Loading
Loading…
Loading…
Tender Value
₹6.2 L
EMD Value
₹7,800
Closing Date
5 Oct 2026, 6:00 pm
Area Engineer(E and M)
Office of the General Manager Pandaveswar Area , P.O. Pandaveswar, Dist.-Paschim Bardhaman, West Bengal-713346
Fabrication and erection of new tippler with chute and accessories at no. 2 pit of Khottadih Colliery
2026_ECL_366109_1
GM-PND/EandM/26-27/100/2623 dated 23/09/2026
Open Tender
Electrical and Maintenance Works
Item Rate
30 days
Khottadih Colliery
Please refer Tender documents.
4 documents required · 4 mandatory
₹7,800
24 Sept 2026
24 Sept 2026
6 Oct 2026
24 Sept 2026
5 Oct 2026
24 Sept 2026
24 Sept 2026 - 28 Sept 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1Fabrication and erection of new tippler with chute and accessories at no. 2 pit of Khottadih Colliery. (Inclusive of EPF/CMPF) | |||||
| 1.01 | Bottom Support girder is to be removed by gas cutting of Bolts & Nuts and breaking of PCC concrete. (Material Cost: Oxygen) | 2 | Nos | - | - |
| 1.02 | Bottom Support girder is to be removed by gas cutting of Bolts & Nuts and breaking of PCC concrete. (Material Cost: DA) | 1 | Nos | - | - |
| 1.03 | Bottom Support girder is to be removed by gas cutting of Bolts & Nuts and breaking of PCC concrete. (Labour Cost) | 8 | Skilled Manshift | - | - |
| 1.04 | Bottom Support girder is to be removed by gas cutting of Bolts & Nuts and breaking of PCC concrete.(Labour Cost) | 32 | Unskilled Manshift | - | - |
| 1.05 | Fixing of Girder by PCC concrete (Material Cost) | 1 | Nos | - | - |
| 1.06 | Fixing of Girder by PCC concrete (Labour Cost) | 32 | Unskilled Manshift | - | - |
| 1.07 | Bottom support of tippler stand is to be removed by gas cutting of bolts & nuts & fresh support 02 nos. to be fabricated from 65mm x 365mm x 6mm MS Angle with necessary gas holes & fixing the same with base frame by nuts & bolts. (Material Cost: Oxygen) | 4 | Nos | - | - |
| 1.08 | Bottom support of tippler stand is to be removed by gas cutting of bolts & nuts & fresh support 02 nos. to be fabricated from 65mm x 365mm x 6mm MS Angle with necessary gas holes & fixing the same with base frame by nuts & bolts. (Material Cost: DA) | 2 | Nos | - | - |
| 1.09 | Bottom support of tippler stand is to be removed by gas cutting of bolts & nuts & fresh support 02 nos. to be fabricated from 65mm x 365mm x 6mm MS Angle with necessary gas holes & fixing the same with base frame by nuts & bolts. (Material Cost: MS Nut & Bolts) | 1 | LS | - | - |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.05 MB
Tendernotice_1.pdf
PDF • 2.33 MB
BOQ_379042.xls
BOQ • 0.31 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .