REPAIR/REPLACEMENT TO FENCING, COMPOUND WALL, DRAINAGE SYSTEM, PAVING AND CERTAIN MISC WORKS UNDER GE GUWAHATI

Amount

Demolition of cement concrete (un reinforced) of any description and in any position complete all as directed.

Demolition of cement concrete (reinforced) of any description and in any positiuon not otherwise specifically provided for complete all as directed.

Domolition of brick work built in cement mortar including all quoins, arches, pillers, etc or precast concrete articles complete all as directed.

Taking down cement plaster of any description from brick work or stone walls etc including racking out joints hacking for key, scrubbing down with water complete all as specified and directed.

Demolition of stone slabs and tiles of any description or thickness in floors, approns etc laid, bedded and pointed in any morter complete all as directed

Dismantling and taking out fencing post of any description and in any position including taking out embeded portion from natural ground and making good disturbed surface, segregate serviceable post for re-use at site complete all as directed.

Dismantling and taking out fencing post of any description and in any position including taking out embeded portion from concrete or massonry work and making good disturbed surface complete all as directed.

Dismantling wrought iron or mild steel work of any description and any position complete all as directed.

Dismantling fencing wire mesh of any type and size complete all as directed.

Excavation in post holes (or similar holes) each nexc 0.50 cum, getting out in soft/loose soil including returning filling in and ramming earth or broken rubble mixed with earth around in layers n.exc 25cm, watering and removing surplus soil to a distance n.exc 50m and making good the surface complete all as specified and directed.

Excavating in trenches n.exc. 1.5 metre wide and n. exc. 1.5 metre in depth for foundation, trenches for laying of under ground cable, pipe line etc and getting out in soft/loose soil complete all as specified and directed.

Excavation over area nexc 1.5 m deep and getting out in soft/loose soil complete all as directed.

Returning filling in soft/loose soil, including, spreading leveling watering and well ramming in layers not exc. 25 Cm complete all as specified and directed.

Removing excavated soils to a distance not exceeding 50 mtrs and depositing where directed at a level n. exc. 1.5 mtrs above the starting point complete all as specified and directed.

Materials and Labour for plain cement concrete (1:4:8) Type D-2 (using 40 mm graded stone aggregate) as in foundations, filling and mass concrete complete all as specified and directed.

Materials and Labour for PCC (1:3:6) type C-2 (using 40 mm graded agreegate) as in foudation, filling and mass concrete for embeding fencing post and in similar work etc complete all as specified and as directed.

Materials and Labour for plain cement concrete (1:3:6) type C2 using 40 mm graded stone aggregate as in surface channels and drains complete all as specified and directed.

Materials and Labour for Extra for forming fair finishing to surfaces drain/channel 30 cm inner girth in cement concrete ,using extra cement incl forms, moulds etc complete all as specified and directed.

Add or deduct for each 25 mm girth or part thereof over or under 30cm inner girth in cement concrete ,using extra cement incl forms, moulds etc complete all as specified and directed.

Materials and Labour for plain cement concrete (1:2:4) type B2 using 40 mm graded stone aggregate as in walls or retaining walls, any thickness, size or shape including pilasters, buttresses columns, pillars, boundary pillars and posts complete all as specified and directed.

Materials and Labour for reinforced cement concrete (1:2:4) type B1(nominal mix) using 20 mm graded stone aggt as in foundations, footings,foundation beam, plinth beam, bases for column etc. and mass concrete complete all as specified and directed.

Materials and Labour for reinforced cement concrete (1:2:4) type B1 (nominal mix) using 20 mm graded stone aggt as in Columns, pillars, piers, posts and struts complete all as specified and directed.

Materials and Labour for reinforced cement concrete (1:2:4) type B1 (nominal mix) using 20 mm graded stone aggt as in beams, cantilevers, bressummers and lintels over 1.5m span complete all as specified and directed.

Materials and Labour for providing precast reinforced cement concrete (1:2:4) type B1 (nominal mix) using 20 mm graded stone aggt as in precast fencing post, boundary pillar, man hole cover etc incl necessary form work complete and set in CM (1:4) all as directed..

Fixing only old serviceable post obtaine from dismantling complete all as directed.

Materials and labour for brick work with sub class' B' bricks straight or curved on plan exc 6m mean radius built in CM(1:6) complete all as specified and directed.

Materials and labour for brick work with sub class' B' bricks straight or curved on plan to any radius in half brick thick wall built in CM(1:4) in super structure complete all as specified.

Materials and labour for form work to sides of concrete foundations, footings, foundation beams, plinth beams, bases for columns etc and similar work on flat surfaces to receive fair finished surfaces of concrete complete all as specified and directed.

Materials and labour for form work to faces of walls,retaining walls, abutments,parapets and rcase railings and similar work including attached pillasters, buttresses, etc. to received fair finished surface of concrete complete all as specified and directed.

Materials and labour for form work to sides of pillars, post, struts, and column etc to received fair finished surface of concrete complete all as specified and directed.

Materials and labour for form work to sides and soffits of floor or roof beams,girders,bressummers, lintels, cantilevers, shelves including supports,overhangs,etc to received fair finished surface of concrete complete all as specified and directed.

Supply and fixing mild steel TMT bar 10 mm dia and over ,cut to lenth, bent to shape as required including cranking,bending and binding with mild steel wire(annealed) not less than 0.9 mm dia as in main reinforcement bar complete all as specified and direted.

Supply and fixing mild steel TMT bar 8 mm dia, cut to lenth, bent to shape as required including cranking,bending and binding with mild steel wire(annealed) not less than 0.9 mm dia as in stirrupps, spacers and binders etc complete all as specified and direted.

Supply only chain link fencing made of 4.00mm dia galvanized steel wire of mesh size 100 mmx100 mm including binding wire complete all as specified and directed.

Fixing only chain link fencing of any size and any mesh including line wires, to any type of standards rails, straining bolts etc complete all as specified and directed.

Supply and fixing galvanized two strand, steel barbed wire 2.24mm dia barbed with 2mm dia bars at 75mm spacing and straining and fixing to any type of post, standard rails, straining bolts etc.securing or tying at crossing with galvanised mild steel wire staples or pins (each line of wire to be measured) complete all as specified and directed.

Supply and fix mild steel screw bolts (machine made) with hexagonal heads at one end and screwed the other, each screwed ends to be fitted with washers and one hexagonal nut, exc. 10 cm and n.exc. 15cm long and dia of shank 11 to 15 mm complete all as specified and as directed.

Supply and fix mild steel flat iron of required size,cutting, drilling holes, notching for wire etc and fixing as in fillet for securing chain link wire mesh fenching and similar works conforming to Grade E165 (Fe-290) complete all as specified and directed.

Materials and Labour for mild steel framed work such as grills,gratings, etc with ends of bars shouldered,framed guard bars,ladders,railings framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified and directed .

Materials and Labour for rendering 15mm thick on other than fair faces of brick work or concrete surfaces in cement mortar (1:6) finished even and smooth without using extra cement complete as specified and directed.

Materials and Labour for applying two coats of weather coat exterior acrylic emulson paint, over a coat of acrylic cement primer after preparation of new plastered surface with thick layer of wall care putty complete all as specified and directed.

Materials and Labour for complete removal of existing treatment from old painted surfaces of walls and applying two coats of weather coat exterior acrylic emulson paint, over a coat of acrylic cement primer after preparation of surface with thick layer of wall care putty complete all as specified and directed

Materials and Labour for applying two coats of synthetic enamel paint over one coat of red oxide primer on new steel and iron surfaces of any description exc 10 cm in width or girth including preparation of surfaces complete all as specified and directed.

Materials and Labour for applying two coats of synthetic enamel paint over one coat of red oxide primer on new steel and iron surfaces of any description nexc 10 cm in width or girth including preparation of surfaces complete all as specified and directed.

Materials and Labour for 15 mm thick screed bed or bedding layer of cement mortar (1:6) for laying/fixing floor tiles complete all as specified and directed.

Materials and Labour for Chequered cement concrete tiles 20cm x 20cm x 25mm thick,set, jointed and pointed in neat cement slurry wth grey cement and pointed with white/coloured cement to match the colour as in paving/foot path etc complete all as specified and directed.

Materials and Labour for sand filling under floors or in foundations including watering and consolidation as base coarse for laying inter locking paver block complete all as specified and directed.

Materials and Labour for machine pressed precast conctete interlocking paver block of 60 mm thick, M-35 Grade of any shape and size as directed by GE confirming to IS 15658-2006, set and laid over sand layer complete all as specified and directed.

Materials and Labour for 75 mm thick PCC 1:3:6 type C-2 (using 40mm graded stone aggregate) as in plinth protection, laid in alternate bays and finished the surface even and fair including making joint at every 3 mtr interval and at corner filled with mixture of bitumen and sand complete all as specified and directed.

Materials and Labour for 75mm thick PCC 1:3:6 type C-2 (using 40mm graded stone aggregate) as in pavement/path, hard standing etc laid in alternate bays and finished the surface even and fair complete all as specified and directed.

Materials and Labour for 100mm thick PCC 1:3:6 type C-2 (using 40mm graded stone aggregate) as in pavement/path, hard standing etc laid in alternate bays and finished the surface even and fair complete all as specified and directed.

M/s KRISHNA CONSTRUCTIONS

M/S K Nath and co

M/S SEWAK SINGH