REPAIR MAINT OF STREET LIGHT, SECURITY LIGHT, SOALR STREET LIGHT AND ALLIED WORKS AT FAIZABAD CANTT UNDER GE FAIZABAD

Amount

Excavation in trenches, not exceeding 1.5 meter wide and not exceeding 1.5 meter in depth for foundation of poles, stays or for taking out/laying of cables and getting out in soft/loose soil complete all as specified and directed by Engr-in-Charge.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in soft/loose soil complete all as specified and directed by Engr-in-Charge.

Removing excavated materials (soil) n.exc 50 m and depositing where directed at a level n.exc 1.5m above the starting point complete all as specified and directed by Engr-in-Charge.

Supply and laying river sand for cushioning of cables with layers of sand 8 cm before lying of cable and 15 cm after lying of cable (total 23 cm) in trenches complete all as specified and directed. Note: Thickness of sand cushioning shall be measured as 18cm after punning for payment purpose.

Supply & Laying old size sub class 'B' bricks locally available best quality, laid flat (length of bricks laid across the length of cable) in tranches for protection of U/G cable complete all as specified and directed by Engr-in-Charge.

Supply & laying steel GI tubing of following sizes, light grade, for passing LT/HT cable under road or PCC floor or fixed to wall / on pole or across the drain etc or whenever protection is required including necessary clamps and nut bolts with GI fittings complete all as directed and specified:-

GI Pipe 25 mm dia.

GI Pipe 50 mm dia

Supplying, laying, commissioning & testing LT underground cable 1100 volts grade, XLPE insulated, PVC sheathed heavy duty, armoured with multi stranded aluminium conductor all as per IS 7098 (Part-I) 1998, laid in trenches, ducts, pipes or on poles etc including cable glands, cable lugs, jointing, supporting clamps etc of the under mentioned type and sizes complete all as specified and directed by Engr-in-Charge.

4 Sqmm 2 core

10 Sqmm 2 core

S&F in repair, 4 Sqmm size 1100 Volts grade heavy duty cable PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including 4mm suspension wire, one twin core cable flat or circular of twin core flat or round sheathed stranded aluminium conductor cable complete all as specified and directed by Engr-in-Charge.

All as per Sl item No. 8.00 above but size of cable 6 Sqmm.

All as per Sl item No. 8.00 above but size of cable 10 Sqmm.

Labour for cutting/ trimming of tree branches up to 80 mm thickness along the alignment of LT /HT over head electric line which are going/ touching or falling or ACSR conductor/ poles or near by sub stations etc at any height from GL and making at least 1.50 m clearance form conductor and removing to a distance up to 100 mtr where directed by Engineer-In-Charge. Note:- (i) Trimming of the branches on one side of the conductor as required at site. (ii) Actual length of cutting shall be measured. (iii) The distance as motioned above shall be maintained during contract current period & same location subject to at least 6 months period between two trimming / leaping. (i) Measurement shall be taken including all conductors as one length only.

S&F in repairs, PVC junction box of size 280x235x135mm including 2 Nos aluminium bus bar of 2mm thick duly fitted on the suitable insulator with fixing with 35x6mm ms flate iron with nut bolt and washer and incl one MCB SP 6 amp with rail fitted in ms box incl suitable size cable hole,gland duly painted with one coat of aluminium paint over a coate of red oxide etc complete all as specified and directed by Engr-in-Charge. Make M/s Sintex Industries Ltd. Cat Part No. GSJB-3126 or other equivalent and approved

Dismantling of old earthing of any description and M&L for new earthing complete with galvanized steel plate electrode 600 mm x 600 mm x 6 mm thick, burried directly in ground vertically in pit of depth not less than 2.25 metre below normal ground level with top edge of the earth plate at a depth not less than 1.5 metre below normal ground level surrounded from all sides with mixture of charcoal and common salt in alternate layers and electrode connected to GI earthing wire 4mm dia size by means of GI bolts, nuts, check nuts and washers, earthing wire protected by GI pipe 20 mm bore (light grade) connected to main switch board or any other electrical equipment all as shown in electrical plate No. 3 of SSR-2009 Part I and including necessary excavation and earth work in any type of soil, 20 mm bore medium grade GI pipe for watering, funnel with wire mesh, PCC (1:3:6) type C1 in chamber of size not less than 300x300x300mm (internal diamentions) with cover made of RCC (1:2:4), type B-1, reinforced with 8 mm dia TMT bars @ 15 cm C/C both ways and angle iron 40X40X5mm frame etc duly painted with two coats of synthetic enamel paint over a coat of red oxided primer on exposed surfaces complete all as specified and directed by Engineer-in-Charge. Note: The unit rate includes earthing wire and protection pipe upto maximum 7.5 metre from earth plate, earth point / test point.

S&F in rrepair, LED street light fitting 120 Watt 230 Volt AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete. all as specified and directed by Engr-In-Charge.

All as per Sl Item No. 14.00 above but of size 100 Watt

All as per Sl Item No. 14.00 above but of size 60 Watt

All as per Sl Item No. 14.00 above but of size 45 Watt

All as per Sl Item No. 14.00 above but of size 30 / 35 Watt

S&F in repair, LED outdoor drivers suitable for LED street light 25 Watt to 45 Watt all as specified and directed by Engr-In-Charge.

S&F in repair, LED outdoor drivers suitable for LED street light/flood light 100 Watt all as specified and directed by Engr-In-Charge.

S&F in repair, LED flood light 100 watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp. all as specified and directed by Engr-In-Charge.

S&F in repair, Garden/ Gate light Decorative made up of high grade unbreakable polycarbonate material powder coated including one LED lamp 14W/20W B22 base and fixed with suitable dia & height light grade GI Pipe complete all as specified and directed by Engr-in-Charge. Make- Havells Cat Part No :- CORALMINIPT15WLED757PSY MTOPC or equivalent to Bajaj/ Philips/ CG.

S&F in repair, Garden/ Post light Decorative made up of high grade unbreakable polycarbonate material powder coated including one LED lamp 14W/20W B22 base and fixed with suitable dia & height light grade GI Pipe complete all as specified and directed by Engr-in-Charge. Make-Havells, Cat Part No :- LHFXBON1TN6F035 or equivalent to Bajaj/ Philips/ CG.

S&F in repair, Gate/Pillar/Garden light Decorative made up of high grade unbreakable polycarbonate material powder coated including one LED lamp 14W/20W B22 base and fixed with suitable dia & height light grade GI Pipe complete all as specified and directed by Engr-in-Charge. Make- Havells, Cat Part No :- LHFXBON1TN5Q020 or equivalent to Bajaj/ Philips/ CG.

S&F in repair, Garden light Decorative made up of high grade unbreakable polycarbonate material powder coated including one LED lamp 14W / 20W B22 base complete all as specified and directed by Engr-in-Charge. Make- Havells Cat pat No :-BAMBOOBLS8WLED830 PSYMTOPC or equivalent to Bajaj/ Philips/ CG.

S&F in repair, MCCB, 4 pole, 100 Amp, 415V 50Hz with thermal magnetic trip unit rating breaking capacity 25 KA,lcu=100%, confirming to IS : 13947 (Part I & II) including connection and testing complete all as specified and as directed by Engr-in-Charge. Make :- L&T Cat No.CM90642OOLO or equivalent to Havells / Schneider.

S&F in repair, MCCB, 4 pole, 160 Amp, 415V 50Hz with thermal magnetic trip unit rating breaking capacity 25 KA,lcu=100%, confirming to IS : 13947 (Part I & II) including connection and testing complete all as specified and as directed by Engr-in-Charge. Make :- L&T Cat No.CM90642OONO or equivalent to Havells / Schneider.

S&F in repair, MCCB, 4 pole, 200 Amp, 415V 50Hz with thermal magnetic trip unit rating breaking capacity 36 KA,lcu=100%, confirming to IS : 13947 (Part I & II) including connection and testing complete all as specified and as directed by Engr-in-Charge. (Make :- L&T Cat No.CM90642OONO or equivalent to Havells / Schneider.

S&F in repair, MCB 230V, single pole, 40-63 Amps, 'C' curve, 10 kA complete all as specified and as directed. Make: L&T, Cat No. BB30630C or equivalent

S&F in repair, MCB 230V, single pole, 6-32 Amps, 'C' curve, 10 kA complete all as specified and as directed. Make: L&T, Cat No. BB30320C or equivalent

S&F in repair, All-in-One Solar Street Light 15 Watt, 12.8 Volt, 18 Amp Li-FePo4 Battery with Mppt Charge Controller with 50 Watt Mono Solar Panel, including connection and testing complete all as specified and as directed by Engr-in-Charge.

S&F in repair, All-in-One Solar Street Light 20 Watt, 12.8 Volt, 24 Amps Li-FePo4 Battery with Mppt Charge Controller with 60 Watt Mono Solar Panel, including connection and testing complete all as specified and as directed by Engr-in-Charge.

S&F in repair, 2 Pole Power Contactors 22 Amps type MNX 22-2P complete all as specified and directed. Make :- L&T Cat No CS90238 or equivalent make of Havells/ shcnider.

S&F in repair, 3 Pole Power Contactors 22 Amps type MNX 22 complete all as specified and directed. Make:- L&T Cat No CS94980 or equivalent make of Havells/ shcnider.

S&F in repair, astronomical time switch complete all as specified and directed. Make: L&T Cat No AUTS02AST00 or equivalent make of Havells/ shcnider.

S&F in repair, Nature switch sensor illuminate level for switching on < 30 lux and for switching off >10 lux alongwith part night operation facility of 4-12 hours complete all as specified aqnd directed. Make : Swadeep or equivalent in CG /L&T

S&F Automatic street light switch using Nature Switch for automatic switching of street lights based on lux level of natural light. The sensor (Nature Switch) alongwith and including supply and fix of suitable power contactor of 1 Nos 40 Amps (Two pole ) two Nos MCB 63 Amps (single pole) and support terminals enclosed in pole /wall mountable enclosure of suitable size made out of rust proof electric shock proof termite proof and FR grade special moulding compound sintex make SMC junction box of suitable size confirming to IP54 circuit wiring suitable enough to take load of 8 KW single phase load, all as per Kadatiya Energy System Ltd Hydrabad Model SWADEEP 02EC-8KW1P or techno commercially equivalent models in Havells/ L & T complete all as specified and directed.

S&F Automatic street light switch using Nature Switch for automatic switching of street lights based on lux level of natural light. The sensor (Nature Switch) alongwith and including supply and fix of suitable power contactor of 1 Nos 40 Amps (four pole ) three Nos MCB 63 Amps (single pole) and support terminals enclosed in pole /wall mountable enclosure of suitable size made out of rust proof electric shock proof termite proof and FR grade special moulding compound sintex make SMC junction box of suitable size confirming to IP54 circuit wiring suitable enough to take load of 12 KW load equally distributed over three phase load, all as per Kadatiya Energy System Ltd Hydrabad Model SWADEEP 02EC-12KW3P or techno commercially equivalent models in Havells/ L & T complete all as specified and directed.

Taking LT shutdown, dismantling and removing motor of the High mast light pole from existing position, Shifting to authorized workshop for the repair work, removing the burnt winding, cleaning rotor / stator, re-winding the motor with super enameled copper wire of size equivalent to the original winding including insulated packing materials, Varnishing, Drying etc and installing back to the original position, testing and commissioning all as specified & directed.

M&L for preparation of old painted surface of steel tubular street light poles and applying two coats of aluminum paint from top to bottom including light brackets complete all as specified and as directed.

Attending of day to day street/ Security/ Gate light/Post top lantern/ High Mast light fixed up to 15 mtr height (LED, HPSV, MH, Flouescent, T-5, LED Flood light fitting etc of any make) complaints received throuh telephone or in person and reactification of defects installed on street light pole 9/11 mtr long building walls, roof by bringing down the fittings on ground or in position including replacement of LED Driver, lamp, ignitor, flexible wire, reflector etc including cleaning of glass/ acrylic cover for clear reflection of light, replacement of old unserviceaable street light fittings with new fittings etc as required to make the light fitting functional (Vehicle, ladder, tools and takes as required at site for repair/ making light functional shall be provided by the contractor at his own cost and arrangement complete all as directed by Engineer-in-Charge..

Note :- (i) Light fitting, ballast, starter,ignitor, diffuser, cable , flesible wire and LED driver, if required to replace the defective/ unserviceable parts, shall be measured and paid for separetely at S&F rates under relevant item of this BOQ as in replacement. (ii) The Contractor or his authorised rep shall collect the complaints from complaint cell at 9.00 AM or receive the complaints from AGE E/M or JE I/C on Mobile or by other digital means and report completion and handover the complaint slip duly signed by the users (iii) Old materials retrieved in replacement shall be deposited in AGE E/M yard and the contractor shall be allowed to remove the same after completion of the work and recovery of credit. (iv) Quantity of material which shall be brought by the contractor, shall be decided by the Engineer-in-Charge based on site requirement. (v) The complaints received on complaint slip or intimated Telephonically / digitally from rep of AGE E/M shall be attended & rectified within eight hours or otherwise a recovery shall be made from the contractor @ Rs 120.00 per hour for the delayed period.

M/S SS Tarders

Aawadh associates

His And Her Enterprises

M/s A.KUMAR ELECTRICALS

Ajanta Motor Store

M/S SHIVA CONSTRUCTION