REPAIR TO WALL PANELLING, ROOF, JOINERY WORK AND TILLING ETC OF TEMP/PERMANENT BLDGS AT NIMU UNDER AGE(I) NIMU

Amount

Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, roof coverings & wall.

S&F 0.63mm thick Galvanised, corrugated mild steel sheeting with two corrugations side lap, fixed with 'L' type or 'J' type or cranked hook bolts in lieu of screws and washers, in roofs, walls etc. with grade of zinc coating 275.

S&F 0.80mm thick Plain, Galvanised, mild steel sheeting in ridges, hips, valley gutters straight flashings and etc (length and girth as fixed) complete and all as specified and directed.

S & F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.

All as per item No 04 here-in-before but plain steel sheet

S & F fibre glass reinforced translucent corruggated sheeting with two corrugations side lap fixed with L-type or J-type or cranked hook bolts in lieu of screw.

Dismantling timber scantling 40 sqcm and over in section, in any position in unframed work as in rafter, purlins etc.

M&L second class soft wood in clean sawn timber fixed in scantlings as in purlins, rafters etc.

M&L applying two coats of synthetic enamel painting to new surfaces steel based over a coat of red oxide primer exc. 10cm width/girth including preparation of surfaces including filling with filler where required, complete all as specified and directed.

Dismantling floor, hearth or wall tiling incl cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises.

S&F Non - skid coloured Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bedding layer in CM 1:4

S&F glazed coloured ceramic tiles 300x200x 6 to 7mm thick as in vertical surface such as skirting, dado, etc set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles incl 10mm thick plastering in CM 1:3 complete all as specified.

Taking down Chowkhats or frames exc 1.5 Sqm but not exc. 4 sqm each (without taking off shutters from the frames).

All as per item No 13 here in before but n.exc 1.5 sqm each.

Taking down Shutters of any description not exc 1 sqm each.

All as per item No 15 here in before but exc 1 sqm but n exc 2 sqm each.

M&L 2nd class softwood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed.

M&L 2nd class softwood 35mm thick Plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats for doors.

S&F Mild steel 100mm long Butt hinges, medium weight, cold rolled mild steel, and fixed.

S&F extruded aluminium alloy handles, fabricated type, anodised 150mm long.

S&F Aluminium alloy, anodised, sliding door bolt 300mm size with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast alumimnium alloy and fixed.

S&F Aluminium anodised, barrel tower bolt of extruded section and fixed, 150mm long (ISI marked), complete all as specified.

S&F 2nd class softwood 30mm thick glazed and skeleton shutters open rebated and prepare to receive glass, gauge etc divided in squares with plain chamfered or rounded, mitered and rebated with sash bars and provided in windows, ventilators and stiles and rails size of members of shutter as specified in SSR Pt-I Sec 8 clause 8.24(b) supplied and fitted to chowkats.

S&F Butt hinges, medium weight, cold rolled, mild steel 75mm long (ISI marked), complete all as specified.

S&F Aluminium anodised, barrel tower bolt of extruded section and fixed, 100mm long (ISI marked), complete all as specified.

S&F Extruded aluminium alloy handle, fabricated type 'D', anodised, 100mm long (ISI marked), complete all as specified.

S & F 3mm thk sheet glass, ordinary quality and glazing with wooden beading in squares n exc 0.5 sq. m in each pane

S & F 3mm thk pin head type and glazing with oil putty and wooden beads, in squares n exc 0.5 sq. m in each pane

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone concrete glazed with oil putty or fixed with beeds.

Galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire stapples.

M&L applying two coat of synthetic enamel painting to new surfaces wooden based over a coat of pink primer exc. 10 cm width/girth including preparation of surfaces including filling with filler where reqd all as specified and directed

S & F in repairs extruded aluminium alloy handles 150mm size, fabricated type, anodised.

S & F in repairs extruded aluminium alloy handles 100mm size, fabricated type, anodised.

S & F in repairs Aluminium, anodised, barrel tower bolts 150mm size of extruded section and fixed.

S & F in repairs Aluminium, anodised, barrel tower bolts 100 mm size of extruded section and fixed.

S & F in repairs Aluminium alloy, anodised, sliding door bolt 200mm size with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast alumimnium alloy and fixed.

S&F in repair Aluminium die cast body door closer hydraulically designation No 3 universal type suitable for door shutter of 851 to 1000mm in width and weight 61 to 80 kg.

Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness including cover fillets.

Dismantling timber scantling as in fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in section in any position as in unframed work.

S&F 9mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with nails to timber frame work as in walls.

S&F 9mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with nails to timber frame work as in Ceilling.

M & L 6mm thick Plywood, 5 no of ply, grade BWR, type BB, fixed with nails to timber frame work as in Ceilling complete.

M & L Plain fillets. exc. 13 and n.exc 25 Sq cm as in square, rectangular or triangular in section, clean sawn, secured with nails or brads.

All as per item No 43 here in before but exc 3 & n.exc 6 Sq cm in bullnosed, splayed, chamfered or rounded on one or both edges or face as in beading.

M & L two coats of synthetic paint over pink primer on wooden surfaces of any description over 10cm in width or girth.

Demolition in precast cement concrete walling built in cement mortor including all quoins, arches, pillars, etc all as specified.

M&L for PCC 1:3:6 type C-1 using 20mm graded crushed stone aggregate ) block masonry with solid block exc 10cm in width and set as in wall etc in CM 1:4 complete all as specified and directed by EIC.

M&L for Rendering 10mm thick on fair faces of brickwork or concrete surfaces in cement mortar (1:6) and finished even and smooth without using extra cement.

M&L preparing new plastered surfaces of walls and applying three coats of white wash on walls.

M&L for Rendering 12mm thick on fair faces of brickwork or concrete surfaces in cement mortar (1:4) with WPC and finished even and fair without using extra cement (Note : WPC will be measured and paid separately).

Supply only WPC

M&L preparing new plastered surfaces of walls and applying two coats of cement base paint over a coat of primer.

Taking up/down 20mm bore old tubing on walls and connection of size 15mm bore complete all as specified and as directed.

All as per item No 53 here but 25 to 32mm bore.

M &L 20mm bore 3-layer PP-R Polypropylene random copolymer) pipes SDR 7.4 & SDR 11 UV stablised and antimicrobial welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded Polypropylene random fittings fixed complete to walls, ceilings or in floors etc.

All as per item No 55 here but 25mm bore.

S &F in repair 15mm dia Pillar taps cast copper alloy, fancy type with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed fancy type.

Supply only 32mm dia Low density polyethylene (LDPE) pipes of pressure rating 6 kgf/sq. cm

M & L for PVC connection of 300mm long.

S & F in repair 15mm bore Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed fancy type.

S&F in repair 15mm Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed.

S&F in repair 20mm Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed.

S & F in repair PVC valveless, syphonic action type, flushing cistern 10 lts capacity, low level, white, with inlet, ball valve, float and handle including brackets.

S&F in repair Vitreous china wash down water closet pan "Pedestal Pattern" white, with seat white closed pattern with flat bottom and cover mild steel chromium plated or aluminized hinging deviced including flush pipe and joint etc and connection to drain, flushing, pipe, anti-syphonage pipe, and fixing arrangements with fixing bolts etc including making good the disturbed portion of floor in cement concrete 1:2:4 type B-0, as in repairs complete all as specified & directed.

S&F in repair washdown water closet orissa pattern size 580 x 440mm white with integral foot rest and trap, including connection to drain and to flushing pipe including making good to floor and flush pipe and joint between flushing pipe and socket of wepan.

S&F in repair vitreous china wash basin white flat back size 550x400mm (including tap, waste chain and plug and porcelain stopper and brackets all complete.

M/S LOBZANG NORBOO

neelam construction co

ESS AAR ENTERPRISES

H R CONSTRUCTION