Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Tender Value
₹17.2 L
EMD Value
₹34,480
Closing Date
7 Dec 2026, 6:00 pm
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Sh Dharmendra Kumar Baitha
GE(AF)Pathankot
AR and MO (MINOR CIVIL and ELECTRICAL WORKS) FOR THE FINANCIAL YEAR 2026-27 OF SRU UNIT AT DALHOUSIE
2026_MES_799044_1
GE/PAF-102/2026-27
Open Tender
Civil Works
Item Rate
180 days
GE(AF)Pathankot
As Per NIT
8 documents required · 8 mandatory
₹500
Yes
GE(AF)Pathankot
₹34,480
Yes
17 Nov 2026
17 Nov 2026
9 Dec 2026
17 Nov 2026
7 Dec 2026
1 Dec 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Dismantling Plain or corrugated steel sheeting any gauge, thickness including Nainital or similar pattern roof coverings. | 90 | Sqm | - | - |
| 2 | S&F 0.63mm thick galvanised, corrugated mild steel sheeting with two corrrugations side lap, fixed with coach screws and washers, in roofs, wall etc. with grade of zinc coating 275 complete all as specified. | 87 | Sqm | - | - |
| 3 | S&F 0.63mm thick galvanised, plain mild steel sheeting in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 complete all as specified. | 3 | Sqm | - | - |
| 4 | M & L for preparation of new steel and iron surfaces of any description over 10 Cm width or girth not otherwise described and applying two coats of synthetic enamel paint as approved by user and directed by Engineer-in-Charge over a coat of moderant solution to remove zinc coating complete all as specified and directed by Engineer-in-Charge | 102.18 | Sqm | - | - |
| 5 | Taking down chowkhat or frame with shutters (with out taking off the shutter from the frame ) exc 1.5sqm but n exc 4.0 sqm each | 11 | Each | - | - |
| 6 | Taking down chowkhat or frame with shutters (with out taking off the shutter from the frame ) n exc 1.5sqm each | 12 | Each | - | - |
| 7 | S&F pressed steel frames of size 105mmx60mm for doors OF with one or more rebates including necessary fixing lugs, hinges ,lock strike plate ,etc complete all as specified and directed by Enginner in charge | 24 | RM | - | - |
| 8 | S&F factory made steel window/ventilator 1.25mm thick box type (primer coated) ERW hollow P section of size 60×25mm including grill using 10sqmm bar double rebated both gauge and glass shutter comprised gauged glazed skelton shutter ERW sec 50×20mm and 1mm thick with two openable leaf consisting two Nos sash bar of T sec 20×3mm complete welded to frame with one vertical mullion of ERW box type T sec of size 60×25mm and 1.25mm thick including cutting holes and making good dismantled portion in PCC (1:2:4) type B-1 four Nos for Each window including following fitting welded to frame shutter :- (a) Hold fast 150mm long of 12×3mm made to shape 04 Nos per window, (b) Handle of Z sec 20×25mm, 100mm long per No leaf, (c) Stainless steel tower bolt 150mm long, 02 Nos per leaf, (d) Z sec 20×25mm, 100mm long stopper 01 Nos per leaf, (e) cleat 55mm long of hollow square 15×20×63mm welded to hinge 01 Nos per leaf,(f) MS pintal hinges of size 75×12mm, 02 Nos per leaf incl. Stainless steel wire cloth , 0.25mm to 0.36mm nominal dia of wire & average width of aperture 1.40mm to 2mm & fixed with alluminium wire staples and glass pane 3mm thick fixed with MS pin and oil putty incl. two coats of synthetic enamel paint complete incl taking down existing window/ventilator. Note:- During fixing of windows/ventilator, surfaces shall be make good in plumb with existing finishes like cement plaster, similar wall tile,floor tile etc and as per site requirement. | 9 | Sqm | - | - |
| 9 | S&F 35 mm thick plain framed panelled shutters (two planel) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of the rail and stile as per IS:1003(Part I), kiln sseasoned and chemically pressure treated. | 8 | Sqm | - | - |
| 10 | S&F 3 mm thick plainsheet glass, ordinary quality and glazing with oil putty in square n exc o.5 sqm each pane all as specified by Engr-in-charge. | 8 | Sqm | - | - |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.44 MB
Tender102.pdf
Tender Documents • 1.24 MB
BOQ_896445.xls
BOQ • 2.31 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .