Loading…
Loading…
Tender Value
₹5 L
EMD Value
₹5,000
Closing Date
11 Sept 2026, 3:00 pm
Commissioner,Edanganasalai Municipality
Edanganasalai Municipality
Construction of Animal Birth and Control Centre Building at FSTP Premises in Edanganasalai Municipality
2026_MAWS_697766_1
2039/2026/E1
Open Tender
Civil Works - Buildings
Works
Edanganasalai Municipality
Refer Tender Notice
2 documents required · 2 mandatory
₹0
₹5,000
25 Aug 2026
25 Aug 2026
11 Sept 2026
25 Aug 2026
11 Sept 2026
25 Aug 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Cement Concrete 1:4:8 (One Cement, Four M.Sand and Eight hard broken stone jelly) using 40 mm gauge hard broken granite stone jelly for foundation including dewatering wherever necessary and laid in layers of not more than 15 cm thick well rammed, consolidated and curing etc. complete. | 1.7 | m3 | - | - |
| 2 | Supplying and filling Crushed stone sand (Commercially called M-Sand) as shown by the departmental officers in layers of not more than 15 cm thick well rammed, watered and consolidated etc. complete complying with standard specification | 1.7 | m3 | - | - |
| 3 | BRICK WORK in cement mortar 1:6 (One cement and Six M.Sand) using Fly Ash bricks of size 230mmx110mmx70mm-virtually the bricks shall be sound compact and uniform in shape free from visible cracks warppage flaws and organic matter.the bricks shall be solid with frog on one of its bearing side. class designation not less than 35 kg/sq.cm an average compressive strength in cement mortar 1:6 one cement and six M.Sand -including neat finishing ,curing etc.,complete complying with standard specification. For Superstructure in Ground floor | 22.1 | m2 | - | - |
| 4 | Plastering with cement mortar 1:5 (one cement and five sand) 12mm. thick in all floors complying with standard specifications. | 221 | m2 | - | - |
| 5 | Plastering with cement mortar 1:3 (One cement and five P.Sand) 20mm.thick in all floors etc, complete complying with standard specification. | 5.5 | m2 | - | - |
| 6 | Centering for soffits of RCC slabs of plane surface like lintels, beams ,etc.,including strutting 3m high using mild steel sheets of size 90cm X 60cm X and B.G 10 stiffened with M.S angles of size 25mm X 25mm X 3mm laid over silver Oak (C.W) joists of size 10cm X 6.5cm (spaced at about 90cm c/c )and supported dy casurina props of 10cm to 13cm dia (spaced of 75cm C/C) complying with standard specification and directed | 16 | m2 | - | - |
| 7 | Providing and laying in position, Standardised Concrete Mix M-20 Grade in accordance with IS:456-2000, using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement content of 325 kg/mᶾ and maximum water cement ratio of 0.55, including admixture (plasticiser / super plasticiser) in recommended proportions as per IS:9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability with about (5 cu.m.) 7730 kg. of 20mm machine crushed stone jelly and with about (3.3 cu.m.) 5156 kg. of 10-12mm machine crushed stone jelly and with about (4.79 cu.m.) 7670 kg. of sand, but excluding cost of reinforcement grill and fabricating charges, centering and shuttering and also including laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor/ roof slabs wherever necessary without claiming extra, etc., complete complying with standard specification and as directed by the departmental officers. The coarse and fine aggregates to be used should comply with the requirements of IS Standards. (No separate payment will be made by the Department for the excess usage of materials). | 0.9 | m3 | - | - |
| 8 | Suppling and fabricating and placing in position MS (or) R.T.S. bar for reinforcement to all RCC works as per the design given including cost of steel and binding wire also in all floors. | 90 | kg | - | - |
| 9 | Painting the wall two coats with approved weather proof Exterior Emulsion paint over one primer coat of over cement plastered wall surface ect., complete c | 221 | m2 | - | - |
| 10 | supply & fixing of MS Door with following specification.MS angles of size 40x40x6mm 3.5 kg/m are used for the outer frmae and MSangles of size 35x35x5mm @ 2.6 kg/m for the shutter frames.Stiffeners with 32x6mm @ 1.5 kg/m MS flat is provided as the lockrail of the door and welded infact on both ends to the shutter frames.18 g CR sheets of best quality is laid as panel in the shutter frames.18 x 5mm @ 0.7kg/m MS flat is welded over the 32x6mm @ 1.50 kg/m MS that on the rear side of the door sandwitching the CR sheet for diagonally on the rear side of the shutter. The rate include coat of all materials, labour charges, transportation, taxes and all other incidental charges etc, complete. | 5.7 | m2 | - | - |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.55 MB
BOQ_838820.xls
BOQ • 0.32 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].