SPL REPAIR TO BLDG NO T-01 (JCOS SINGLE ACCN) AT LOWER BLOCK OF MH SHILLONG AND SPL REPAIR TO BLDG NO DSM-17 (MEDICAL STORE) OF MH SHILLONG AND PROVN OF PVC WATER TANK 1000 LTR FOR BLDG NO H-17 (HOSP LAB) OF MH SHILLONG UNDER GE SHILLONG

Amount

Taking down chowkat or frame exc 1.5 Sqm but n.exc 4 Sqm each (without taking off shutter from the frame) complete all as specified and as directed.

Taking down chowkats or frames n. exc 1.50 Sqm each with shutters (without taking off shutter from the frames) complete all as specified and as directed.

Demolition of Brickwork/solid concrete block work built in Cement mortar complete all as specified and as directed.

Dismantling unframed wooden work in fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in section complete all as specified and as directed.

Demolition of cement concrete in ground floors and pavings n exc 15cm thickness (below or above ground level) complete all as specified and as directed.

Demolition of reinforced cement concrete in ground floors and pavings n exc 15cm thickness (below or above ground level) complete all as specified and as directed.

Dismantling plain or corrugated steel sheeting, any guage, thickness incl Nainital, similar pattern as in roof coverings. complete all as specified and directed by Engr-in-Charge.

Dismantling floor, hearth , wall tiling including cement mortor bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

Dismantling wall and ceilling boards of any description including cover fillets complete all as specified and as directed.

Dismantling boarding any description fixed in any position with nails complete all as specified and directed.

Dismantling of timber scantling 40 sqcm over in section in any position (unframed work).

RCC nominal mix 1:2:4 type B-1 (using 20mm graded aggregates) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in kitchen shelves, water tank staging and the like complete all as specified and as directed.

M&L for mild steel TMT bars 10mm dia and over, cut length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia quality conforming to Fe 500 or Fe-550 as in steel reinforcement for concrete complete all as specified and directed.

S&F Gl frame work for snapgrid false ceiling comprising of Gl perimeter channnel 0.55 mm thick with Main T- flange of 25 mm and web of 30 mm fixed to surrounding wall angle with flange and web 25 mm each , Cross T with flange 25 mm and web 25 mm fixed to main T, Main T is suspended from soffit @ 1200 mmm c/c using GI wire of 4mm thickness GI frame will be 60 x 60 cm to recieve E-board ceiling complete all as specified and as directed .

M&L 4mm thick E Board 600x600 mm prepainted fibre boards ceiling designer/decorative type with different designs as approved by the Engr-in-charge fixed or laid in ceiling timber /GI/ aluminium frame work in ceiling flat or sloping complete all as per manufacturer instruction complete all as specified and as directed.

M&L for 2nd class hard wood plain fillets. square, rectangular or triangular in section, clean sawn, secured with nails or brads , sectional area exc. 13 and n.exc. 25 sqcm complete all as specified and as directed.

S&F 2nd class SW boarding 20mm thick fixed with nails in eaves board plained one side with butt joint complete all as directed.

M&L 2nd class hard wood in scantling clean sawn timber fixed all as specified and directed

M&L 2nd class hard wood plain solid straight chowkats and frames wrought framed rebated on the solid ,rounded or chamfered ,put together with glue pinned at joints , supplied and fixed complete all as specified and as directed.

S&F 30 mm thk Flush door shutters solid core construction with block board core and plywood face pannels , commercial type on both sides complete all as specified and as directed.

S&F stainless steel wire cloth,0.36mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and as directed.

M&L for 6mm thick Veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on one faces; fixed with screws to timber frame work complete all as specified and as directed

M&L 12 mm thick Plywood (07 Nos of ply) , grade BWP, type BB, fixed with screws to timber frame work complete all as specified and as directed.

S&F 0.90 mm thick decorative laminates type 1 of surface finish color and pattern as approved fixed with approved adhesive as per manufactures instruction complete all as specified

S&F butt hinges 75 mm medium weight, stainless steel, and fixed complete all as specified and as directed.

S&F Butt hinges 125mm, medium weight, stainless steel, and fixed complete all as specified and as directed.

S&F Aluminium anodised barrel tower bolts of extruded section and fixed complete 150 mm long complete all as specified and as directed.

S&F extruded aluminium alloy handles fabricated type anodised of size 150 mm complete all as specified and as directed.

S&F Aluminium alloy, anodised, sliding door bolt with hasp staple (bolt type) 300mm size and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and as directed.

S&F powder coated (min powder coating 50 micron) anodised aluminium frame for doors, windows , ventilators plain or sliding type with one or more rebates including joining cleat for fixing etc complete all as specified and as directed

S&F powder coated (powder coating min 50 micron) anodised two or three track sliding type window and ventilator shutters or side hung / without sash , aluminium section weighing 0.55 kg/m including necessary joining cleats,glazing clips, rubber neoprene packing , anodised aluminium snap beading screws ,anodised aluminium fittings such as peg stays 150 mm long(1 no) hinges type B-21 100 mm long (2 no) suitable handle (1 no ) complete all as specified and as directed.

M&L for 4.80 mm thick sheet glass quality and glazing fixed to aluminium frame n.exc 0.50 sqm complete all as specified and as directed.

M&L for 4.80 mm thick frosted sheet glass quality and glazing fixed to aluminium frame n. exc 0.50 sqm complete all as specified and as directed.

M/L precast cement concrete block massonry with solid blocks exc 10 cm in width and settings in CM 1:6 type C1 1:3:6 (20mm graded aggregate) complete all as specified and as directed.

M/L precast cement concrete block massonry with solid blocks nexc 10 cm in width and settings in CM 1:4 type C1 1:3:6 (20mm graded aggregate) complete all as specified and as directed.

S&F pre-painted Galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tenssile strength of 550 Mpa as in roof covering / cladding including fixing with self driving machine made screws with washers and fitting of same manufacture of approved profile, complete all as specified and directed by Engr-in-Charge.

S&F pre-painted Galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of an colour having tenssile strength of 550 Mpa as in roof covering including fixing with self driving machine made screws with washers and fitting of same manufacture of approved profile, shape and colour complete all as specified and directed by Engr-in-Charge.

M & L Glazed ceramic Coloured Tile 300x450x7mm/300x600x7 mm thick in Skirting, Dados, etc., Set and Jointed in Neat Cement Slurry and Pointed in White or Colour Cement to match laid over and including a backing coat of 10mm thick CM 1:4 screed, complete all as specified and as directed.

M&L for 25 mm thick Cement concrete type B-1, 1:2:4 (20mm graded aggregate) used over sub base to recd floor tiles complete all as specified and directed

M&L for Non Skid Ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with the tile colour including Screed bed or bedding layer of mortar 15 mm thick for laying floor finishes in CM (1:6). complete all as specified and directed.

M&L for light shade vitrified tiles , 9 to 10mm thick (square / rectangular) polished, area of each tile n.exc 0.36 sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to mortar.Laid over and including15 mm thick cement screed bed in CM 1:6 complete all as specified

All as Per Item no 41 above but in vertical surfaces such as skirting/dado laid over and incl. a backing coat of 10mm thick CM 1:4 complete all as specified

Taking down plastering on lathing (other than wire-netting, without removing lathing, in cement mortar (one side only measured in cases where both sides are plastered).

M&L for rendering 10mm (cement plaster 1:6) thick on stone masonry surfaces or surface other than fair face of brick-work or on one side of lathing complete all as specified and as directed.

M&L for rendering 15mm (cement plaster 1:4) thick on the other side of lathing with approved Water proofing compound @ 3% by the weight of cement or as per manufacturers instructions complete all as specified and as directed.

Supply only Integral waterproofing compound

S&F for 20 mm dia harrison rails, stainless steel chromiun plated with fixing brackets stops , rollers etc all as directed and specified.

S&F for 20 mm dia brass chromium plated brackets and lattoo all as directed and specified.

S&F solid PVC door frame of size 50 mmx 47 mm made out of 5mm plain colour PVC sheet reinforced with MS square tube as per specifiecation complete all as specified and as directed.

S/F Factory made solid panel PVC door shutter 30 mm thick (style) considering of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rails, lock rail & bottom rails on either side & as gap insert for top rail & bottom rail, Panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and jointed togeather with solvent cement, fixing in the frame at site as per specification & drawing complete all as specified and as directed.

S&F Bib taps, cast copper alloy fancy type 15mm bore CP, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

S&F stainless steel gratings 100mm bore size fixed with cement motar complete all as specified .

S&F 15 mm bore brass CP single lever basin mixer for mixing hot & cold water screwed down high pressure for iron pipe and fixed complete all as specified and as directed

S&F vitreous china wash down water closet EWC pan (Pedestal Pattern) with P or S Trap white (excluding flushing cistern & flush pipe) incl connection to out going pipe and flushing pipe complete all as specified and as directed

S&F plastic water closet seat cover, white, closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device complete all as specified and as directed

S&F PVC valveless, 10 ltrs, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle with flush pipe including brackets complete all as specified.

S&F in repairs Vitreous china WHB, white, flat back, of size 550 x 400 mm including brackets, waste coupling 32mm, and waste Pipe, 32mm incl pedastal complete all as specified and directed.

M&L 75mm dia PVC(SWR)floor trap, plain with grating including jointing with solvent cement complete all as specified and as directed.

M&L for 110 mm PVC (SWR) pipes single socketed in any length with rubber ring joints ,laid in trenches or in floors complete all as specified and as directed.

M&L for 75 mm PVC (SWR) pipes single socketed in any length with rubber ring joints ,laid in trenches or in floors complete all as specified and as directed.

S&F PVC (SWR) bends 110mm dia complete all as specified and as directed.

S&F PVC (SWR) bends 75mm dia complete all as specified and as directed.

S&F PVC(SWR) 75mm dia vent cowls

S&F PVC Connections 15mm size with PTMT Nuts of length 450mm and fixed, complete all as specified and as directed.

Supply and Fix half round PVC rain gutter of dia 180 mm including clamps, bolts and nuts complete all as specified and as directed,

M&L for 180 mm PVC (SWR) pipes single socketed in any length with rubber ring joints ,laid in trenches or in floors or in wall incl bends if required complete all as specified and as directed.

Dismantling water tanks exc 500 ltrs but not exc 1000 ltrs capacity , complete all as specified and as directed.

Supply and fixing rotational moulded HDPE water storage tank ,double layer ,ISI marked (cylendrical vertical type with closed top) of capacity 1000 ltrs in position incl 20mm float ball brass valves, high pressure, with polythene float and flynut complete , screwed for iron pipe or brass ferrule and fixed for iron pipe and fixed all as specified and directed.

S&F as in repair Gun metal globe or gate valves with iron wheel head screwed both ends for iron pipe 15 mm bore and fixed as in repair complete all as specified and as directed

S&F brass chromium plated tubular towel rail 20mm dia D type 60 cm long between flanges complete all as specified and as directed.

Taking up or down steel tubing and disconnection, for 15mm bore of pipes complete all as specified and as directed.

Taking up or down steel tubing and disconnection, for 20mm bore of pipes complete all as specified and as directed.

Supply and Laying Steel Water Tubing 15mm dia (Bore), Galvanised, ‘Medium Grade’ with all Fittings, fixed on Walls, Ceiling or laid in Floors or any other Situation, complete as all specified and as directed.

All as per Item above 74 above but for 20mm dia (Bore).

S&F stop valve CP cast copper alloy screwed down, high pressure with crutch or butterfly handle 15mm dia complete all as specified and directed.

S&F cutting chases, pinning in concrete block workmaking good to facing where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades shelves, lintels etc, and cutting chases for concealed water tubing or concealed conduit wiring etc and making good, cutting not exc 10cm girth.

M & L 75mm thick PCC 1:4:8 type D2 as in sub base finished even and rough complete all as specified and as directed.

M&L for vitrified ceramic tiles dark shade (Exterior grade), 10mm thick (square /rectangular) polished , area of each tiles not exc 0.36 in floors etc, laid over and incl. 15mm thick 1:6 screed bed jointed pointed with coloured cement to match the tiles complete all as specified.

M&L for 75 mm thick cement concrete 1:2:4, type B-2 (using 40mm graded agg) as in plinth protection finished even and smooth without using extra cement.(incl necessary joint filling with mixture of paving bitumen & sand in 1:3) complete all as specified and as directed.

S&F MS framed work such as grills, gratings, etc with ends of bars, shouldered and/ or riveted or forged into spikes framed guard bars, barred iron doors, ladders, framed balusters, walk way, railing and framed work of water tanks and similar work confirming to Fe 290 Gde E-165 complete all as specified and as directed.

Complete removal existing treatment and applying 1mm thick of white wall care putty to achieve smooth surfaces and applying two coats of Oil Bound Distemper of approved shade/tint complete all as specified and as directed.

M & L for preparation of new plastered/concrete surfaces of walls, providing 1 mm thick of white wall care putty to achieve smooth surfaces and applying two coats of Oil Bound Distemper of approved shade/tint complete all as specified.

M&L for preparation of new steel surfaces of any description , over 10 cm in width or girth, not otherwise described and applying two coat of synthetic enamel paint over a coat red oxide primer all as specified.

M&L for preparation of old wooden surfaces of any description over 10cm in width or girth and treated with one coat of synthetic enamel paint complete all as specified and directed.

M&L for preparation of new or previously untreated surfaces of wood and wood based materials of any description not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paint over a coat of pink primer all as specified and as directed.

M&L for preparation of new or previously untreated surfaces of wood and wood based materials description n exc 10cm width or girth and applying two coat of synthetic enamel paint (ordinary tint) over pink primer surfaces when unconnected with other painting or when painted in different tint complete all as specified and as directed.

M&L for preparation of plastered or unplastered old decorated surfaces of walls by washing rubbing down and stopping of any external painted surfaces and priming with alkali resistant primer paint applying two coats of weather coat exterior paint with roller incl filling of holes and cracks with suitable material like cement or plaster of paris etc complete all as specified and as directed.

M&L for preparation of new plastered/concrete surfaces of walls and priming with alkali resistant primer paint applying two coats of weather coat exterior paint with roller etc complete all as specified and as directed.

Hacking out old broken glass (any thickness, size, quality or description) from metal framed or wooden including punching or drilling out old glazing pins/ spring clips complete all as specified and as directed.

M&L 3mm thick sheet glass, ordinary quality and glazing with oil putty/wooden beadings in squares n.exc 0.50 Sqm in each pane complete all as specified and as directed.

S&F 35 mm thk Flush door shutters solid core construction with block board core and plywood face pannels , commercial type on both sides complete.

Supply and fixing 2nd class HW 35mm thick plain framed panelled shutters (any number of panels), with panel of timber flats on both sides or of veneered particle board medium density, wood particle board with commercial face veneers; supplied and fitted to chowkats complete all as specified and as directed.

S&F 35mm thick 2nd class hard wood glazed and skelton shutters open rebated (door/window/ventilators) and prepare to receive glass, gauze, (without sash bars), edges of framing divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers beads for securing glass, etc. complete all as specified and directed.

S&F Aluminium anodised barrel tower bolts of extruded section and fixed complete 100 mm long complete

S&F extruded aluminium alloy handles fabricated type anodised of size 125 mm complete

S&F double legged floor door stopper aluminium alloy with rubber etc complete all as specified and as directed.

M&L for 4.0 mm thick sheet glass quality and glazing fixed to aluminium frame n.exc 0.50 sqm complete all as specified and as directed.

M&L for 4.0 mm thick sheet glass quality and glazing fixed to aluminium frame exc 0.50 sqm complete all as specified and as directed.

M&L for 4.0 mm thick frosted sheet glass quality and glazing fixed to aluminium frame n. exc 0.50 sqm complete all as specified and as directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds,mitred/stopped ends etc complete all as specified and directed by Engineer-In-Charge

M&L for cement concrete Type B-0, 1:2:4 using 12.5mm graded stone aggregate as in saucer drain etc complete all as specified and as directed.

S&F in repairs 20 mm dia aluminium inodised double rod brackets all as directed and specified.

S&F 15 mm bore CP health Faucet cock with Flexible pipe 1.25 m long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and as directed.

Supply and fixing rotational moulded HDPE water storage tank ,double layer ,ISI marked (cylendrical vertical type with closed top) of capacity 500 ltrs in position incl float ball brass valves, high pressure, with polythene float and flynut complete , screwed for iron pipe or brass ferrule and fixed for iron pipe and fixed all as specified and directed.

M&L 100mm thick cement concrete using (40mm graded aggregate) type D-2 (1:4:8) as in sub base.

Surface excavation not exceeding 30 Cm deep and averaging 15 Cm deep in soft / loose soil all as specified.

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out in soft/loose soil, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm in soft/loose soil complete all as specified & directed.

M & L for hardcore of broken brick/stone or boulders gauge n exc. 63mm, deposited, spread and levelled in layers n exc. 15cm thick, watered and remmed to a true surface, complete all as specified

M&L PCC 1:4:8 type D-2 using 40mm graded stone aggregate as in foundation filling mass concrete all as specified and directed.

M&L for Cement concrete Type C1, 1:3:6 (using 20 mm graded stone aggregate) any thickness, size or shape including pilasters, buttresses columns, pillars, boundary pillars and posts (including caps and bases) complete all as specified & directed.

S&F MS angle for aerial mast, water tank staging and the like incl caps , bases splices etc builtup from two or more beam or channel sections or angles with plates incl all lattice bars stiffers gussets etc of gde Fe-290(Gde E-165) complete all as specified and as directed

S&F for mild steel, plain, black sheet of 1.25mm thick in hearths; covering to door shutters; covering to door chowkats (frames); chullah hoods; water tanks; water troughs; ducts; urinal troughs and funnels, etc. cut to size edges beaded if directed, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel members, etc., with plain 40 mm lap joints or welded /riveted seams including bending, turning up, mitred angles, stopped ends, outlets, etc. as required complete all as specified and directed.

M&L for machine cut kota stone slab flooring 16-18mm thick over cement screed base laid & jointed with grey cement slurry mixed with pigment to match the shade of slab incl rubbing & polishing laid over and incl 20mm thick cement screed bed in CM 1:3 complete all as specified and directed.

M&L for machine cut kota stone slab flooring 16-18mm thick in riser of steps, skirting, dado and piller laid over cement slurry mixed with pigment to match the shade of slab incl rubbing & polishing laid over and incl 15mm thick cement backing screed coat in CM 1:3 complete all as specified and directed.

Taking down carefully copper/aluminum point wiring light/fan/sockets out let/power point complete (fittings such as switches, sockets, ceiling rose, pendent holders, light fittings etc. are to be measured separately) and/or drawing out from existing conduit/batten and making good disturbed surface of walls/floors/ceiling, complete all as specified.

Material and labour for Point wiring with 1.50 Sqmm single core PVC insulated , unsheathed cable FRLSH, 1100 volt grade with multi stranded copper conductor drawn through and incuding medium grade, ISI marked, including 20 mm casing caping PVC on wall/ceiling and incuding provision of 1.50 Sqmm single core PVC insulated , unsheathed cable FRLSH, 1100 volt grade with multi stranded copper conductor green colour as earth continuity conductor and connected to common earth dolly with suitable size of lugs, including mild galvanised sunken box/metal flush box made out of 1.6 mm thick galvanised sheet metal conforming to IS-5139(pt-I) of 1969 and IS:14772-2000 with earth dolly and coated with two coats of anti corrosive paint over a coat of red oxide primer both internally and externally including accessories including making good the disturbed surfaces as per existing for one light point controlled by one switch complete all as specified and directed by Engr-in-charge.

Description all as per Srl item No. 117 above but for one bell point controled by one bell push .

All as per item No. 117 above but One 3 pin 5 Amps socket out let points on independent board

All as per item No. 117 above but 5 Amp socket on same board with other switches.

Description all as per Srl item No.117 above but with 2.5 Sqmm cable for socket outlet point 5 Amp on Independent board.

Material and labour point wiring for power point controlled by one, one way switch using 4 sqmm nominal cross sectional area multistranded copper conductor ,PVC insulated unsheathed FRLSH cables in and including 20 mm width or higher size PVC casing caping and fittings of medium grade fitted with chromium plated brass screws & washers and 4 sqmm nominal cross sectioanl area multistranded copper conductor FRLSH PVC insulated unsheathed earth wire and connecting to earth dolly and brass screws, washers etc. complete all as specified and directed.

Supply and fix switch piano flush type, single pole , 5/6 Amps, one way complete all as specified.

Supply and fix socket outlets 2 in 1, 3 pin, 5/6 Amps flush type230/240 V complete all as specified and as directed.

Supply and fix switch socket combination 5 in 1 , 6 pin , (5/16 Amps ) flush type controlled by one switch complete all as specified.

Supply and fixing ceiling rose surface bakelite 65x50mm, 3 terminal complete all as specified. Make : Cona , Plaza, Anchor .

Supply and fixing LED batten fittings 1x 20 Watt complete including LED light driver, holder, LED lamp and connection up to ceiling rose with three core wire fixed to wall with 2 nos PVC block of suitable size including taking down old unserviceable one .

Supply and fixing LED light fitting with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete

S & F Wall bracket decorative LED fitting with lamp 10 Watt complete with necessary connection complete all as specified and as directed by Engr-in-Charge.

S&F lamp holder, insulated body, with back plate for batten fitting complete. Make- Havells/anchor/Legrand.

Supply and fix in repairs LED lamp 7 Watt B22 base Color Temp 6500 K complete including taking down old unserviceable one all as directed.

Supply and fixing of hot water Geysers of 25 ltrs capacity 5 star rated vertical type includng fixing of bolts , nuts grouted into the wall , and necessary cement work , making good of disturbed surface of wall , giving electric and water connection and testing after installation.

S&F heat resistant PVC connection pipe for hot and cold water 450mm long 15mm dia all as specified and directed.

Supply & laying galvanized steel tubing, medium grade laid in trenches/floor/wall and joined including necessary fittings such as bends, elbow, tees, sockets, etc for 15mm dia pipe all as specified and directed.

Supply and Fix of Angle stop valve of PTMT any colour high pressure screwed for iron pipe and fixed, (Minimum weight 15mm-90gms) all as specified and directed

S & F single pole and neutral enclosure with a two pin and earth plug and socket with one single pole MCB complete all as specifided and as directed

Supply and fix exhaust fan, plastic body AC single Phase. 230V of size 250mm sweep with, blades, and frame and louvers including enlargement of hole and giving proper finishing complete all as specified and directed by Engr-in-charge.

Supply and fix in repairs MCB DB 6 way vertical sheet metal enclosure TPN 415 volts, 50 Hz, with IP-43 protection, double door with 200 Amps standard bus bar of suitable size and common neutral link all enclosed in standard sheet flush mounting complete all as specified.

Supply and fix in repair MCB Distribution board , 240 volts single pole and neutral ,double door, sheet steel, enclosure powder coated with 100 Amps rated busbar with neutral link, 12 ways , fixed on wall duly grouted in solid block wall or on wooden board with electrical connection, including taking down complete all as specified and directed.

Supply and fix MCCB TPN, 240 Volts, 100 Amps, 10 kA rupturing capacity415 Volts complete all as specified and directed including taking down old one.

Supply and fix MCB DP, 240 Volts, 40 Amps, 10 kA rupturing capacity 'C' series complete all as specified and directed including taking down old one.

Supply and fix in repairs MCB, single pole 240 volts 6 to 32 Amps capacity fixed in DB's

M & L Sub main wiring with two run single core 6 Sqmm FRLSH copper conductor cable PVC insulated, unsheathed, 1100 V on PVC Casing & Caping on wall/surface ISI marked with all accessories such as Tees, elbows, junction boxes etc, as required fixed on wall alongwith one run of 6 Sqmm single core PVC FRLSH insulated unsheathed copper conductor cable as continuous earth wire and connecting to existing main switch board / distribution board and testing on completion inculding taking down old wiring etc complete all as directed.Note: (i) Two runs of 6 sqmm and one run of 6 sqmm cable and one run of PVC conduit shall be measured as one RM.

Material and labour for earthing complete with galvanised steel earth plate electrode 60 Cm X 60 Cm X 6 mm buried directly in ground vertically to a depth notless than 2.25 mtr deep below ground level with top edge of earth plate at a depth not less than 1.5 m below normal ground level connected to galvanised earth lead wire 4.0 mm dia by means of bolts, check nuts and washers ,galvanised steel and protected by GI pipe 15 mm bore light grade & connected to main switch board or main control board as directed and including concrete pit in PCC (1:3:6) type C1, precast RCC (1:2:4) type B1 cover slab 30 cm X 30 cmX 5 cm with 10mm dia TMT bars 8 cm C/c both ways and one handle for lifting made out of 8 mm dia TMT bar, funnel, wire mesh, 20mm bore galvanised iron pipe (medium grade) for watering, charcoal or coke and salt in alternative layers, necessary excavation and earth work in any type of soil and including necessary testing complete all as shown in Electrical Plate No 3 of SSR part -I.

Supply and fixing modular switch 1 way 6 A with moduler frame and cover complete 230/250 volt , AC supply, ISI Marked, with cover plate complete all as specified and directed.

Supply and fixing modular bell push 1 way 6 A module 230/250 volt with frame and cover complete , AC supply, ISI Marked, with cover plate complete all as specified and directed.

Supply and fixing modular sockets 6A 2/3 pin combined 2 module, with frame and cover complete 230/250 Volts, 50 Hz , AC supply, ISI Marked, with cover plate complete all as specified and directed.

Supply and fixing modular sockets 6A/16A 2/3 pin combined 2 module with frame and cover complete 230/250 Volts, 50 Hz , AC supply, ISI Marked, with cover plate complete all as specified and directed.

Supply and fixing modular switch 16A 1 module with frame and cover complete 230/250 Volts, 50 Hz , AC supply, ISI Marked, c with cover plate omplete all as specified and directed.

Supply and fixing call bell ding dong, AC, 230 V, Single pole ISI marked all as specified and directed.

Supply and fix ininverter LED bulb 12 Watt B22 base Color complete including taking down old unserviceable one all as directed.

Supply and fix ininverter LED bulb 20 Watt B22 base Color complete including taking down old unserviceable one all as directed.

S & F LED Luminaries 600mm x 600mm 36 watt, 220 V, AC recessed type with hifg efficiency PMMA diffuser soft galre free light complete with driver, holders and LED lamps suitable for roof ceiling including connecting up with 3 core flexible wire complete all as directed and specified.

Supply and fix in repairs MCB Distribution board , 240 volts single pole and neutral ,double door, sheet steel, enclosure powder coated with 200 Amps rated busbar with neutral link, 8 ways , fixed on wall duly grouted in solid block wall or on wooden board with electrical connection complete all as specified and directed. Make: Schnieder/GE/C&S.

M & L Sub main wiring with two run single core 4 Sqmm FRLSH copper conductor cable PVC insulated, unsheathed, 1100 V including 20 mm dia concealed on wall/ceiling in ISI marked with all accessories such as Tees, elbows, junction boxes etc, as required fixed on wall alongwith one run of 4 Sqmm single core PVC FRLSH insulated unsheathed copper conductor cable as continuous earth wire and connecting to existing main switch board / distribution board and testing on completion inculding taking down old wiring etc complete all as directed.Note: (i) Two runs of 4 sqmm and one run of 4 sqmm cable and one run of PVC conduit shall be measured as one RM.

M/S Surendra Prasad and Associates (BID ID -3402753)

S K Construction (BID ID -3400845)

M/S U.K ENTERPRISE (BID ID -3402914)

MS HO Shadap (BID ID -3402103)

M/s SS Engineering (BID ID -3402892)

M/S Mani Construction (BID ID -3403015)

M/S K.B.VENTURES PVT LTD (BID ID -3402488)

M/s A L Traders (BID ID -3402705)