Improvement to wash rooms at general machine shop spacecraft hangar and finished goods stores at PPT in Aerospace division HAL BC

Name of the Individual / Firm / Company: * Mandatory

Type of ownership

Details of Constitution or Legal Status such as certificate of incorporation, shops and establishments, Contractor registration No etc.,

Address for correspondence:

PAN No.:

Contact details

Please Enter Contact person Name

Pls Enter Mobile No

Cost of tender document (DD no, Date, amount)

Earnest Money Deposit (Number, Date, Amount)

Registered Contractor

Not Enclosed

Average annual financial turn over during the last 3 years, ending 31st March 2024 [ should be at least 30% of the approx. estimated amount put to tender]

TURN OVER IN Rs.

Enclosed

Enclosed

Enclosed

ESI & PF Nos with proof

Related Document to be Uploaded to eProcurement Portal

Bank(s) details: [Copy of the cheque leaf to be uploaded]

Related Document to be Uploaded to eProcurement Portal (Note Canceled cheque leaf to be uploaded)

Latest Bankers Solvency Certificate from Nationalized/ scheduled Bank issued NOT before 12 months from the last date of Tender submission.(solvency required will be 40% of the approx. estimated amount put to tender)

Pls Enter Details to 'Name of the Bank' , 'Date of Issue','Value in Rs

Electrical license

Experience of having successfully completed similar works during last 7 years ending on previous day of last day of submission of tender. [Latest work experience certificate may be uploaded] (i) THREE similar completed works each costing not less than the amount equal to 40% of the approx. estimated amount put to tender. (ii) TWO similar completed works each costing not less than the amount equal to 50% of the approx. estimated amount put to tender. (iii) ONE similar completed work costing not less than the amount equal to 80% of the approx. estimated amount put to tender.

Type of Work: [ Incase of private works the same shall be supported with TDS certificate]

Please enter Details for Work No 1

Type of Work: [ Incase of private works the same shall be supported with TDS certificate]

Pls Enter Details for Work No II

work done

Type of Work: [ Incase of private works the same shall be supported with TDS certificate]

Pls Enter Details for Work No III

Details of person holding the power of Attorney (If different from contact person)

Related Document to be Uploaded to eProcurement Portal

Pls Enter Details for Person holding Power of Attorney

DECLARATION I

DECLARATION II

Pls Accept the Delaration II

Improvement to wash rooms at general machine shop, spacecraft hangar & finished goods stores at PPT in Aerospace division, HAL (BC)

Specification

Earth work in excavation by mechanical means (Hydraulic excavator)/manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.etc., complete as directed by the EIC/ OIC. All kinds of soil.

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and for all lift etc complete as dir by EIC/OIC

Demolition of brick work manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 m lead as directed by EIC. In Cement Mortar

Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix)

Taking out/removing the existing roof treatment including damaged tarfelt, loose plaster, etc., from roof surface of any description at any height with required scaffolding and preparing the surface by cleaning with brushes and solvent, taking out all dirt, dust, fungus, organic matter etc., all complete including disposal as directed by EIC.

Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.

Taking down carefully existing sanitary fittings fitted in a toilet block such as Urinals. Wash basin, IWC, EWC flush tank, marble screen wall, plumbing & sanitary lines etc., and handing over the serviceable materials to Stores/ Maintenace Department incl. removal of debris etc., complete as directed by EIC/ OIC. (However, disposal of debris outside at authorised landfill will be paid separately).

Dismantling doors, windows and clerestory windows ventilators (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead :Of area 3 sq. metres and below

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead For thickness of tiles 10 mm to 25 mm

FORM WORK:Centering and shuttering including strutting, propping etc and removal of form for

Foundations, footings, bases of columns, etc. for mass concrete

Columns,Pillars,Piers, Abutments,Posts & Struts

Lintels,beams,plinth beams, girders, bressumers & cantilevers

Supplying & Mixing Integrated Water Proofing Compound shall confirm to the requirements of IS 2645:2003 IN Cement Concrete/ Cement works in proportion as specified by the manufacturers specification etc., complete as directed by the EIC/OIC.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : For 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources)

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:1½:3 (1 Cement: 1½ coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)

Steel reinforcement for R.C.C. work including straightening, cutting, bending placing in position and binding all complete upto & above plinth level. Mild steel and Medium Tensile steel bars

Supplying,fabricating and fixing steelwork in builtup tubular (round square or rectangular hollow tubes) such as ISSHS/ ISRHS/ISMB/ ISA/ ISMC/NB/ MS Plates/ MS Flats/ trusses etc including cutting, hoisting & fixing in position and applying a coat of approved steel primer at any height including required scaffolding for base plates, stiffners, bolts,cutting, welding, bolted with special washers etc., complete. Hot finished seamless type tubes

Brick work with Table Moulded Bricks built in cement mortar (1:6) at all levels for 230 mm thick walls for superstructure including raking out joints 10mm deep scaffolding, curing etc., all complete as directed by the EIC. (Brick conforming to IS 1077: Sub Class 'A' having compressive strength not less than 35 Kgs/Sq.cms) as directed by EIC.

Providing and laying Autoclaved Aerated concrete (AAC) blocks masonry with 150mm/ 230mm/300 mm thick with Grade-I AAC blocks of density 551 to 650 kg/ cum conforming to IS: 2185 (Part 3) in super structure above plinth level up to floor V level with RCC band at sill level and lintel level with approved block laying polymer modified adhesive mortar all complete as per direction of EIC. (The payment of RCC band and reinforcement shall be made for seperately).

Plastering the internal surface of walls and Ceiling with 12 & 10 mm cement plaster finished with a floating coat of neat cement of mix:1:3 (1 cement: 3 fine sand) etc., complete as directed by the EIC/ OIC.

Plastering the external surface of walls with 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix :1:3 (1 cement: 3 fine sand)etc., complete as directed by the EIC/ OIC.

Supplying and Fixing louvered/Fixed type polyester powder coated aluminium ventilator/ with 4.5mm thick plain glass without sash bar with necessary anodized aluminium snap beadings, joining cleats,screws selflocking glazing clips, neoprene rubber gasket.etc all complete as directed by EIC/OIC.

Supplying & Fixing Exhaust Fan 300 mm Dia over Toilet areas

Providing and fixing Chlorinated Poly vinyl Chloride (CPVC) pipes,having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.Internal work - Exposed on wall

a) 20 mm dia,

b) 25 mm dia,

Providing and fixing rectangular high density polyethylene water storage loft tank with cover, conforming to ISI:12701, colour of opaque white or as approved by Engineer-in-charge. The rate includes making necessary holes for inlet, outlet & over flow pipes. The base support i/c fittings & fixtures for tank shall be paid separately.

(500 Ltr Tank) 4 Nos

Providing and laying Vitrified tiles in Floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @ 3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only. Laying of tiles will be done with the notch trowel, plier, wedge,clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily.etc complete as dir by EIC/OIC.

Glazed Vitrified tiles Matt/Antiskid finish. Size of Tile 600 x 600 mm

Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in colours White,Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement: 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching B27 pigments etc., complete. as dir by EIC/OIC

Providing and fixing Ist quality ceramic glazed Wall Tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade etc complete as dir by EIC/OIC.

Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement,mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing of edges to give high gloss finish etc. complete at all levels.

Granite stone slab of colour black, Cherry/Ruby red for Area of slab over 0.50 sqm

Providing and fixing in position of vitreous Urinals of Parryware/ Hindware Italian collection of approved model incl. all required fittings such as CP spreaders, CP flange, CP brass screws, washers, etc., incl. cutting & making good the walls and floors wherever required including removing existing CC bedding etc., complete all as per the specification & direction of EIC/ OIC.

Supplying and fixing in position of approx size 7500mm x 1500mmx 20mm thick Jet black granite screen wall for urinals including necessary polishing (both sides), rounding of edges, framing etc., complete all as directed by EIC/ OIC.

Supplying and fixing premium make vitreous Circular Wash Basin (granite top) of size (21" x 18") of approved colour including 15mm dia premium Pillar cock, CP brass stop cock 15mm dia,, inlet pipe with checknuts, CP coupling & waste connection, etc., complete. with required anchor nut and bolts all as directed by EIC/ OIC.

Supplying & Fixing IWC of approx size 550mm x 425mm size coloured glazed of approved make with integrated foot rest, 10 Ltrs capacity syphonic action PVC low level flushing tank, premium quality stop cock, PVC flush pipe with bend 1 No & 15 mm dia PVC high pressure inlet pipe with check nuts including removing existing cc beddingetc., complete as directed by EIC/OIC.

Supplying and fixing light coloured glazed wall -Hung EWC of premium make with concealed flush tank, angle cock, pillar cock, paper holder, health faucet & all necessary fixture/ fittings water & sanitary connections including removing existing CC bedding etc., complete as directed by EIC/ OIC.

Supplying, fixing 15mm dia nominal bore powder coated brass heavy duty long body Bibcock of Jaguar's or equivalent make and fitted to the water pipe line by jointing with the necessary fitting etc., all complete as per specification and direction of EIC/ OIC

Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors : for Hubless centrifugally cast (spun) iron epoxy coated inside & outside as per IS:15905

Providing and fixing PTMT grating of approved quality and colour. circular type 100 mm nominal dia

Supplying and fixing Premium Quality Long Brass CP towel rail of 600 mm with brackets etc., complete as directed by EIC/OIC.

Supplying and fixing Premium Quality etched design mirror of sizes detailed below of approved shape & quality glass etc., complete as directed by EIC/OIC.

750mm x 450mm

900mm x 450mm

Supplying and fixing 28-30mm thk. factory made WPC (Wood Polymer Composite) solid moulded door incl. WPC frame of approx. size 120mm x 60mm of approved make & design incl. 4 nos. 5" SS Hinges, Handle Mortice Lock, Door stopper etc., complete as directed by EIC/OIC

Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc complete.

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes

75 mm dia,

110 mm dia,

Providing and fixing in position pre-cast R.C.C. manhole cover and frame of required shape and approved quality Rectangular shape 600x450 mm internal dimensions

Disposal of moorum/building rubbish /malba/ similar unserviceable dismantled or waste material by mechanical transport including loading, transporting, unloading to approved municipal dumping ground for lead upto 10 km for all lifts, complete as per directions of Engineer-in-charge. Note - item to be applicable in urban areas having directions for restricted hours for movement/ plying of load carrying motor vehicle of 3.5 cum or more

Wall painting with premium acrylic emulsion paint of Interior grade having VOC (Volatile Organic Compound ) content less than 50 grams /litre of approved brand and manufacture including applying additional coats wherever required to achieve even shade and colour. Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.

Painting by applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre Finishing walls with Acrylic Smooth Exterior paint of required shade : Old work (Two or more coat applied @ 1.67 ltr/ 10 sqm) on existing cement paint surface.

The tenderer shall quote the rates inclusive of GST and all other taxes, duties, levies, fees and charges or any other imposition by the Central / State Government or any statutory authorities of whatever nature. All other costs including loading, un-loading, Insurance, transportation, testing, Certification expenses. L1 (lowest quote) will be determined based on the total quoted amount inclusive of all taxes and other charges as mentioned above.

Payment will be subject to terms and conditions in the tender document