Special repairs to road and hardstanding under GE West Jalandhar Cantt.

Amount

Scarifying or picking gravelled, macadam or bituminous macadam surfaces in area exc 400 Sqm and depth exc 50mm and not exc 100 mm deep including removal of rubbish material not exc 50 m complete all as specified and directed.

M&L for repair to pot holes any depth not exceeding 1 Sqm each including sweeping free from dust and mud, or water scoring sunken surfaces in road path etc cutting around edges, at least 25mm in depth and making good by applying tack coat using paving bitumen VG-10 @ 5 Kg per 10 Sqm, putting in semi dense asphaltic concrete well rammed and sealed with binder using paving bitumen @ 9.8 Kg per 10 Sqm blinded with 0.09 cum stone chipping 6.3mm size and again well rammed (including supply of premixed macadam binder and chippings) and compacted to required gradient with 8 to 12 tonne power road roller, depth of pot hole exceeding 30mm complete all as specified and directed.

Material & Labour for preparing existing black top surfaces by brushing with wire brushes for removing caked mud etc sweeping with brooms and finally fanning the cleaned surfaces with gunny bags to remove all loose dirt and applying evenly a priming/tack coat with paving bitumen VG-10 at the rate of 5 Kg per 10 Sqm of road surface, laying, rolling, consolidating 30 mm thick (consolidated thickness) bituminous premixed asphaltic semi dense concrete with 5.5% binder content (VG-30) by weight of total mix laid with mechanical paver roller and compacted to required camber and gradient and rolled with pressure roller and 8 to 10 tonne power road roller to achieve a uniform smooth surface with Pneumatic vibratory roller complete all as specified and directed. Note: Mix shall be prepared in Hot mix plant as per job mix formula obtained from authorised testing lab and laying will be done by mechanical paver.

Material & Labour for applying evenly a priming/tack coat with paving bitumen VG-10 at the rate of 5 Kg per 10 Sqm of road surface complete all as specified and directed.

Material & Labour for premix bituminous macadam laid, rolled and compacted to required gradient and camber (consolidated thickness not more than 75mm) with paving bitumen VG-30 any penetration @ 4% by weight of total mix laid rolled and compacted to required camber and gradient with 8 to 12 tonne power road roller complete all as specified and directed.

Material & Labour for providing and marking broken centre line /side lines / Zebra lines, dashes, arrows etc. on road pavement and the like of any description and width with thermoplastic paint hot applied with machine conforming to BS-3265 and according to the specification laid down by IRC and MOST (Ministry of Surface Transport) specification 2001 (4th revision) complete all as specified and directed.

Supply & fix solar road stud high polymer of size 125mm x 125mm x 25 mm made from aluminium alloy, solar powered by nionocrystal solar panel, one high capacity Ni-Cd rechargeable battery, available in colour red,amber,green complete all as specified and directed. Make : Dark eye Cat part No. DHRUV (DA-110) or equivalent as mentioned in Appx 'B'

Surface dressing not exceeding 15 cm deep and getting out in soft/loose soil complete all as specified and directed.

Dismantling bricks (laid flat or on edge) or brick tiles in floors, channels, kerbs, aprons etc laid, bedded and pointed in any mortar complete all as specified and directed.

Material & labour for PCC (1:5:10) type E-2 (using 40mm graded stone aggregate) as in foundation filling, mass concrete or sub base in floors etc complete all as specified and directed.

Material & labour for sand filling under floors for paver blocks including watering and consolidation complete all as specified and directed. Note: Punned down thickness shall be measured.

Material & labour for 80mm thick machine pressed precast concrete interlocking paver block and shape and size confirming to IS 15658-2006 of M-40 Grade with grey cement and pigment complete all as specified and directed. The Interlocking Paver blocks shall be procured directly from one of the Manufacturers specified. Note:-The sample shall be got approved from the GE before bulk procurement and lots shall be got tested independently by the GE.

Material & labour for factory made precast cement concrete block, type B1 1:2:4 (20 mm graded aggregate)as a kerb stone masonry with solid block exc 10 cm in width and setting in cement mortar 1:4, filling the gap between road and kerb stone with premix bituminous material ,tamping around and removing surplus spoil and deposited to a distance not exceeding 50m complete all as specified and directed. The kerb stone shall be procured directly from one of the manufacturers specified. Note:-The sample shall be got approved from the GE before bulk procurement and lots shall be got tested independently by the GE.

Demolition of brick work built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed.

Material & labour for brick work with sub class 'B' bricks, old size, straight or curved on plan exceeding 6 mtr mean radius and built in cement mortar (1:6) complete all as specified and directed.

Material & labour for 15mm thick cement plaster in cement mortar (1:4) on fair faces of brick or concrete surfaces finished even and smooth without using extra cement , mixed with water proofing compound complete all as specified. Note : WPC will be measured and paid separately.

Material & labour for preparation of newly plastered surface of walls and applying two coats of cement base paint complete all as specified and directed.

Dismantling floor, hearth or wall tiling/ china mosaic including cement mortar bedding (but not backing), removing rubbish off outside MD land complete all as specified and directed.

Material & labour for 25mm thick PCC (1:2:4) type B-1 (using 20 mm graded stone aggregate), as in leveling concrete in floor finished even & rough to receive top floor layer/finish complete all as specified & directed.

Material & labour for chequered cement concrete tiles size 20 cm x 20 cm x 25 mm thick set and jointed in neat cement slurry in floors/path with grey cement and pigments and pointed in white or coloured cement to match the existing surface laid over and including 15mm thick screed bed in cement mortar (1:6) complete all as specified and directed.

M&L for cutting into existing manhole for connecting new drains and making good for 200/300mm bore pipe and rendering cutting out existing benching and forming branch (1/2 round or ¾ section) channel in plain cement concrete (1:2:4) type B-1 using 20mm graded crushed stone aggregate surface finished even and smooth and reforming benching as required complete all as specified.

Material & labour for mild steel high yield strength TMT bars 10 mm dia and over cut to length bent to shape required, including cranking, hooking ends, bending and binding with and including MS wire (annealed) not less than 0.9 mm dia complete all as specified and directed.

Material & labour for providing precast cement concrete 1:2:4 type B1 (20 mm graded aggregate) set in cement mortar 1:6 as in cover slab for manholes or landing cover, chullah hoods, chajjas, water trough etc complete all as specified and directed.

M&L for extra for forming fair finish to drain or channels 30cm internal girth in cement concrete using extra cement including forms, moulds/mitred stopped ends in manholes etc complete all as specified and directed.

Supply only integral water proofing compound (ISI marked) complete all as specified and directed.

Excavation in trenches, not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation, etc and getting out in soft/loose soil complete all as specified and directed.

Returning filling in layers including leveling watering and well ramming in layers not exc. 25cm thick complete all as specified and directed.

Removing surplus spoil to a distance not exc. 50m and depositing where directed at a level n. exc. 1.5m above the starting point complete all as specified and directed.

Material & labour for cement concrete (1:3:6) type C-2 using 40mm graded stone aggregate as in bed to drain pipe for 150 mm bore pipes including packing under and haunching against the sides of pipes after they are laid and tested complete all as specified and directed.

Supply & fix in repairs 110mm bore PVC (SWR) pipes of pressure rating 6kgf/sqcm, single socketed in any length with rubber ring joints fixed to walls/laid in trenches including necessary cutting chasing etc. complete all as specified and directed.

Supply and fixing of statinless steel pipe 2' high and 2'' dia fitted on 6 mm thick MS plate including stainless steel round ball at top and two Nos SS hooks for holding SS chain complete all as specified and directed.

Supply and fixing statinless steel chain 6mm thick fixed along 2' high and 2'' dia SS pipe complete all as specified and directed.

SATISH AGGARWAL AND CO

DUGGAL CONSTRUCTION CO

M/s Sahib and Company

siddharthenterprises