SPECIAL REPAIRS TO BLDG NOS P-81, P-82 AND P-83 AT KADAMBA VANAM AT NAVAL BASE KARWAR

Amount

Dismantling single layer Mangalore pattern or similar tiles in roofing all as specified and directed.

M & L for roof tiles, Mangalore pattern class 'AA', interlocking at side joints, laid dry complete all as specified and directed.

M & L for ridge or hip tiles to suit mangalore pattern of roofings tiles, bedded and jointed in cement mortar 1:3 in small patches including dismantling existing ridge tiles complete all as specified and directed.

Demolition of cement concrete of any description and in any position all as specified and directed.

M & L for Plain cement conrete (1:2:4 ) type B-0 using 12.5 mm graded aggregate as in coping, hold fast, cills, steps, water troughs and the like including weathering, slightly rounded or chamfered angles and throating etc. complete all as specified and directed.

M & L for Plain cement conrete (1:3:6 ) type C-0 using 12.5 mm graded aggregate as in roof kerbs or mud stops rounded or chamfered edges complete all as specified and directed.

M & L for applying two coats of water proofing coating system by applying shalicryl-215 of STP Ltd/Rain coat 601 of DR fixit /Barrier coat of Araldite over a coat of respective primer including preparation of plaster surface by complete removal of existing treatment including filling of crack with respective crack filler all as per manufacturer's instructions complete all as specified and directed.

Demolition of stone slabs and tiles of any description and thickness in floors, aprons etc laid bedded and pointed in any mortar complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and removing all the rubbish as directed by Engineer-in-charge complete all as specified and directed.

M & L for screed bed or bedding layer 15 mm thick in cement mortar 1:6 to receive topping layer such as tiling etc complete all as specified and directed.

M & L for rendering 10 mm thick in cement mortar 1:4 on fair faces of concrete/ brick work surfaces finished fair and even without using extra cement to receive tiles complete all as specified and directed.

M & L for screed bed or bedding layer 20 mm thick in cement mortar 1:6 to receive topping layer such as tiling etc complete all as specified and directed.

M & L for non skid ceramic coloured tiles (1st quality) 7 to 8 mm thick (Square/ rectangular), area of each tile exc 0.06 Sqm but not exc 0.11 Sqm as in floors etc set and jointed in neat grey cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M & L for coloured glazed ceramic tiles (1st quality) of size 300 x 200 x 6 to 7 mm thick on vertical surfaces such as skirting, dado and rises to steps etc., set and jointed in neat cement slurry and pointed in white or colour cement to match the colour of tiles complete all as specified and directed.

M & L for machine cut kota stone slab flooring 20-25 mm thick, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing complete all as specified and directed. NOTE: Size of kota stone shall not be less than 60 x 60 cm.

M & L for non skid ceramic coloured tiles (1st quality) 7 to 8 mm thick (Square/rectangular), area of each tile exc 0.18 Sqm but not exc 0.38 Sqm as in floors etc set and jointed in neat grey cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

Description all as per item No 16.00 above but as in skirting/ dado etc.

M & L for cutting channels, grooves or rebates not exc 15 cm girth, and trimming surface of with or without reinforcement all as specified and directed.

Taking up or down 15 mm bore pipes steel tubing or any pipe and connections, all as specified and directed.

Taking up or down 20 mm bore pipes steel tubing or any pipe and connections, all as specified and directed.

Taking up or down 25 mm bore pipes steel tubing and connections, all as specified and directed.

Supply and fixing 15 mm dia UPVC pipes of pressure rating 10 Kgf/cm2 fixed complete to walls, ceiling or in floors etc all as specified and directed.

Supply and fixing 20 mm dia UPVC pipes of pressure rating 10 Kgf/cm2 fixed complete to walls, ceiling or in floors etc all as specified and directed.

Supply and fixing 25 mm dia UPVC pipes of pressure rating 10 Kgf/cm2 fixed complete to walls, ceiling or in floors etc all as specified and directed.

Supply and fix in repairs ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe of 20 mm bore (Minimum weight-210gms) complete all as specified and directed.

Supply and fix in repairs 25 mm bore gun metal/ bronze gate valve ISI marked with iron wheel head screwed both ends for iron pipe complete all as specified and directed.

Demolition of unreinforced cement concrete in ground floor and pavings not exc 15 cm thick (below or above ground level) and removing all the rubbish as directed by Engineer-in-charge complete all as specified and directed.

M & L for 75 mm thick PCC (1:3:6) type-C2 using 40 mm graded stone aggregate as in plinth protection and finishing the concrete surface even and smooth without using extra cement complete all as specified and directed.

M & L for second class hard wood Sal plain solid, straight chowkats and frames wrought framed rebated on the solid, rounded or chamfered put together with glue, pinned at joints all as specified and directed.

Taking down wooden door/ window/ CB shutters of any description, area exc 1 Sqm but not exc 2 Sqm each and offering credit as per schedule of credit all as specified and directed.

Description all as per item No 30.00 above but not exc 1 Sqm each.

S & F factory made PVC door frames of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube suitable for opening as per site condition complete all as specified and directed and shown on page No. 160 of SSR part-II.

S & F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tube for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/ sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement complete all as specified in drawing on sl page No 156 of SSR 2010 part –II and directed by Engr-in-Charge.

S & F aluminium powder coated (minimum thickness of powder coated 50 micron) frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc including taking down old frames complete all as specified and directed.

S & F aluminium powder coated (minimum thickness of powder coated 50 micron) window/ventilator shutters, sliding type without sash bars, aluminium sections weighing not less than 0.55kg/m including necessary jointing cleats, glazing clips, rubber neoprene packing, aluminium snap beading, screws etc complete all as specified and directed.

Taking down wooden/PVC/FRP chowkats or frames with shutters (without taking off shutter from the frame ), area exc 1.5 sqm but not exc 4 sqm each including making good disturbed portion to match with adjoining surfaces and offering credit as per schedule of credit all as specified and directed.

S & F 35 mm thick plain framed second class hard wood panelled factory made shutters (two panels) with lock rail and panel of 9 mm thick BWP commercial ply with size of rail and stiles as per IS 1003 (Part-1), kin seasoned and chemically treated all as specified and all as specified and directed.

S & F 35 mm thick plain factory made second class hard wood skeleton shutters, open rebated and prepared to receive glass, guage etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred bead for securing glass etc with size of member of shutters as specified in clause 8.24(a) of SSR Part-l, kin seasoned and chemically pressure treated all as specified and directed.

M & L in repairs for prelaminated particle board 18/19 mm thick exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination as in kitchen cabinets/shutters fixed with screws as in repairs all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for all as specified and directed.

M & L for MS framed work such as grills and similar works conforming to Fe 290.E-165 all as specified and directed.

S & F aluminium alloy wire cloth, 0.45 mm nominal dia of wire & average width of aperture 1.40 mm and fixed with aluminium wire staples all as specified and directed.

S & F in repairs aluminium alloy wire cloth, 0.45 mm nominal dia of wire & average width of aperture 1.40 mm and fixed with aluminium wire staples all as specified and directed.

S & F butt hinges 100 mm extruded aluminium alloy with galvanised mild steel hinge pin anodised type and fixed type B-21 all as specified and directed.

S & F aluminium alloy anodised sliding door bolt 250 mm with hasp staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast alluminium alloy and fixed all as specified and directed.

S & F aluminium handles 100 mm cast type anodised all as specified and directed.

S & F aluminium anodised barrel tower bolt 150 mm of extruded section and fixed all as specified and directed.

Taking down cement plaster on brick or stone walls etc, including raking out joints, hacking for key, scrubbing down with water etc all as specified and directed.

M & L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 finished fair and even complete all as specified and as directed.

M & L for rendering 20 mm thick (externally) in CM 1:4 in two layers each of 12+8 mm thick on brick or concrete surfaces including finished surfaces even and fair, using 3% WPC by weight of cement complete all as specified and directed.

M & L for preparation of old decorated surfaces of walls and applying one coat of acrylic washable distemper complete all as specified and directed.

M & L for preparation of old decorated ceiling surfaces and applying one coat of acrylic washable distemper complete all as specified and directed.

M & L for preparation of old painted plastered surfaces of walls of any description including cornices and applying one coat of weather proof exterior emulsion paint of approved shade complete all as specified and directed.

M & L for preparation of old painted wooden surfaces of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint all as specified and directed.

Description all as per item No 54.00 above but on steel surfaces.

M & L for preparation of new or previously untreated wooden surfaces exc. 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

Description all as per item No 56.00 above but on steel surfaces.

Supply only integral water proofing compound all as specified and directed.

Demolition of reinforced cement concrete in roof, floors, beams, landing chajjas and similar suspended work all as specified and directed.

M & L for reinforcement cement concrete type A0, 1:1.5:3 (12.5 mm graded aggregate) nominal mix in ceiling, chajjas, shelves and similar work complete with necessary form work all as specified and directed.

M & L for mild steel bars 6 to 8 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

Dismantling any size of cast iron or reinforced concrete drain pipes, jointed in cement mortar and taking out of trenches, if required, all as specified and directed.

S & F cast iron soil, waste and vent pipe 100 mm dia sand cast pipes, in any length with without ears, with cement joints, but fixed to walls complete all as specified and directed.

S & F branch piece single 100 mm dia (equal or unequal) ordinary or inverted (spigot or socket type) or with parallel branches all as specified and directed.

S & F branch piece double 75 mm dia (equal or unequal) ordinary or inverted (spigot or socket type) or with parallel branches all as specified and directed.

S & F in repair cast iron floor trap 100 mm dia with grating including jointing waste pipe fixed in cement concrete type B1 (1:2:4) complete all as specified and directed.

S & F in repair cast iron floor trap 75 mm dia with grating including jointing waste pipe fixed in cement concrete type B1 (1:2:4) complete all as specified and directed.

S & F in repair cast iron Nahani trap 100 mm dia with grating including jointing waste pipe fixed in cement concrete type B1 (1:2:4) complete all as specified and directed.

S & F in repair cast iron Nahani trap 75 mm dia with grating including jointing waste pipe fixed in cement concrete type B1 (1:2:4) complete all as specified and directed.

S & F 100 mm cast iron sanitary connection socket to fit WC outlet complete all as specified and directed.

S & F in repair vitreous china semi pedastal pattern (Anglo Indian type) water closet including pipe complete all as specified and directed.

S & F in repair plastic water closet seat, white/ black, closed pattern with flat bottom , and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed.

S & F in repairs sinks with drainage board made of stainless steel 1 mm thick with plugs, washers and wastes, including bedding in cement mortar on to dwarf walls or including cantilever brackets and connecting union to pipe overall size 915 mm x 460 mm bowl size 410 mm x 330 mm x 160 mm complete all as specified and directed.

S & F in repairs 32 mm size waste fitting (coupling) brass, chromium plated for glazed ware sinks, basins etc. with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed all as specified and directed.

Description all as per item No 74.00 above but 40 mm.

S & F in repairs 32 mm bore PVC waste pipe with fittings of approved make suitable for WHB, Urinals etc all as directed.

Description all as per item No 76.00 above but 40 mm.

S & F in repairs brass chromium plated mixer for mixing hot & cold water screwed down for 15 mm dia iron pipe complete all as specified and directed. MAKE: Jaquar Cat No CON-273KNUPR or equivalent in Marc/ Kohler/ Plumber

S & F in repairs Pillar taps cast copper alloy fancy type chromium plated with capstan heads screwed down high pressure with long screwed shanks and fly nuts, screwed for iron pipe of 15 mm bore all as specified and directed.

S & F in repairs 450 mm long PVC connection with two nos. PTMT nuts internally threaded and PVC washer suitable for 15 mm bore pipe line complete all as specified and directed.

S & F in repairs stop valves, cast copper alloy fancy type chromium plated with long shank and cup (concealed type) for iron pipe of 15 mm bore all as specified and directed.

S & F in repair chromium plated shower rose with 300 mm long arm rectangular shape 125 mm square all as specified and directed.

S & F in repairs mirror mounted PVC cabinet of size 422 x 622 mm all as specified and directed. MAKE: Prayag Cat No 555 or equivalent in makes as specified herein after.

S & F in repairs PVC low level flushing cistern white 10 litrs capacity and connections to pipes complete all as specified and directed.

S & F in repair wash basin vitreous china, flat back size 550 x 400 mm white excluding taps, waste chain and plug and porcelain stopper but including brackets all as specified directed.

S & F in repairs chromium plated health faucet with spring pipe all as speified and directed. MAKE: Jaquar Cat No ALD-CHR-585 or equivalent in Marc/ Kohler/ Plumber

S & F in repairs bib taps, cast copper alloy fancy type, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe 15 mm bore all as specified and directed.

S & F in repairs aluminium alloy powder coated curtain rod/ hanger rod 19 mm dia all as directed.

S & F in repairs aluminium alloy powder coated bracket with new screws for curtain rod all as directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden/ steel frames or stone concrete or brick surrounds, glazed with putty or fixed with beads complete complete all as specified and directed.

S & F 3 mm thick plain sheet glass, ordinary quality and glazing with oil putty or fixed with beads in square not exc. 0.5 Sqm in each pane complete all as specified and directed.

S & F 3 mm thick frosted sheet glass, ordinary quality and glazing with oil putty or fixed with beads in square not exc. 0.5 Sqm in each pane complete all as specified and directed.

S & F 125 mm long butt hinges extruded aluminium alloy with galvanaised mild steel hinge pin, anodised and fixed type B-1 medium weight cold rolled complete all as specified and directed.

S & F 125 mm long aluminium handles, cast type andoised complete all as specified and directed.

S & F 300 mm long (length of bolt) aluminium alloy, anodised, sliding door bolts with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruted sections or cast-aluminium alloy and fixed complete complete all as specified and directed.

S & F floor door stopper length of 140 mm of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floors complete complete all as specified and directed.

S & F tubular towel rail brass chromium plated, 20 mm dia, D-type, 60 cm long between flanges complete all as specified and directed.

M & L for providing and injecting emulsion for post construction anti-termite treatment at points of contacts of wood with masonry/ concrete surfaces using chemical emulsion mixed with oil or kerosine at the rate of 0.5 litres per hole including drilling 6 mm dia holes at a downward angle of 45 degree at 150 mm centre to centre and plugging the holes with cement mortar (1:2) etc to match with existing surface complete all as specified and directed by Engr-in-Charge.

Taking down copper/ aluminium point wiring (light, fan, socket or power) complete including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc. complete all as specified and as directed.

Taking down unserviceable DB TPN/ SPN any type any capacity complete and making good disturbed surfaces as specified and directed.

M & L for surface point wiring 1100 Volts grade 1.5 Sqmm PVC (FRLS) insulated unsheathed cable with multistranded copper conductor FR grade conforming to IS-694-1990 with ISI marking drawn through existing concealed conduit with all accessories in wall/ ceiling/ floor/ roof etc, including suitable size sunk pressed steel or cast iron terminal box with 3 mm thick plastic laminated sheet top cover including providing 1.5 Sqmm PVC insulated FRLS unsheathed 1100 Volts multistranded copper conductor cable as continuous earth wire connected to common earth dolly complete all as specified and directed for:

(a) One light/ fan point controlled by one switch.

(b) One light point controlled by two way switches.

(c) One 3 pin socket outlet 5 Amp on independent board.

(d) One 3 pin socket outlet 5 Amp on the same board.

(e) One bell/ buzzer point controlled by one push button independent.

M & L for point wiring complete for one socket outlet 15 Amps on an independent board with 2.5 Sqmm single core PVC (FRLS) insulated unsheathed 1100 V grade cable with multistranded copper conductor FR grade conforming to IS-694-1990 including PVC casing caping pressed steel terminal box not less than 2 mm thick of required size including painting terminal boxes inside and outside with two coats of synthetic enamel paint over a coat of red oxide primer and with top cover 3 mm thick of plastic laminated sheets of required colour, complete with all accessories and all specified including FRLS PVC insulated unsheathed 2.5 Sqmm multistranded solid copper conductor single core cable of green colour as earth wire to common earth and connected to earth dolly drawn in same concealed conduit complete and controlled by one 15 Amps switch complete all as specified and directed.

S & F in repairs ceiling fan regulator electronic step type 230 Volts single phase all specified and directed.

S & F in repairs switch piano flush button ISI marked, 5 Amps, 240 volts, single pole one way complete all as specified and directed by Engr-in-Charge.

S & F in repairs switch piano flush button ISI marked, 5 Amps, 240 volts, single pole two way complete all as specified and directed by Engr-in-Charge.

S & F in repairs socket 5 Amps, ISI marked all as specified and directed.

S & F in repairs switch socket combination outlet 3 pin 5/16 Amps, flush type multipurpose with fuse and neon indicator ISI marked all as specified and directed.

S & F in repairs switch socket combination outlet 3 pin 5/16 Amps, flush type multipurpose ISI marked all as specified and directed.

S & F in repair LED tubelight alongwith fixture, 24 Watt, decorative ultra slim aluminium square profile LED lighting fixture with high lumen output, environmental friendly, energy efficient ready to use pack compete all as specified and directed. MAKE: Havells Cat No. LHEXACP7IN1S024 or equivalent in Bajaj/Philips/CG

S & F in repairs LED 10 Watt bulkhead luminaire compete all as specified and directed. MAKE: Havells Cat No. RUGBYNEONFT10WLED860SSYMTOPC or equivalent in Bajaj/Philips/CG

S & F in repairs batten holder PVC/ Polycarbonate type with cord grip cap suitable for pendent fittings, ISI marked, all as specified and directed.

M & L for rewinding ceiling fan 1200/1400 mm sweep with super enamelled copper wire of existing gauge including insulation material varnishing and drying all as specified and directed.

Description all as per item No. 112.00 above but for exhaust fan of 300 mm sweep, 3 phase 415 Volts.

S & F in repairs MCB DB SPN 8 ways double door, IP-42 protection with 200 Amp rated bus bar, 240 Volts complete all as specified and directed. MAKE: HAVELLS/INDOASIAN/L&T/LEGRAND

S & F in repairs MCB TPN, 63 Amps, 230 Volts, Single phase, 10 KA Capacity all as specified and directed.

S & F in repairs MCB SPN, 40 Amps, 230 Volts, Single phase, 10 KA Capacity all as specified and directed.

S & F in repairs MCB SP, 6 to 30 Amps, 230 Volts, Single phase, 10 KA Capacity all as specified and directed.

S & F in repairs bell, AC, 230 Volts, Single phase all as specified and directed.

M & L for earthing complete with galvanized steel earth plate 600 x 600 x 6 mm thick, buried directly in ground (earth pit not less than 2.25 m deep below ground level) with top edge of the plate not less than 1.5 m below normal ground level, connected to galvanized iron wire 4 mm as earthing lead by means of bolts, nuts, check-nuts, and washers of galvanized iron or steel besides welding at all joints as shown in drawings and including excavation and earth work, GI pipe light grade 15 mm bore for protection of GI wire from earth electrode to and including the earth test point of galvanized Iron/steel of size 75 x 75 x 25 mm, supplying and laying charcoal dust, common salt, PCC 1:2:4 type B-1 chamber and MS angle iron frame 40 x 40 x 3 mm and RCC cover 40 mm thick (1:2:4) type B-1 using 20 mm graded stone aggregate reinforced with 6 mm dia round bars @ 75 mm C/C both ways with MS handle 12 mm dia, GI funnel and wire mesh, 20 mm dia GI pipe light grade for watering all as shown in Plate No. 3 of SSR Part I of 2009 and connected to earth test point including testing complete all as specified & directed.

S & F in repairs bell push, flush type, 5 Amp all as specified and directed.

M/S G.N.POWAR

ABDUL RAHIM

K.G.SHANKER

Ms V. S. NAYAK

Bidder Name

M/S G.N.POWAR

ABDUL RAHIM

K.G.SHANKER

Ms V. S. NAYAK

SIRI SALES AND SERVICES