Day to Day maint of MES colony at chopra shop and key pers Qtrs at Tawi complex and certain B/R repair and allied works to water supply installation under GE(Utilities) Udhampur.

Amount

Taking down chowkats or frames with shutters (without taking off shutters from frames) area exceeding 1.50 square metre and not exceeding 4.0 square metre each, and removing from site, including cutting holes for taking out hold fasts or dismantling brick work (holes cut and any other damage to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost to Govt.), complete all as specified and directed by Engr-in-Charge.

Taking down chowkat or frames with shutters (without taking off shutters from the frames) n.exc 1.5 Sqm each and removing from site, including cutting holes for taking out hold fasts, dismentaling brick work (holes cut and any other damages to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost) complete all as specified and directed by Engr-in-Charge.

Taking down shutters of any description exceeding 1 square metre but not exceeding 2 Sqm each and removing from site, complete all as specified and directed by Engr-in- Charge.

Taking down and refixing shutters of any description exceeding 1.00 Sqm and not exceeding 2.00 Sqm each in same opening, complete all as specified and directed by Engr-in-Charge.

35mm thick flush door shutters, solid core construction, with block board core and decorative laminates of approved colour and pattern on both faces complete all as specified and directed by Engr-in-Charge.

2nd class hard wood (sal/hollock), glazed and skelton shutters 35mm thick, open rebated and prepared to receive glass, gauge,etc; (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut & mitred beads for securing glass etc; sizes of members of shutters as specified in SSR Pt-I Section 8.24(a) supplied and fitted to chowkhats complete including fixing only iron mongery such as tower bolt, handle, hinges, aldrop bolt etc; complete all as specified and directed by Engr-in-Charge.

Factory made solid PVC door frame of size 50mm x 47mm made out of 5mm wall nut colour PVC sheet reinforced with MS square tube complete all as specified and directed by Engr-in-Charge.

Factory made PVC moulded door Shutter of wall nut colour, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, with particle board core, fix in frame at site as per specification & drawing, complete all as specified and as directed by Engr-in-Charge.

Pressed steel frames for doors with one or more rebates including necessary supply and fixing lugs, hinges, lock strike plate etc. complete , of frame size 105 x 60 mm, including one shop coat of red oxide zinc chrome primer complete all as specified and directed by Engineer-in Charge.

Pressed steel frames of frame size 125 x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc; complete including one shop coat of red oxide zinc chrome primer complete all as specified and directed by Engineer-in-Charge.

Powder coated (of approved colour) aluminium sections as in frame & shutter of windows, ventilators as in sliding/ openable/ louvers/ fixed type with and including necessary rolling for smooth moving & locking arrangement, etc; fixed to wall including, preparation of disturbed portion both side (internal & external surfaces of wall) match with existing surface treatment and all sides of aluminium frame shall be sealed with silicon sealent (inner/outer face) complete all as specified as directed by Engr-in-Charge. Make: JINDAL/ HINDALCO/ INDALCO. Note: Rates includes for necessary roller for sliding window / ventilators,etc;. Actual per RM weight of diffrent section as brought by contactror shall be verified by Engr-in-Charge.

Framed work such as grills, gratings, coller stand, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work including welding con- forming to Fe.290, Gde-E-165 complete all as specified and directed by Engr-in-Charge.

Powder coated aluminium handles of size 100mm long, fancy type in built with locking arrangement for aluminium windows fixed with screws to window shutters, complete all as specified and directed by Engr-in-Charge.

Powder coated aluminium hinges suitable for aluminium openable windows 100 mm long match with ventilator/ window shutters fixed with screw complete all as specified and directed by Engr-in-Charge.

Powder coated aluminium tower bolt, 150mm long match with window shutters fixed with screws, complete all as specified and directed by Engr-in-Charge.

5mm thick froasted/ tinted sheet glass, ordinary quality and glazing with rubber neoprene packing for aluminium doors /windows in square/ rectangular exc. 0.5 sqm in each pane, complete all as specified and directed by Engr-in-Charge.

5mm thick froasted/ tinted sheet glass, ordinary quality and glazing with rubber neoprene packing for aluminium doors/ windows in square/ rectangular not exc. 0.5 sqm in each pane, complete all as specified and directed by Engr-in-Charge.

5mm thick printed colour PVC sheet as in aluminium window/ partition fixing with rubber neoprene packing and powder coated aluminium beading, complete all as specified and directed by Engr-in-Charge.

Aluminum handles cast type, anodised, 150mm size complete all as specified and directed by Engr-in-Charge.

150mm long aluminium handle ( in repair), cast type, anodised complete all as specified and directed by Engr-in-Charge.

Mild steel cold rolled butt hinges, medium weight 100 mm long (in repair) including fixing and welding to pressed steel/ wooden door frame if required complete all as specified and directed by Engr-in Charge.

300mm mild steel ordinary rat tail rod pattern spring (in repair) including roller plate complete all as specified and directed by Engr-in-Charge.

Mild steel continuous piano hinges, bright finish or electro galvanised, width of flap when open 30mm, complete all as specified and directed by Engr-in-Charge.

200mm long aluminium anodised barrel tower bolts (in repair) of extruded section, complete all as specified and dircted by Engr-in-Charge.

200mm aluminium, anodised, barrel tower bolts of extruded section and fixed, complete all as specified and directed by Engr-in-Charge.

100mm long aluminium anodised hasp and staple complete all as specified and directed by Engr-in-Charge.

100 mm long aluminium anodised hasp and staple (in repair ) complete all as specified and directed by Engr-in-Charge.

Chromium plated tubular towel rail (in repair), 20mm dia, D type, 60cm long between flanges complete all as specified and directed by Engr-in-Charge.

CP Towel Ring 200mm dia fixed in repair complete all as specified and directed by Engr-in-Charge. Make:-Jaquar, AQN-7721, Cera-F 5002105 or any equivalent make approved by GE.

Glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated brackets, guard and railing 60cm long fixed in repair complete all as specified and directed by Engr-in-Charge. Make :- Jaquar cat part No. AKP-35771P, Cera-F 5001114 or any equivalent make approved by GE.

Corner Glass self ( With CP brackets) 225 x 225 mm complete all as specified and directed by Engr-in-Charge. Make: - Jaquar cat part No. CAN-1173, Cera- F 5005102 or any equivalent make approved by GE.

Aluminium alloy sliding door bolt (in repairs) 250 mm long with hasp, staple ( bolt type) and fixing clips of sheets, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy, complete all as specified and dircted by Engr-in-Charge.

Aluminium alloy sliding door bolt 250 mm long with hasp, staple ( bolt type) and fixing clips of sheets, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy, complete all as specified and dircted by Engr-in-Charge.

300mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed by Engr-in-Charge.

Rolled mild steel work of angle iron as in frames of doors & cup board etc; conforming to grade Fe 410-O or Fe-310-O complete all as specified and directed by Engr-in-Charge.

18/19 mm thick prelaminated particle boards (in repair) bothsides with decorative choice laminations, grade-2 quality, interior grade, commercial type, fixed with screws as in shelves and shutters of cup board exposed face fixed with 20x6mm thick teak wood beading complete all as specified and directed by Engr-in-Charge.

Stainless steel wire cloth, cut to size, 0.36 mm nominal dia wire and average width of aperture 1.40 mm and fixed with tinned tacks or galvanised wire staple complete all as specified and directed by Engr-in-Charge.

Stainless steel wire cloth (in repair) 0.36 mm nominal dia of wire and average width of aperature 1.40 mm and fixed with stainless steel staple complete all as specified and directed by Engr-in-Charge.

2nd class soft wood beads, straight (any size) for glazed or gauzed joinery, renewed, including miters etc.complete all as specified and directed by Engr-in-Charge.

Hacking out old broken glass panes (any thickness size, quality or description) from metal frames including punching or drilling out old glazing pins/ spring clips complete all as specified and directed by Engr-in-Charge.

4mm thick sheet glass, ordinary quality and glazing with oil putty or wooden beads in squares not exceeding 0.50 Sqm in each pane fixing in glass (any height/ any stories without any financial effect) complete all as specified and directed by Engr-in-Charge.

4mm thick figured glass, pin head type and glazing with oil putty in squares not exceeding 0.5 sqm in each pane complete all as specified and directed by Engr-in-Charge.

2nd class hard wood small fittings such as shaped door & window stops, cleat (in repair) including all necessary labours, articles not exceeding 200 cubic centimeter each complete all as specified and directed by Engr-in-Charge.

Door seal Aluminium 900 mm long (in repair) complete all as specified and directed by Engr-in-Charge.

Checking of joinery (wooden/ steel) iron/ aluminium mongery, pelmet box, door springs etc; requiring carpentry work and carrying out minor repairs such as tightening of screws/ nails, fixing glass panes, minor adjustment of joinery, door etc. including petty repairs material like screws/ nails, plug etc; to make it functional complete all as specified and directed by Engr-in-Charge. Note: Any items required to be replaced shall be paid under respective items.

Checking and attending to water leakage from taps, flushing cisterns, wash hand basins and other sanitary fittings/ fixtures and any obstruction to water supply, requiring plumber work and carryout minor repairs such as replacement of washers, check nuts, tightening of fittings of flushing cistern etc; including petty materials like washers of all sizes, thread (shoot), M-seal, screws, nails and white cement to make water supply/ plumbing lines functional and leak proof complete all as specified and directed by Engr-in-Charge. Note : Any items required to be replaced shall be paid under respective items.

Vitreous china, white, wash hand basin, flat back of size 550x400mm, white including MS brackets and pedestal pattern including cutting for and pinning including 32mm dia CP brass waste coupling and PVC waste pipe, fixed in repair complete all as specified and directed by Engr-in-Charge. Make :-CERA cat part No. S 2040105 for WHB & for pedestal cat part No.S 2090101, Jaquar- SLS-WHT-0611F for WHB and SLS-WHT-1510 for pedestal or Hindware approved make as approved by GE.

PVC low level flushing cistern 10 ltrs capacity, valveless, syphonic action type, white, with inlet, ball valve, float and handle including brackets, PVC 32mm dia flushing pipe etc., fixed in repairs, complete all as specified and directed by Engr-in-Charge. Make:-CERA cat part No.B1020101, Jaquar or hindware or any other equivalent make as approved by GE.

Powder coated mild steel conduit pipe 25mm bore (Drapery rod) with a pair of PVC coated MS clamps to hold drapary rod and decorative attachment at both ends of drapary rod, fixed to opening of door/ windows, (fixed in repair) with a pair of clamps and a pair of side ornamental attachments), complete all as specified and directed by Engr-in-Charge.

Stainless steel 25mm dia (curtain rod) with fixing of domes, with stainless steel brackets etc; complete all as specified and directed by Engr-in-Charge.

Sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including waste coupling and waste pipe & bedding in CM to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 1040mmx 510mmx 203mm, bowl size 510mmx405mmx203mm, fixed in repair, complete all as specified and directed by Engr-in-Charge. Make: Prayag, Cat No. 1244D of prayag or any other equivalent make as approved by GE.

Sink made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes coupling , inlcuding bedding in cement mortar to dwarf wall or including fixing cantilever brackets, PVC waste pipe and connecting union to pipe overall size 495mm x 420mm, bowl size 410mm x 330mm x 160mm, complete all as specified and directed by Engr-in-Charge.

Stainless steel peg sets of six pegs of standard quality fixed with brass screws as approved by Engr-in-Charge and fixed etc; complete all as specified and dircted by Engr-in-Charge.

Pillar taps , cast copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe of bore 15 mm (in repair) complete all as specified and directed by Engr-in-Charge.

PVC flexible connections, 450mm long 15mm dia with brass flange nuts & washers complete all as specified and directed by Engr-in-Charge. Make :- Jaquar, cat part No. ALD-805B/ Cera-CG 107 any other equivalent make as approved by GE.

PVC flexible connections, 600mm long 15mm dia with brass flange nuts & washers complete all as specified and directed by Engr-in-Charge. Make -Jaquar, cat part No. ALD-801B any other equivalent make as approved by GE.

Waste fittings brass chromium plated for glazed ware sink, sink coupling, basins etc; with long screwed shank and fly nuts, flanged end bedded in red lead cement and other end fixed 32mm dia (in repair) complete all as specified and directed by Engr-in-Charge.

CP brass grating 100mm dia centre hole (in repair) complete all as specified and as directed by Engr-in-Charge. Make:- Prayag Cat No. FT-70 any other equivalent make as approved by GE.

32/40 mm dia and 750mm long PVC waste pipe (in repair) for WHB/sink complete all as specified and directed by Engr-in-Charge.

Taking up or down steel tubing of bore 15mm with connections for cleaning for refixing or removing to storeyard complete all as specified and directed by Engr-in-Charge.

Steel water tubing of nominal bore 15 mm, medium grade, galvanised with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings (such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) complete all as specified and directed by Engr-in-Charge.

Fixing only Steel water tubing 15mm dia, medium grade, galvanised with all fittings and fixtures complete to wall and ceiling or laid in floors complete all as specified and directed by Engr-in-Charge.

Plastic water closet seat, white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device (in repair) complete all as specified and directed by Engr-in-Charge.

Bib Tap of PTMT, any colour 15mm dia (in repair) complete all as specified and directed by Engr-in-Charge. Make: Prayag or any other equivalent make as approved by GE.

Brass CP, shower rose 125mm size (in repair ) complete all as specified and directed by Engr-in-Charge.

Disconnecting existing tanks, setting aside (or lowering if required) for repairs , cleaning etc; and hoisting if required reconnecting and refixing in position of capacity execeeding 250 ltrs and not exceeding 500 litres and removing to stores, complete all as specified and directed by Engr-in-Charge.

Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) of 500 litres capacity (Tripple layer) white in colour including water tank cover (internaly/interlocking arrangment for water tank cover), hoisted and fixed in position including tank nipple inlet & outlet and connecting up pipes complete all as specified and directed by Engr-in-Charge.

Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) of 1000 litres capacity (Tripple layer) white in colour including water tank cover (internaly/interlocking arrangment for water tank cover), hoisted and fixed in position including tank nipple inlet & outlet and connecting up pipes complete all as specified and directed by Engr-in-Charge.

Stop valves, brass, fancy type with flange, chromium plated with long shank and cup (concealed type), screwed down high pressure, with capstan head handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed by Engr-in-Charge. Make : Jaquar cat part No.CQT-23083, Cera- F 1014751 for exposed part & F 4060102 for consealed part or any other equivalent make as approved by GE.

Gun-metal, globe or gate valves, 20mm bore, with iron wheel head, screwed both ends for iron pipe and fixed, complete all as specified and directed by Engr-in-Charge.

Angle valve, brass, chromium plated, fancy type, with capstan head handle screwed down high pressure, including CP brass wall flanges; screwed for 15mm bore pipe connection (fixed in repairs) complete all as specified and directed by Engr-in-Charge. Make : Jaquar cat part No- CON-053KN, Cera- QTF 2006201any other equivalent make as approved by GE.

Bib taps, brass, chromium plated, fancy type, long nose, with capstan head handle screwed down high pressure, including CP brass wall flanges; screwed for 15mm bore pipe connection (fixed in repairs) complete all as specified and directed by Engr-in-Charge. Make : Jaquar cat part No.- CON-037KN, Cera-QTF 2006152 any other equivalent make as approved by GE.

Shower rose, brass, chromium plated, with CP arm 120mm dia with or without swivel joint, with & including CP brass arm and wall flange, fixing to steel pipe or union (in repair) complete all as specified and directed by Engr-in-Charge. Make : Jaquar cat part No. OHS-1719, Cera- F 7040101 for arm & F 7020305 for shower rose any other equivalent make as approved by GE.

Health faucet, brass, chromium plated, with 1000mm long 8mm dia chrome finish flexible pipe with wall hook, fixed in repair complete all as specified and directed by Engr-in-Charge. Make - Jaquar cat part No- ALD-573, Cera- F 8030103 or any equivalent as approved by GE.

Jet spray, brass, chromium plated, heavy duty, including flexible pipe suitable for 15mm bore water connection; for EWC (fixed in repair) complete all as specified and as directed by Engr-in-Charge. Make : Jaquar, Cera or any other equivalent make as approved by GE.

Demolition of brick work or stone /boulder masonry, built in cement mortar, including all quoins, arches, pillars etc but excluding ashlar facing, dressed stone work and precast concrete articles etc, complete all as specified and directed by Engr-in-Charge.

Brick work with sub class 'B' bricks straight or curved on plan, exceeding 6 m mean radius with old size bricks, built in cement mortar 1:6, complete all as specified and directed by Engr-in-Charge.

All as per serial item No 78.00 here-in-before but except bricks, complete all as specified and directed by Engr-in-Charge. Note : Old serviceable bricks obtained against demolition shall be reused.

Taking down cement plaster, any description on brick or stone or cement concrete walls including raking out joints, hacking for key, scrubbing down with water complete all as specified and directed by Engr-in-Charge.

Rendering 15mm thick in cement mortar 1:4 on fair faces of bricks work/concrete surface finished the surface even and smooth (without using extra cement) with and including mixing of water proofing compound complete all as per manufacture's instructions and directed. (Note- WPC shall be measured and paid separately under relevent items) as on walls complete all as specified and directed by Engr-in-Charge. Note :- Plaster shall be carried out upto any height in patches and contractor shall have no claim for height and scaffolding what so ever is required to complete the work.

Rendering 15mm thick in cement mortar 1:6 on fair faces of bricks work/concrete surface finished the surface even and smooth(without using extra cement) as on walls complete all as specified and directed by Engr-in-Charge. Note :- Plaster shall be carried out upto any height in patches and contractor shall have no claim for height and scaffolding what so ever is required to complete the work.

10mm thick rendering on fair faces of brick/ concrete surfaces as in ceiling in cement mortar 1:3 and finished even and smooth without using extra cement complete all as specified and directed by Engr-in-Charge.

Two coats of oil bound distemper on walls after preparation of newly plastered surfaces over a coat of white primer, complete all as specified and directed by Engr-in-Charge.

Three coats of white wash on ceiling including preparation of newly plastered surfaces complete all as specified and directed by Engr-in-Charge.

Two coats of cement base paint on walls after preparation of newly plastered surfaces over a coat of white primer, complete all as specified and directed by Engr-in-Charge.

Supply only integral water proofing compound as per latest IS specification complete all as specified and directed by Engr-in-Charge.

15mm thick cement plaster on fair face of concrete surface in CM 1:4, finished even and smooth without using extra cement over and including brushing with neat cement slurry @3Kg of cement per Sqm complete all as specified and directed by Engr-in-Charge.

Demolition of cement concrete (unreinforced) as in roofs of existing water proofing treatment of any type and any thickness and preparing RCC roof slab top by wire brushing and cleaning the dust and foreign material etc; complete and applying a coat of hot blown bitumen 85/25 grade @ 1.20kg/Sqm over a coat of bitumen primer @ 0.40 ltrs/Sqm and there after laying of a layer of APP based polymeric membrane (five layered with centre core as 100 microns high molecular high density polyethylene film) weighing not less than 3.5 kg/Sqm and reinforced with polyster non woven fabric (wt. not less than 150 gms/sqm) laid on bituminous surface by press application method with 75mm side overlap and 100mm end overlap. The membrane has to be laid with LPG torch application and overlaps sealed and finished neat, after that applying one coat of bitumen 85/25 grade on top surface @ 1.20 kg/Sqm and blinded with premier dry sand @ 0.5 kg/Sqm dusted over bitumen coat, complete all as specified and directed by Engr-in-Charge.

Preparing treated roof surface and applying two coats of aluminium paint over roof treatement complete all as specified and directed by Engr-in-Charge.

Demolition of cement concrete (unreinforced) in ground floor and in paving not exceeding 15 cm thickness (below or above ground level) complete all as specified and directed by Engr-in-Charge.

50mm thick plain cement concrete, M-10 (1:3:6), type C-2 (using 40mm graded aggregate) as in plinth protection, finished fair & even without using extra cement, complete all as specified and directed by Engr-in-Charge.

Dismantling floor, hearth or wall tiling including CM bedding but not backing, removing serviceable tiles to store and rubbish off the premises complete all as specified and directed by Engr-in-Charge.

Glazed ceramic coloured tiles 300mm x 200mm x 7mm thick as in vertical surfaces such as skirting dado etc; set and jointed in neat cement slurry, pointed in white or coloured cement to match over and including 10mm thick rendering in cement mortar 1:4 to receive tiles, complete all as specified and directed by Engr-in-Charge.

Non skid coloured ceramic tiles 7 to 8 mm thick, area of each tiles exc. 0.06 SQM and but n.exc. 0.11 SQM in floor etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over 15mm thick screed bed in CM 1:6, complete all as specified and directed by Engr-in-Charge.

Non skid coloured 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over 15mm thick screed bed in CM 1:6, complete all as specified and directed by Engr-in-Charge.

All as per serial item No 96.00 here-in-before but on skirting over vertical surfaces & including 10 mm thick cement mortar 1:4 screed, set and jointed with grey cement slurry and pointed in grout of matching shade of tiles complete all as specified and directed by Engr-in-Charge.

Vitrified ceramic tiles 10 mm thick Double charged (Square/Rectangular) polished, area of each tiles exc. 0.36 sqm but not exceeding 0.42sqm in floors etc; set and jointed in neat cement slurry over 15 mm thick screed bed in CM (1:6) complete all as specifiedand directed by Engr-in-Charge.

All as per serial item No 98.00 here-in-before but as in skirting over vertical surfaces & including 10 mm thick cement mortar 1:4 screed, set and jointed with grey cement slurry and pointed in grout of matching shade of tiles complete all as specified and directed by Engr-in-Charge.

20mm thick Granite (of any type) work (table rubbed and polished and moulding of outer edges) in steps, jambs and pillars, window cills, cooking platforms and the like including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite with and including 15mm thick screed bed in CM 1:6, complete all as specified and directed by Engr-in-Charge.

Two coats of synthetic enamel paint on new wooden surfaces including preparation of newly wooden surfaces over a coat of pink primer, complete all as specified and directed by Engr-in-Charge.

Two coats of synthetic enamel paint on new steel surfaces including preparation of newly steel surfaces over a coat of red oxide primer, complete all as specified and directed by Engr-in-Charge.

PVC tank cover suitable for tanks 500 & 1000 Ltrs tank (in repair) including securing with MS binding wires, complete all as specified and directed by Engr-in-Charge.

Note for serial item No 1 to 103: - (i) Contractor or his rep will report at complaint cell/office in the morning by 9:00 Hrs to receive day to day complaints. (ii) Complaint should be attended /completed within 48 Hrs after receiving complaint slip failing which panelty of rate 500/complaint will be recovered from the contractor's dues or become dues. (iii) Debris materials obtained from demolition/dismantling shall be removed from the site, outside Md land, failing which a panel recovery from contractor Rs 500.00 per cum will be recovered from contractor dues or become dues. (iv) The cost of above operation as stated in Notes serial No (i) to (iv) shall be deemed to be included in quoted rates & nothing extra shall be paid on this account.

Walling of random rubble stone masonry uncoursed with best quality locally available harder stones such as granite, trap, basalt stone etc, wellbonded bedded and solidly hearted, built in cement mortar 1:6, complete all as specified and directed by Engr-in-Charge.

All as per serial item No 104.00 here-in-before but except stones, complete all as specified and directed by Engr-in-Charge. Note : Old serviceable stones obtained against demolition shall be reused.

Dismantling of wrought iron or mild steel work of any description not otherwise provided for, complete all as specified and directed by Engr-in-Charge.

Rolled mild steel work as in roof trusses(framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing(Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc conforming to grade Fe-410 W(Gde-E-50) quality-A, steel work duly painted with one shop coat of zinc chromate primer incl preparation of surfaces complete all as specified and directed by Engr-in-Charge.

Rolled mild steel plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, with riveted, bolted or welded attachment conforming to grade Fe.290.Gde-E-165, steel work duly painted with one shop coat of zinc chromate primer including preparation of surfaces complete all as specified and directed by Engr-in-Charge.

Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof covering complete all as specified and directed by Engr-in-Charge.

Prepainted galvalume aluminium zink coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed by Engr-in-Charge.

Prepainted galvalume aluminium zink coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed by Engr-in-Charge.

Dismantling Asbestos cement (corrugated,semi corrugated, etc) sheets in roof coverings complete all as specified and directed by Engr-in-Charge.

6mm thick asbestos cement corrugated or semi corrugated sheets in roofs, walls etc fixed with L-type or J-type of cranked hook bolts complete all as specified and directed by Engr-in-Charge.

All as per serial item No.113 here-in-above but except sheets.

Asbestos cement one piece plain angular ridge 6mm thick fixed with L-type or J-type or cranked hook bolts complete all as specified and directed by Engr-in-Charge.

Bitumastic gola, with 80/25 bitumen and coarse sand mixture 1:3 by weight, 8cmx8cm at the junction of roofing to vertical surfaces complete all as specified and directed by Engr-in-Charge.

Factory made, 2nd class hard wood (sal/hollock), plain framed, panelled shutters (two panels) with lock rail and panel of 9 mm BWP commercial ply or 12 mm veneered particle board with commercial veneering on both sides, the side of rail and stile as per IS-1003 (Part-I), kiln seasoned and chemically pressure treated, 35 mm thick complete including fixing only iron mongery such as tower bolt,handle,hinges,aldrop bolt etc complete all as specified and directed by Engr-in-Charge.

Steel window (box type) factory made with sidehung shutter including pintol hinges, steel handles, steel peg stay and all locking arrangement complete with glazing bars dovetailed or welded including one shop coat of red oxide primer complete all as specified and directed by Engr-in-Charge. Note : (i) The window shall be fabricated as per Drg No CEUZ/TD/1269/2008 Sheet 1/3 to 3/3. (ii) MS fillets, glazing wire gauge shall be measured and paid seprately.

All as per serial item No. 118.00 here-in-before but without glazing bar complete all as specified and directed by Engr-in-Charge. Note : (i) The window shall be fabricated as per Drg No CEUZ/TD/1269/2008 sheet 1/3 to 3/3. (ii) MS fillets, glazing, wire gauge shall be measured and paid seprately.

Aluminum anodised barrel tower bolts of extruded section with 150 mm long bolt complete all as specified and directed by Engr-in-Charge.

100mm long Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed complete all as specified and directed by Engr-in-Charge.

200 mm long mild steel barrel tower bolts, stove enameled black, with bright bolt complete all as specified and directed by Engr-in-Charge.

200 mm long mild steel barrel tower bolts, stove enameled black (in repair) with bright bolt complete all as specified and directed by Engr-in-Charge.

Mild steel sliding door bolt plate type 250 mm long stove enameled black with bright bolt not less 12 mm dia bolt with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate, complete all as specified and directed by Engr-in-Charge.

Mild steel sliding door bolt plate (in repair) type 250 mm long stove enameled black with bright bolt not less 12 mm dia bolt with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate, complete all as specified and directed by Engr-in-Charge.

Mild steel sliding door bolt plate type 300 mm long stove enameled black with bright bolt not less 12 mm dia bolt with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate,complete all as specified and directed by Engr-in-Charge.

Mild steel sliding door bolt plate (in repair) type 300 mm long stove enameled black with bright bolt not less 12 mm dia bolt with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate, complete all as specified and directed by Engr-in-Charge.

Expanded metal exceeding 4.00kg per sqm cut to length, bent to shape and welded with MS angle iron frame, complete all as specified and directed by Engr-in-Charge.

100 mm thick plain cement concrete M-15 (1:2:4), type B-2 ( using 40mm graded aggregates) as in path etc; finished even and smooth w/o using extra cement complete all as specified and directed by Engr-in-Charge.

Roughening surfaces of old concrete surfaces by picking, sweeping clean and washing down with water to remove dust etc complete all as specified and directed by Engr-in-Charge.

Brushing neat cement slurry with 3.00kg of cement per sq.metre complete all as specified and directed by Engr-in-Charge.

Glossy finished chequered coloured cement concrete tiles 30cmx30cmx30mm thick, machine pressed, factory made, set jointed and pointed in neat cement slurry, laid in floor with grey cement and pigment complete all as specified and directed by Engr-in-Charge.

Machine pressed precast concrete interlocking pavor block 50% grey and 50% coloured, any shape and size, conforming to IS 15658-2006 of 60mm thicknes, M-35 over and including 75mm thick PCC, type D-2, M-7.5(1:4:8) and 25mm thick sand cushioning complete all as specified and directed by Engr-in-Charge.

Two coats of cement base paint over a coat of alkali resistant priming paint over old plastered surfaces of wall including preparing surfaces after conplete removal of existing treatment upto 5-10 m height from ground level and at all locations as directed including , scaffolding, cleaning and curing etc. complete all as specified and as directed by Engr-in-Charge.

Preparation of old plastered/ unplastered wall surfaces and applying one coat of oil bound distemper (including wahsing, rubbing down and stopping of distempered and painted surfaces), complete all as specified and directed by Engr-in-Charge.

Preparation of old plastered/ unplastered wall surfaces and applying one coat of white wash, complete all as specifed and directed by Engr-in-Charge.

Ball valves (in repair) of size 20mm bore dia high pressure of PTMT (Make-Prayag) with epoxy coated aluminium rod and high density plastic ball (Minimum weight not less than 210 gms) screwed for iron pipe and fixed including necessary fitting as reqd at site complete all as specified and directed by Engr-in-Charge.

Ball valves (in repair) of size 15 mm bore dia high pressure of PTMT (Make-Prayag) with epoxy coated aluminium rod and high density plastic ball (Minimum weight not less than 210 gms) screwed for iron pipe and fixed including necessary fitting as reqd at site complete all as specified and directed by Engr-in-Charge.

Precast cement concrete jallies 25mm thick (measured solid) set in cement mortar 1:4 including all moulding and necessary form work, complete all as specified and directed by Engr-in-Charge.

Repairs to existing steel rolling shutters without ball bearing by taking down top cover, anchoring rod, spring etc and providing new springs and anchoring rod, replacing the worn out strips, safety lever lock of shutters and welding of handle, hasp staple and other broken articles etc, greasing the spring, guide rail, shaft etc and making functional and errecting in position, including refixing of top cover/hood etc, and refixing in same opening and making good in CM 1:3/PCC to match the existing surface, opening n.exc. 10 sqm each and finally painting with two coats of synthetic enamel paint, complete all as specified and directed by Engr-in-Charge.

PVC Flex Printed Sign Board made on 3 mm thick aluminum sheet exc 1.0 sqm and n.exc 6.0 sqm ,with printed name of installation ,office and symbol ,logo etc with supported circular GI steel section frame of size 25 mmx25mmx1.29 mm thick along with proper clamping with nut bolts or welding complete all as specified and directed by Engr-in-Charge.

Manufacturing supplying and fixing directional reflective type with vinyl background sign boards made out (stainless steel grade 302) S.S square section 40x40x3.0mm. Frame size 0.90x0.60m and height from ground level 1.5m and 0.60m in ground including embeded with pcc 1:2:4 pot hole size 0.30x0.30x0.60m including excavation earth work & removing excavated soil to a distance n. exc. 50m and 3mm thick aluminium sheet ,face to be fully covered with reflctive sheeting conforming to type-IV of ASTM-D 4956-01 in blue and silver white or other colour combination with suitable size aluminium alloy rivets @20cm c/c to back support frame of (stainless steel grade 302) s.s square section 40x40x3.0mm alongwith anti theft resistant measures complete all as specified and directed by Engr-in-Charge.

ITEMS FOR RCC OVERHEAD TANKS Preparation of old plastered surfaces of walls and soffits of RCC over head tank and applying one coat of cement base paint (including washing, rubbing down and stopping of distempered and painted surfaces), complete all as specifed and directed by Engr-in-Charge. Note :- Painting shall be carried out upto any height and contractor shall have no extra claim for height and scaffolding what so ever is required to complete the work.

Preparation of old plastered or unplastered surfaces of walls and soffits of RCC over head tank and applying one coat of anti-fungal acrylic emulsion paint (Appex) any tinted, complete all as specified and directed by Engr-in-Charge. Note :- Painting shall be carried out upto any height and contractor shall have no extra claim for height and scaffolding what so ever is required to complete the work.

Preparation of old painted steel surfaces of any description not otherwise described not exceeding 10 cm width or girth and applying one coat of synthetic enammel paint, complete all as specified and directed by Engr-in-Charge. Note :- Painting shall be carried out upto any height and contractor shall have no extra claim for height and scaffolding what so ever is required to complete the work.

Cement concrete 1:3:6 type C-0 using 12.5mm graded crushed stone aggregates for filling in the pressed steel door frame/hold fast complete all as specified and directed by Engr-in-Charge.

SODHI TRADING CORPORATION

RAMAN CONSTRUCTION CO