Provision of Street lighting Arrangement at Sankalp Vatika to Baikunth dham and Parking Area.

Supply and fixing of 9 mtr. G.I. Octagonal pole of approved make (top dia 70 mm, Bottom dia 155 mm & Base plate 16 mm thick) having 3 mm, thickness with single arm bracket length of l mtr. length in 1:2:4 RCC foundation bolt including the cost of foundation, excavation & back filling and Required T & P complete in all respect.

Supply and fixing of 7mtr. G.I. Octagonal pole of approved make (top dia 70 mm, Bottom dia 130 mm & Base plate 12 mm thick) having 3mm, thickness with single arm bracket length of 1 mtr. length in l:2:4 RCC foundation bolt including the cost of foundation, excavation & back filling and Required T & P complete in all respect. with 6fit Pvc Pipe with Radium Strip for Covering of Clamp of Pole as per direction of the E/I

Supply and laying of aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge ,complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc.as per direction of the E/I

(a) 16sq. mm 4 core

(b) 50 sq. mm 3-1/2 core

Supply and fixing of LED Street light Fitting with mandatory driver set having die cast aluminium body with toughend glass UV stabilized PC Cover and lenses suitable for 140 Watt. to 150 Watt.Confirming to IP 66, and IK07 and above protection having Company LOGO Engraved including Labour. (Fixing with 40-50mm dia -5mm thick MS Pipe Bracket, 02No 135x10-15mmx5mm Clamp for Suitable size for pole of difference size, with 5Meter 2.5mm 02Core Alu Cable, 5Meter 40/76wire, 05Amp Bed Switch & Male-Female connector complete in all respect 16800-18000 system lumens, High Power LED with lenses, >120Lm/W, PF>0,95, THD <10% at full load CRI > 70..Potted driver Set in Metal housing (Not Circuitory), Phase to phase Protection at 440V & >300V auto cut and restart feature, 4KV internal Surge Protection, with 5 years warrantee

Supply and fixing of plain or pin type copper tin plated cable socket ( lug ) to the cable leads, insulating with tape and making connection etc. complete in all respect as per direction of the E/I (Pwd Sch rate-18)

(a) 16 sq. mm

(b) 50sq. mm

Supply and burring of safe Earthing electrode T-19 (Hot Dip Galvanized), Length up to 2000mm, outer pipe 50mm inner pipe 25, terminal Dia 12 mm, outer GI Pipe of 16 swg and inner GI Pipe of 12 swg with hot Dip Galvanization up to 100 micron filled with crystalline conductive Mixture (CCM) having anti corrosive & conductive property with 50 Kgs activated soil (BFC) capable of reducing the soil resistivity with good mixture of retaining capacity along with 30 cm square C.I frame with hinged Cover & masonry husing (from electrode terminal to switch board, cost of 25x3 G.I strip will be extra) as per direction of the E/I