Lowest |
Tender Value
₹27 L
EMD Value
₹54,000
Closing Date
3 Jul 2025, 6:00 pmClosed
GE I R AND D Chandigarh
Garrison Engineer I R and D, DIHAR Base Lab, Ground Floor, Near 3 (BRD) AF Stn, Industrial Area, Ph-II, Ramdarbar, Chandigarh
RE-SURFACING OF BITUMINOUS ROAD AT VARIOUS LOCATION AND ROAD FURNITURES AT DIHAR LEH
2025_MES_710801_1
GE I R AND D/CHD-05/2025-26
Open Tender
Civil Works
Item Rate
180 days
Leh
As per tender documents
8 documents required · 8 mandatory
₹500
GE I R AND D Chandigarh
₹54,000
Yes
11 Dec 2025
28 May 2025
5 Jul 2025
28 May 2025
3 Jul 2025
13 Jun 2025
Amount
Material and labour for preparing black top surfaces by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surfaces with gunny bags to remove all loose dirt etc incl removing material to low lying area from MOD land complete all as specified and directed.
Apply evenly a priming/tack coat of bituminous primer ( VG-10) at the rate of 5 kg per 10 sqm complete all as specified and directed.
Material and labour, premixed semi dense asphaltic concrete 30 mm thick consolidated thickness , using combined graded aggregate i.e crushed stone coarse aggregate , fine aggregate (sand) & filler (inherent filler)/OPC 43 grade ) of physical properties as specified and as per table given 9 to refer SSR Part-I OF 2009), Pre-heated mixed with 5.5% binder content by weight of total mix using VG-30 grade bitumen, laid with mechanical paver , rolled & compacted to a uniform smooth surface with 8 to 10 tonne power road roller , complete all as specified and directed. Note:- (i) Thickness of semi dense asphaltic concrete and quantities of materials as mentioned in particular specifications/SSR are the minimum. The quoted rate shall also be deemed to include for provision of more materials in comparison to those mentioned/specified in the item, if shape all as directed by the GE. (ii) Hot mix plant of adequate capacity shall be used for heating and mixing stone and fine aggregate and binder (bitumen) and semi dense asphaltic concrete shall be laid in single layer with self propelled mechanical paver all as directed by the GE.
Providing painting lines, dashes, arrows, letters, etc on roads, pavements and the like exc 10 cm wide with road marking paint, white or golden yellow complete all as specified and directed .
Repair to pot holes any depth, not exc 1 sqm each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths, etc. cutting around edges to at least 25mm in depth, making good by apply paving bitumen, tack coat (VG-10) at 5 kg per 10 sqm. putting in premixed bituminous macadam, well rammed and sealed with binder 9.8 kg per 10 sqm, blinded with 0.09 cu m of stone chippings, 6.3 mm size and again will rammed (including supply or premixed macadam, binder and chippings), depth of potholes exc 30mm complete all as specified and directed.
Bituminous premix macadam with 4% paving bitumen binder, laid, rolled and compacted to required camber and gradient (compacted thickness upto maximum 75mm) complete all as specified and directed.
Supply and fixing in repair solar cat eye aluminium alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency mono mystified solar panel 2.4V/ 0.3 watt one NI-ed rechargeable battery (1.2V/ 1600MA) consisting of super bright LED with10,000 to 18,000 mcd completed as per manufactures instructions complete all as specified and directed.
Manufacturing, supplying and fixing retro-reflective regulatory sign board of size 900 mm dia meter made out of 2 mm thick aluminium sheet, face to be fully covered with high intensity encapsulated lens type retro -reflective sheeting as approved by Engineer-in-charge . Letter, symbols, borders etc. will be as per IRC - 67 with required colour scheme on the boards and with the high intensity grade A. The aluminium sheet to be riveted to M.S. frame of angle iron of size 40x40x4 mm. The boards will be fixed to 1 No.50x50 mm square post made of M.S. angle 50x50x4mm, 4 m long welded to the frame with adequate anti-theft arrangement .Sheet work to be painted with two or more coats of synthetic enamel paint over an under coat (primer) and back side of aluminium sheet to be painted with two or more coats of epoxy paint including appropriate priming coat complete all as specified and directed
JK Technical Services (BID ID -3331294)
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.PDF
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .